Cruzer slice 16 gb flash drive

Similar Questions

• What is the individual metal ring sticking out the top of my new Cruzer 16 Gb usb flash drive?

  A quick question: what is the little metal ring sticking out the top of the page top of my new Cruzer 16 GB "micro" flash?  What can it be used?

  Thanks for your advice.

  -G. Roberts 'Gary' Stevenson

  Hi Gary,.

  Yes, is to make a loop to put on a keychain.

  Does not exist on the memoirs, a tab for protection against Scripture.

  Link: http://www.sandisk.com/products/usb/drives/cruzer-fit/

  Enjoy!

  Sincerely, Alfred.                                                                      (Google translated)

• p6710f, crashes at startup when installing 2 Cruzer of Sandisk USB flash drives

  Hello

  Question: My HP p6710f desktop computer crashes at startup when 2 Sandisk Cruzer USB drive (8 GB/FAT32, a 16 GB/FAT32) is installed in a hub Targus USB2 multiport (connected to the back USB port of p6710f).

  With USB flash drives installed, from a market boot: Boot past the BIOS (blue) screens, then 'underline' cursor blinks just on the black screen and hangs.  It does not start a Win7 from the hard drive.

  With USB flash drives installed, from a bunch of market: If in the (blue) BIOS screen, I hit the ESC and select the hard disk device (which is the top of the "boot device") then boot proceeds normally and boots Win7 from the hard drive.

  If I do the trunk with the key removed USB, the boot process proceeds normally and starts Win7 disk.

  I have flashed to the latest ROM system from the support page of p6710f.  Who really seemed to solve the problem for a while, but the hook finally reappeared.

  I copied all the data on USB flash drives, formatted their 'rapid' and copied all the data back.  No joy.

  Here is a link to the Sandisk Cruzers.  I deleted all the files on U3/etc. out of them, I want all of the space available on them for auxiliary data storage, I can't boot from them:

  SanDisk Cruzer

  Thanks for any help,

  -Gary K

  Hello

  Probably of the order of startup in the BIOS has been set to use the USB is/is the first choice. Please, move them down. Here's how:

  http://support.HP.com/us-en/document/c00364979

  Kind regards.

• Cruzer Force USB Flash drive.

  I have a Force Cruzer 32 GB USB flash drive. I installed it in a mac mini ok and safe mode and regular mode works in the mini mac ok but when I put it in a laptop or a PC desk top it works in normal mode. The secure vault does not open even when you type the correct password. It is supposed to work in both PC and Apple Mac. I don't see much interest to have it if it isn't.

  SanDisk don't seem to not know or even respond to my problem in a direct way.

  Thaks Alan Beasley

  Hi Alan,

  Dear member of the community of SanDisk, welcome.

  Don't forget that there are two software, for Windows and Mac.

  Compatibility:
  Software SanDisk SecureAccess is supported by Windows XP, Windows Vista, Windows 7, Windows 8 and Mac OS 10.5 and more.

  Use with a Mac requires to download other software.

  And SanDisk SecureAccess software, you must install the USB key.

  The latest version of SanDiskSecureAccessV2, you can download (for free) here:

  http://KB.SanDisk.com/app/answers/detail/A_ID/2399
           http://KB.SanDisk.com/app/answers/detail/A_ID/2413

  1-     Download the USB flash drive, at SanDiskSecureAccessV2_win, (if you have a PC).

  1 attention: If you are thus: SanDiskSecureAccessV2_win.exe, go Tools/Folder Options/tab/view/and check the box: Hide file extensions, moreover, you notice, which are also branded the choice: Hide protected files and do not show the hidden files and folders.

  2-     Then, you install the program, password, etc.. And you will have two files:
  2.1-  SanDiskSecureAccessV2_win, (the application).
  2.2-  SanDiskSecureAccess arch, (which is the folder that contains the encrypted files).
  2.3-  If you lose or delete to SanDiskSecureAccessV2_win (2.1), there is no problem, as download others and ready.
  2.4- But if you lose or delete a vault SanDiskSecureAccess (2.2), missed all of the content.
  2.5-  If you change the name, the application (2.1).
  2.6- Do not you can change the name, the folder/Vault (2.2), because the name is generated by the application (2.1), and if change you it, the app opens and will generate a new Vault.
  2.7-  If you can move, too, demand (2.1), an entire folder.
  2.8- You can not move the folder/Vault (2.2). you should leave it to the root of the USB drive, because that is where the course 'find' the application (2.1).

  2.9-  There is an option (in the My Vault toolbar), which generates a backup (for SandiskSecureAccess Vault), on your PC.

  Beware 2: Always make backup content, copy the vault, clone the USB flash drive, etc., then save everything in a "safe place."

  Enjoy!

  Sincerely, Alfred.                                                             (Google translation)

  ----------------------

  Hi Alan,

  Dear member of the Comunidad SanDisk, bienvenido.

  Remember that hay software back, uno para PC y uno para Mac.

  Compatibility:

  SanDisk SecureAccess softwarees're soportado por Windows XP, Windows Vista, Windows 7, Windows 8 and Mac OS 10.5 and higher.

  El uso in software Mac download otro requiere una.

  SanDisk software SecureAccess, debe ser wont Y the UFD-en.

  Esta ultima version, of SanDiskSecureAccessV2, that you can download (free) of aca:

  http://KB.SanDisk.com/app/answers/detail/A_ID/2399
           http://KB.SanDisk.com/app/answers/detail/A_ID/2413

  1-     DOWNLOAD of en flash drive USB, a SanDiskSecureAccessV2_win, (if you have PC).

  Cuidado 1: If you figura asi: SanDiskSecureAccessV2_win.exe, ir a tools/options of tildar vidéoconférence, pestana, worm, y: extenciones paso archivo ocultar, you look as tambien esten tildadas las options: ocultar archivos protegidos del sistema, no show y archivos carpetas ocultas.

  2-     Entonces, instalas el programa, contrasena, etc.. Y have back archivos:
  2.1-  SanDiskSecureAccessV2_win, (which are the application).
  2.2-  SanDiskSecureAccess arch, (which are the vidéoconférence that contains los archivos encriptados).
  2.3-  If pierdes o borras, a SanDiskSecureAccessV2_win (2.1), no hay problema, pues descargas otro, y ready.
  2.4- Pero if pierdes borras o a SanDiskSecureAccess (2.2) vault, perdiste todo el contenido.
  2.5-  If the change number el puedes, has application (2.1).
  2.6- No puedes el change number, to the vidéoconférence/Vault (2.2), porque el number, are generated per application (2.1), if lo cambias, the application (2.1), no lo will an open, there go a vault building otro nuevo.
  2.7-  Change of lugar, tambien puedes, if a application (2.1), a met of any.
  2.8- No you can change to lugar, has the vidéoconférence/Vault (2.2). Debes dejarla en the raiz of USB flash memory, because of ahi, donde va an ir 'a buscar', the application (2.1).

  2.9-  Hay una opcion (en the bar of tools of my Vault), UN backup genres (para SanDiskSecureAccess Vault), a managed PC.

  Cuidado 2: Hacer siempre, save del contenido, copy el Vault, clonar to USB flash memory, etc. y save todo, en "lugar seguro.

  ¡Disfruta!

  Saludos, Alfred.

• Nighthawk R8500, USB 3.0 Flash drive not recognized USB 3.0 Port, Port of only 2.0

  My Nighthawk R8500 router with the latest firmware, V1.0.2.54_1.0.56, does not recognize my SanDisk Ultra Fit 128 GB USB 3.0 Flash drive when it is connected to the router USB 3.0 Port. The Ultra Fit is formatted in FAT32 and works fine when plugged into USB Port 2.0 router or my laptop.

  At first, I thought maybe USB 3.0 Port on my router wasn't working at all, but it recognizes my SanDisk 16 GB Cruzer USB 2.0 Flash Drive that is also formatted FAT 32. Unfortunately both my laptop have USB 2.0 Ports, so I don't know if the problem is with the router or the Ultra Fit Flash Drive. Everyone knows about this problem of their Flash 3.0 player is not recognized in USB 3.0 Port their router, especially with a SanDisk Ultra Fit? This problem can be resolved through firmware? I'd really like to take full advantage of the speed of USB 3.0 as I like to share files through my router via ReadyShare and ReadyCloud.

  Thanks in advance for any help, Carlos

  Technical support with me. Installation of a updated firmware, V1.0.2.64_1.0.62, which became available shortly after my post, solved the problem. -Carlos

• Deleting files from the Flash drive

  I have a Sandisk Cruzer Edge 16 GB Flash Drive.  I use it with two computers, an iMac and a Macbook Air, both using OS X 10.8.2.  Recently, I loaded about 10 GB of files on it.  I have now deleted these files.  However, Finder always shows the Flash drive as carrying 10.8 GB of files and having only 5,2 GB of available.  When I try to record a 10 GB file on the Flash drive, I get a message saying that there is not enough available space.

  How can I delete uploaded files from the Flash drive so that I can reuse the whole 16 GB?

  I don't use a Mac, so I'm going off the coast of the memory of what I read here before, but I think you need to empty your trash, while the disc is still connected to your Mac.

• ESXi flash drive failed, how to recover files from her previous settings?

  I was running ESXi 5.0 off a Sandisk Cruzer 1 GB USB flash drive but the system started acting weird (slow), so I rebooted it, when he came to the server could not boot from it so, it seems, some of the files that it contains has been corrupted? Before the reboot, I was able to use the virtual machines on the server for file corruption must not have been that bad. I'll reinstall ESXi on an another USB.

  To save me the pain of the reconfiguration of the network hardware and virtual in ESXi (do not save these settings), what directory and the files would I need to copy on to get these previous settings applied to the reinstall ESXi?

  To access these files, I have to do something special to get this old USB under Windows or Linux? These operating systems will recognize the file system on it? If not, how can I get access to what is on it? Thanks for any help!

  Data on the USB ESXi drive partitions are partitions FAT, so you are able to access it from Windows or Linux. In Windows you must assign the drive letters for the partitions by using the disk management tool.

  Look for the two partitions of 250MB in size and a file named state.tgz on them. Choose the most recent two copies and copy it to the newly installed USB drive. After the initial installation, one of the two 250 MB on that drive partitions should contain files - replace the file state.tgz with the copy of your old installation.

  -Andreas

• SanDisk Cruzer Slice USB Flash Drive how to configure

  How to re set up a san disk 16 gb USB Flash drive (Cruzer Slice)

  Thanks a lot, it seems to have sorted itself and works ok once again thanks

• System does not recognize new San Disk Cruzer 16 GB flash drive

  I am running XP Pro SP2 on an old ThinkPad from IBM. When I inserted the SanDisk Cruzer flash disk, a window popped up saying that Windows could not find an installer of Volume. When I tried to open 'Add new hardware' on the Control Panel, nothing happened. Other flash SanDisk Cruzer readers (2,4 & 8 GB) anf PNY flash drives work very well. The SanDisk 16 GB works very well on my laptop HP running Windows 7 Pro. Suggestions.

  USB flash drive support page

  The latest U3 Launchpad from December 2009 is version 1.6.3.9.  This version is compatible with Windows 7.   It has been gradually.

  NOTE: U3 programs are no longer available for download from SanDisk.

  You need to contact technical support.  There is a live chat on the right menu option

  http://KB.SanDisk.com/app/answers/detail/A_ID/3682/~/U3-Launchpad-update-for-Windows-7

• Problem with 32 GB cruzer flash drive

  Hi all

  I recently created a ubuntu USB - HDD with persistence on a 32 GB cruzer USB flash drive.

  The installation goes very well, the operating system started, and he was save the changes.  I proceeded to install all the recommended updates as well as a lot of packages I wanted.  I got a warning that the aircraft was running out of space.

  It has been partitioned with 2 GB (FAT32) for the OS and the remaining 30 for persistence (ETX2) (where all data and changes are written in)

  I used Gparted to remove the persistent partition so I could extend the main operating system partition.  Once I did, I've recreated the persistent partition.  Who had done the flash disk unbootable.  No problem, I thought, I could start all over again.

  However, I was wrong.  I'm unable to format the drive now at all.  I get an error message saying it was write protected.  I tried vista windows, format win7 and Linux to try.  Ive used the tool of HP and Gparted or Fdisk disk under linux.  Same dd on linux does not work.

  Is there a way I can force the write protection off?  Or use a brute force tool format?

  There is no hardware on the device switch entry switch protect on or off.  I'm afraid I might have permanently damaged the drive.  Any help?

  Thank you

  "Any help?

  There is no solution for this problem.  Return it to SanDisk for a replacement.

  http://KB.SanDisk.com/app/answers/detail/A_ID/5232/~/return-material-authorization-(ARM) - process

• strange problem with two Cruzer 32 GB flash drives on XP Pro

  I have two Cruzer 32 GB discs that will not work on a particular PC running XP Pro SP3.

  The readers work in other PC running XP Pro and PC running Windows 7.

  Now, until someone says, "it's obviously a problem with the PC" I have to say that USB Flash drives other works very well in this PC manufacturers, as does my Seagate FreeAgent Go drive (so it is not a question of power).

  Flash only readers who present a problem are the readers of Sandisk.

  When I insert the Cruzer it flashes slowly then after maybe 20 seconds start blinking quickly and continues to do so as long as she remains inserted in the USB. There is no indication on the screen it was inserted - nothing ofering to the media browser, files, etc.

  The drive appears in my computer as drive F removavble, but no file or folder is visible.

  When I go to administrative tools > computer management > disk management, disk is NOT visible, it is not visible as a removable drive.

  In Device Manager it appears as SanDisk Cruzer USB one, using a device driver Microsoft date 01/07/2001.

  I tried to uninstall this device, removing the Cruzer then turn the PC, but when I plug it in there new detects new hardware - Sandisk Cruzer and drive hard, but then says that it can not work properly and invites me to restart the PC. Subsequently, he then returned to the symptoms described above.

  The TWO Sandisk Cruzer 32 GB disks with the same problem.

  Someone at - it any other ideas?

  Thanks pechter!

  Kies was the problem.

  I followed the instructions in this thread http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/sandisk-cruzer-blade-problem-troubleshooti... and it cures the problem.

  I must point out that it has not affected any other brand of flash drive I've tried, the incompatibility seems to be only between Sandisk Cruzer and Kies, leads me to conclude that this is a problem of Sandisk.

• SanDisk Cruzer 4 GB Flash Drive deleted files

  I deleted some files on my SanDisk Cruzer 4 GB Flash Drive on a laptop computer that I used to have, now I use a different laptop and I was wondering if there is any way I can get the files I deleted back?

  Thank you!

  Sure.  Use an application of recovery such as PhotoRec, totally free; to download, use and to recover.  A lot of other 'free' support during the final phase.

  http://www.CGSecurity.org/wiki/PhotoRec_Step_By_Step

• USB Cruzer 128 GB Flash drive

  I bought the drive Flash USB Cruzer 128 GB in July 2013.  It seems that it is a product of USB 2.0.

  Today, I plugged the Cruzer USB port of my laptop HP Probook 4540 s (Win7 SP1) 3.0 and was copy several files for a total of approximately 100 GB.

  The copy took about six hours.  File transfer speed is very slow.

  How to get the best speed of file copy please?

  "It's the"rapid withdrawal"by default.

  The default value is not intended for readers of 128 GB with 100 GB downloads.

  "As for format NTFS, I read probably somewhere years pendrives work faster if they are NTFS"

  You certainly know that not everything you read on the Internet is correct.  Think about it, if this were true you don't think that flash drive manufacturers would manufacturer their drives with him so they would run faster?  Readers begin as the super floppy format FAT32 for some reason.  No MBR, no table partition, no record of the IO, any backup fat.

  There are 3 ways to format a NTFS-formatted flash drive; Quick format, full-sized, cnvrt format.  I saw where the full format is faster than a cnvrt format.  If faster than a quick format, I don't know, but a cnvrt doesn't take long.

• How can I get a driver for the glide cruzer sandisk flash drive

  How can I get a driver for sandisk cruzer 4 GB flash drive glide? I use win7 32 bit. I have a yellow flag in Device Manager

  Other usb devices work on this PC?

  Is it the same if you try all usb ports?

  You can test the device on another PC?

• Cruzer USB flash drive

  I have the hp Pavilion p6877 pc, where EHF at the edge of the tower can I insert USB Cruzer flash drive? where can I find a diagram of the front of the Tower?

  Thank you, I see it slides down, I was trying to open as a flap