Creating dependent list on the security group.

Similar Questions

• UCM, how to put in place the security group according to PS file conversion?

  Hello, everyone.
  My PS need files converted to PDF Format, some do not. So, I created the Group 1 and group 2 in the security group. Installed Gs8.54 PDFc elements and.
  
  The current result (situation) is all the files in the format PS are converted to PDF, but I would like that the ps in Group 1 format files can be converted by selecting the Distiller, the ps, in Group 2 format files can not be converted by selecting PassThru.
  
  Who can tell me how to create server content filters and configure the conversion based on security groups?
  
  Thank you very much!
  
  Moreover, my native language is not English. So please use simple English as possible, you can. Thank you!

  Hello

  The best way to get this done requirement is to use the component SelectivelyRefineandIndex. With this component, you can create the conditions and put it in the resource file for the component such that we can have only materials that are archived to Sec Grp 1 sent to the refinery and those not belonging is not it will not be sent.
  How can also create conditions for FullText index summary or not depends on not all the conditions that we put in the resource file for this component.

  I think you should be able to get enough with this component requirement.

  Run the most details:

  http://www.Oracle.com/technology/products/content-management/UCM/samples/selectivelyrefineandindex-20080515-5.zip

  Just go in the Readme with the component and you will be able to go with this component.

  Hope this helps

  Thank you
  Srinath

• How to create a list for the tabs 2nd level

  Dear Experts
  
  I created a view

  CREATE OR REPLACE FORCE VIEW  "MY_VW_TABS" ("APPID", "PTTARGET", "PTTABNAME", "PTTABLABEL", "TABNAME", "TABLABEL", "TABPAGE") AS
    select pt.APPLICATION_ID APPID,pt.TAB_TARGET PTTARGET,pt.TAB_NAME PTTABNAME,pt.TAB_LABEL PTTABLABEL,t.TAB_NAME TABNAME,t.TAB_LABEL TABLABEL,t.TAB_PAGE TABPAGE
  from APEX_APPLICATION_PARENT_TABS pt,APEX_APPLICATION_TABS t
  where t.tab_set = pt.TAB_NAME
  and pt.APPLICATION_ID=t.APPLICATION_ID
  order by pt.TAB_NAME,t.TAB_NAME

  I need to create a dynamic list based on this view of the * 2nd level tabs * (of my model of two-level tabs page), to be used in a region bordered on page 0. However, I found that the code in the list should be as follows:

  select level, labelValue label, 
         [targetValue]            target, 
         [is_current]             is_current_list_entry,
         [imageValue]             image, 
         [imageAttributeValue]    image_attribute,
         [imageAltValue]          image_alt_attribute,
         [attribute1]             attribute1,
         [attribute2]             attribute2,
         [attribute3]             attribute3,
         [attribute4]             attribute4,
         [attribute5]             attribute5,
         [attribute6]             attribute6,
         [attribute7]             attribute7,
         [attribute8]             attribute8,
         [attribute9]             attribute9,
         [attribute10]            attribute10
  from ...
  where ...
  order by ...

  Now, I have two questions:
  (1) how to use the view above to be used in the code of dynamic list?
  (2) is a good way to create a list for the tabs 2nd level?
  
  Best regards
  Mahmoud

  Mahmoud

  Are you sure that you view is correct?

  >

   where t.tab_set = pt.TAB_NAME
   
  

  Should be

  where t.tab_set = pt.current_for_tabset
  

  Nicolette

• Create a list in the blackberry project

  Hey,.

  I want to create a list and fill in the list and then display it on the screen of the blackberry Simulator

  Then you should use Java.

  Try asking your question at http://supportforums.blackberry.com/t5/Java-Development/bd-p/java_dev

• Cisco Unity Connection (CUC) - import LDAP user based on the security group and then assign a model

  Need to CUC automatically import users and assign a certain user or role model if they are added to a specific security group. (These are the help desk users).  Username admin accounts they will use to sign in CUC differs from that there windows account that is linked to their profile of voicemail.

  Current - now we must import new recruits and assign the correct model

  Want - when a user is added to a security group in AD, so when CUC doing his nightly sync, it automatically import user and assign a preconfigured for the account and all user model is automatic and I have never import it back these users.

  At the present time the course help desk users are already imported via LDAP and have the role that was.

  Suggestions?

  Not something that the UCA can do out of the box.

  The UCC does not offer, is to do the LDAP synchronization and once they are in CUC, to import, choose the model.

• How to create a list of the order of the day?

  Hello

  I'm trying to create a simple list of the order of the day in Adobe Muse with about 4 rows that includes the date, time and description for each line.

  How can I create a list like this? It would be great if my client to add a new course (with date and discription) in chronological order.

  Registration for the course and nothing is not required.

  Is is possible to build a list like this in the Muse?

  Thanks in advance.

  

  You can not dynamic stuff in Muse with the exception of third-party widgets. Everything else requires a dynamic interface, so no, you want to do is not possible. You can of course keep a list manually, built from whatever elements you deem appropriate.

  Mylenium

• No default value for the security group

  Hi all
  
  I want to Group (SG) of security did not have a default value, so that users must select SG every time they check in new doc. At present, the default value for the SG is the 1st value, which can make the user forgot to change the SG and ultimately, check in with SG bad doc.
  
  Someone knows how to do this? Thanks in advance.
  
  d.s.

  Hello

  You can set ForceSecurityGroupChoice = true in config.cfg and restarts the CS to force users to choose security whenever they go to the archiving of documents.

  Thank you
  Srinath

• I lost my passwords list in the security settings when I upgraded to Firefox 13. Why?

  I use the portable version of Firefox. I was using Firefox 12. When I've upgraded to 13 all of a sudden all of my passwords and user names stored in the tab 'security' in the Panel options disappeared. I can restore or do I go through the task of your time to restore manually. I'm VERY upset. It is an upgrade?

  Websites screen names and passwords reappeared in the section passwords to remember in 'Security' after you restart Firefox for the second time after the upgrade and my discovery of missing passwords. Weird! Weird! Weird...

• Security group create a problem at the EBS UM provisioning

  Hi Expert,
  
  
  Currently, there are four security groups in my search for Lookup.EBS.SecurityGroup. Who I had reconciled EBS system.
  If I add a liability without security group or with the safety of the 'STANDARD' group, it's okay. But I'm unable to add accountability as well as of other than STANDARD security group.
  Is this problem of the IOM or EBS application problem? How can I solve it?
  
  Kind regards
  louisette

  Yes this is EBS application deliver nothing to do with the IOM.

  When we install application EBS, STANDARD security group get configured automatically.

  When we create custom security group, we need to run 2 programs in system EBS which is responsible to set up the security groups with the set of APPLICATIONS.

  I don't remember the name of the task of these programs in EBS. But, ask your administrator to do so. If you have admin EBS.

  Let me know the results.

  Kind regards
  Nayan

• Add vNIC PortGroup scope with the REST API security group

  I created a security group within the reach of a PortGroup via the REST API. Now, I'm trying to add a vNIC, also via the REST API.

  To help illustrate, I have a JMTest1 VM with 1 vNIC connected to the PortGroup which is the scope of the security group. When I change this group the first item in the list that could be added to the security group is the first (and only) JMTest1 vNIC.

  

  To add it via the REST API, I need to provide the following:

  https://192.168.x.x/API/2.0/services/SecurityGroup/SecurityGroup-XX/members/ < member-moref >

  for example I need to understand what the < member-moref > for the vNIC to JMTest1 and this is what I have a problem with.

  If I add the vNIC through the user interface and then interrogate the security group it gives me below the answer:

  < securitygroup >

  < objectIdobjectId > securitygroup-xx < / objectId >

  < type >

  < typeName > SecurityGroup < / typeName >

  < / type >

  < name > JMTest7 < / name >

  < description / >

  < revision > 9 < / revision >

  < objectTypeName > SecurityGroup < / objectTypeName >

  < scope >

  < id > dvportgroup-xxxxx / < ID >

  < objectTypeName > DistributedVirtualPortgroup < / objectTypeName >

  < name > dv-xxxxx < / name >

  < / scope >

  < extendedAttributes / >

  < inheritanceAllowed > false < / inheritanceAllowed >

  < member >

  500758f6-b97b - 7A 79 - 0c < objectId > 04 - 996f53edf3f0.000 < / objectId >

  < type >

  Vnic < typeName > < / typeName >

  < / type >

  < name > JMTest1 - NIC 1 < / name >

  < revision > 6 < / revision >

  < objectTypeName > Vnic < / objectTypeName >

  < scope >

  < id > vm-xxxxx / < ID >

  < objectTypeName > VirtualMachine < / objectTypeName >

  < name > JMTest1 < / name >

  < / scope >

  < extendedAttributes / >

  < / member >

  < / securitygroup >

  It seems that the < member-moref > for the JMTest1 vNIC is < objectId > 500758f6-b97b - a 7, 79 - 0c 04 - 996f53edf3f0.000 < / objectId >

  If I run now:

  https://192.168.x.x/API/2.0/services/SecurityGroup/SecurityGroup-XX/members/500758f6-b97b-7a79-0c04-996f53edf3f0.000

  then the vNIC is successfully added to the security group. (yay!) So I am now left with the task of how to get

  500758f6-b97b - 7A 79 - 0c < objectId > 04 - 996f53edf3f0.000 < / objectId >

  of a vNIC?

  I have looked at the object in the Mob vCenter and via PowerCLI, but cannot see how to derive from it.

  Anyone know the answer to that?

  The uuid vnic is created by concatenating the vm instanceUuid + '. ' + the last three digits of the vnic device key.  (The vnic is located in the area of the config.hardware.device of the virtual machine and the key will be to shape 4xxx, where xxx represents the 3 numbers you need).

• How to add the AD security group in each virtual machine with a name corresponding in VCenter?

  Hi all

  I would like to know if it is possible with VMware PowerCLI v4.1, I created the universal security group called 'Local administrators on %ComputerName%' for each server I have in UO computers by location OR separate and that he manually add members of the Local, but I want to attribute this security group in each computer virtual with the same name if possible.

  Basically, it's something like this:

  In the ad, here are computer objects:
  DOMAIN.com/Computers/ mailserver1-VM
  DOMAIN.com/Computers/ DBServer1-VM
  DOMAIN.com/Computers/ ApplicationServer1-VM

  In the ad's local security group objects:
  DOMAIN.com/SecureProductionOU/ 'Administrator locally on mailserver1-VM'
  DOMAIN.com/SecureProductionOU/ 'Local on DBServer1-VM administrator.
  DOMAIN.com/SecureProductionOU/ 'Local on ApplicationServer1-VM administrator.

  So I want to affect these security group in each respective name of VMS in VCenter:

  VCenter01.domain.com
  Datacenter1
  HighPerformanceCluster1
  Mailserver1-VM - Local Administrator on mailserver1-VM - role: read-only
  DBServer1-VM - Local Administrator on DBServer1-VM - role: read-only
  ApplicationServer1-VM - Local Administrator on ApplicationServer1-VM - role: read-only

  Any kind of aid and assistance would be appreciated grgeatly.

  Thank you.

  Hi Albert,

  I don't know what you want to check exactly, so I give 2 possible solutions.

  (1) you have a fixed number of names known to virtual machines for which you want to add this permission.

  $targetVM = "MailServer1-VM","DBServer1-VM","ApplicationServer1-VM"
  
  Get-Cluster -Name HighPerformanceCluster1 | Get-VM | `    where {$targetVM -contains $_.Name} | %{    New-VIPermission -Entity $_ -Principal ("DOMAIN\Local Administrator on " + $_.Name) `       -Role (Get-VIRole -Name ReadOnly) -Confirm:$false   }
  

  (2) you want to check for each virtual computer if the security group exist and then add the authorization.

  Get-Cluster -Name HighPerformanceCluster1 | Get-VM | `    Where{Get-QADObject ("DOMAIN\Local Administrator on " + $_.Name) `        -DontUseDefaultIncludedProperties -WarningAction SilentlyContinue `        -ErrorAction SilentlyContinue -SizeLimit 1} | %{    New-VIPermission -Entity $_ -Principal ("DOMAIN\Local Administrator on " + $_.Name) `        -Role (Get-VIRole -Name ReadOnly) -Confirm:$false} 
  

  Note that this requires the Quest AD snap-in must be installed. If you have a version without the Quest AD snap let me know.

• Access control and security group

  Hi all

  I need to know about the access control and what data are suitable for the security group and roles if I have the script like this:

  i. There are 2 different app namely ARA (96 branches with different types of reports) and TRACS400 (6 branches with different types of reports)

  II al ' ARA, users of Branch01 can NOT check Branch02.

  III. different report type is measured by Branch01 and Branch02 are different.

  IV. in Branch01, there are some reports are Read (Cannot download) only and some reports are read and write (downloadable).

  My questions are:

  1. from the above scenario, do I need create all the 96 security group and assign it to different leadership roles?

  2. How can I control read and write access, as I have tested the READ access the user is still able to download the report.

  3. How can I control to branch 01, report Type A is a read and report Type B read and write access?

  4. I noticed that if I use the account, the security group can be used be limited to 50 only security groups. Is this good? I may be an application later in the future. These 2 request for test only. But if I do not use the account, there are any number of security groups that can be used?

  Appreciate for your help.

  Hi aziela

  As mentioned by the friends of the forum, it is advisable to have the minimum security group given that its impact on the scalability of the application (rule). Accounts provide the best security solution of dimension view group.

  Security group corresponds to the role, role is mapped to the users. The permissions are obtained at the level of role-SG.

  Accounts are mapped directly to users. So you can have a precise control at the level of the user (eliminating the abstraction of the role).

  All these aspects are impacting performance where rule of thumb is mentioned in the documentation. In general, if a user belongs to many groups and accounts then it will take more time to process the request of content for this user.

  w.r.t. prohibiting the read-only users so that they will not be able to download content, there is a setting, please try option mentioned in this link http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/e01_interface001.htm#CACCFHHA

  WRT performance calculation, see http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/c03_security003.htm#CSMSP143

  Hope this helps

• How to print a list of the movies that I have on an external hard drive

  I have my iTunes on an external hard drive.  I would like to print a list of the movies.  I tried 'print' which causes quicktime and iTunes to open. I tried "select all", "copy", then paste in the text change which causes a spinning endless ball and the eventual system crash.  I guess she's trying to print the actual movies rather than on the list.  Any ideas how to create a list of the contents of a disc and then print this list?  I use OS X on a macbook pro 10.11.5.

  You a run this in Terminal and it will display the names of files in a file on your desktop.

  LS path/to/file > > ~/Desktop/Movies.txt

  Replace the full path to the folder path/to/folder.

• How to work on the strategy of Distribution of the storage group?

  Any body can help me to understand the strategy of Distribution of the storage group?

  The App, the storage Volumes have the option below:

  Spread: Distribute files in all storage locations.
  When a file is created, the storage with the most available space is selected.

  Round-robin: Distribute files sequentially using the storage locations.
  When a file is created, with the oldest time used storage is selected.

  I don't know what is different from this two option. When I select this option, I can see on my environment? Thank you.

  I think that it is used only for writable volumes right?

  If you are using storage with appstacks groups all appstacks are synchronized between the two storage when you use the sync option.

  When you create writeable volumes in the storage group it will create in one of the stores of data defined in the storage group.

  Let's say your staorage is called ST1, ST2, ST3 and ST4 and ST1 and 2 are 100GB and 3 and 4 are 1000GO then that's what happens.

  East Round Robin

  ST1, ST2, ST3, ST4, ST1, ST2, ST3, ST4 and so on and so forth. It would take into space wanted account.

  With the other he will do

  ST3, ST4, ST3, ST4, until both have also 100 GB of disk space and it will then be evenly.

• Create a list based on checkbox selections

  Hi, I'm new to LiveCycle. I would like to create a list at the end of a document which shows all checkbox selections throughout the document. Is this possible?

  I am using Livecycle Designer ES3.

  Thank you

  Create two ListBox objects at the end of your form; ListBox1 will display all of the checkboxes are checked and ListBox2 for all those who are not.

  The following code can be placed in the click event of a button or any other event you want:

  
  var vList = getCheck(form1,{});
  
  ListBox1.clearItems();//Name of the list box that lists the checked fields
  ListBox2.clearItems();//Name of the list box that lists the unchecked fields
  for (var i in vList){
       if (vList[i].value=='0') //<----Value to change based on On/Off value assignments
            ListBox2.addItem(vList[i].caption,i);
       else
            ListBox1.addItem(vList[i].caption,i);
  }
  
  function getCheck(vNode,vChecks){
       if (vNode.className=="field" && vNode.resolveNode("ui.checkButton")!=null){
            vChecks[vNode.somExpression]={};
            vChecks[vNode.somExpression].caption=vNode.caption.value.text.value;
            vChecks[vNode.somExpression].value=vNode.rawValue;
       }
       if (vNode.className=="subform"){
            for (var a=0;a
  This code assumes that your root subform is form1 (the default value in the Designer). It also assumes that all names and captions for your boxes are unique.
  Now for an additional function, you can place the following code in the event of change of your ListBox:
  xfa.host.setFocus(this.boundItem(xfa.event.newText));
  
  Displayed in list boxes are all legends of the boxes in your form. Click on one of the items in the list box and it will bring you to this box.
  Hope this is what you are looking for.
  Kyle