Cannot virtualize my physical machine with Vista 64-bit

Similar Questions

• Virtualize a physical machine with SAN-attached storage

  Hello

  We are looking to virtualize a physical machine in W2k3 with SAN attached storage.  Ideally we would like storage as RDM due to migration, is possible without destroying all the data that is held on this subject?

  TIA

  David

  Just use converter for local disks.

  Then map your SAN disk to your ESX (masking of storage).

  Rescan ESX to see the new LUN (under the storage card).

  Finally add the virtual machine to the RDM disk (use virtual mode to use instant VMware).

  André

• Cannot start the physical machine converted to a virtual machine under ESXi 4.0

  Hi all

  I have 2 has with the material below

  Dell optiplex 755 2.4 Qcore 4 GB of RAM and 160 GB of HARD drive

  A performer with ESXi 4.0 other runs with Windows 2003.

  I tried to convert physical machine with "Vmware Vcenter converter Stand alone" 4.0.1 build 161434

  I used the tool on the source machine and by another machine on the network.

  The two process converts the physical machine to a virtual machine successfully without any errors.

  After conversion, the virtual machine cannot start, and shows only a small slider that is not flashing too.

  

  The physical machine have a single partition of 160 GB

  The space currently used on the physical machine is 26 GB.

  I reduced the size of the HARD drive to virtual computer with fix / light available in 40 GB.

  point to make here is that the ESX have only 160 GB HDD, so he will not be able to copy all 160 GB because of which I am reducing the 40 GB HARD drive

  I converted a few other physical machines with 40 GB HARD drive and they work well after the conversion.

  Any sugessions would be greatly appreciated.

  Thanks in advance

  Hi Sunil,

  Let me know the drive selected in the custom option controller.

  Thank you

  Krishna

• Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB _ @_. _, Thank you

  Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you

  How does this relate to the features of Windows Update?

• ZIRE 21 hot sync is not compatible with vista 64-bit program

  ZIRE 21 hot sync is not compatible with vista 64-bit program - apparently it will work with 32-bit vista.  Is there a way to create a 32-bit only for the Zire 21 program without compromising the rest of my 64 bit OS computer? That's what Microsoft sent me. The help for this program was created in Windows format help, which was used in previous versions of Windows and it is not supported in Windows Vista.

  For more information, see Windows Help program (WinHlp32.exe) is no longer included with Windows on the Microsoft Web site.

  Laughing out loud

  You cannot change part of a 64 bit of Vista in 32-bit OS.

  32 bit and 64 bit OSs are completely different operating systems.

  See you soon.

  Mick Murphy - Microsoft partner

• Update BIOS on Satellite A300 with Vista 64-bit

  How can I update the Bios on a Satellite A300 with Vista 64 bit.

  There is only one available 32-bit update utility.

  So don t update the BIOS if the compatible version is not available.
  BIOS for Vista 32-bit is not compatible with Vista 64-bit!

  See you soon

• With Vista 64 Bit, my magnifying glass doesnot work on many wwbsites WHY?

  On a HP Pavilion Special Edition with Vista 64 Bit, my magnifying glass does not work on many wwbsites WHY is - this?

  Hello

  1. were you able to use the magnifying glass in these Web sites?

  2. you remember to make changes to the computer before this problem?

  You can try to create a new user account and check if the problem occurs:

  Create a user account

  Hope this information is useful.

• Could not get palm pilot tx to work with vista 64-bit

  I bought a Dell Studio Hybrid under Vista 64 - bit OS with 4 GB of RAM. .  However, according to the website Compatinbility Web of Microsoft Vista, Vista 64-bit is not compatible with the Palm TX, just Vista running 3 GB of RAM or less.  Anyone can tell me how to get my Palm TX for work (sync) with the Vista 64-bit operating system?

  I uninstalled the Palm, Inc., CD-ROM software and reinstalled only to get the same results: the Vista 64-bit operating system is not compatible with my handheld Palm, Inc.  Please note that even the Palm TX is compatible with all other operating systems Vista except for the 4 GB of RAM, 64-bit Vista oS Microsoft Compatibility Web site said.  Help.  I'd like to be able to sync my pocket computer with the data that I have previously placed on Microsoft Office Access 2007.  Now, when I try to sync, my office simply there and made the ocassional beeps (I guess for signals may not make the Palm TX with Vista 64-bit as function implies the Microsoft Web site.)

• Running itunes with Vista 64-bit

  I'm in the same boat using Itunes with Vista 64 bit. Dell said many things causing Vista crash. I run the gamit on Itunes last year. So I removed all the itunes, Hello, quicktime to computer. But I have 2 guys with iphones who'd really like to be able to sync it to the computer and download the images. What is Vista and Itunes tolerate each other better?

  I'm in the same boat using Itunes with Vista 64 bit. Dell said many things causing Vista crash. I run the gamit on Itunes last year. So I removed all the itunes, Hello, quicktime to computer. But I have 2 guys with iphones who'd really like to be able to sync it to the computer and download the images. What is Vista and Itunes tolerate each other better?

  You should ask questions to Apple itunes - itunes forums.

  Here's one of them...
  Apple - Support - Discussions: using itunes for Windows

  http://discussions.Apple.com/forum.jspa?forumid=800 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• BlackBerry Smartphones Im getting a new laptop... BBDM will work with Vista 64 bit

  Im getting a new laptop... BBDM will work with Vista 64 bit?

  Yes, of course, if you have problems to read this link

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB12155&sliceId=1&docTy...

• Suggestions for synchronization of the Z22 with Vista 64 bit?

  Hello world

  I know there are many positions related to this, but I'm still not clear on what I need to do, so I hope someone can help!

  I just bought a new laptop with Vista 64 bit, and I have a Palm Z22.  I know there is currently no drivers for Vista 64-bit, and my laptop does not seem have an infrared port, so here's my question: anyone had success synchronization a Z22 in any other way, and if so, how?  Any help would be appreciated!

  I am posting this probably a bit late, but for the benefit of anyone else who runs into this problem, I have had success using the IRDA to USB for Hotsync adapter a Z22 with a laptop under Vista 64.

  I use an old version of Palm Desktop and Hotsync software in 32-bit compatibility mode.  When I tried to do a Hotsync via the USB port, I discovered that there is no USB driver for 64-bit for the Palm handhelds.  Not at the time I write this, in any case (Nov. 2008).

  The only other option is IR for the Z22.  I found an adapter USB to IRDA model USB-1510 online.  The adapter comes with an extension cable USB for those who have a desktop PC or a USB located inconveniently on a laptop.

  As soon as I plugged the adapter to the USB port on the laptop the 64-bit for the adapter driver has been downloaded from the Windows Update site.

  I created Hotsync via infrared like I would on any other PC and it worked the first time.  The only problem is that if you start Hotsync by touching the permanent icon next to the writing area, he will always try to synchronize via USB, but I guess it's a matter of Palm Z22.  I have been using the icon on the main touch screen that always starts with an IR connection after the initial installation.

  If you have a different model, Bluetooth and Wi - Fi Hotsync seem to work for others.

• Cannot print over a network with Vista home

  Hello I try to connecto my new laptop to my network wireless of office to share files and printers.  The new laptop is Vista Home 64 bit.  The printer is connectet to a PC with Windows xp and according to a person who does our netwirking the printer cannot talk to the 32-bit and 64-bit and tells me that I have to change for windows XP.  It does not sound right.  Apparently there is no driver for canon iR 1510-1670, which runs on a 64-bit processor.  Any help...

  Thank you

  Guillermo

  If there is no Vista 64-bit drivers available for this Canon printer, you will need to spend the XP Canon printer to a compatible printer Vista 64 bit if you want to print from it.

  Canon has written drivers for their products, not Microsoft.

  Check yourself on the Canon Website driver as to what drivers are available for this printer:

  http://www.USA.Canon.com/OPD/controller?Act=OPDDownloadIndexAct

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot create a virtual machine with a vmdk file copied from another location, please find the attached error

  Hi all

  I copied a file from one place vmdk and try to make a new virtual machine with this vmdk file. But when I turn on after the creation of vm error is coming. Error in the text and the image below

  Power on the virtual machine: cannot open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  See the error of the stack for more details on the cause of this problem.

  Time: 31/03/2015-14:40:05

  Target: DBServer

  vCenter Server: vcsa

  Error stack

  An error was received from the ESX host turning on DBServer VM.

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/543d140b-feb33d52-7640-90b11c9796c3/vmdk/kapuatdb.vmdk'

  Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  This error message generally if the hard files have been copied hosted as VMware Workstation product, which uses a format of sparse file that is not supported on an ESXi host. Instead of the hard copy, you can use VMware Converter, or - if you prefer - you can convert the hard using vmware-vdiskmanager (before transfer) or vmkfstools (after downloading). I deal to use vmkfstools you will need to load the mutliextent module (see for example "Clone or migration operations involving virtual discs non-VMFS on ESXi fail with an error" vSphere 5.1 Release Notes)

  André

• 4 virtual servers in a single physical Machine with a physical LAN card, how possible to assign 4 different unique to each virtual server IP address?

  Can someone tell me please, that each server Machine should have an IP address of seprtae to connect the client computers. If we have 4 Server virtual machines in VMware in a physical server with a LAN card with only a MAC address. How can assign us the same IP address to all computers in Virtual Server 4? While we need four IP addresses of different/seprate for each server computer to connect to client computers. can someone explain to me please. (will be greate if you can give me a few examples). Thanks in advance.

  You will need four different IP for each virtual machine, and each VM will have a different MAC address generated automatically by vSphere.

  Assuming you are using vSphere, I highly recommend you take a look at this document: http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf

• Centro cannot perform an initial synchronization with vista 64

  Well, I have this centro to verizon and a bluetooth adapter and the last access of Palm software. Everything is installed. Everything sees the other. But when I start the synchronization between the centro and the vista, it hangs on the Agenda second on the list of things that it syncs. It never advanced past this point and believe me, I HAV left "synchronization" for 45 minutes without change. Then I open the Task Manager and end task in frustration. BTW, the centro can synchronize with my XP and my palm TX bluetooth sync with vista. I have uninstalled and reinstalled software Acess and synchronizations of TX, but not the centro.

  What you're suggesting?

  Oh, I'm a simple girl, I need advice. Where can I find the book date leads to uncheck? I know that I found in the synchronization of verizon software and unchecked on the Agenda, addresses, media one and left only email. Which is probably stupid too since I use versamail and not their e-mail. But I'm not clear on how to proceed by unchecking the agenda and with which machine to do this and to place the dbfixt to run check the agenda. I guess it all must happen on the centro since it has alleged corruption? And a sidebar which is today, I could not cable sync on my XP work with the centro... with the same problem, I got on the vista home. So I tend to believe the Agenda corrupted on the theory of centro. Just not clear on how to proceed with the fixing. Thanks for your help.

  Message relates to: Centro (Verizon)