Stream7 create a recovery media after upgrade to win10

Similar Questions

• T430s and create recovery media after upgrade to win 8 Win 7

  Is it possible to create a recovery media after upgrade to Windows 8 of a factory installed Windows 7?

  You do before the upgrade.
  NO.

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• 500 - 81ea: create recovery media after upgrade to windows 10

  I created a USB recovery when I used my PC (using the 8.1 window)

  I had a time to use it to perform a destructive restore but then had to wait for all the upgrades automatically install to get me back to where I was and of course all my other software such as iTunes and music, photos, etc.  Checking to see if I can upgrade to windows 10 I was informed that my windows was not up to date and that I didn't know the logo windows at the bottom right of the screen. I have now been in the screen of windows update and installed quite a few updates and now have the upgrade of windows application.  My question is if I upgrade to windows 10 and then must perform a full recovery can I do new media of recovery or I'll have to go back to windows 8.1 using my existing media and then updateHP software and windows 8.1 and upgrade to windows 10 and the free update will be always available or is there a way I can create new media recovery to allow me to recover Windows 10 OR an altrnative goes back to the creation of a backup drive on an external hard drive and a way to get this image on my HDD internal. OR to simply stick with windows 8.1 and hope, that it is taken in charge as long as XP was.

  THANKS IN ADVANCE FOR ANY HELP

  JIMBO

  Hello

  First things first. Don't forget that your USB stick recovery is the HP external recovery media and not just another type of recovery image. Back up your data. Check that your PC is supported by HP for Windows 10 and that your PC meets the requirements of Windows 10. If so, then be sure your Windows 8.1 system is fully patched and up-to-date with Windows and HP implemented to date.  When you make an in place upgrade W10, W10 process will have a roll back feature that will be available in case you are not happy with the W10.  I made a couple of back roller and the process was pretty quick.

• Creation of recovery media after upgrade to 8.1 Windows

  My computer is a year old and came with 64 bit Windows 8 Pro. I did my recovery media.  Then, they offered an upgrade to a 8.1 free Pro 64-bit.  I took this.  You cannot use the recovery media HP App again to make a floppy of 8.1.  I went online to try to do and could do it, but I only have my OEM # put in and who doesn't.  Download not free any # is product key came with version 8.1.  I tried to use the product key provided with your computer, Windows 8, and it did not work.   How can you now create recovery media for the free Windows 8.1 that has no new product key?  I can retrieve only to Windows 8.  How worthless is that?

  Hi sandnurse,

  You are absolutely right.

  Microsoft will not allow the creation of a Win 8.1 installation disc using a product key to win 8.

  You can buy a disc installation Win 8.1 OEM or retail.

  Jaco

• model 550-223w: cannot download the recovery media after upgrade Windows 8.1 for Windows 10

  Buy computer with 8.1 Windows preinstalled on July 9, 2015.   Downloaded disc recovery media for Windows 8.1. Elected to download Windows 10 and even installed on July 30, 2015.  Attempted to download the recovery media for Windows 10 but refused because 1 only one download is allowed.  How can I get the computer to download Windows 10?

  For some reason any warranty start date is also may 5, 2015 instead of the date that I registered the computer with HP.  How can I change the start date?

  See the link below

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

• Cannot create recovery media after installing the SSD on Pavilion TS 11-e100

  Hello

  I just replaced the SSD HARD drive and tried to make a USB support of recovery through 8.1 recovery utility. The process takes strangely little time, but finishes normally have reported that the media are created. The size of all the files on the flash is about 200 MB. When I made the same support with disk size was 12 GB. I tried to start with than flash and it failed with a message on a damaged or similar medium. I always thought that windows does not take into account the physical structure of the disc and can not understand what is happening and what to do.

  Hello

  I use HP Recovery manager to create a recovery media for my machine ready and my wife. I use another software to clone HARD disks for other machines after any big change for example after moving from Windows 8 to 8.1, I create a clone which means I can't do it again, simply restore it back. Use a software called O & O DiskImage clone but the following free software can do the job:

  http://www.techsupportalert.com/best-free-drive-cloning-software.htm

  Kind regards.

  PS I tested once the 3rd software, it's ok

• Create product recovery media does not work after restoring to factory settings

  Updated my T500 from 160 to 320 GB.

  First of all, ran the RnR restore to factory settings with the product recovery media that I made earlier. And then restored my C: volume from my Windows Home Server backup.

  Everything seems as usual except my service partition is now f: instead of S: and my Lenovo partition is H: instead of q:-I tested it I can get into the RnR with F11 service partition.

  But when I try to create new recovery media product the ICT box is grayed out on the first prompt so I can't continue. Put back the partition of Lenovo on q: in disk management has not changed anything, he would let me change the letter of the service partition.

  It's no big deal - I still have my original disks - but it would be good to know what I could improve for the next time I have to do a restore.

  Think that I thought about it - when I restored my C volume I also restored a version of RnR who 'knows' I already burned disks. So next time if I want to burn new disks, I need to do on the version of the system factory setting before you restore the volume C:.

• HP Notebook PC 15: create system recovery media

  my laptop has a message asking to "create a system recovery media. Since the purchase of the laptop, I have upgraded to win10 (the free version online), of win8.1, which I upgraded to 8.0 immediately after purchase. I have a set of 3 drive recovery I think I did when I bought the HP. The instructions indicate that only a game can be made. In addition, the instructions show that more than 3 disks are required. But when I start the process only a USB option is available. How can I determine if the 3 disc set is the right game for this PC? I'm confused.

  Hello slickamis;

  Let me welcome you on the HP forums!

  I read your post on creating recovery media and wanted to help.

  If you create HP recovery support before proceeding with the upgrade to Win10, it's a waste of time trying to do it now.  Why?  Two reasons...

  First of all, the update of Win10 has a bad history of corrupting the recovery OEM information, and if this happens to you, any media that you create does not work.

  Second, that the media would have been for the original operating system, and the recovery information are not updated when you upgrade the Win10.  So the media could serve as a recovery of Win10.

  My suggestion is if you want to create a recovery media for Win10, then consider using a third-party solution known as Macrium reflect (MR).

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Satellite U840T - cannot create USB recovery media

  Can someone advise please - I have a new U840T Satellite with SDDS and try to create a recovery media using a USB key.

  The Toshiba 'Recovery Media Creator' inviotes I plug a USB key at least 10.4 G. So, I inserted a new USB 16G. The app clearly did not see this, even if it is recognized by the PC itself, no problem.

  When I press 'create' to load the stick, the app just says: "the process of creation for all media was cancelled" is not only wrong spelling, but completely useless.

  I do something wrong, ir is just a very poor app?

  Thank you very much...

  Hello

  Format you the USB drive before you start the Toshiba recovery media creator tool?
  Please format the USB key, then run the Toshiba Recovery Media Creator.

  Here are some details how to use the TOSHIBA Recovery Media Creator
  http://APS2.toshiba-tro.de/KB0/HTD16036F0000R01.htm

• HP Pavilion 15-p020ca: create USB recovery media, delete the Lexar USB encryption?

  Hey guys, try to create USB recovery media. Want to know if the Encrypt-a-Stick Lexar software should be removed from USB before that. Or, can be used to password protect the USB recovery media? Don't think it's necessary, but if it can be used I could go that route. Thank you, pcpunk

  Hello

  Please remove, make one a blank USB key.

  Kind regards.

• Satellite-T230D fails to create a recovery media

  I have a T230D Satellite under Windows 7 Home Premium. When you try to create a recovery media using a USB key, the process begins by informing the Flash DRIVE will be formatted.
  At this point, it fails with the error code 040EAE-57-00000000. The USB key is left in an unusable state and cannot be reformatted by Windows.

  The HP USB Format utility is able to reformat the USB drive.
  Before you begin to create the recovery media application, I disabled VirusControl, firewall and Internet access to make sure that nothing got in the way. I tried this twice with the same result both times.

  Can you please tell us what USB device you are using?
  Have you tested with different keys memory USB flash?

• HP Envy X 2: laptop recovery partition (D) merged with another partition, not be able to create a recovery media

  I have merged my restore partition HP with another partition I created. Data recovery files are still intact in the New Partition. I have not created a recovery media. When I tried to create the USB Flash Drive recovery using recovery HP Manager media, I get the message that "recovery partition does not exist. How to get again the merged recovery partition and create a recovery USB Flash drive. If simply copy data from recovering files to a USB flash drive will work as a Bootable media in the case that need if in the future.

  @joy1964: should not have done that.  Messing around with the OEM partition somehow good enough recovery ensures it won't work not later, when you need it.

  Personally, I don't trust recovery integrated systems in any case.  You want to be able to recover from an image stored on a disk system large capacity Flash DRIVE or external.  In this way, if the disk fails, I can restore a functional system within minutes.

  Consider using a third-party product known as Macrium Reflect this.

  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  AND... you no longer have the recovery partition at all and can reuse that space for something else.

• How to create a recovery media in Windows 8?

  You can become the owner of a new HP laptop, but unsure of how to create the recovery media so that it can be restored if this scenario arise.

  This video explains the process of creating the recovery media in Windows 8 on HP systems.

  I hope this information is useful for some.

• Create a recovery media using a USB Flash drive

  Computer SONY Vaio laptop model #SVE14A35CXH Windows 8

  I'm unable to create a recovery media using a USB Flash drive.

  The computer recognizes the flash drive in my computer as drive E. When I try to create the recovery through media sat DOWN, my flash drive is not recognized.

  If anyone has had this problem and if so; How can I fix it?

  Hi cmptrsue, are there any error messages? Is it possible to create another recovery media using another usb drive? You can use this link as a guide in creating a.

  If my post answered your question, please mark it as "accept as a Solution.

  http://bit.LY/LapMagWin