Creating huge garbage files.

Similar Questions

• First creates zero byte garbage files while saving, project file disappears / corrupts

  Hi guys,.

  I was faced with a strange intermittent technical problem with first saved project (and sometimes the After Effects project files).

  Case:

  -Editor opens a project.

  -After a while as major successes of the editor "Save."

  -A file named strangely appears in the save location without extension (a long string of characters separated by hyphons).

  -Sometimes, this garbage file disappears, and the project is saved. Other times, this file remains and original project file disappears and the Editor doesn't even know!

  -If the editor hits record once again, a message box appears indicating the file has been modified since the last save - hit Cancel or OK.

  This question has meant that we have lost from the project files and had to recover backup automatic and/or creative cloud sync folder.

  Sometimes, it saves ok!

  
  

  This is what the strange file looks like.

  

  I don't know if this problem is related to the software Adobe, Mac os or Linux, but we have only run into it using the Adobe software.

  Sometimes, after effects up an error related to that as well, forcing you to either "save under", or incremental save.

  

  It's a network editing environment - all customers are macs Mavericks, working from a Ubuntu Linux via SMB server through gigabit ethernet. All clients are authenticated on the server to the same user admin directory and creating masks are 0755 in SMB settings. SMB.conf also has some setting parameters: socket options = TCP_NODELAY SO_RCVBUF of IPTOS_LOWDELAY = 65536 SO_SNDBUF = 65536

  Op-locks are disabled at the side Server (I thought it might be to do with oplocks).

  Someone at - it ideas?

  Or maybe someone could explain to me the process behind the scenes of what happens when the first runs a backup?

  Glad to hear that it is not me to become crazy, but unglad you meet it!

  Recently, we have replaced SMB with NFS as the Protocol for the sharing of our main RAID and cache, and since then this problem occurs is no longer.

  This points no doubt the way Adobe apps with SMB. I have a feeling that it is something to do with oplocks or something behind the scenes that denies access PP for the project file to crush them.

  TBH, as a bonus NFS will be like a rocket to planet bliss Editor. It's a good beast. Unfortunately I do not know how the Windows implementation is good (I know certainly that only windows 7/8 corporate customers are able to access NFS shares, which is a disappointment for most).

• Huge * Log files _cur.txt

  Hello

  We have some difficulties that some applications hang up because he is somehow the operating system creates huge logs (see attachment) in the temporary

  folder of the user. This will up until him becomes completely exhausted HARD drive...!

  I really have no idea how to solve this problem, I guess that this problem occurred with MS Windows Server 2008.

  I checked my local ------... \temp file (I use Windows XP SP3) and I found some of those files, too. But the al about 1 KB...

  I have attached the file of this type for example.

  Thanks for the help in advance.

  Solved!

  http://forums.NI.com/T5/real-time-measurement-and/temp-file-with-a-possible-path-leak-is-filling-my-...

• can I create a DLL file for labview that has DLL library with inside?

  Hello everyone,

  I am developing an application for the cards PCI devicenet in labview (beginner to labview) environment.  Is there a DLL file for the PCI card from the provider. But it's too complicated for a beginner to call each function in the DLL of labview. Therefore, I'm trying to re - use a VC ++ program (working properly) that calls some sellers DLL library functions.    To do this, I created the DLL file which includes all headers and libraries the provider DLL, as indicated in the attached figure. But I couln can't see the effect on the device. is it possible to create a DLL file for labview that has DLL library with inside? If this is not the case, how can I implement the program shown in figure?

  I would like to wish a huge as to advance.

  It is not something I have a lot of experience in so I don't know all the details of the restrictions or requirements etc - but it is certainly possible to create wrappers for the dll and then use them in LabVIEW - this is sometimes necessary to convert some native types/data structures in C/C++ into something that you can switch to your other DLL LabVIEW.

  There is a link here: http://digital.ni.com/public.nsf/allkb/06ECDC689DDA0F3D862574440074CD95

• How to create the new file alertlog.

  How to create the new file alertlog. Need the DB bounce?
  
  -Chandra

  H wrote:
  How to create the new file alertlog. Need the DB bounce?

  -Chandra

  Is that your alert log file size seems huge? Rename it with another name, Oracle will automatically creates a new name that alert_.ora

• If someone created a "save file" for Firefox, would cause problems?

  I had various problems (first to lose some of my FF icons, for example jpeg), now I have problems with
  my e-mail because the 'precarious' icons are appearing on most of the emails that have images. I've reached the point where I
  feel that I can't send these emails, etc..

  Noticed on the information menu "Refresh" here that if a 'refresh' is the fact that 'old data Firefox' on the desktop should be
  deleted. I DID NOT a DISCOUNT, HOWEVER THERE EXISTS a FILE ON THE DESKTOP "old Firefox data NAMED" inside and out
  There is a file named "." lxrajum2.default ".

  This package contains about 32 MB of information FF. I suspect that a computer scientist could possibly create a "backup file."
  I tried to do a 'print screen', failed however

  I HOPE THAT THE REMOVAL OF THIS FILE, OR UNINSTALL FIREEFOX AND RELOCATION WILL SOLVE MY CURRENT DILEMMA. I DON'T WANT TO LOSE FIREFOX.

  Hi Boudica
  I wrote in one of my replies above: uninstall and reinstall of Firefox or by creating a new profile will not help.

  I did not explicitly mention a reset/refresh, but a discount creates a new profile and attempting to transfer data to the new profile.

  • https://support.Mozilla.org/KB/refresh-Firefox-reset-Add-ons-and-settings

  It's really a problem of Yahoo and you could only solve this problem by blocking the content involved a content by blocking the extension Adblock Plus to uBlock for example.
  But I don't know what content they are everything and I do not use an extension of myself.

• I have a list of files on the left side and I am trying to create a new file. Whenever I create a new file, it will in a list/topic - as creating a

  All I want to do is create a new file and do appear in my existing list of files instead of a new file under a new title.

  I am trying to create a new file and it appears in the sent column where my files for e-mail are listed. Now he goes over these files under a different title every time creating a new file.

• Cannot create the .css file

  What happened to textedit, it's now the fubar for webdesign!

  I used to be able to create the .css files with text edit but now its locked to the rtf format and will not produce a usable file more.

  Look at the preferences and change it to RTF to plain text.

• How to create a playlist file

  How to create a playlist file

  Hello

  Double post. Please use:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/playlist-file/m-p/5101752

  Thank you.

• AppleScript - extraire extract values from a table, create a text file with these values

  Hello world

  Lets say I have a table that looks a bit like this

  

  And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these

  

  

  Is it still possible?

  I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.

  There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.

  Y at - it script-genius out there?

  See you soon

  Florian

  Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor.  The files will appear on the desktop

  say application "Numbers".

  say front document to tell the worksheet active

  say ( class is worn) fromfirst table whose selection range

  selectionRange defined in column 1 of the selection

  set cnt to 0

  the value destRange for range

  the value currentList to {}

  -the list of switches

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then

  switch and the value in the currentList currentList

  end if

  NTC put to the cnt + 1

  end Repeat

  -Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".

  Repeat with aswitch in currentList

  " game textOut to '# Script generated with Applescript for switch' & aswitch &"

  # on "& (today's date) &"

  !

  conf t

  "

  set cnt to 0

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  -Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".

  if (aswitch contains the switch) then

  the value cellCol to address a column of first cell of acellule

  address of line of first cell value cellRow in of acellule

  value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer

  the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer

  the value desc to the (value of the cell cellRow of column (cellCol + 3))

  " put to textOut textOut &.

  !

  "" IG 1/0 interface / "& aport &.

  switchport mode access

  switchport access vlan "" & vlan & ""

  Description LINK TO "" & desc & ""

  "

  on the other

  -Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".

  end if

  NTC put to the cnt + 1

  end Repeat

  Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission

  textOut write to myFile

  MyFile close access

  end Repeat

  end say

  end say

  end say

• Create sequential sequential files folders

  Hello

  I could really use to help decipher it. I have virtually no experience with AppleScript but needed a tool for all types of files with the same name of combing in one folder with the same name. I have to do 444 times, if I prefer a script or a solution of Automator. For example:

  1. txt

  1. jpg

  2. txt

  2.jpg

  Should give folders labeled 1 and 2. 1 contains 1. txt and 1.jpg; 2 contains 2.jpg and 2. txt.

  I found the following script in the support community (the first post here: create a folder from the file names)

  say application 'Finder '.

  the value current_folder to folder of in front of window

  the value x for (get the selection) as list

  Repeat with I have from 1 to the count of x

  set this_file to the point I of x

  If I is not 1 then

  the value previous_file to point i - 1 of x

  the value prev_ext to the cur_ext

  the value prev_name to NewName

  on the other

  game of prev_name to «»

  end if

  the value cur_ext for name extension of this_file

  Define new_name to text 1 thru - ((longueur de cur_ext) + 2) of (name of this_file in the text)

  If new_name is not equal to then prev_name

  new_folder value to create a new file with properties {name: new_name} to current_folder

  go to new_folder this_file

  on the other

  go to new_folder this_file

  end if

  end Repeat

  end say

  
  

  The error I get is as follows:

  
  

  error "Unable to get the text 1 thru-2 of \"1\. ' number-1728 text 1 thru -2 of "1".

  
  

  I would be very grateful to anyone who can help me decipher this error and fix it.

  
  

  Thank you very much

  
  

  Sam
  

  Replace the text:

  the value cur_ext this_file name extension

  the value text 1 thru - 2 + ((length of cur_ext) new_name) of (name of this_file text)

  with:

  the value cur_ext this_file name extension

  If (count cur_ext) > 0 then

  the value text 1 thru - 2 + ((length of cur_ext) new_name) of (name of this_file text)

  on the other

  new_name this_file text name value

  end if

  (138080)

• Error message Microsoft Word "Word could not create the work file. Check the amount of disk space on your startup disk. »

  I have a MacBook Pro, retina 13inch OS X el Capitan Version 10.11.1 with 16 GB of memory. It's brand new and I have recently installed Microsoft Word/Powerpoint etc. a disc that I bought a few years to my previous MacBook. It seems to work very well, but whenever I want to open a word document a message comes up saying "Word could not create the work file. Check the amount of disk space on your startup disk '. However, once I click 'OK' this message disappears and my word file opens without a problem. I have 16 GB of memory on this laptop and it's new I have not reached anywhere near the maximum amount of storage so I'm puzzled as to what this message means. How can I avoid that this message popping up everytime I open Microsoft Word? Any help would be appreciated!

  This has nothing to do with memory - it's the SSD. Word tries to create a temporary file to use as a backup if the program crashes while you are working. First, run the Microsoft Update program to see if there are updates you have missed. Second, Microsoft currently supports only versions 2011 and 2016, so if yours is older, you should consider the upgrade. Thirdly, I suspect that the temporary file is not get created so that you have fewer cancellations (maybe any) and that if the program crashes you have to restore.

• where to add the db CAN format when creating an exe file.

  I created an executable file to run on a PC not of LabView. When I run the file, I can't seem to select the database when I right click on the target computer. On my development machine, the exe seems to know where is the PB.

  I guess that the Pb, I installed on computer target in the right folder. Is there a 'best practice' to avoid this error?

  Thank you

  Thanks Hooovahh,

  I did include the DBC in the LabVIEW project and then include it in the EXE. I have also included in the installer, but what I is not install NOR-XNET on the target computer. I understand NEITHER-XNET DURATION in the installer. My question was on start up I have a dialog box select the database using a right-click of the mouse on the control (according to the test, the CBD may be different).

  the right click appear the selection "Browse for Database File... ", but it would not execute the file dialog popup after, so I had no database selected and initialization crashed.

  After the installation of NOR-XNET, the popup has worked and I was able to select the database what ever I wanted. Bottom line, I will include OR-XNET, not only the version of the Runtime for all of my installers using CAN.

  Thanks for the help programming, I will try and include your departure to check what aliases exist in XNet using the Get database list. This seems really smart to make sure that the wha DBC file are available.

• How to create the hierarchy without creating a Subvi files

  Hello

  I have an existing LabView program that uses blocks of Subvi.  I want to change it so that I can't copy files Subvi (when I transfer the program to another computer).  The goal is to have a single file/program that I can copy, paste, and run on other computers.  So, I want to know if there is a way to create the hierarchy without creating a Subvi files or how to integrate the Subvi in the program.  My program and Subvi files are included here.

  Thank you

  Rocky

  You can create a version in an executable file.  It would be the most common way if you insist on having a single file.

  You could also build a source distribution in a zip file.  Then you just copy and paste the zip file and unzip it anywhere where you want.

• How to create executables (.exe) file

  Hello

  I have a project in labview, when I save my result is a file .vi

  I want to create an executable file (.exe) that run in a system without labviwe.

  I have 'labVIEW Professional Development System' 2011

  pleas help me to do this

  Thank you

  in my Tools menu I found 'build application (EXE) to VI... '. »

  It has solved my problem and it's really easy.