create the restore disks

Similar Questions

• How to create the restore disks

  original title: how to create a system restore disks for my computer restore disks
  Thanks, mb

  Contact the manufacturer and they will tell you how if possible.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not turn HARD drive restore or create the restore on Satellite A135-S4727 disc

  Hello

  I have an A135-S4727 (Pentium dual core, 2 GB of ram, windows vista, 160 GB HDD).
  Recently, I decided to use my HARD drive recovery funtion to restore OTB ' cos I wasn't satisfied
  the way I use my hard drive.
  My system did not come with a recovery disk and recovery disc creator software (I checked it when I arrived but)
  has been re-insured by the fact that the hidden partition has been and is still intact)
  I just thought that I would start from the hard drive recovery console, whenever I needed.
  I tried to do this for always (now pressed zero, hit) but it boots to windows in any case.

  I am so angry and frustrated rite now ' cos I am out of warranty and do not know why I should come on a forum to find a way to restore my laptop.
  I googled the web for 2 days now and nothing other than similar complaints found...
  Toshiba... (X-)
  The right and the ability to restore its system is a given... (unless you plan to charge us a pc falls down for reasons every time you guys don't even know most of the time)

  Please someone end to this nightmare and tell me what to do and how...

  Boyfriend sorry but to be honest I put t understand you complaint;
  The newest series of laptops is not delivered with the recovery disk but is equipped with Toshiba HDD recovery option.
  This option can be used to retrieve the laptop computer from the HARD disk, and there is also an option to create the recovery disk.
  This recovery disk can be used if something goes wrong with the HARD drive or partition from the image on the HARD drive.

  It s highly recommended to create the recovery DVD!
  And this info is in the manual of the user who is always pre-installed on the laptop!
  I also found this info here in the user manual that can be consulted online on the Toshiba page we (the Satellite A135-S4727 is a laptop in US)

  Check it out here * 56, page of the user guide: *.
  [Satellite A135-S4727 Manual: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1757708& rpn = PSAD0U & SelCategorie = 3 & selFamily = 1073768663 & odel selM = 1757708% 7CPSAD0U #]

  Here you will find details how to create the recovery disk.
  I put t know how you manage a unit bought new but if I buy a new device, then the first I do is consulted the user manual that comes with this device.

  In any case; I think you can order a new disc of recovery of the ASP in your country

  Good bye

• Backup in Windows XP Wizard allows no choice of drive to create the recovery disk

  Backup Wizard requires a 3.5 floppy to create a system restore disk. When my system and many others have more 3.5 disks... How to solve?

  Original title: windows xp absence of 3.5 diskettes and Backup Assistant

  Hello JohnAdams2461,

  You're right, that Windows XP requires a floppy drive to create the recovery disk.
  Most newer systems do not have a floppy drive.

  View information in a previous thread with the same question.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cant-create-system-recovery-disk-using-backup/a3e2312b-006D-4f80-940c-254e5f00f1acz

  Best regards, k

  Marilyn

• "Can't find the necessary files" cannot retrieve or create the recovery disk. Help!

  I can't refresh PC or create the recovery disk. He keeps going with error message "Cannot find the necessary files" and tells me to insert the recovery media. There is no system restore point, and I've upgraded to Windows 7 Windows 8 Pro without a disc, so I can't do anything. Help! Strangely, nusrmgr.cpl disappeared, although I had seen the shortcut a few weeks ago (no, I'm not deleting it).

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Why are you trying to cool off the computer?

  2 are you facing problems with Windows 8?

  3. how many accounts is configured in the computer?

  You can scan the file system (CFS) auditor. This will replace the corrupted Windows files.

  Follow these steps:

  (a) start the desktop view.

  (b) open the command prompt, right-click in the left corner when the windowappears, and select prompt (admin).

  (c) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  You can also try to create a new user account and check if the problem persists.

  If the problem persists, you will need the DVD to perform repair installation of Windows 8. If you download the installation of Windows 8 files, check your emails, there should be a link to download an ISO file. Download and burn the file to a DVD.

  The DVD to perform the repair.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• Satellite U500-17F - problem of calibration by trying to create the recovery disk

  I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
  The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

  Hello

  I had a problem with a different disc from different manufacturers.
  Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

  Test other brands!

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• Create the recovery disk

  I have a pavilion dv6 Windows 7 and he needs a reconstruction. It doesn't have a D: partion but I wanted to play it safe and to create the recovery disk set in case there was a problem with the drive D. I bought some Maxell dvd + R disc but are not accepted by this utility.

  According to the utility I use either + r or - R disc, why did he not accept

  Thanks for any constructive help

  Get your product number by pressing Fn + ESC key or check the Service tag on the bottom, may be under the battery.

  Go to 'Support & drivers' at the top of this page. Enter your product number. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Recovery media should be listed as an option to purchase, if you live in the United States / CA. usually around $17.

  If a recovery media is not listed, use the link that I posted above to get the phone number. Often if you support your software fails to create the set they send a free of charge.

• How to create the hard disk volume/partition in windows 8?

  I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?

  I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?

  shrink the volume c: http://www.sevenforums.com/tutorials/2672-partition-volume-shrink.html

  Then create a new volume u want http://www.pcandtablet.com/windows-8-drivers/1216/how-to-extend-volume-in-widows-8-and-take-extra-space-for-a-drive.html

• Unable to create the virtual disk: fault. RestrictedVersion.summary

  Hello

  Im trying to create a virtual disk using the CLI on ESX4i.  The script is:

  vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk

  When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary

  Can someone tell me why please.  Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).

  The file system is THAT VMFS 3.33 maximum file size is 256 GB.  The block size is 1 MB.  If it is the block size that is the problem how can I easily change?

  It's in a laboratory, not a production environment.  I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.

  Thank you.

  Mike.

  If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.

  -Matt

  VCP, vExpert, Unix Geek

• Create the recovery disk - operating system developed at level

  When I got to my x 201, I got Win 7 Home and I created the recovery disks. I then upgraded to Windows 7 Professional and I tried to create the new recovery but message says system recovery cannot be created only once.

  I can create the new collection to reflect the Win7Pro?

  Thank you very much for the help.

  pit says:

  I can create the new collection to reflect the Win7Pro?

  Thank you very much for the help.

  Hello, ditch,

• Recovery disk for a T130: Re-create the recovery disk

  Hello

  I own a Toshiba T130, white model that comes with Windows 7 x 64, 4 GB of RAM and a DVD player. I recently tried to install a Linux operating system through a process that is automated via a network installation (Shoemaker), which has actually wiped clean the hard drive before installing the system, contrary to my intention at first actually install it on a separate partition, along side windows!

  It happens that (day 1, after having bought the laptop), I have already saved/stored the folder of HARD disk recovery (integer) initially placed on a second partition in Windows 7, on an external USB hard drive, but did not have a DVD or USB recovery media as it is recommended. The content of the file is as follows:

  + HDDRecovery
  + ODDFiles
  | + Start
  | + EFI
  | + HDDPREP
  | + HTMPREP
  | + Sources
  | + Tools
  + OriSetenv
  + Swing
  | 10347XSP.swm
  | 10347XSP2.swm
  | 10347XSP3.swm
  | 1034...
  | 10347XSP8.swm

  I think that these files are what is needed to create a recovery media and I have a need to restore my computer to its original state and recreate my Windows 7 environment. After all, it is here where I get my work.

  So, you guys don't know if I can build a support of restoring these files? If so, what is the procedure?

  Thank you very much
  Waiting for your response.

  -Ilyes Gouta

  As far as I know is now too late for the creation of recovery disks. If I remember well in s manuals is clearly described that you can install OS using only two procedures: using installation of recovery of HARD drive or using created the recovery DVDs (connected external USB optical disc drive).

  I'm 99.9% sure that the installation of the external HARD disk is not possible.

• Failed to create the restore point

  Hello

  I think I can off the coast caused a problem if I ever recover my laptop which is a Pro L450D phone by changing the settings in the system protection box in windows 7.

  I was looking to create a restore point before I upgraded to Windows 7 with service pack 1 and in the creation and restore area I noticed that 3 disks were available to have system protection turned on but only 1 was actually activated system protection? OS Install (C) had no active protection system and I think the recovery partition, WinRE (D) allowing for the protection system was the system disk, I'm not sure at 100%, but of course the 3rd entrance was my DVD player, in any case what I did I clicked to turn on protection for the disk OS Install (C) and an error pops up saying that it was not possible I clicked on ok and when this error went off the screen I noticed that the drive is now enabled for the protection of the system, but he was now also the system disk? and the 3rd disk seemed to disappeared from the region where the available drives appear? I'm a t a loss as to what happened but I think the worst cases, it's that if I ever want to recover my system through the recovery options, I'm not able to by changing the settings of the system, any help on this will be appreciated, I created the recovery disc when I first bought the laptop before I did anything else still with a bit of luck , I hope that this will be my go out the wrong card if I need to use or restore the system in this way.

  Thanks in advance for any help.

  Hi stevieboyfitzy,

  Do you want to create a restore with the built-in Windows software point or what software you used?

  Well, if you are installing Service Pack 1 I put t he of needed to create an additional restore point. I installed Windows 7 Service Pack 1 on both my notebooks and installation was operating normally, no problem.
  In addition, I would like to make a backup of all important files on an external drive such as USB HDD.

  If you have already created the Toshiba Recovery disk that you are on the safe side. In the case where I would go something wrong, you are always able to restore the original settings. ;)

• Satellite R630-13D: failed to create the recovery disk

  I have a similar problem. I have a Satellite R630-13 t and tries to use the Toshiba recovery Media creator to create restoration 2 DVD discs.

  When you try to create the first disc, I get the following message:

  Cannot read the next file.
  E:\Boot\fonts\chs_boot.ttf
  (Error code: 020150-20-00000000).

  I get a similar message when you try to create the second. I tried four times. On my last attempt, I disabled the protection in real time on my virus checker (Windows Security Essentials) - I don't know how to close down completely, not sure you can. I also turned off wireless and bluetooth.

  I need to create these discs please. I use anti-scratch Philips DVD + RW 4.7 GB 120 Min 1-4 x speed discs.

  I know that someone else mentioned to try a different type of disc but I just bought these for this purpose and don't really want to buy more if I can help it. The disc type is certainly not a problem? When I look at the disc in the drive, they have files on them - even the file that the error message above says that he could not read.

  Thank you
  Ian

  I had similar experiences in the past and I can say that, after several tests using different types of media, I was able to create recovery discs using DVD-R only media.

  Hey two disks empty buddy aren't really expensive so don't waste your time here awaiting a solution and buy two or three empty DVD-R discs and create recovery media.
  Another tip: do not buy some cheap stuf but high quality TDK or Verbatim discs.