create the connection to the datafinder Server

Similar Questions

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• the images are no longer appearing after that I created the test server

  Hi, I'm working on a php site. When I import images files appear regularly in the design window and when I saw witg F12. But once I created the Test Server that they no longer appear. No idea why?

  Hi libdaciu,

  Try to remove the first slash to source path. Update the path of the CBC to src = "gimgs/fandick.png"

  Please try this and then let us know.

• Unable to create the application server connection

  I am creating an application server connection in jdev to my server-91.
  I checked the credentials and I'm getting an error on the test connection IE
  
  JSR-160 LENGTH tests... failed.
  Cannot establish the connection.
  JSR-160 DomainRuntime... skipped tests.
  JSR - 88... skipped tests.
  JSR-88-LOCAL... skipped tests.
  JNDI... skipped tests.
  JSR-160 tests edit... skipped.
  Tests of HTTP... success.
  Test server MBeans model... skipped.
  
  1 of 8 successful tests.
  
  
  -When I check the connection on my server-91, its working fine with the same information of identification, but on my machine, is not.
  I entered the ip of the host proxy and browser preferences.
  
  In my host also file there is the entrance.
  
  Help, please

  can you try to disable the proxy settings in jdev, restart and try again?
  are you sure that your use of the correct server address (no mixup of admin / managed server)

  Published by: Eric Elzinga on October 6, 2010 22:29

• create the SQL server programmatially data source

  Hello

  I would like to create a SQL server by programming in LabVIEW data source. The SQL server version that I used is from 2005. Can someone give some ideas? An example of code will be more favorable.

  Thank you

  Jane

  You can build the connection string you even.  The open function in the Toolbox of data base accepts a string as well (it's polymorphic) who can be the connection string.  This is the site I use to understand.  Is the most common things.  You may need to search Google more specific elements.

  http://www.ConnectionStrings.com/

  If you want to use the other option, someone has achieved a UDL editor in LabVIEW.  You can use this code to create your own UDL which can use the Open DB function:

  https://decibel.NI.com/content/docs/doc-18613

  I have used the above code, so can't comment on that.

• Failed to create the administration server

  Hello gurus
  
  I'm new to Weblogic.i began to learn oracle weblogic 10.0.1.
  
  I created a domain called base_domain.i did not create Admin Server for base_domain.
  
  I want to create server admin asl as well as servers run on existing domain only...
  
  
  Please help on this one.
  
  Thank you
  Yakub

  The "Clustering" section in this post (http://middlewaremagic.com/weblogic/?p=7265) should help you on the way.

• Creating the content server folder

  Hi Experts,
  
  I was exploring Content server as we have obligation where we want our data to be stored / version / wanted.
  For this we have designed WebCenter Content server.
  
  Could you please tell me how to do records / groups / users.
  I went through the help of the tool itself and other docs, but do not get exactly how to achieve this.
  Even I made records and pages (by going to the admin-> Web Layout Editor applet) but unable to find them.
  
  
  Thank you
  Vikas

  This time, you'll have to explain what exactly you did when you say "archived and exported." Steve H. does point out many different methods archives here:

  http://senasystems.blogspot.com/2012/04/replication-between-content-server.html

  Again, I think you should hit the books and to understand what exactly are the expected behavior of your attempts. If you use only the FolderArchiver, then you will only move the folder structure. The content will not be moved as well. The documentation covers a number of migration & replication (docs related to the above article) strategies.

  For your descriptive case, you need to move files & content at the same time.

  I'm not sure of the home page, but maybe the ExtranetLook component has been activated? I think that this affects the page portal.htm as well as a few other basic behaviors. If this is the case, Please remember to read the description of all components (on the page of the component to the server admin & in the docs). Enabling unnecessary components can cause some events that are not easy to remove.

  -ryan

• Cannot start the managed server - Urgent

  I created a Domain Admin Server (7044) and I am able to connect to the server. User later asked to create the cluster, so I created the new server (WSMS1 - 8044) and the new Cluster. For the Cluster I have given the port (7044) the admin and I targeted the data source exist also, but at present I'm not able to start the managed server using the following command in putty - «./startManagedWeblogic.sh WSMS1 http://localhost:8044".» For your information, there is another area (created by any other person) have the same configuration and it works very well.

  Help, please.

  For starting Managed Server use the below command

  ./startManagedWebLogic.shmanaged_server_nameadmin_url(UNIX)

  In your case

  ./startManagedWeblogic.sh WSMS1 http://localhost:7044 /

  Better to use the Ip address of the local host instead of typing of server

• Invitations not sent on the Calendar Server 6.3

  We would be grateful for any help on this. We can give more details if necessary, please just let us know.
  
  Thank you very much.
  
  
  Question:
  
  Our clients calendars server seems to be fully operational and error-free. However, when a customer creates a new event and invites others to attend, no prompt is sent. The creator of the event, however, believes everything is in order, because no error message appears and the guest list is displayed on the event. He worked recently. We tried some things have changed (e.g. disk space, size of files, corruption, recent patching, licenses expiring, etc.), but not him have not yet found something that has changed.
  
  
  Some details of our system:
  
  ./CAL/sbin/csversion
  Oracle Communications Calendar Server 6.3 - 27.01 (built on February 15, 2011)
  SunOS 5.10 xxxx Generic_142909-17 sun4u sparc SUNW, Sun-Fire-V440
  
  
  
  In var/opt/SUNWics5/logs/watcher.log, we get these notices and these errors when restart us the service.
  
  [20/Feb / 2012:12:35:56 + 1300] (Reviews) Request received to restart: store admin http
  [20/Feb / 2012:12:35:56 + 1300] (Reviews) Connecting to watcher...
  [20/Feb / 2012:12:36:00 + 1300] 7698 (opinion)
  [20/Feb / 2012:12:36:00 + 1300] (Reviews) If you stop http server 7704... fact
  [20/Feb / 2012:12:36:02 + 1300] (Reviews) If you stop http server 7705... fact
  [20/Feb / 2012:12:36:02 + 1300] (Opinion) server admin does not work
  [20/Feb / 2012:12:36:02 + 1300] (Reviews) Stopping Server store 7700... timeout
  [20/Feb / 2012:12:37:03 + 1300] (Error) Can not stop Bank server with SIGTERM, now a new attempt with SIGKILL
  [20/Feb / 2012:12:37:03 + 1300] (Reviews) Stopping Server shop 7700... fact
  [20/Feb / 2012:12:37:05 + 1300] (Reviews) Ex-store server... 7718
  [20/Feb / 2012:12:37:05 + 1300] (Reviews) Verification to store the State of the server... ready
  [20/Feb / 2012:12:37:07 + 1300] (Reviews) Starting the server admin... Looked at 'csadmind' process 7725 ended abnormally
  7725
  [20/Feb / 2012:12:37:08 + 1300] (Reviews) From http server... [20/Feb / 2012:12:37:08 + 1300] (Reviews) Request received to restart: store admin http
  [20/Feb / 2012:12:37:08 + 1300] (Reviews) Connecting to watcher...
  ... 7727
  [20/Feb / 2012:12:37:13 + 1300] 7698 (opinion)
  [20/Feb / 2012:12:37:13 + 1300] Store (error) has failed two times in 600 seconds, they will not restart
  Looked at 'csadmind' process 7844 ended abnormally
  
  
  What we did:
  
  We had db_verify and csdb - v check on data bases. ics50deletelog.DB had corruption, we who fixed using db_dump and db_load to export, and then import the data bases.
  We also served the ics50deletelog.db database with the help of cspurge later in the discharge and charge do not seem to have had an effect.
  We have tried to put the log level upward in the opt/SUNWics5/cal/config/ics.conf, but did not have more details when you restart the service (via /etc/init.d/sunwics5 restart)
  
  Before that we had the db_dump and db_load purge:
  
  Calendar database version: 4.0.0
  Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
  
  Total database size in bytes: 1465503744
  Total number of calendars: 14964
  Total number of events: 830842
  Total number of tasks: 17351
  Total number of alarms: 57181
  Total number of entries of gse: 9
  Total number of entries of main component: 24100
  Total number of entries deletelog: 1779967
  Logfile total size in bytes: 79262
  
  Session database version: 3.0.0 [BerkeleyDB]
  Total database size in bytes: 0
  Logfile total size in bytes: 0
  
  Meter database version: 1.0.0 [memory mapped files]
  Total database size in bytes: 0
  
  
  After the db_dump and db_load the purge:
  
  Calendar database version: 4.0.0
  Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
  Total database size in bytes: 1201864704
  Total number of calendars: 14964
  Total number of events: 830845
  Total number of tasks: 17351
  Total number of alarms: 55116
  Total number of entries of gse: 9
  Total number of entries of main component: 24100
  Total number of entries deletelog: 1779967
  Logfile total size in bytes: 5251612
  
  Session database version: 3.0.0 [BerkeleyDB]
  Total database size in bytes: 0
  Logfile total size in bytes: 0
  
  Meter database version: 1.0.0 [memory mapped files]
  Total database size in bytes: 0
  
  
  Thanks again.

  Sounds like we're talking about 'Notifications of events Invitations '. These are notifications that is sent when someone invites you to an event. If you get the notification or not depends on your preference stored in ldap. This can be set using the Convergence to navigate through the Options-> calendar-> notifications (check "Notify me by email of new invitations or modifications of the invitation"). The attributes below is actual ldap that is stored in the user input.

  icsExtendedUserPrefs: ceNotifyEnable = 1
  icsExtendedUserPrefs: [email protected]

  In the following cases (participant) user won't get notifications even if the preference above is defined.

  a > creating an event with participants in the past. CS6, by default, removes the notifications of past events. You can turn notifications of past events by setting the configuration 'ine.pastnotification.enable' on 'Yes' in ics.conf

  b > if the client creating the application server event does not send notifications. (smtpNotify wcap param to storeevents.wcap). Outlook Connector uses this param wcap, so you won't get notifications server for events invited using Outlook Connector. Outlook Connector sends that is own notifications directly.

  According to me, you are looking for this kind of notifications. The process responsible for sending these notifications is "csadmind" on the Frontend. So, you must check the admin.log on the Frontend to see whether or not it is sending notifications.

  Published by: dabrain on February 21, 2012 09:26

• Question about the listener and the process server in dedicated server mode

  Hello
  
  The Oracle documentation says that, when a client connection request is received on the server, the receiver creates a process server who will work with the database instance to perform the tasks requested by the user/client process. So far, everything was good.
  
  Now, when the user is on the Oracle himself server, the listener didn't need to run to establish a connection to the database. Therefore, it is possible to stop the Listener and not always connect using sqlplus and a valid username and password.
  
  In the case above, the question is: if the listener does not work, what/who created the process server that communicates with the instance of the database on behalf of the user? In other words, in the normal case, the listener could get the request and create the server process. When the listener does not work what part of the Oracle Gets the requests and creates the server process?
  
  Clarification on how this case is handled are very much appreciated, thank you,
  
  John.

  440BX - 11 GR 2 wrote:
  Hello

  The Oracle documentation says that, when a client connection request is received on the server, the receiver creates a process server who will work with the database instance to perform the tasks requested by the user/client process. So far, everything was good.

  Now, when the user is on the Oracle himself server, the listener didn't need to run to establish a connection to the database. Therefore, it is possible to stop the Listener and not always connect using sqlplus and a valid username and password.

  In the case above, the question is: if the listener does not work, what/who created the process server that communicates with the instance of the database on behalf of the user? In other words, in the normal case, the listener could get the request and create the server process. When the listener does not work what part of the Oracle Gets the requests and creates the server process?

  John,

  I guess that you have asked the same thing in a different form in another thread. In the case, when the process of the user and the server is to be on the same side, the communication done by using the Protocol bequeth and the user, since it is not not going to use a (@) sign, he would use a default service for connected sys$ users .

  HTH
  Aman...

• the archiving server

  We just migrated applications 7.1 to 11.1. The server that hosted 7.1 will be downgraded to in a few weeks. I want to make a backup of all applications on the Server 7.x and fix them. Could you please tell me how to do?
  
  I just tried this command on all cubes that I wanted to save. The file to archive output only the list of names of files in the app! No data! You are not sure if I understand any archive backup and recovery?
  
  * + < code start > * _
  
  CONNECTION < supervisor id > < password > on server71.americas.com;
  COIL on '\\server71.americas.com\essbase\appfiles\Migration\inf\BackupOldServer.inf ';
  
  CHANGE the database ARCHIVE of START SalesAPP.SalesDB file "D:\\Appfiles\\ARCHIVE\\SalesApp_SalesDB";
  
  Exit;
  
  * + < end of code > * _
  
  Also another thing to note is that there is a disk partitions on the old server which will be decommissioned. But on the new server, there is no any which disk partition so I'm not sure archive created the old server (7.1) can be restored to the new server (11.1). Help, please!
  
  Thank you!!

  the only thing your ordering of archive begin done on the server is to make the database to read only for some backup software could check in. As a better solution especially if all your data on your databases is loaded at the zero level would be to perform at a level zero export of all your data and then save the scripts of calc, reports, outlines of rule files, etc.. If you have export the column format, you could even bring in some parts of databases with rules files. A couple of caveats
  1. it will not work on databases ASO in 7, you must back up the directory
  2. If your database is very large, it could be problemic, although zero level data export is only much smaller
  3. If you are loading to levels other than zero (as for budgeting), then you need to export all levels of data. If zero, then you would just reagg the re-imported database.

  In any case, I would make sure that if all of this is backed up on tape, retension period is long enough for your needs. Before the server is out of service, I suggest you also a test they can actually restore the files. I saw him too often that files are not recoverable

• create the cookie using pl sql and retrieve values

  Hello
  I am currently in an urgent need to create cookies to BE oracle and also read the values of the. I tried to use code below. his display error
  code
  DECLARE
  ourcookie owa_cookie.cookie;
  BEGIN
  ourCookie: = owa_cookie.get('SESSION2');
  END;
  /
  
  BEGIN
  
  owa_util.mime_header ("text/html", FALSE ");
  
  -Create a cookie
  (owa_cookie). Send
  name = > 'SESSION. "
  value = > '344444',.
  expires = > sysdate + 2,.
  path = > ' / ');
  
  
  owa_util.http_header_close;
  
  EXCEPTION
  WHEN OTHER THEN NULL;
  
  END;
  
  
  But when I'm reading the cookie that I created, I am unable to exercise
  
  -It's for reading cookies
  DECLARE
  ourcookie owa_cookie.cookie;
  BEGIN
  ourCookie: = owa_cookie.get('SESSION2');
  END;
  /
  
  error:
  ORA-06502: PL/SQL: digital error or value
  ORA-06512: at "SYS." OWA_UTIL", line 325
  ORA-06512: at "SYS." OWA_COOKIE', line 36
  ORA-06512: at "SYS." OWA_COOKIE', line 140
  ORA-06512: at line 4 level

  842106 wrote:

  Now according to the guidelines of your comment, I created a simple OWA environment and run the code below. Now I get not found error of data

  ORA-01403: no data found
  ORA-06512: at line 23

  The error is caused the cookie is not found.

  The following is not valid - as there is no browser to receive the cookie:

  (owa_cookie). Send
  name-online "SESSION1"
  value-online '344433',
  expires => it sysdate + 2,.
  => path ' / '.
  );

  The following code must set the CGI environment - and add the cookie to the environment for the following code to read (as shown in the code example that I posted in the 2nd thread I talked to you):

  / * Initialization * /.
  OWA.cgi_var_name (1): = 'something ';
  OWA.cgi_var_val (1): = "other";
  OWA.init_cgi_env (1, owa.cgi_var_name, owa.cgi_var_val);
  / * End initialization * /.

  Of course, the following code will fail with a NO_DATA_FOUND there is no cookie.

  ourCookie: = owa_cookie.get('SESSION1');
  v_session: = ourCookie.vals (1);

  So it is not possible to create a true cookie and retrieve the value of CGI environment or apex not?

  Yes. But the web browser is non-existent. Then, you need create the CGI environment, which would have created the web server, before you call your allowed web code PL/SQL.

  In other words, if your initialization code of CGI should pretend that it is the web server, he received the call from web browser, it received the cookie (s) from the web browser - and now she needs to create the CGI (including cookies) environment for this web browser, and then call the procedure PL/SQL referenced by the browser in the URL, he argued.

• OIA 11.1.1.5 - IOM 11.1.1.5 integration can not see the Provisioning Server

  Hello world
  
  I'm trying to integrate the IOM and OIA, I followed the steps that appear on http://docs.oracle.com/cd/E24179_01/ doc.1111 /e23377/integratingwithoimpreferred.htm #BABBEBFC, but when I need to create the provisioning server I do not see the Oracle provisioning server.
  
  I changed all the required files and double checked what they where saved and restarted the server OIA but no change.
  
  I have deployed OIA and IOM on the same area of WL 10.3.5, they are also on Windows Server 2003.
  
  Please I will appreciate any help you can give me.
  
  Kind regards
  Camila

  Hi Alex,

  Thanks for the reply, I forgot to update the post earlier, but I managed to solve the problem.

  When I set up the integration I did all the steps of the integration Guide including the amendment of the context.xml file - iam. It's because OIA is deployed on a Weblogic managed server, so when a change is made on all the files located in the RBACX_STAGING folder, the deployment must be updated.

  Kind regards
  Camila

• Failed to create the connection to the Oracle Java Cloud Server

  Hi all

  I'm deploying simple ADF Oracle Cloud application.

  I am transferred HR diagram to my cloud database service and now I'm trying to create a connection to the instance of oracle java cloud service

  but it's not to create a connection to the cloud server and throwing the error message

  
  

  Tests of cloud-Admin... has failed.

  listApplications failed.

  Check the username, password, domain, for example.

  Check the location of the sdk cloud & version: Tools-> Preferences-> Oracle Cloud

  0 out of 1 tests successfully.

  Here are the details MyService

  JDEV: Build JDEVADF_11.1.1.6.0CLOUD_GENERIC_121118.1600.6229

  Cloud-version: 13.2.2.0.0

  I'm sure, that I am using the appropriate powers since am capable of service cloud console java with the same credentials.

  Please help me on this.

  Thank you

  Check the location of the SDK by browsing "Tools-> preferences-> Oracle Cloud-> Cloud Service SDK Java", navigate to the folder and navigate to the directory of sup 'lib '. Check the version with the command:

  java-jar javacloud.jar - version

  Oracle Cloud Java Deployer of Service tool.

  Version: 13.2.7.0

  What is the version that was posted to you? If something else "13.2.7.0" try to download the latest version of the SDK, unzip it somewhere and point your Jdev on the new version.

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• Failed to create the connection to the server application using jdev

  Hi"
  
  I'm unable to create the connection to the server using JDeveloper 10.1.3.1 version after "configuration Service 10.1.3.1.0 with 10.1.2 Oracle Internet application Identity
  
  Directory"I followed" Guide the administrator Oracle® BPEL Process Manager 10 g (10.1.3.1.0) "part number B28982-03".
  URL-> "http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#BABIBGFF".
  
  I was successfully able to integrate and capable "2.1.3.3 step 3: the Oracle Internet Directory test Configuration.
  
  But now when I try to establish a new connection to the application server with JDeveloper it gives below error.
  
  error: No process OC4J up AS instance identified by field: opmn oc4j_soa + oc4j-hostname-6003-default
  
  Please advice,
  
  Thank you
  Yatan
  
  Published by: Yatan on June 30, 2009 15:05

  What is the result of opmnctl status - app? You give the right opmn... other datails as and IS &?