Recovery disk for a T130: Re-create the recovery disk

Similar Questions

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to create capture instant for VM1, error-3941 (create the snapshot has failed)

  I vSphere 4.0.0 208111 using VDR 1.1.0.707 appliance for backup of a Windows Server 2003 SP2 with VMware tools installed (including the VSS component).

  I am unable to back up a VM, but can save all other virtual machines.

  Have tried to re - install VMware tools, ensuring Windows VSS patches are up to date.

  I can do a ntbackup to system within the virtual machine with success status.

  Impossible to find someone else suffer the same error with-3491, create the snapshot has failed.

  Any ideas?

  Paul

  To simulate a VDR initiated snapshot, try a manual snapshot of the virtual machine and see if it passes or fails.  If it fails, then that explains the error 3941.  Be sure to uncheck the memory status and check the comments of quiesce file system option during an attempt of the manual snapshot because it will mimic the snapshot operation that initiates the VDR.

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• Re-create the folder guest account

  Hi all

  I deleted the folder guest account. Now when I connect to the guest account, I get a message "you are connected with a temporary profile.

  Is it possible for me to re-create the folder comments once again?

  Thank you

  Why did you even have to activate the account invited in the first place? It is disabled by default for a very good reason security - it allows anonymous access on your computer.

  Turn it off immediately.

  If you want to grant the occasional access to your computer for visitors, create a Standard user account and call it 'Visitor' or somesuch.

  Do NOT use the guest account.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• Satellite A300-15 has failed to create the recovery disk

  I'm trying to create the recovery for the first time disk (portable purchased before 5 days) and stop just before the end, the creator:

  Cannot read the file.
  F:\06343XSP5. STORMWATER MANAGEMENT
  (Error code: 020150-20-00000000)

  What's not?

  I posted this already in another thread, but I can repeat it;

  I noticed that not all DVDs are compatible and sometimes it of not possible to burn the recovery due to the problem of DVD DVDs.
  I put t know what DVD discs you use, but I had a good experience with TDK DVD-R.

  So my advice is simple; Try different DVD from different manufacturers

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite P300-1CN - failed to create the recovery disk

  Hi, I tried to create the disks of backup for my new P300-1CN recovery, but I get a power calibration error (error code: 0E01B5-26-00037304) when the progress gets 50% on the first disc of "current" bar and 25% along the bar of"progress".

  I have now tried 3 times and exactly the same thing happens every time.

  I have the cable power in and power on a full battery.

  Any ideas?

  G.

  Hello!

  Have you tried the disks from different manufacturers? I prefer to use DVD - R Verbatim and TDK discs.
  Check it!

  Also on the site of Toshiba, I can find a few updates firmware for the CD/DVD drive. Check if you have such a unit and update the firmware.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite R630-13D: failed to create the recovery disk

  I have a similar problem. I have a Satellite R630-13 t and tries to use the Toshiba recovery Media creator to create restoration 2 DVD discs.

  When you try to create the first disc, I get the following message:

  Cannot read the next file.
  E:\Boot\fonts\chs_boot.ttf
  (Error code: 020150-20-00000000).

  I get a similar message when you try to create the second. I tried four times. On my last attempt, I disabled the protection in real time on my virus checker (Windows Security Essentials) - I don't know how to close down completely, not sure you can. I also turned off wireless and bluetooth.

  I need to create these discs please. I use anti-scratch Philips DVD + RW 4.7 GB 120 Min 1-4 x speed discs.

  I know that someone else mentioned to try a different type of disc but I just bought these for this purpose and don't really want to buy more if I can help it. The disc type is certainly not a problem? When I look at the disc in the drive, they have files on them - even the file that the error message above says that he could not read.

  Thank you
  Ian

  I had similar experiences in the past and I can say that, after several tests using different types of media, I was able to create recovery discs using DVD-R only media.

  Hey two disks empty buddy aren't really expensive so don't waste your time here awaiting a solution and buy two or three empty DVD-R discs and create recovery media.
  Another tip: do not buy some cheap stuf but high quality TDK or Verbatim discs.

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• HP slimline s511uk recovery dv: created the recovery for hp s511uk disc

  Hello world.

  We have created the recovery for hp slimline s51uk disk but have lost their so you can't buy them on the hp Web site.

  We have tried our products without any success.

  We want to change the disk ssd as the original has os.

  I don't want not to clone the SSD with the software as theres no gurantee it will work.

  Just install fees usig recovery for ssd drive

  Hello:

  You can try this and see if it works...

  Use the product key (if you can still read all 25 characters of the product key for W7) on your PC case to install the operating system provided with your PC.

  Here is the direct link to the Digital River Microsoft W7 x 64 Home Premium SP1 ISO file.

  http://msft.digitalrivercontent.net/win/X17-24209. ISO Windows 7 Home Premium x 64 English

  Make sure you get the entire file to download.  Sometimes, he reports full download, but you don't have the file xx GB 3. any.

  Then use either your option of the ISO to burn to the DVD burning program to burn the file on a DVD so that it is bootable.

  Burn at the lowest speed as possible.

  Or, use this tool to transfer the file to a Flash DRIVE 4 GB or a DVD.  This tool will also support bootable.

  http://www.Microsoft.com/en-us/download/Windows-us b-dvd-download-tool

  Then go to the support page of your PC to get the driver and software you need.

• Unable to create the 3rd recovery disk

  Hello
  I am
  get an error when you try
  to create the 3rd DVD+ R.when it check 2% who say the message "that we live."
  Recovery media errors
  creation. Please try again. »

  Pavilion dv6-6113tx
  number-LZ765PA
  Core i5 W7 home premium
  pls help
  Sohag

  Hello

  Here's another suggestion that may help.

  Start Notepad and let Windows load completely.  Hold down the Windows key and press R.  For the run box, type msconfig and press ENTER.  In the System Configuration window, click the Startup tab, uncheck the box next to each startup item and then click on apply to apply the change.  Restart the computer and see if you can now get 3 disc to burn and check - as I suggested earlier, if it creates all the other disks before starting the window System Configuration and re - allows objects of start - stop and try again.

  Kind regards

  DP - K

• Create the recovery disk

  I have a pavilion dv6 Windows 7 and he needs a reconstruction. It doesn't have a D: partion but I wanted to play it safe and to create the recovery disk set in case there was a problem with the drive D. I bought some Maxell dvd + R disc but are not accepted by this utility.

  According to the utility I use either + r or - R disc, why did he not accept

  Thanks for any constructive help

  Get your product number by pressing Fn + ESC key or check the Service tag on the bottom, may be under the battery.

  Go to 'Support & drivers' at the top of this page. Enter your product number. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Recovery media should be listed as an option to purchase, if you live in the United States / CA. usually around $17.

  If a recovery media is not listed, use the link that I posted above to get the phone number. Often if you support your software fails to create the set they send a free of charge.

• Create the recovery disk - operating system developed at level

  When I got to my x 201, I got Win 7 Home and I created the recovery disks. I then upgraded to Windows 7 Professional and I tried to create the new recovery but message says system recovery cannot be created only once.

  I can create the new collection to reflect the Win7Pro?

  Thank you very much for the help.

  pit says:

  I can create the new collection to reflect the Win7Pro?

  Thank you very much for the help.

  Hello, ditch,