Creating a Partition on a new R200?

Similar Questions

• I want to install windows on my new macbook and I need to create a partition. I have not now what size to make my windows partition. Can someone give me some advice?

  I want to install windows on my new macbook and I need to create a partition. I have not now what size to make my windows partition. Can someone give me some advice?

  1. in what year is your Mac?

  2. What is the size of your storage internal?

  3. what version of Windows?

  4 as a general rule 60-100 GB for W8 + / W10 is recommended. You can also create a minimum Windows (30-50 GB) and use an external drive D: for documents applications for portability.

• I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

  * Original title: installation of windows 7

  I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

  Try to reinstall.

• My new computer came with a partitioned hard drive. I have not create the partition. What is it?

  original title: Partition of mystery

  I just got a new computer. It has a 2 TB hard drive that apparently has already been partitioned, creating a drive E. I have not create the partition. The files on the partition are old EULA, the .cabs, and .dll files, but this that baffles me, is that the two disks are the same size, 2 TB. It is the size of the disk itself. Whence comes this extra drive, and how these two readers may overlap?

  Should I remove this extra drive and if so, how can I do?

  Thank you

  Tim

  Wait, I'm CONFUSED! YOU can not HAVE a PC THAT IS 4TB SIZE!

  
  
  EDIT: Sorry, but Acer installed 2 HDD. (Wow!)
  
  
  Be sure not to remove the 2nd partition, because it IS a recovery or backup disk.
  
  

• Satellite P100-429, stopped after you create the partition on the HARD disk

  After you create the partition on the HARD disk. PC just stopped.
  After using the restore CD, nothing happened again, any ideas?

  Hello

  Express media player has been installed on the partition of the laptop?
  I can give you a good solution for 100%, but there may be a conflict between the express media player partition and the new partition.
  Have you installed the OS on the new partition?

  Hey Buddy, try to delete the entire partitions in the HARD drive and format the HARD drive completely. Then try to use it again the Toshiba Recovery CD and install Toshiba image on the HARD drive.

• Cannot use disk utility to create the partition of the free space on the external USB drive.

  I have a red 3 TB Western Digital drive in a USB hard drive docking station.

  The reader is GPT, and I have two volumes on it (a single volume is "Microsoft reserved", another volume is NTFS).

  The other part of my drive is 1.5 TB of free space. I want to create a new partition with free space so that I can put backups Time Machine encrypted external hard disk.

  I checked free space on the drive with my Windows machine:

  
  DISKPART> list disk
  
  Disk ### Status Size Free Dyn Gpt
  
  -------- ------------- ------- ------- --- --- 
  
  Disk 0 Online 167 GB 20 GB
  
  Disk 1 Online 465 GB 0 B *
  
  Disk 2 Online 2794 GB 1526 GB *
  
  DISKPART> select disk 2
  
  Disk 2 is now the selected disk.
  
  DISKPART> list part
  
  Partition ### Type Size Offset
  
  ------------- ---------------- ------- -------
  
  Partition 1 Reserved 128 MB 17 KB
  
  Partition 2 Primary 1267 GB 129 MB 
  
  DISKPART>
  

  DiskPart displays 2 partitions - a 128 MB and the other GB 1267 with 1526 MB of free space.

  I took the hard drive of my MacBook Pro running OS X El Capitan 10.11.3 and pulled towards the high disk utility, but for some reason, that it does not resemble the disk utility it is to see the free space, so I can't create a new volume.

  Here are a few screenshots:

  ... of the physical disk in disk utility (notice how it doesn't seem be all unallocated space on the disk to create a new volume):

  

  ... of the NTFS volume in disk utility:

  

  ... of information for the drive in disk utility:

  

  ... of information for the NTFS volume in disk utility:

  

  ... of the partitioning settings page. Notice how the sign is grayed out (I can't create another partition):

  

  

  I'm a new Mac user. My company recently gave me a Mac, so the first thing I want to do is to create a new partition on this external USB drive to put backups Time Machine figures on it.

  In the research I did find a way to do it on a mac computer without erasing the drive and starting over. But you can go to your windows computer and partition the free space of disks. Then use the mac to set the free space as mac os extended journaled. Here's what I found. http://www.PCWorld.com/article/2066191/how-to-partition-a-hard-drive.html the only other way would be to copy the file on the external drive, somewhere, so you can delete it and re partition for windows and mac. Then reinstall windows files. I'm not familiar with windows systems.

• Re: Satellite L40 PSL48E: can I create a partition Vista installation disc

  Hello

  My Satellite L40 PSL48E came with a Vista recovery partition.
  As I despise Vista I bought a replacement drive and installed a new hard drive and installed XP pro.
  I retained the original drive in case I've never had a claim under warranty.

  Now, I find that, because of work, commitments, I occsionally use the despised Vista trash and wonder if it is possible to create a partition on the original disc installation disc so tha ti can create a system dual boot on my new drive.

  I am very reluctant to BUY a new Vista CD, since I already have a perfectly legal copy on a disk, which I am not using and I'll use it only rarely for this commitment to work.

  Any information received with gratitude

  Thank you Ron

  Hmm. If you have a HARD drive recovery option, then a complete image has been placed on the HARD drive and generally all cell phones with HARD drive recovery option is supported by a tool called TOSHIBA Recovery Disc Creator Toshiba.

  With this tool, you can create a Vista recovery DVD If the OS Vista, have been damaged, you can also try to start the computer by pressing the F8 key.
  This would allow an advanced boot menu.
  Here you must choose repair computer

  But note; This option is available only on laptops with HDD Recovery

  See you soon

• Pavilion 500-307nd: create additional partitions without endangering the recovery option

  I just bought a new HP pavilion 500-307nd, it has a 2 TB hard drive. Currently, it contains the recovery partition (10 GB), the rest is used as one and only one primary partition. I would like to divide this (close to 2 TB) a partition into three partitions: a primer containing the system and software, two for the storage of data only. The recovery partition will remain intact. That would be a problem? I'll always be able to use the if necessary recovery partition?

  Bart, welcome to the forum.

  Here's a guide that should help you.  Before you begin you must make a backup of all your personal data.  If you have not done so, you should do the System Recovery discs for the computer, too.  This will allow you to recover the computer if you have problems creating the partitions.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Is anyway to create fifth partition and keep the basic hard disk?

  Hi, my laptop is g7 1207se Pavilion and the and HP has made 4 partitions (C for windows) and the other 3 for system files and recovery, I want to create a new partition for my files (so I can recover my system without losing them) or install other operating systems, but apparently if I want to create fifth partition I have to convert my hard drive in Dynamics by the practice that I won't be able to boot from any partition but the C, which means no recovery and no other operating system.

  Is anyway to create fifth partition and keep the basic hard disk?

  Hello

  See the excellent guide of Daniel_Potyrala on the link in this regard.

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-pre-loaded-Windows-7/TD-p/742019

  Kind regards

  DP - K

• How to create a partition bootable on USB

  Can someone tell me how to create a partition on my USB key bootable?

  The Microsoft page for this was complicated and not very clear :-)

  I hope that flashing the new update of the BIOS on my USB solves the recent problems of Vista...

  Hello

  How to create a Vista Installation USB key - read the warnings
  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  HOWTO: Install Windows Vista from a high speed USB 2.0 Flash Drive
  http://kurtsh.spaces.live.com/blog/CNS! DA410C7F7E038D! 1665.entry

  Install Windows Vista from USB Bootable Flash drive
  http://www.techmixer.com/install-Windows-Vista-from-bootable-USB-Flash-memory-drive/

  How to create bootable USB drive to install Windows Vista?
  http://www.askvg.com/how-to-create-bootable-USB-drive-to-install-Windows-Vista/

  You can install Windows from one will also let you Flash a BIOS.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Create no partition Table partitioning

  Dear all,

  I have a table that is not partition, and it has about 20 G data... If I want that table with say DATE_M partition column

  Please can anyone suggest the best way to do it.

  Thank you

  To create a partitioned table

  (1) you must make a backup of the existing one you can take expdp or DEC

  (2) remove the table and create the same table now with partitions (a minimum score is required)

  you want a range of ex-based partition if you use a date column

  (3) loading data from the previous table into the new partitioned table, either by DEC or impdp, the inserts will be automatically in their respective partitions and you don't mention explicitly.

  Their is no other possible way to partition a non partitioned table, you can do than workarounds to minimize the downtime of the table trying different ways to load data into the partitioned table.

  You can use the enable row movement clause of create table and also use local indexes for easy maintenance partition.

• Need to create the Partition in the history table

  Hello

  I have an audit table that stores the data for the last 8 years in it and the customer wants to retain the data for the last 8 years. Now as adding data to this table is increasing, there is a delay in execution of report which are acquired by querying on this table.

  Basically, they go a from date and to date. Then these date are compared with two columns of dates in the table. The condition of the query will be as below

  TRUNC (NVL (DATE1, DATE2)) > = TRUNC (TO_DATE (?, ' dd/mm/yyyy ""))

  AND TRUNC (NVL (DATE1, DATE2)) < = TRUNC (TO_DATE (?, ' dd/mm/yyyy ""))

  Users can query for any date range.

  I am thinking of creating a Partition of the range on this table for each month during the 8 years of data. Please suggest on the question of whether I should use partition interval range to make it more effective. And would also create an Index on this partition for the above two day columns.

  12 (months) SO * 8 (years) = 98 would be created partitions. This will not overload the schema of database/Tablespace? Y at - it another effective way to set the table.

  Please suggest and let me know for any clarification.

  There are 2 approaches (but not limited to 2) to create the Partition on an existing table:

  Note: There is no ALTER TABLE statement to convert a heap table to a partitioned table.

  1. create a temporary Partitioned table with the same types of data in the column. Take a dump of the original table (HEAP) export and import the dump into the newly created partitioned intermediate table. After checking the data file the original and rename the interim even as the original table.

  2 using the package Oracle DBMS_REDEFINITION automates the steps above from said (not exactly the same steps, however) and its done online - which means there is no required downtime, the original table may undergo DML operations during this process of redefinition. View partitioning of a table online with DBMS_REDEFINITION | Oracle instructor

  According to my understanding if let us know as a partition interval then in April if there is an inserted record then it will create a new partition for the month of April will be of value less than 30 April 2014 "and all other documents created in April will pass under it"

  Yes, it's a feature of 11g, which Oracle manages adding partitions as needed. In earlier versions DBA can add partitions manually from time to time. Reference www.gavinsoorma.com/2009/09/11g-interval-partitioning/

  Here the reason for check the sent_out_datetime NVL will be NULL for few records, so in this case we want to get the records for dates of mapping them to received_datetime

  In addition, try to replace the NVL with COALESCE and test it. This would help improve performance.

• Create index partition in the partition table tablespace

  Hello
  
  I am running a work custom that
  
  * Creates a tablespace by day
  * Creates the daily table partition in the created tablespace
  * Removes the days tablepartition X
  * Removes the storage space for this partition of X + 1 day.
  
  The work above works perfectly, but it has problems with the management of the index for these partitioned tables. In the old database (10g - single node), all indexes and partitions exist in a BIG tablespace and when I imported the table creation script in the new database, I changed all the partitions table & index to go in their respective space.
  
  For example:
  
  Table_name... Nom_partition... Index_Part_name... Tablespace_name
  ============...================............====================...........=================
  TABL1... TABL1_2012_07_16... TABL1_IDX_2012_07_16... TBS_2012_07_16
  TABL1... TABL1_2012_07_15... TABL1_IDX_2012_07_15... TBS_2012_07_15
  
  
  But now, when the job is run, it creates the index in the tablespace TBS_DATA default.
  
  Table_name... Nom_partition... Index_Part_name... Tablespace_name
  ============...================.............====================...........=================
  TABL1... TABL1_2012_08_16... TABL1_IDX_2012_08_16... TBS_DATA
  TABL1... TABL1_2012_08_15... TABL1_IDX_2012_08_15... TBS_DATA
  
  
  I can issue alter index rebuild to move the index to its tablespace default, but how can I make sure that the index is created in the designated tablespace?
  
  NOTE: the partition/tablespace management work that I run only creates the partition of the table and not the index.
  
  
  The new env is a cluster of CARS of 2 nodes 11 GR 2 on Linux x86_64.
  
  
  Thanks in advance,
  aBBy.

  try something like this

  ALTER table tab_owner.tab_name add the partition v_new_part_nm
  values less (to_date('''|| v_new_part_dt_formatted ||'') ((', "DD-MON-YYYY)) tablespace ' | part_tbs
  update the index (ind1_name (partition ind_partition_name tablespace ind_part_tbs)
  ind2_name (partition tablespace ind_part_tbs ind_partition_name))
  ;

• Create a partitioned table

  Hi all
  I want to create a table that may exist for the next 100 years (pessimistic how I am), or maybe for the next 1000 years (now, I expanded my mind) in Oracle 9i (... oh I can't help it). I want to create a partitioned table that will store the data into partitions on annual basis and scores on monthly basis, I create a table with partitions? If Yes, then how?
  
  * 009 *.

  Yes, 9i, you create explicitly in each partition. You would normally create not all partitions in future when the table was created in the first place - you would normally a process that regularly added additional partitions.

  11.1 and later versions, you can use range partitioning to have Oracle automatically creates new partitions that they became necessary.

  Justin

• How to create/add sites to the "new tab" page?

  I followed the link to help you guys already created. He asks to go to the window "Show all bookmarks" and drag a bookmark already created a vacancy in the "new tab" page. This does not work for my PC as once I drag the desired bookmark, just open this page on the new tab page. Please help with adding new tiles to the new blank tab page.

  I thought about it.

  I can't find anywhere in the manual where it says that Firefox must be set on remember the story so that it works. But he does.

  I put the tools-> Options-> life private Firefox Will: do not forget history

  and it works very well.

  I can understand why remember the story must be about to have FF build this list automatically. But why must it be to build this list manually?

  Well.

  I recommend FF to update their documentation.