Create the Recovery Plan

Similar Questions

• After execution of the recovery plan, the Test is greyed out

  I missed successfully test on 2 virtual machines running the recovery as part of our POC plan.  I have powered down VMS protected and recovery, initiated a resynchronization on the volume of SnapMirror and intend to continue to use the same recovery plan for additional tests.  However, the Test option for the recovery plan is dimmed (Run option is still available).  What I need to remove the stimulus plan and recreate a whenever I run a Run and not a Test?  It is a chore because I need to re-add the customizations (messages, orders), update priorities and so on.  I use SRM v4.1.1.

  Hello

  You need to re - create groups of Protection that is pushed. Stimulus plans do not need to be re-created, but you will need to reconfigure to include recreated protection groups. All customizations related to virtual machines (priorities, orders, customizations) must be configured again.

  It was a case in the 4.x versions, don't think that changed in 5.0.

  Michael.

• Re: Unable to create the recovery DVD

  Hello

  Here I once again m.

  The seller told us to create a recovery DVD (CD).

  I go to Toshiba-files and click on create the recovery CD and the programm "told" to insert 1 of 2 DVDs.
  I did.

  But after awhile the laptop end / cut in writing.
  He can't write E:\Boot\fonts\chs-boot.ttf second message, I try a front message, I don't remember, but something like the second)

  So now I can't create the recovery DVDs

  What to do now?

  Thanks for the replies

  Toshiba satellite L550D 13V P * SE (* = I remember - you can see exactly to my other question about catalyst)

  Hello

  The seller tells you good advice. You should do it. I recommend you try a dvd - r blank of high quality like Verbatim or Tdk. You see, creator DVD doesn't accept poor quality, media.

  Read this thread, please:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=55751&TSTART=0

• Satellite A300-15 has failed to create the recovery disk

  I'm trying to create the recovery for the first time disk (portable purchased before 5 days) and stop just before the end, the creator:

  Cannot read the file.
  F:\06343XSP5. STORMWATER MANAGEMENT
  (Error code: 020150-20-00000000)

  What's not?

  I posted this already in another thread, but I can repeat it;

  I noticed that not all DVDs are compatible and sometimes it of not possible to burn the recovery due to the problem of DVD DVDs.
  I put t know what DVD discs you use, but I had a good experience with TDK DVD-R.

  So my advice is simple; Try different DVD from different manufacturers

• Recovery disk for a T130: Re-create the recovery disk

  Hello

  I own a Toshiba T130, white model that comes with Windows 7 x 64, 4 GB of RAM and a DVD player. I recently tried to install a Linux operating system through a process that is automated via a network installation (Shoemaker), which has actually wiped clean the hard drive before installing the system, contrary to my intention at first actually install it on a separate partition, along side windows!

  It happens that (day 1, after having bought the laptop), I have already saved/stored the folder of HARD disk recovery (integer) initially placed on a second partition in Windows 7, on an external USB hard drive, but did not have a DVD or USB recovery media as it is recommended. The content of the file is as follows:

  + HDDRecovery
  + ODDFiles
  | + Start
  | + EFI
  | + HDDPREP
  | + HTMPREP
  | + Sources
  | + Tools
  + OriSetenv
  + Swing
  | 10347XSP.swm
  | 10347XSP2.swm
  | 10347XSP3.swm
  | 1034...
  | 10347XSP8.swm

  I think that these files are what is needed to create a recovery media and I have a need to restore my computer to its original state and recreate my Windows 7 environment. After all, it is here where I get my work.

  So, you guys don't know if I can build a support of restoring these files? If so, what is the procedure?

  Thank you very much
  Waiting for your response.

  -Ilyes Gouta

  As far as I know is now too late for the creation of recovery disks. If I remember well in s manuals is clearly described that you can install OS using only two procedures: using installation of recovery of HARD drive or using created the recovery DVDs (connected external USB optical disc drive).

  I'm 99.9% sure that the installation of the external HARD disk is not possible.

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• Satellite U500-17F - problem of calibration by trying to create the recovery disk

  I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
  The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

  Hello

  I had a problem with a different disc from different manufacturers.
  Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

  Test other brands!

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• HOW TO CREATE THE RECOVERY PARTITION IN WINDOWS 7

  Hello world

  Please suggest me the recovery partition created in windows 7 64 bit... or please give the Hp software uses to create the recovery partition...

  - -
  Kumar fabf

  Either use the builtin for 7 imagery or try my choice Custom recovery options

• HP slimline s511uk recovery dv: created the recovery for hp s511uk disc

  Hello world.

  We have created the recovery for hp slimline s51uk disk but have lost their so you can't buy them on the hp Web site.

  We have tried our products without any success.

  We want to change the disk ssd as the original has os.

  I don't want not to clone the SSD with the software as theres no gurantee it will work.

  Just install fees usig recovery for ssd drive

  Hello:

  You can try this and see if it works...

  Use the product key (if you can still read all 25 characters of the product key for W7) on your PC case to install the operating system provided with your PC.

  Here is the direct link to the Digital River Microsoft W7 x 64 Home Premium SP1 ISO file.

  http://msft.digitalrivercontent.net/win/X17-24209. ISO Windows 7 Home Premium x 64 English

  Make sure you get the entire file to download.  Sometimes, he reports full download, but you don't have the file xx GB 3. any.

  Then use either your option of the ISO to burn to the DVD burning program to burn the file on a DVD so that it is bootable.

  Burn at the lowest speed as possible.

  Or, use this tool to transfer the file to a Flash DRIVE 4 GB or a DVD.  This tool will also support bootable.

  http://www.Microsoft.com/en-us/download/Windows-us b-dvd-download-tool

  Then go to the support page of your PC to get the driver and software you need.

• Backup in Windows XP Wizard allows no choice of drive to create the recovery disk

  Backup Wizard requires a 3.5 floppy to create a system restore disk. When my system and many others have more 3.5 disks... How to solve?

  Original title: windows xp absence of 3.5 diskettes and Backup Assistant

  Hello JohnAdams2461,

  You're right, that Windows XP requires a floppy drive to create the recovery disk.
  Most newer systems do not have a floppy drive.

  View information in a previous thread with the same question.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cant-create-system-recovery-disk-using-backup/a3e2312b-006D-4f80-940c-254e5f00f1acz

  Best regards, k

  Marilyn

• Create the recovery disk

  I have a pavilion dv6 Windows 7 and he needs a reconstruction. It doesn't have a D: partion but I wanted to play it safe and to create the recovery disk set in case there was a problem with the drive D. I bought some Maxell dvd + R disc but are not accepted by this utility.

  According to the utility I use either + r or - R disc, why did he not accept

  Thanks for any constructive help

  Get your product number by pressing Fn + ESC key or check the Service tag on the bottom, may be under the battery.

  Go to 'Support & drivers' at the top of this page. Enter your product number. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Recovery media should be listed as an option to purchase, if you live in the United States / CA. usually around $17.

  If a recovery media is not listed, use the link that I posted above to get the phone number. Often if you support your software fails to create the set they send a free of charge.

• Failed to create the recovery dvd set... advice?

  Just got a new laptop dv7-1240us brand.

  When I try to create the recovery DVD, it seems to go through the first creation of dvd, and then gives me the following error message:

  Error detected during the disk check.

  A new drive should be created.

  I have 4 dvd Memorex coasterized this so far.  Is there something I could do wrong?

  This error code is very comman problem do a recovery media. Given that this product is still under warranty call 1-800-474-6836 and talk to the hp tech agent. Basically, explain the tech agent I have tried several times to create my recovery media, but he receives on the disk 1 can you please send them to me it's really frustrating. The recovery media must be sent free of charge.

• "Can't find the necessary files" cannot retrieve or create the recovery disk. Help!

  I can't refresh PC or create the recovery disk. He keeps going with error message "Cannot find the necessary files" and tells me to insert the recovery media. There is no system restore point, and I've upgraded to Windows 7 Windows 8 Pro without a disc, so I can't do anything. Help! Strangely, nusrmgr.cpl disappeared, although I had seen the shortcut a few weeks ago (no, I'm not deleting it).

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Why are you trying to cool off the computer?

  2 are you facing problems with Windows 8?

  3. how many accounts is configured in the computer?

  You can scan the file system (CFS) auditor. This will replace the corrupted Windows files.

  Follow these steps:

  (a) start the desktop view.

  (b) open the command prompt, right-click in the left corner when the windowappears, and select prompt (admin).

  (c) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  You can also try to create a new user account and check if the problem persists.

  If the problem persists, you will need the DVD to perform repair installation of Windows 8. If you download the installation of Windows 8 files, check your emails, there should be a link to download an ISO file. Download and burn the file to a DVD.

  The DVD to perform the repair.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.