CS4 crash when using the Vanishing Point

Similar Questions

• Windows Explorer Crash when using the control panel

  This is the type of an interesting question that happens to me only sporadically and usually only to a cold start.

  When I shut down the computer completely for cleaning or install something, when restarting, open the Control Panel causes Windows Explorer to crash (note that this is not Internet Explorer).
  
  It restarts immediately, but I lost some of the icons in the taskbar - especially the icon Sound Max.

  If I do a reboot it comes back and I can use the Control Panel normally. Tried to remove items from the start menu, as obviously something is in conflict when it starts but it is like shooting in the dark to find the good start. I even reinstalled W7 with a lot of attention, but it happens once again from time to time. I ran sfc/scannow several times and all is well.

  As long as I don't do a cold reboot it will work very well for weeks without a hitch. (Please no comments about just don't).

  Someone else has a similar problem? My specs are lower and it has not changed when I updated to the latest version of the bios so I suspect something on W7, and I strongly suspect the driver SoundMax which is in fact very old for W7X64.

  All updates are underway, including the latest which was supposed to increase stability for W7 X 64. I had added this update 4/28. An accident 29/4 good. I uninstalled the update and re-installed directly from the microsoft link. Sometimes it works, but not in this case.

  I studied all the information mentioned in the error codes and most of the time, it led to speculation of different people to different causes. I've read that it could be a conflict with the driver Sound Max, this is why I suspect as well that it might involve the Nvidia GPU driver. Changed the GPU driver and no joy. Whenever I have ask W7 to check a solution that is not found. So, it happens once in a while, but there is nothing wrong? At least Microsoft knows something is happening--evidence of the update.

  ASUS P6T Deluxe V2 LGA 1366-Bios 1003 - Intel I7 920 - EVGA GF GTX 260 SC - 12 Gig Corsair DDR3 1333 Ram - Gig 2 300, Velociraptor, Raid 0 1 Seagate 500 Gig HD - Lite on DVD Burner - floppy drive and external-180 card-Coolermaster V8 Avermedia HDTV card reader - Thermaltake Toughpower 850 w. modular fan P.S. - Antec 1200 case - Reobus 6 - 5 controller 120 fan Thermaltake Fans - 1,200 cases GPU Driver 196,21 Windows 7 X 64

  Hello

  Make sure that Windows Update is turned on and install the update KB980408 (http://support.microsoft.com/kb/980408) - April 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 is available .

  Issues that this update fixes this update improves the stability and reliability of Windows 7 and Windows Server 2008 R2 in various scenarios. This update addresses the following issues:

  • Windows Explorer crashes and then restarts when you access a third-party Control Panel item.

  This update solves the problem?

  If this isn't the case, please download this reg from my SkyDrive file:
  http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg

  and double click on the file to import.

  When Explorer crashes, Windows Error Reporting Service creates a dmp under C:\Localdumps . Please download the file to your public Skydrive folder and post the link here. I take to the dump, maybe I can see the cause.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Satellite P10 crashes when using the USB port

  Hi all

  I used my Toshiba 1 year without problem. Recently, I have a problem with my USB port. As sson as I have insert any USB device. The system hangs / crashes(I have to swith it off using the power switch to reboot w/o the usb device).

  I have removed/uninstalled drivers and rebooted. The laptop recognizes the usb ports and charging drivers, but whenever I insert any USB device, the system freezes again.

  Any advice will be appreciated.

  Kind regards
  Richard

  Hello Richard

  It will be interesting to know what devices you connect to the USB ports and devices has own power supply.

  It's really not easy to say what is happening here. Perhaps some device needs a little longer to be recognized. Please let us know what devices you use.

• Still crashes when using the Adobe Dynamic Link to import the Bluray video.

  When I try to import the video again using either the Adobe Dynamic Link or opening and import as a timeline yet, still hangs during the "settings for transcoding to prepare."  I have Adobe Master Suite CS5 which was a download version.  I had this software for May 2011.  I was able to use the import of video in the past, but there seems to be a problem with even now.  The program has been corrupted? If I need to download it again to fix it, how can I do this?

  Thank you

  Joe Miller

  Other things to read...

  Reset preferences corrupt = press/HOLD Ctrl + Alt + Shift keys at the start of program

  And below, right click on the icon again and select run as administrator, which is NOT the same thing as running the computer with the administrator account, and which corrects several problems "weird"... To create a layer two DVD (or a BluRay?), you MUST still have to use the run as Administrator option

  .

  Run as Administrator http://forums.adobe.com/thread/771202

  .

  Odd of errors http://forums.adobe.com/thread/670174

  .

  Long file names or strange characters cause problems

  Read http://forums.adobe.com/thread/588273

  And #4 http://forums.adobe.com/thread/666558

  And this thread of Message http://forums.adobe.com/thread/665641

• Crash when using the tool pen

  I hope I copied and paste the right thing.

  Photoshop.exe version 16.0.1.168 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.

  Process ID: f34

  Start time: 01d10c834e91e8df

  Time of termination: 13

  Application path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Report ID:

  You can post to

  General discussion of Photoshop

  What did you do for troubleshooting so far?

  Restoration of preferences after checking all the presets custom like stocks, models, brushes etc. have been saved can be a good starting point:

  t http://blogs.Adobe.com/Crawlspace/2012/07/Photoshop-basic-troubleshooting-steps-to-fix-MOS - issues.html

• Excel crashing, freezing when using the spreadsheet

  Original title: Excel 2013 file size.

  Hello. I'm having a problem with Excel crashing, freezing when using the spreadsheet. I work on a PC with WINDOWS 7 SP1 64-bit, through a server that is running Microsoft SERVER 2013, WINDOWS 7 PRO 64 BIT SP1. We use 5 PC via all current server running the same version of operating system that use the spreadsheet and in most is used only by 3 PCs anywhere, anytime, even if EXCEL is not on the server, it is running locally on the PC.

  My guy TI tell me the spreadsheet while working on too big to 2 k! They keep asking us to reduce the size and to separate the workbook to solve the problem. Personally I don't believe a Word, we do not use formulas etc just cells with digital text and the alphabet.

  Now last year on the advice of our computer SCIENCE company, we have been advised to upgrade our server and our PC because terminals that they were getting their limit of operation which I accepted. These have been updates middle of last year.

  On this basis, I believe that society COMPUTER trying to throw dust on my eyes as I do not think that they provided the wrong material and are unwilling to admit it.

  Counsel on the question worksheet would be great I need to come back with some kind of evidence in support of my way of thinking.

  I hope that makes sense, I know a little but not professional!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• CS4 crashes when I send to print and pen tool loses the ability to maintain a multi striped line attributes.

  With the help of Illustrator CS4 (impossible to pass because the office that I contracted does not level) on a Mac under the Mavericks 10.9.5 (just upgraded to 10.6). CS4 crashes when I send to print (I was save as PDF and print only). In addition, the pen tool loses the ability to maintain a multi striped line attributes.

  For the second, deselect new Art has basic appearance in appearance (small triangle in the upper-right) Panel dialog box. With regard to the other you tried to delete and time the printer to your list of printers? In addition, since nothing sooner than CS6 has been tested with 10.9.x, the PDF method can be your only hope.

• Flash CS4: change of MovieClip 3D vanishing point

  Is it possible, using Flash CS4, to change the vanishing point (IE projectionCenter) of a MovieClip? Or can Flash CS4 only set the stage vanishing point? It seems when I change from inside a MovieClip that it changes at the global level, which is not what I want.

  I found I can use AS3 with PerspectiveProjection for change when running, but I don't see the affect in Flash CS4, that allows to make the incredibly heavy real animation.

  6 years later - I expexct you found a solution now.

  If not for somebody else, I had the same problem. Click the clip with the 3D scene transformation, and then look in the property inspector. Open the section drop-down menu called "3D Position and view" and then, you can set the Vanishing Point - and Yes, I mean the vanishing point, not the registration point or anything else. You can also set the Perspective Angle, impacting on the "strength" of the perspective effect.

  Check out this link by Mariko Ogawa for a more detailed description, where I learned how to do this.

  Exploring the new 3D features in Flash CS4 Professional | Adobe Developer Connection

• System crash when use underscore

  Hello.

  He seems to have a bug in the creation of TextLine when use the pointed out...

  Quick glance:

  for ()var iIndex:int = 0; iIndex < 10000; iIndex ++)

  {

       var strTest: String = « ' < flow: TextFlow paddingTop = "3" paddingLeft = "3" whiteSpaceCollapse = "preserve" xmlns:flow = "http://ns.adobe.com/textLayout/2008" > < flow: p > < textDecoration flow: duration = "highlight" > a < / flow: duration of > <: duration of flow > < / flow: duration > < / flow: p > < / flow: TextFlow > ' » ;

       var oTextFlow: TextFlow = TextFilter.importToFlow (strTest, TextFilter.TEXT_LAYOUT_FORMAT);

       var arTextLine: Array = new Array();

       var oTextLineHandler: function = function (oTextLine: TextLine): Sub {arTextLine.push (oTextLine) ;};

  TextLineFactory.createTextLinesFromTextFlow (oTextLineHandler, oTextFlow,

  new Rectangle (0, 0, 200, 200));

  }

  When you try this, PLANE crash. (Flex Builder 3).

  THS code is just one example of bug... I know its useless

  Its very strange that, if you do not create the TextFlow in the loop, it's ok...

  var strTest: String = « ' < flow: TextFlow paddingTop = "3" paddingLeft = "3" whiteSpaceCollapse = "preserve" xmlns:flow = "http://ns.adobe.com/textLayout/2008" > < flow: p > < textDecoration flow: duration = "highlight" > a < / flow: duration of > <: duration of flow > < / flow: duration > < / flow: p > < / flow: TextFlow > ' » ;

  var oTextFlow: TextFlow = TextFilter.importToFlow (strTest, TextFilter.TEXT_LAYOUT_FORMAT);

  for ()var iIndex:int = 0; iIndex < 10000; iIndex ++)

  {

       var arTextLine: Array = new Array();

       var oTextLineHandler: function = function (oTextLine: TextLine): Sub {arTextLine.push (oTextLine) ;};

  TextLineFactory.createTextLinesFromTextFlow (oTextLineHandler, oTextFlow,

  new Rectangle (0, 0, 200, 200));

  }

  What can I do? just wait for a beta version or is there a process to sync, I'm bored?

  PS: Sorry for my English...

  Interesting to note that the problem is specific AIR. I'll take an AIR project to see if I can reproduce.

  You can try this test on a newer version of TLF? The new CFC is available here: http://opensource.adobe.com/svn/opensource/flex/sdk/trunk/frameworks/libs/

• Satellite L675-11R - crashes when loading the BIOS

  Hello

  My daughter L675 crashes when loading the BIOS.

  Yesterday the system firstly could not start with a "Boot failed" error, as the HARD drive is not found.

  I restarted and is gone in BIOS - the HARD disk was recorded and shown as a first Source of seed. After reboot, the system has failed again with the same error.

  After several attempts, even if it does not. now that appears in a black screen, blinking cursor top left. Hot start works, but another key not seem to provoke a reaction. I can't start the BIOS Setup.

  I removed the HARD drive and connected it to my PC. It was recoginized and I am able to write to it. A W7 disk verification completed successfully and some problems have been "fixed". But when I reinstall the drive of the laptop, it still does not start.

  I double checked that the drive & Modules of memory are well inserted.

  Any ideas I can try?

  Thank you

  John

  Well, the cursor blinking in the upper left corner is a typical sign of a malfunction of the HARD drive.
  I think you need to format the HARD drive using other computers. Delete all partitions and insert the HARD drive into the L675 again.
  Then try to install the Windows system on this device.

  In addition, you can try to check this HARD disk using a 3rd party software.
  Drive Fitness Test is a free tool that can help you test the ability of the HARD drive.
  If some errors would be detected, then a replacement HARD drive would be desirable.

• Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

  Hi, I recently bought a Satellite A200 - 1VO and when using the laptop without a windows mouse explore 'restore down' at random.

  I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.
  You can also consider its under warranty.
  Any ideas anyone?

  Hello

  It s a bit confused what you´ve writes down. What do you mean exactly, where´s the problem and what you want to tell us when writing:

  > and when using the laptop without a windows mouse explore 'restore down' at random.
  >
  > I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.

  Whereas it should be, where´s now the problem?

  Please give clear and understandable feedback, then I and other users you could point to the solution.

  THX

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• disable the touchpad when using the mouse?

  How to disable the touchpad when using the mouse?

  Hello

  Please contact Microsoft Community.

  Most laptops have a function key (FN) which can be used in combination with other keys for example FN + F2 or FN + F7 to disable or enable the touchpad.

  You can also disable the touchpad in Device Manager.

  To disable the touchpad in Device Manager, follow these steps:

  1. Click Start.
  2. In the start search box type devmgmt.msc, and then on enter.
  3. In Device Manager, expand mice and other pointing devices and locate the touchpad.
  4. Right click on the touchpad and click on the disable option.

  Following the steps above should help you disable the touchpad.

• Why photoshop cs4 crash when you open a file? (Mac OS 10.6.8)

  Why photoshop cs4 crash when you open a file? (Mac OS 10.6.8) I rebuilt of prefs and reinstalled Photoshop without any positive result. I can create a new file, but is unable to 'place' anything because both accidents.

  Try to run the software update from Apple once more. An update of security published on 1 February was wobbly.

  http://tidbits.com/article/12768

  http://www.Google.com/search?q=security+update+2012-001+Rosetta

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.