Confused about the future of the Activation of Windows XP

Similar Questions

• Help! confused about the settings of windows 8 here

  So I have a desktop of windows 8. I used to be able to split 50-50 screen, next to the applications with 2 or more apps, but when my brother reformatted pc, I can't do split screen or more? like all I can do is this form of 80/20 with the other application to be reduced to a button. I can't resize the apps by dragging the bar, because it only reduces the already big screen to another screen of 80/20.

  I don't know where in the settings I can change it back to the old 50-50 or the custom function app side by side, please help!

  

  Windows 8.0 has only the 80/20 split, you see.

  You must install the 8.1 update to make it work right again.

  Let me help you and you get updated much faster than the default medium.

  1. Get the 8.1 update update - Yes it sounds redundant :)
     Update KB2871389 is the only one you need.  Choose the one for x 86 (32-bit) or x 64 (64-bit) bit processor on your computer. After installation, restart.
  2. Install the 8.1 of the app Store
     Open the app Store Windows and touch / click on the 8.1 update it offers.
  3. Install the 8.1 update
     Open the desktop version of the control panel (press on +X to get there quickly) and go into the system / Windows Update / updates and get all these.

  Oh, it's the fastest way to "clean up 8.0" to "completely updated" you can get.

• Confused about the notion of VLAN

  I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?
  MGMT is on vlan 4093
  DHCP is on VLAN 100 trunk e34 10.10.1.1
  Host 1 is on VLAN 200 trunk e34 10.10.2.1
  Host 2 is on VLAN 300 trunk e34 10.10.3.1
  active IP routing
  
  

• Confusion about the size of the array in Oracle 11 g

  There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:

  _____________________________________________________________________________________

  . . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568

  ____________________________________________________________________________________

  which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.

  But when I find the size of the table using the query:

  SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '

  He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.

  I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.

  Please get back with the answer to my query

  
  

  Concerning

  Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.

  John

• Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation

  Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
  I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)

  Thank you and best regards,
  Isabelle

  Hello Vero,

  You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:

  http://www.Oracle.com/technetwork/documentation/VM-096300.html

  You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.

  Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)

  Best regards

  Chetan

• Confused about the extension of the Sprite class

  Howdy-

  I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.

  My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.

  I explored the Open Flash Chart code and note that the main class extends the Sprite class:

  Base/public class extends Sprite {}

  What this lets you do?

  Also, on a related note, how to draw, say, a line once I extended?

  Without extend Sprite I could write:

  var graphContainer:Sprite = new Sprite();

  var newLine:Graphics = graphContainer.graphics;

  ...

  And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:

  var newLine:Graphics = this.graphics;

  My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»

  A number of things.

  First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:

  public function Chart (width: Number, height: Number) {}
  This.Width = width;
  This.Height = height;
  put in a background invisible to this size:
  this.graphics.beginFill (0,0);
  this.graphics.drawRect (0,0,width,height);
  }

  There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...

  Then, after that, your chart should be functional...

  Then back in your scenario, you could do this:

  import graphics. Table;

  Stop()

  var myNewChart:Chart = new Chart (300,200)
  myNewChart.render ();
  addChild (myNewChart)

• Question about the installation of Windows repair

  Hello

  I have searched through the forum, but I'm still a bit confused about the use of the recovery expert mode on my Toshiba Recovery CD.
  I can't boot into Windows at all. I didn't save my data (stupid!).
  I currently have a single partition.

  It is possible to create a second partition use the recovery expert mode and re - load Windows to that. Would this format only partition, allowing me to recover files after the first partition?
  Or is this format the entire disk, Windows loading and then create partitions?

  Any advice greatly appreciated.

  Thank you

  Fitz.

  Hello Fitz

  Expert mode allows you to do two things:
  1 install OS already persistent partition (if the HARD disk already has two of them)
  2. create own partition (in this case all of the content is deleted)

  Please try to start in safe mode (press F60). If this doesn't help, you can track to save your data:
  1. connect the HARD drive to the other PC as external device (using the box USB HDD)
  the disk HARD should be recognized automatically and you can copy your data to another disk HARD of PC
  2. you can try to use Partition Magic tool. Start by using the external floppy drive and create two partitions. After doing this start your laptop with discus throw and try to copy all the data on the second partition.

  Detailed explanation of the installation in expert mode and how to create a clean partition you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4462&messageID=14518

  If you have more questions please write again!

• When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image

  original title: video editing

  When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image. How can I see the video in its entirety, but long, so I can change it to what I want?

  What is the extension of the home movie file?

  Windows Movie Maker doesn't accept the formats of files (extensions) following:

  Video files: ".asf", ".avi", ".dvr-ms", ".m1v", ".mp2", ".mp2v", ".mpe", ".mpeg", ".mpg", ".mpv2", '.wm' and '.wmv '.

  * Extennsion file or the file format is represented by the last 3 letters of the file.

  If the file format of your home theater is not on the list above, google for a FREE video converter and a change in WMV format. Then re - import to Movie maker.

  WMV is the most reliable and foolproof format for Windows.

• I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution.

  Political pe Windows license, the terms and conditions of redistribution

  I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution

  For more information of WinPE 2.0, you can consult the following articles:

  http://TechNet.Microsoft.com/en-us/magazine/cc138016.aspx

  http://TechNet.Microsoft.com/en-us/magazine/cc160884.aspx

  http://TechNet.Microsoft.com/en-us/windowsvista/aa905120.aspx

  J W Stuart: http://www.pagestart.com

• Confusion about the requirements for the 2015 CC software

  I currently have Windows 8.0 (64 bit) which is so satisfactory and stable.  I have not upgraded to 8.1 Windows because I can't install same normal updates for Windows 8.0 without experiencing freezes system that only restore points can heal.  So for now, I would stick with what I have.  But the problem is the confusing requirements for various programs within the pile of creative cloud applications:

  Premiere Pro: Microsoft Windows 7 Service Pack 1 (64-bit) or Windows 8 (64-bit)
  Photoshop: Microsoft Windows 7 with Service Pack 1 or Windows 8.1

  Illustrator: Microsoft Windows 7 with Service Pack 1, Windows 8 or 8.1 Windows

  Dreamweaver: Microsoft Windows 7, Windows 8 or 8.1 Windows

  Hearing: Microsoft® Windows® 7 with Service Pack 1 (64-bit), Windows 8 (64-bit) or Windows 8.1 (64-bit)

  So what I'm confused about is the fact that Windows 8.0 is not listed for Photoshop, but Windows 7 and Windows 8.1 are.  Does this mean Photoshop CC 2015 is not compatible with Windows 8?  And that means that Premiere Pro is not compatible with Windows 8.1 since only 7.0 (SP1) and 8.0 are listed, I would have preferred the upgrade of software CC WITHOUT update Windows since I am picky on my installation of Windows 8 stable pipes now solid as a rock.  Fortunately, Illustrator, Dreamweaver, and hearing are compatible with all three, it seems.

  Can someone clear up the confusion, please?

  I think that my hardware is OK for this.

  Motherboard: Asus Crosshair Formula V-Z (AMD 990FX)

  CPU: AMD FX-6300 Vichera 3.5 GHz

  Memory: 16GB Kingston HyperX DDR3 2133 MHz

  Video: MSI N650-MD1GD5/OC GeForce 650MX

  Monitor: Acer S271HL of 27 "(1920 x 1080)"

  Power supply: Seasonic X-Series 1050W (SS-1050XM Active PFC F3)

  HDD1: Western Digital 320 GB (System)

  HDD2: Seagate SV35 Series (ST1000VX000 1 TB 7200 RPM 64 GB OEM)

  VidCap: Blackmagic intensity Pro HDMI

  USB hub: Rosewill RDCR-11005 5.25 "

  UPS: APC Back-UPS XS 1500

  Router: Netgear WNDR3700 N600

  System is NOT overclocked

  It is compatible but not tested.

• Confused about the new creative cloud

  Hi all

  Since I read adout the new creative cloud I'm confused about what will happen to my license for Adobe Lightroom. Will they remain still desktop apps as well or I have to pay for an annual license, if I want to use new versions of Lightroom?

  I am a casual photographer and I like to use Lighroom for my photos, but I don't think that pay for an annual license because I'm not spending a lot of time, image-editing.

  Can someone clarify this for me?

  Thank you very much

  Lucian

  5 Lightroom does not have subscription only, you're fine. There is no sign that it will even happen in the foreseeable future either.  It's just the ex-Creative-Suite that all talk.

  Target market of Lightroom is different from the Creative Suite/Cloud. CC is a good deal for the majority of its base of users (next door), while the majority signed without major complaints.  Lightroom has a huge customer base amateur, and they would be much more difficult to convince us to go subscription only. They would be likely to lose most of customers of Lightroom at the moment, and they are not completely stupid.

• Confused about the capacity of the HARD drive on my new Equium L350

  I'm rather confused (normal state) about the capacity of my hard disk. This is supposed to be 120 GB but... On 'My computer', it shows that I have 23 GB of 55.7 left GB on Vista C and 49.8 54.5 on E of data that is delivered to about 110 GB.

  I'm already about 10 GB missing but maybe that is taken up with hidden files. More worrying is that I have so little space on Vista C. Can I save files on the data partition, or is that a no-no? So far, everything I've loaded on it goes into Vista C.
  Any help would be appreciated.
  Thank you

  I agree with InvaderZim.

  But there should also be another reason why the two partitions of HARD drive are smaller than the whole HARD disk.

  I assume you are using the Vista operating system.
  Vista uses hidden for some files from recovery partition.
  If you check the Disk Manager, and you should see all available on your HARD disk partitions.

  See you soon

• Confused about the creation of a .db file for the first time in the property fodler

  How can I create a file .db for the first time and bring it to assets by program? If I have to create manually on the current folder, then how I can modify it. I read something about copying program to a different folder and edit it. But then I have to copy it on record new assets which should be limited by program. According to me, Miss me something here. But I can't know that. I really need help on this problem. Thank you.

  The only way you will get a file .db in assets / are to put it there on your PC, when package you it application.

  This file is supposed to be read-only in your application? If this isn't the case, you don't want it in the current folder anyway.

  Maybe you can explain why you think that you must have a .db in the active folder anyway, instead of somewhere else. Is there that a documentation means that you should put this active file? Or are you assuming that the current folder is special somehow I suspect, that he really isn't, at least for the .db files?

• Confusion about the Source of excitement in the bridge SMU-4331 input module

  Hello

  I had some confusion through the input of the bridge SMU-4331 sheet module.

  In the features section of excitement, its current Minimum as 29mA says. What it means. It can only current greater than 29mA delivery!

  

  I think this should me Maximum current specification.

  If you look at the table below

  

  350 ohm resistance, the current should be 10V/350 ohm = 28.5mA

  but for 1 K ohm, current will me 10V/1Kohm = 10mA, which isn't normal, if you specify current minimum as 29mA.

  any thoughts?

  Kind regards

  Mirash

  Hello Mirash,

  I'm glad I could help!

  As for your other question, the SMU-4330/4331 are inherently peripheral ratiometric.  This means that they are designed to detect the level of excitement and range of the ADC to the appropriate scale.  In this way, we can compensate for permanent changes in the voltage.  One of our engineers wrote a big article really nice area on the subject I would recommend that you take a look at: Sensors of Measuring Bridge-Based with the ratiometric approach

  See you soon,.

• Confused about the use of Fusion and boot directly to Windows via Bootcamp?  I thought that my installs would be synchronized?

  Recently, I installed Win 7 64 Ultimate using Bootcamp on my iMac 27 inches in 2010. It wasn't a problem. I then install Fusion 3.1 and import my install of Win 7 Bootcamp. Everything went well. I am using version VM to work related things which requires Windows and did not start directly into Windows for the first time, I installed and applied all the updates.

  Anyway, today I wanted to start Windows to the demo of a game. No much, that the installation of Windows seems work fine. But, I expected to see all applications and files installed there is just the way I did in the virtual machine. I thought they were basically the same facility and would be fully synchronized, but they are not.

  I'm doing something wrong or is it the way it is supposed to work?

  Is it possible to make two "versions" be the same whether in the machine virtual or kick directly?

  Because you 'imported' you see the expected behavior because an import is completely separate and apart and not linked to the original.

  On the other hand had you just clicked the button Start Up on Boot Camp entry into the library Virtual Machine, then you'd be using native installation as a VM.  However, a word of warning is in order that WPA (Windows Product Activation) can be problematic, Microsoft may require you to have two separate licenses and this is beyond the control of VMware when VMware Tools fails to control who after he activated in each environment.

• confused about the function of culture

  OK I've been using photoshop for a while but it has the function of culture changed?  My question is, when I crop a picture, even though I have crops on a very small section, the file remains the same size (pixel dimensions).  If an image is 60 m and I have very small crops, it remains 60 M and 5616 X 3200 pixel, for example.  I'm a bit confused by the present, I'm sure that when I have cultivated an image before it reduces when I cultures.  I hope that I myself make clear...

  any help appreciated.