Creating users in a status of disabled in IOM
I'm performing in IOM reconciliation against a flat file that contains employees active and completed. I need to create accounts for employees completed IOM, but these accounts should be disabled until all resources are never placed in service for them.I tried to create an adapter of pre insertion feature that disables the accounts of employees completed before creating, but I got an error message indicating that you cannot create users in a disabled state.
I then tried using the same entity, like an adapter card after insertion and this with success off the accounts, but is that after already provided resources. I think it's because the adapter is placed below the map to entity tcUSRautoGroupMembership, but I get a security error whenever I try to move the tcUSRautoGroupMembership below my adapter adapter.
Is there a way to disable a newly created user account until it is put into use all resources that are automatically allocated to the unfinished users?
You can also try to use a deny access policy. If you create a UDF that says start the service or not. You can create an access policy deny for a default value that you provide. Then when you update this field are based on a factor, it will allow other access policies, and to trigger provisioning. You can also create another task triggered the UDF and attach it to the user Xellerate process. On this task, you can check the value when it changes, and if you need to disable objects, you can use the API to find and disable as needed.
-Kevin
Tags: Fusion Middleware
Similar Questions
-
Access policy for the user whose status is "disabled until the start date.
Hello
By default political access does not work for the user whose start date is later in OIM 11 g. I have an access policy that the provisions of all users of Xellerate OID. This policy is not work for users who start date is later, i.e. status = disabled until the start date.
No workaround to make the strategy work is much appreciated.
Thank you
GYANup to 10g it work very well if you put provisining date as the current date. But, you cannot apply even in oim 11g
Try below
Add new udf to the user profile
reconcile the start date in the new udf and leave the start of oim null date
In this case the access policy will be triggers and you will be able to get an account created to the OID, and then set the start workflow OID IOMfor reminder and all just to add trigger for the new udf and update on the changes.
Note: In your case as OID in disable State it will cause no problem after the user status "disable up to that Start Date. If the resource object in activate State and change you the status to disable up to that starting date, it does not fire disable the user trigger.
Kind regards
Mireille nayan -
The 'Save' button disabled in create user form
Hi all
In OIM 11 g, I created few users and after that all of a sudden the Save button has been disabled and it is not allowing to create users
Could someone guide me on this issue please... :))
Thank you
KumarHave you tried with disconnection and again to connect
Or have you tried with the restart of the server.
If you don't try, just give a try.
All of these access is managed through authorization policies.
-
Create new commercial area Option is disabled for particular user
Hello
Am on 12.1.3
DB 11 GR 1 material
Discoverer: 10.1.2.3
I created a new user:
When I tried to connect to thr disk administrator:
Create new commercial area Option is disabled - sound for this user only.
Then, I compared this user with other users... I have foubd I have not attached Application Developer RESP to this user... Apart from that, I do not found any difference.
But problem not solved...
Thank you
VishwaHello
Connect as disk administrator system administrator...
Go to tools - user \n(Assurez-vous-recherche...
check the \n(Assurez-vous Administrative & business to create/edit area.
Thank you
KSV. S/N -
Reconciliation of trust customized creation of users with the status of "Disabale" - 11g
Hi all
I developed a custom for the reconciliation of confidence scheduled task, when the user is first created in IOM I want them to create the status of "disable." Mapping of the attribute of 'Status' IOM FRO reconciliation data n does not work correctly. How can I achieve that? I should create a certain Manager evnet this? Any help is greatly appreciated...
Thanks in advance,
BR
Aliyewrite a post process event handler and call the disable User Manager API. Mapping status reflect the corresponding RAS
Disable UserManagerResult (java.lang.String userID, boolean isUserLogin)
ex: disable (useLogin, true) or disable (take, false)
-
Process event causing another event of creating user
I have a setup of successful automatic provision made of OIM to OID. When I create a user in the IOM, she get supplied with OID immediately.
I recently added a Post-quadrichromie event handler code to the event to "create a user". PostProccessEvent code generate a custom Unique Id and set it to one of the custom user (named "MicamUniqueId") attributes during the creation of the user through the screen of the IOM. This works as expected and I see the value of the attribute "MicamUniqueId" once the user successfully created.
However, now I see two events provisioning tab resources.
(1) one with the status 'configured '.
(2) other 'Provisioning' status: details report, said "the user already exists."
The status of 'user already exists' must be the PostProcess event. Looks like the code post-process triggers another event "Create User" instead of "Update User' event.» I guess I'm doing something wrong in the code of PostProcessEventHandler. Here is the code snippet.
Anyone can understand the error?
Thank you!
-Kabi
--------------------------------------------------------------------------------------------------------------------------------------
public class GuidGenerationPostProcEventHandler implements
{oracle.iam.platform.kernel.spi.PostProcessHandler}
:
public EventResult run (long processId, long eventId, orchestration of the Orchestration) {}
HashMap < String, Serializable > params = orchestration.getParameters ();
String uid = this.getParamaterValue (params, Constants.USERID);
OimUserManagerOperations usrModifyOperation = new OimUserManagerOperations();
usrMgrOperation.modifyUserAttr (uid, "Micam Unique Id", getGUIDinString()); see the class UserManagerOperations
Return (new EventResult()) End Function
}
:
}
public class UserManagerOperations {}
:
' public void modifyUserAttr (String uid, String, attrName, attrValue String) {}
the oracle.iam.identity.usermgmt.vo.User user = new User (null);
user.setAttribute (attrName, attrValue);
try {}
usrMgrService.modify (Constants.USERID, uid, user);
}
catch (...)
:
:
}
--------------------------------------------------------------------------------------------------------------------------------------Hello
I faced a similar with API UserManager sometimes question of return, I used entitymanager and it worked.
You can use the entityManager as follows APIBishop EntityManager = Platform.getService (EntityManager.class);
OrchestrationTarget target = orchestration.getTarget ();
String entityType = target.getType ();
String entityId = target.getEntityId ();
attrs.put ("StatusHidden", "Disabled");
e = mgr.modifyEntity (entityType, entityId, uploading); -
IN WINDOWS 7, cannot save the files to the desktop, the error msg says I don't have permission to do this and to cantact admin but I m user having admin status. ALL SUGGESTED SOLUTUTION? THE FILE in question is created with ms word 2007. I can record on other places lik e in drive D: etc.
I could open your Explorer of files and go to C:\Users\Vanbee (or any folder of your user name), then right click on the folder on the desktop it there and go to properties. On the Security tab, make sure that you have a full control on the folder.
-
Where should create user information be in the approval workflow?
I have created an approval workflow that is patterned after the Oracle DefaultOperationalApproval with JDeveloper 11.1.1.7.0 example. I am able to see the information of the applicant and request model information. This is the xml code that I can see from Enterprise Manager (11.1.1.7.0).
"< ns2:processxmlns:ns2="http://xmlns.oracle.com/ApprovalApp/AlliantOperationalApproval/ApprovalProcess"'xmlns="http://xmlns.oracle.com/request/RequestDetails">
< IdDemande > 240 < / RequestID >< RequestModel > Creating user < / RequestModel >
< RequestTarget / >
< OtherDetails / >
< / ns2:process >
In researching this issue, I see that the BeneficiaryDetails has no new information of the user depending on this issue.
Where should I see the Dataset in the payload? I guess I may have some incorrect mappings? I need to find the UserType and new user name and other information.
Thank you
Tom
If you go here in the Oracle assets: http://www.oracle.com/technetwork/middleware/id-mgmt/overview/oim-11g-assets-504842.html
There is approval workflow and a 11.1.2.0 example. It contains the final workflow that can be deployed. You can take this as an example and information out of it for your authorization custom which may help to recover what are necessary.
-Kevin
-
Sound signal when the user changes the status?
Hello everyone!
I'm quite new to Acrobat Connect Pro in the role of a trainer. It ist one feature miss me: an acoustic signal or notification when a user changes his status.
For example, Users must satisfy a task that takes several hours. Coach, I'm online all the time to help as needed. But I need to watch my screen all the time for notice if someone has a question. I would like, there will be some sort of sound signal. Is there something like this? If this is not the case, this could be a feature request.
Greetings
Marcel
To use the doorbell pod to connect, simply download the SWF to a sharing module in your room (even by uploading a JPG or PPT). Should that pressure manual button when someone 'status' changed, but that may be the method of the student to notify you that they are made to their task.
If you feel that you need the exact feature you described above, you can check to build your own custom pod (should you be savvy with AS3) using the Collaboration Builder SDK found here, Adobe Acrobat Connect Pro | Adobe Developer Connection, or you could reach to one of the groups which proposes the establishment of custom pods. ActiveC is one of these companies, custom - development ActiveC.biz.
Connect is unique in offering the possibility of creating your own functionality should the default options does not meet your needs.
-
Hi all
OS: Win XP
DB: 11.2.0.1
I installed an oracle in my system. Created a database test and try ti create a user, but is in error.
SQL > create user test identified by the test.
create user identified by test test
*+
ERROR on line 1:
ORA-01031: insufficient privileges
I connected through "sys as sysdba.
What can be the problem?
Kind regards.OK... I got the link to disable DV.
http://www.filibeto.org/Sun/lib/nonsun/Oracle/10.2.0.1.0/B19306_01/server.102/b25166/dvdisabl.htm#BAJICEFE
Now I'm able to create user...!
Thnks... !!!
-
Hi all
I'm trying to understand how to create AD user task is triggered automatically when a new user is entered in the IOM.
I have an access policy that gives all users access AD. But I don't get, where exactly is a call made to the process task AD Create User OTB.
Pls help me to understand this.
Thank you.
~ THE VSNWhenever a start-up operation is launched, first all the unconditional task will trigger (create user is one of them).
Check create user task, conditional flag would be disabled.Thank you
Suren -
IOM Provisioning - OID Create User fails with a weird error
Hello
I have the auto layout installation service using access policies, the user is to created in IOM, then he's trying to delivery to the OID.
I get the following error while trying to create the user in the OID. The "Create a user" task is rejected status with the error "Could not create user".
DEBUG, December 6, 2010 14:07:33, 573, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: getMultiValues(): COMPLETED
DEBUG, December 6, 2010 14:07:33, 574, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: escapeCharactersDN(): STARTED
ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID,] ERROR in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) generic Exception Exception:
ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],
ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
DEBUG, December 6, 2010 14:07:33, 575, [XL_INTG. Election of OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) with the code: USER_CREATION_FAILED
DEBUG, December 6, 2010 14:07:33, 575, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: disconnectLDAP(): STARTED
I mentioned the following post:
IOM - OID Direct Provisioning of users newly created via the err access policy
Mistakes are similar, but it seems that in my case the container DN is updated using the adapters to prepopulate.
Any ideas to fix it?
Concerning
Vijay ColinI would recommend to sniff the connection (http://iamreflections.blogspot.com/2010/08/how-i-learned-to-stop-worring-and-love.html) or decompile the connector.
Newspapers are not very useful.
Best regards
/ Martin -
Essbase create user option.
Hi all
I use version 11.1.1.0.1 of hyperion hyperion.
Through a single document, I got to know we can create user in hyperion Regional service console,
but the option to create a user isn't enableed for me.
Can someone tell me why this option is disable for me?
Thank you
HP
Published by: user11358816 on January 4, 2010 03:00Hello
If you use Shared security services then you will not be able to do so through the Regional service.
You can use the Shared Services or Maxl to create the user.See you soon
John
http://John-Goodwin.blogspot.com/ -
HTMLDB_UTIL.create_user_from_file did not create users
I have about 100 end users who need to be created for an application. I downloaded a file (static) containing the test user names and passwords:
RR1, [email protected], rr1
Rr2, [email protected], rr2
I ran a script to bulk create users in the file above using the HTMLDB_UTIL.create_user_from_file API. The p_id parameter (the id of the file in wwv_flow_file_objects$) is hard-coded. The script run "successfully", but no users were created. I was logged as a developer/admin "AUNGAR_RR". Should the 'RAPID_RESPONSE' or AUNGAR_RR analysis scheme certain privileges to database for the API call? Your help will be greatly appreciated.
---------------------------------------------------------------------------------------------------------------------------------------------------------
Script: bulk_create_rr_users status: execution
View: Summary Detail
Show: Results Feedback statement
--------------------------------------------------------------------------------
DECLARE
v_start VARCHAR2 (100);
v_end VARCHAR2 (100);
v_loaded VARCHAR2 (100);
v_id NUMBER;
BEGIN
() HTMLDB_UTIL.create_user_from_file
P_ID = > 1.45907243121951E16,
p_mode = > 'CREATE ',.
p_format = > '1',
p_app = > 'RR_DATA_ENTRY ',.
p_start = > v_start,
p_end = > v_end,
p_loaded = > v_loaded);
END;
Statement processed. 0.05 seconds
--------------------------------------------------------------------------------
Managed by AUNGAR_RR
Analysis of schema RAPID_RESPONSE
Script started Tuesday, December 2, 2008
0 seconds ago
Elapsed time 0.19 seconds
Treatment 1 statements
1 successfully
With 0 errorsCheck the detail to the output view, and you should see the output of dbms_output.
Scott
-
Model 48L5441DG - each time creating user menu appears
Hello
I have the model 48L5441DG. and whenever I click on the button that I need to create a new user account to the House!
each time creating user menu appears instead of going to the home page of profile.
is this a known issue?
I checked for updates of firmware but not exist for this model.
are there updates the firmware for this model?
Thank you
If you have already created the account Smart-TV the TV should save the connection data and new account creation is not required.
Please try to reset the default TV and try again.
Maybe you are looking for
-
Convert MP3 320Kbs in 192 Kbps files
I've marked "do not show again"the warning box"convert files to 192 Kbps" that appears when I import songs downloaded from the Google game. How can I check this option?
-
I have 6 left usable fall 3 months now haywire
I was using my i6 after a fall of wicked where glass it came off-screen for 3 months, out of blue has funny lines and I can't seem to use fingerprints or unlock to answer phone, can hear alerts on the phone trying to: Transfer data with USB for Surfa
-
I am running Windows XP SP3, nothing has changed between yesterday and today, I couldn't get to all computers yesterday. Any help would be greatly appreciated. We also have Norton antivirus and it is updated and even once, it has not changed since
-
display on the side... Help
ACCIDENTALLY SLIPPED ON KEYBOARD NOW DISPLAY ON THE SIDE LEFT DON'T KNOW HOW TO MAKE IT RIGHT AGAIN... Help
-
Is it posible to create a disk drivers from XP installed software?
Our non profit organization has received many laptops (Dell Latitude D430) as gifts. They did not come with driver disks. I would do a fresh install to remove the remains of the former owners, but I will remain without the drivers for the hardware in