critical error / has no process indexing of files / hard drive C:\ is unreadable.

Similar Questions

• Error: An unexpected error has occurred processing your request. (Was: Adobe Muse)

  I get the following error message when you try to start Muse. It asks me to connect and the following message is displayed "an unexpected error has occurred. An unexpected error has occurred processing your request. Please try again later. "I have a full subscription. It has worked well for the last few months. This question took place today, but has persissted.

  Hello

  We managed to get it solved.

  He should be running now.

  My apologies for the inconvenience caused.

  Kind regards

  Sachin

• Move to the new computer, get "an error has occurred during playback of files or write files to a disk." The disc

  • I tried to move my catalog and PE6 install to a new computer.  This is on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64-bit) machine.  I always kept my photo on an external hard drive files.  My library is 50 GB, 10,000 files.  Here's what I did.
    • Copied the original PE6 installation file on the Toshiba.  Installed but not activate it.
    • Copied my catalog folder to the location of the Windows 7.
    • Plug the external drive into the Toshiba.  So makes that same letter drive as a front.
    • Fired up to PE6 on Toshiba.  Seemed fine in the Organizer.  Everything seemed to be there, but I didn't try to make any changes at this time there.
    • PE6 disabled on the Dell.  Enabled on the Toshiba.
  • Then I realized that it is not fair.  I can edit the keywords and the stars rating on photos, but not the dates, legends or notes.  I get "an error has occurred during playback of files or write files to a disk." The drive is may be full, or there may be problems with the source media. »
  • Only a fraction of the external drive is in use.
  • I can access the files on the external hard drive with another application (Windows Photo Viewer).
  • I tried the reconnect All missing files.  Somewhat ambiguous, she said "There are no files to reconnect."
  • In the properties in the organizer for each photo are the appropriate file names and paths.  Folder view works fine in the Organizer.
  • I can put new files in the directories of the same external drive, import them into PE6, then change them normally.

  What is the best way to get Organizer connected correctly to my files?  I guess I could import all photos on the new machine, but I guess I'd lose some of my metadata.  So it's out of the question.

  Thank you

  Bill

  Well, the recommended method for moving the catalog is to use organizer of the PSE6 on your old computer to do a full backup on your DHM.  (Which backs up the catalog and media files).  Then, on your new computer, open the Organizer PSE6 and restore from this backup.

  Your method seems logical, but...

  Ken

• 'operating system error' at startup after installing a new hard drive

  Original title: sys.error of operation

  I replaced my hard drive on another pc. power computer peripheral ireconizes but then goes to black screen saying operating system error.  What should I do?

  Install an operating system on the new drive.

  All WinXP installation CD legitimate are bootable and access the capability of deleting, creating and formatting partitions.

  Simply boot from the Windows XP installation CD.  You will be offered the possibility to delete, create, and format partitions as part of the installation process. (You may need to rearrange the order of the boot devices in the PC BIOS to boot from the CD.)

  How TO install Windows XP
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;316941

  http://www.michaelstevenstech.com/cleanxpinstall.html

  http://www.webtree.ca/WindowsXP/CLEAN_INSTALL.htm

• Call to access the computer, recently received a phone call from someone saying that my computer has a virus online damage the hard drive.

  Recently received a phone call from a person saying that my computer has a virus online damage the hard drive.  They said that my computer license of Microsoft and utilimately ID wanted remote access to my computer via maintenance PC (pc22.com) to correct it.  Is this a new type of fraud that goes around?

  It is not a new type of fraud, but it IS a scam.  MS does not give that kind of information, and they do not call users.

• My motherboard has exploded and I have the hard drive. How can I copy the address book for a new installation on a new computer from the old hard drive?

  I have the old hard drive in a USB enclosure and connected to the computer again. I have installed firefox and you need to have the address book (critical) copied and inserted information from address book on the new computer. I hope that there is a file I can replace easily?

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  https://support.mozillamessaging.com/.../home
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• Satellite M30: Unknow Hard Error - could this be a problem of hard drive?

  I got my Satellite M30 for 2 years now and it never gave me any problems, until a few weeks ago. The problem started shortly after I put Windows to SP2, when I played a game it would stick for a minute or two, and then continue on as usual, the problem slowly got worse and started blue screening with "Unknown hard error" and sometimes strange balloon in the lower right corner saying unknown hardware error and then freeze it. It also took a long time to start and generally do nothing.

  Assumed it was a problem when I've upgraded to SP2, so I decided to reinstall Windows and start over again, update the BIOS while I was home.

  Once this is done it seemed fine for an hour or two, but then tried to install a game and of course, the good old blue screen appears and the whole problem starts again.

  I took it to a repair shop and explain the problem and I had re-installed Windows nothing helped, and I suspected that it may be a hardware failure, I left it with them, and 2 days later I get a call saying its all fixed and ready to be picked up, I asked what was wrong with it and they said that they re-installed Windows and sound now works fine (i.e. what I their) I said, I had made and n t worked!). I picked up (and got charged £40 to have done what I had already done). I got it home and everything seemed ok... for a few hours, then blue screens seemed to tell me any physical dumping of beginning and the usual stuff.

  I think it might be a drive problem hard, like when I tried to install a game on it at night last light CD and HARD flash drive, one for about 15 seconds, then the other for a short time, data copied from one to the other, but then the HARD drive light stayed on, and I could hear the HARD disk as if it were sticky , after about a minute of this blue and close short-listed and took some time to turn back. If I leave a couple of hours and it starts fine until the next time.

  So, after my long description on my problem, I have 2 questions,

  1. could I be right in thinking that these problems are associated with hard drive?
  2. If I'm right, is easy to replace on the M30 HARD drive and where I would buy a new?

  Thanks for your time and help,

  Kenny.

  Hello

  The blue screen appears only if you play games?

  But I agree with you. In my opinion, there would really be a hardware malfunction.
  The question is - it s a HARD drive or something different?
  Hmmm. I think that the problem is not related to the disc HARD but maybe overheating?
  According to the publication, sometimes when you play games. The game is a high performance application. All devices running with maximum performance and produce heat.

  I m not 100% sure, but maybe the high temperature has a bad influence on the system and therefore the BSOD happens.
  You suggested that the laptop run properly for about 2 years. Maybe fans can cool properly because of the dust and debris. Two years is a long time if you have not cleaned the cooling modules and fans.

• Satellite Pro A210 - error recovery after a new installation of HARD drive

  Hello

  I have a satellite pro 210 (bios v1.6) has died the HARD drive.

  I bought a new WD Scorpio Blue 250 GB HARD drive and ran the reinstall drive (I've done exactly this for a friends Equium a month or so back and all worked flawlessy!)

  Everything worked fine until the first re-boot, went through the usual stuff:
  Please wait a moment while windows starts for the first time
  Then a windows background, spinning slider with waiting message please, much HDD activity
  Then the sudden error:
  "Installation of Windows could not configure windows to run on a hardware on this computer."

  Does anyone have ideas, what it might be?
  A google search suggests the sata bios settings, but I do not see in the configuration of the bios page.
  In my view, there is a new bios v2 by download - would this help?
  If so how can I install it when the computer does not start vista? Or any other suggestions?

  Thanks for reading.

  Cheers, Stephen

  Hello

  The SATA driver is not necessary if you use the Toshiba Recovery disk because the image on the recovery disk contains the SATA driver.
  So there must be other reason for it.

  In your case, I recommend setting the BIOS settings by default and start over once the recovery procedure.
  Maybe something went wrong during the configuration of the OS if second installation is worth a try

• Satellite A200-1AE (PSAECE) Vista has detected a problem with the HARD drive

  I have problem with my mass storage device, or else I think it's this feature that I get this error message when I start my computer [(photo de Massage de l'erreur) | http://img513.imageshack.us/img513/1059/errorxd5.jpg] and I think it has something to do with that [(Image in Link) | http://img132.imageshack.us/img132/2703/divicemanagerax9.jpg]

  I don't know which driver download for this problem.
  If anyone can help it will be much appreciated. I am running windows Vista x 86.

  Hope helped photos

  Hello

  The first error message said nothing; He only says that something is wrong on the HARD drive.
  Why you n t pres the button Don t ask me once again this problem?
  It seems the message again using this option?

  On the second picture, I see that your Intel Matrix Storage Manager has not been installed on your Vista 64 bit OS.

  On the European driver Toshiba page, you will find the 64 bit Vista drivers. Please download the Intel Robson Package from this site and install it. Robson package includes Intel Matrix Storage Management Utility for the management of your local storage space.

  Check it!

• has had to replace the internal hard drive! need help!

  Hi, laptop HP HDX - 1056CA

  My internal hard drive is totally dead after 2 years (warranty expired), and I had to replace it. I dropped in the new hard drive. But I don't know what are my next steps

  Do I really need to refer to the recovery discs - and they will work on a new hard drive? -I don't mind send away if that's what is needed, but I can't recover my old data, I hope that I can just download the drivers and leave with the machine... (also I go to work on Monday for 2 weeks at an oil rig, records will not be here in time and I won't be able to stay in touch with my friends and my family like the network is very limited as to what we can access if the computers in the Organization).

  can I use my desk top of the page to download and burn the recovery discs? can someone link me to the right place (HP HDX16 - 1056CA).

  My other question is that I have upgraded to windows 7 from Vista, when I ask to do recovery disks I have ask for the vista version and upgrade again (will be microsoft / the computer accepts the only time only upgrading key again?)  or should I go for the version of windows 7?  I need to re install the windows original vista and then switch again to win7, being that the computer has been configured for vista before the upgrade.

  Thank you very much for any help or insight people can give me! I really appreciate it!

  Hi all

  I had a BBQ and three guests oil and gas software and refused to feed them until thelaptop has been fixed.

  They threw the XP disc across the room and were able to start the player directly at the exit of the disk upgrade of windows 7 using the Custom Installation option.

  I'm afraid I can't give you more information, others that there is no need to first load the XP or the use of the USB box with the zip file in in order to recognize that the new installation drive.

  Thanks everyone for all the help offered here here.

• "No disc" error when you try to access external hard drive...

  I have a USB key that I use to record music files. Whenever I try to open it, but it was giving me an error that says:
  "Windows - no disk. . There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR21.
  DR numbers change of 5, 17, 19 and 21 now. I tried to change the drive letter from the center of disk management, but who doesn't. I also uninstalled the drive and then re-installed, also without success. I have not tried reformatting the drive yet, mainly because I don't have the ability to transfer files via. I am running Windows XP.

  Any help would be appreciated!

  Hello

  1. What is the brand and model of the external drive?

  2. do you update SP3 installed on the XP machine?

  3. have you made changes on the computer recently?

  Method 1.

  Step 1.

  Plug the USB device into another computer and check if the device works on this computer.

  Step 2.

  Plug another USB device and check if this device works on this computer.

  Step 3.

  You can connect the HDD on another USB port and check.

  Method 2.

  I suggest you follow the steps in this article.

  A computer that is running Windows XP cannot detect a USB flash drive, an iPod from Apple or an external hard drive: http://support.microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  My drive does not appear in Windows Explorer: http://support.Microsoft.com/kb/330140

  Refer.

  Advanced troubleshooting tips for General USB in Windows XP problems: http://support.microsoft.com/kb/310575

  Why my computer doesn't detect my new USB device when I run Windows XP: http://support.microsoft.com/kb/314634

  "There is no disk in the drive. Insert a disk in drive \Device\hard disk\Dr1"Error Message When you start your computer: http://support.microsoft.com/kb/330137

  I hope this helps.

• "Access denied" error XP trying to access an external hard drive used on Windows 7

  Hello

  I used my external hard drive as usual on my XP machine for months, but yesterday I had to use it on another computer running Windows 7. Windows 7 asked something like "do you want to enable access to this hard drive?" and I clicked Yes thinking that it wouldn't cause any problems (showed a green bar that drains into the upper part of the window), but now that I'm trying to use it again on my XP machine I get an access denied error such as permissions changed. I just installed service pack 3, but which did not help.

  Help it would be greatly appreciated the fixing, I'm happy to just continue to use the external drive on my XP machine - use it on other Windows 7 machine was just one time.

  Thank you!

  Simon

  This should help: How is ownership of a file or a folder in Windows XP .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• Error message with (PX1394E - 3 50) external HARD drive

  I have a 500 GB external hard drive, Code: PX1394E - 3 50.

  I work perfectly until now that I have a bug in Windows XP that says "has exceeded the capacity of the hub port", although blue light turns on the hard drive and leave the mistake of putting the USB hard drive to the computer. I've tried different USB ports and well past, I tested these USB ports with other devices and whether they work, the USB ports are 2.0 and Windows XP SP3.

  HM, I recommend you to send the drive to an authorized service provider because it sounds like a hardware problem. Maybe the controller in the external hard drive has certain shortcomings.

  If you need to find an ASP then go here-> http://eu.computers.toshiba-europe.com/ and goto-> Support downloads &->-> repairs & maintenance of the Web site-> to find an authorized service provider

  Welcome them

• Error 0 x 80070005 backup on external hard drive

  I tried several times to make a backup of my laptop on a hard drive external, a WD 1 TB hard drive and continue to receive the error code: 0x80070005. I have not found this error code in the Knowelege Base. What causes this error & what can be done to eliminate this error?

  Hello

  Try the following steps

  1. start type Services and press Enter or Win Key + R to open run and type services.msc

  2 - find the block level backup engine Service and double click

  3 - go to the log and click this account

  4 - Click Browse , type your user name and then click on 'Ok '.

  5 - enter your password in both fields and click 'Ok '.

  Reboot your PC and try backup

  Hope this helps.