credentials expired

Similar Questions

• Cable 802. 1 x an authentication failure - credentials pop-up window

  We have recently implemented dot1x wired network authentication based in institutions; majority of PCs are windows 7.

  It is necessary to have a PDP Windows once all authentication failure happens on the LAN NIC. What we are doing is running the wired autoconfiguration service, and in the authentication network adapter tab, we store the credentials of the user; Once these credentials expire or authentication fails for some reason, the network card indicates that the authentication failed, but he he invites, on the desktop or anywhere, a pop-up window that allows the user to enter different credentials.

  Is it feasible by any means of configuration in windows 7, or by the code?

  Appreciate your help, thank you.

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Request ID expired?

  Over the weekend, my app ID stopped being accepted and I am now a "rc = 10002" response. I could not find any information on the duration of push service references are valid, or if there is an expiration period at all. I have inherited the development of this application and was not the original developer to join our application, so any email with this information is lost to me. Is it possible that my app ID is expired and if so, should I just to register in the register of identification?

  Thanks for any help.

  Yes, your credentials expire. I don't know what is the amount of time, but if you send the RIM I don't know that they can extend your credentials. Keep in mind in the environment eval/sandbox account is active for 3 months.

• Question form and expiration extended drive

  Hello

  I have a question about drive extended forms and expiration.

  The following scenario will exist?

  Reader expansion license expiration Date: April 1, 2012

  The drive model extended: December 31, 2011 with the above license

  The user opens the form on June 1, 2012. Is the form player always extended at this stage?

  
  Notice that we don't not player - extend (as an activity in our process) every time the form is rendered. Instead, we drive - extend the model and place it as an asset in our ABI.

  Thank you

  Bernard

  It is a response from both sides, first to answer your question, and then to raise an issue of General License.

  To answer your direct question, the rights of extension drive will end when credentials expire (in your example, April 1, 2012). After this time, the user will receive a message that depends on the version of the player.

  • If it is the Reader 8 or before, they will receive a message whose form has changed and that rights are no longer available.
  • For reader 9 and above all, messages have been improved, so that it will tell you that your form has passed the expiration date and that the user needs to obtain a new form of the creator. It will then differentiate between production licences and assessment to tell you which side of things the original RE license fell on.  And then, he'll be saying that you can always view and print the file (it is still a complete in PDF format), but you will not be able to record or perform other duties compatible rightes.

  But the biggest problem is that you seem to not have license appropriate in place.  Production licences have long-term (good until 2021 or 2023) licenses. The fact that your license expires in 2012 says that you were using the evaluation or development of licenses and qualifications, which all tend to have time-outs from three months to two years. You can see the details of your license on the server of the user interface (a 'get info' do) or via Acrobat (Niall explained the technique in another thread - see October 24). And if you are one of them, get the ID number (the identification information will be identifies as P23 or another P with two figures) and I can decode for you.

  The question is independent of the question of if you drive - expand once or you drive to extend a process for each form.

• Why I get this message when registering to hotmail: "your credentials are invalid or have expired. Please click here to log in again. "IE8. Win-XP Home, SP3

  Today I get the following message appears when loggin my Hotmail: your credentials are invalid or have expired. Please click here to log in again.

  When I click on the word here nothing happens and returns the message. It started today, September 27.  Fred

  Hello

  As the issue is specifically related to Hotmail, I suggest that you post the question on the link provided below for assistance.

  Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

• How to connect an expiration date in the ID and the password set cached?

  I have windows 2003 race. I would like to know if there is any kind of code and where it must be added have log vpn users in the local network before they user of the laptop to go on the web?

  In other words, how I plug in and the expiration date for the caching of id and password?

  I'm not sure that's what you want.  You can change your machine such as passwords are cached at all, but then a person could not connect to his laptop unless it is connected to your domain, when it connects (forget not to use your computer on a plane).  If you want to control access to the internet, many businesses use a Proxy Server with a password to regulate the internet connection.  See if these MS articles shall apply:

  "Caching of security credentials in Windows Server 2003, Windows XP, and in Windows 2000"
    <>http://support.Microsoft.com/kb/913485 >

  "Cached domain logon information.
    <>http://support.Microsoft.com/kb/172931 >

  HTH,
  JW

• T510 AD expired password

  I'm in an environment Windows Terminal Server R2 2012. All servers, including my domain controllers are 2012 R2. Currently, I am working on creating a password policy to force users to change their domain password every 60 days.

  Password policy worked on the thin client T5550 once I disabled local authentication on the client and the RDP session request credentials when it hits the server.

  My problem is that I can't find the place to do it in t610 and t510 models. She wants if authenticate to the Thin Client operating system that works when you are not required to change your password, but once the password expires or is the force of change it will not allow the user to connect.

  The T510 is running an exclusive HP operating system and no Windows CE or Embedded as my former models. I tried to flash with windows, but it is not registered on the machine and won't take.

  Any suggestions would be much appreciated.

  The following manual will give you more details on the T510.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=5226831&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c03817821%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

  The T510 and T610 are compatible with WES7 ( Windows Embedded Standard 7) operating system.

  The following manual describes how to upgrade the key for authentication.

  http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c03162530-2%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• vCenter 6: research MOB Service repeatedly prompts for credentials

  Hello world

  We have 2 vCenters Windows based in our environment, with the following windows + vCenter configuration of version:

  Windows Server 2008 R2 with vCenter 6.0 Update 1 (Embedded Architecture PSC)

  Windows Server 2012 (not R2) with vCenter 6.0 Update 2 (Embedded Architecture PSC)

  On both of these vCenter, we replaced the machine graduated with a 3rd party CA signed certificates (in the case of the vCenter 6.0U2, this has been done while version 6.0U1.)

  For some reason, trying to apply patches with SSL trust anchors broken documented in VMware KB: vCenter server certificate validation error or a service platform for the VMware Solutions external... controller When you go to the search interface of the MOB service @ https:// < vcenter-FQDN > lookupservice/mob, I'm prompted repeatedly for credentials to connect.  I tried the [email protected] account, but also integrated AD who have administrator SSO access accounts.  In both cases, these identification numbers can connect to the PSC / vCenter, fine, but nothing seems to authenticate with the MOB interface for the search service.

  On the two vCenters as well, if I try to access the web interface of the PSC via https:// < vcenter-FQDN > / PSC, I get an error:

  State HTTP 400 - an error has occurred when sending a request for authentication on the Server Single Sign-On PSC - null

  type of status report

  An error occurred when sending a request for authentication on the Server Single Sign-On PSC - null

  Description the request sent by the client is syntactically incorrect.

  
  

  I am confident that the two symptoms are related, as we have other vCenters based on Windows running 6.0 Update 1 when it is not a problem.  However, I was at a loss to identify the cause to find all the logs that are correlated with the web interface of the PSC errors or failed authentications in the CROWD.

  
  

  Would appreciate advice or guidance on how to solve this problem.  Without being able to connect to the CROWD, we are unable to troubleshoot SSL certificate I described above.  Thank you very much in advance!
  

  I figured out the problem and documented the findings in my blog here: Troubleshooting expired certificates with vSphere PSC 6 | Virtually understood

• I just purchased Illustrator CC and when I download it, it says trial has expired and does not activate my product.

  I just purchased Illustrator CC and when I download it, it says trial expired and by clicking on the license of this product, it is said that it does not recognize my AdobeID subscription and will not activate my product.

  Hello Andrea,

  Please see the documents below: -.

  Solve the common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages

  Creative cloud do not forget and do not store my credentials.

• Continuously their credentials for proxy server

  I have multiple LAN users who try to use Adobe CC applications.  All access to the internet is a proxy server that is configured by using WPAD.  Whenever a user starts an application Adobe CC they get their credentials to the proxy server, but nothing works.  We either make their credentials repeatedly, or you see a message saying that either the subscription has expired (he didn't) or that the computer is not connected to the internet (this is the case, but through a proxy).  Everyone has CC applications working through a proxy server?

  Sure.

  Please contact the customer service

• confirm the credentials through SOAP

  Hello!

  I want to check if certain identifying information given to a vCenter are correct, through a simple call to the API.

  What are the steps to do this? It works with a single SOAP call to retrieve the ServiceContext for example?

  Kind regards

  Joerg

  You must call RetrieveServiceContent, then you can call Login.  If the credentials are incorrect, you will get an error of invalid connection.  If you can then get the SessionManager and call SessionIsActive on the current session if you want to validate if a login through cookies session is still valid (if you were say store and reconnect to the VIM instance at a later period).

  Once you are connected, the session cookie id is the real "credential" used for all communications of SOAP.  If you do not send this cookie, then you won't be "connected".  You can end the session with the logout or to kill him through the vSphere UI (it will eventually expire as well).

  Take a look at the Onyx project: http://labs.vmware.com/flings/onyx.  It provides a way to capture SDK calls, you can use it to make the soap envelopes by running through the client vsphere or script first.

• Reader expansion license expired!

  Hello

  I used the trial version of Adobe LiveCycle ES2 and a few days back my LiveCycle Reader Extension of license has expired. Now extended functionality of reader has stopped working for all the updated files the precedents. However my LC ES2 is still present.

  Now my question is:

  • Where should I get the paid license for Reader Extension?
  • Should I buy LC ES2 too before using Reader extended license?

  I am a developer and LC ES2 too expensive. I'm not going to use it for my part. Are there not any developer for this version?

  
  Thank you.

  -

  Afonso

  I will add to Paul's response.

  You have three choices:

  (1) look to purchase the software, as Paul suggests

  (2) use the Reader Extensions functionality that exists within Acrobat X (or an earlier version) Pro.  This allows the functionality of basic form Fill-in/registration, but it is subject to the limitations of the license for the number of users.

  (3) charge a retrial of Reader Extensions of the credentials of the test page http://www.adobe.com/devnet/livecycle/trial.html and add this update of credentials to your server.  This will allow the feature for a few months.

• Expired LCBA200 ordinary ReaderExtensions

  Hi, I have just t hought I'll know someone the Reader Extensions file in the course of the students files are expired. Is there anywhere to get the files from being updated?

  You can download an updated version of the expansion drive of credentials here:

  http://www.Adobe.com/devnet/LiveCycle/?view=downloads

  Concerning

  Steve

• Check for Expiration at the audit Cert

  Friends,
  
  Everything works great and the credentials mapping works fine, but now
  I need to add one more step to my not to check the certificate expired (SMART card, CAC).
  
  I need basically add features as soon as the user selects the digital cert present themselves, it will
  check for the final cert user date and alarms and stop them.
  
  The following works fine at the first record in the time when they first enter our system.
  If (! cert.getNotAfter () .after (new Date())) {}
  DT = cert.getNotAfter (m:System.NET.SocketAddress.ToString ());
  DN = cert.getSubjectDN () .getName ();
  out.println ("< table >");
  out.println ("your CAC card has expired.");
  
  I don't know I guess that creating a step to something like above.
  
  Thanks in advance for your time.
  
  KA

  The customer / authentication SSL server between the browser / web server should fail if the user certificate is expired. If you have Checking revocation enabled on your web server and the web server can track Point of Distribution CRL in the certificate of the user and then authentication will fail if the user certificate is revoked. All this happens before, is still involved.

  Thank you
  Ryan

• How to unlock my iphone 5, because my contract has expired?

  How to unlock my iphone5 because my contract has expired? Thank you.

  Hey nebo700,

  Thanks for posting your question in the Community Support from Apple! I understand you want to unlock your iPhone for use with another carrier. I can certainly understand wanting to be able to use the carrier of your choice, and I am happy to share information.

  You will be able to find all the information on how to unlock your iPhone here: How to unlock your iPhone

  See you soon!