CS5 avoiding window resizing when the zoom in/out

Similar Questions

• Way to stop the window from resizing when the zoom?

  Hello.

  Is there a way to prevent resiging window when the zoom / out of my Photoshop documents?

  What seems to happen to me, like, hundreds of times a day is keeps resizing of the window when I Zoom in and out, and a large part of it goes behind all my palettes. So I drag the resizing handle to reduce the window only that she either resize again the next time I have to zoom in or out.

  I couldn't find a preference for it. When I used to work in Photoshop for WIndows I could have sworn that the window has never changed size unless I resized specifically it...

  Thank you!

  Preferences > General > Zoom Resizes Windows.

• How to stop the background web resizing when the zoom in an out?

  IV adds a fill background (tried it on the master page and the actual page), but when I view it in the browser and try to zoom in one off the bottom evolves with the content?

  IV done it before, but can't find a way to do it again?

  See you soon

  You will need to change the type of fill to full size; the other two settings both try to fill the entire width of the browser

• keep the size of the zoom in/out absolute when brush

  I wonder if it is possible, or is there a way for me to keep my brush of the same size when I Zoom in/out to a drawing.

  what I mean is if I put my brush 80px and my drawing at 50%, the size of my brush is a relatively good size, but if I Zoom in/out the relationship between the size of my brush and modifications of design. my brush will appear bigger if I'm at 100% even if it is still to 80px.

  so I would like to know is possible to keep my brush to 80px, but always keep the size that is when my drawing was 50% even when I'm at 100% zoom? because I Zoom in and out a lot during my cycle of painting and it's a pain to have to constantly change brush sizes.

  P.S. I know the shortcuts after you press [] to change brush sizes.

  I use Photoshop CS6 on a windows 7.

  Thank you very much.

  ♥

  Hi Linnt_roller,

  Because the tip of your brush is set to display the actual shape and size of the brush, if your brush is a circle of 80px, this circle more and smaller as you zoom in and zoom out - this is because the pixels are larger or smaller as a percentage of your screen size. Changing the size of the brush when you zoom in and zoom out is actually the tool you draw with.

  You can control the display of the brush tip cursor, if that's any help - there are several options in the preferences > cursors.

  However, it is not possible to automatically change the brush size when you zoom in, even if looks like it's what you want to do (change a smaller brush when you have zoomed in). One option, you can consider if you use not yet she is using a Wacom stylus - with the pressure sensitivity, you can vary the size of the brush depending on how hard you press the tablet. This will not change the display of the cursor, but it will control how much area that you are painting with.

  I hope this helps!

  Mike

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• A3 landscape artboard. When the zoom is less than 100%. the appearance of the work (lines) in staircase, I can tell this resolution because something I have to zoom and it disappears. I understand the difference between vector and raster as well... looks

  A3 landscape artboard. When the zoom is less than 100%. the appearance of the work (lines) in staircase, I can tell this resolution because something I have to zoom and it disappears. I understand the difference between vector and raster so... this kind of problem is like when you zoom too in an image and it becomes pixelated... but otherwise...! I have a macbook pro 2012 model, the retina. is my screen resolution. I thought that the apple screen product meet good standards of adobe creative products... Reviews

  Check if the switch between the GPU and CPU makes a difference: Cmd E

  Or turn in the preferences: GPU performance.

• Resource pools can be saved and restored to avoid loss if/when the DRS is disabled?

  Resource pools can be saved and restored to avoid loss if/when the DRS is disabled?

  The NARPC script did what you wanted to do?

• U2715H - Windows automatically resized when the screen turns off then turn it back on

  • Windows 8.1 Pro
  • 1 single monitor connected to the PC
  • native resolution 2650 x 1440 at 60 Hz the value
  • through CDM of the monitor to the RFP the ti EVGA 750 SC (cable Dell)
  • all drivers updated on 28/12/15

  I just bought this monitor and I noticed this strange behavior. Whenever I have turn off the monitor (or it will turn off by itself), if I didn't have a maximized window, all windows (regardless of size) gets automatically resized to fit in the left upper quadrant when the screen turns back on again.  If I had something full screen, this behavior does not occur.

  I find this very annoying. This behavior happened with my previous monitor, which was only 1080 x 1200.

  I was unable to find any setting for the U2715H disable this "feature". This isn't because EasyArrange from Dell. I do not use this feature. And this always happens with Display Manager not installed.

  Is it just a 'feature' of Dell U2715H? Is responsible for Windows? Help, please.

  TIA

  There was no pilot or changes to the hardware of my first post.  BTW, my monitor is a Rev A02.

  A few days after my previous message, another question emerged.  Monitor flash intermittently ON / OFF every few seconds.  I unplugged/replugged the cable CDM - DP and that seems to fix things... until the next day.  This time, I nothing could fix the random rotation power SWITCH of the monitor.  Desperate, I decided to plug an old HDMI cable, I had to hang out.  Flashing problem has been resolved.  Not only this, using HDMI solved my original problem of auto resizing windows.

  The solution to my original problem: use an HDMI cable.  I went to the Dell CDM - DP cable and the problem has been resolved; no more windows resize automatically when the monitor turns off in sleep/towers.  I always get the native resolution at 60 Hz and there is no noticeable disadvantages to the use of the HDMI versus DP interface.  I've been using the HDMI cable for about a week and there is no other issue.

  Just for additional verification, I bought an Accell UltraAV DP - DP 1.2 cable (B142C-007 b-2), one of the few officially approved by VESA (see link below).  Using this cable does NOT my automatic window resizing problem original.  I do not use it long enough to see if they would prevent the random flashing question.

  I still don't know the exact cause of my original question.  I guess it's a driver problem with DisplayPort standard.  But if you do not need DP 1.2 functionality, I suggest that you just use your GPU HDMI output (if she has a).

  www.DisplayPort.org/.../How-to-Choose-a-DisplayPort-Cable-and-not-get-a-Bad-One

• Jump 8 windows cursor when the finger on touchpad

  Just bought a 1015E Asus laptop.  The cursor jumps around when a finger is on the touchpad when the finger is stopped.  I tried the sensitivity setting and increase pointer is selected.  Problems continues if I change the sensitivity and if I deselect enhance pointer.  I think that it is driver related. If I take my finger on the touchpad or the finger is in the lower left or lower right click typical of the areas of the touch pad it keeps jumping around.  Thanks in advance.

  Hello

  
  
  
  
  Thanks for your posting in Microsoft Community
  
  
  Concern seems to be a hardware
  This type of isuse happens chipset and energy management and the touchpad is not properly installed or defective hardware
  Some laptops may have a button around the touchpad or an icon in the system tray that allows you to temporarily disable the touchpad.
  
  
  If you have other devices of entry as a mouse, keyboard, graphics tablet, etc., try to unplug these devices to ensure that they are not the cause of your problem.
  Make sure that your laptop has the latest Bios Update
  
  
  
  
  Please contact asus team or visit the website to download driver download above driver and install
  If the same question post here for more information
  
  
  OR TRY THIS
  
  
  1. Click Start and select Control Panel.
     
  2. Double-click the mouse control panel.
  3. Click on the large icon of the Touchpad that is in front of you.
  4. In the main menu of the Touchpad, click on the button of device selection.
  5. Place the Stick pointing to Disable radio button.
  6. Place the radio button buttons pointing to Disable.
  7. Click OK.
  8. In the main menu of the Touchpad, click the button of the Touchpad settings.
  9. Uncheck the tap click checkbox.

     Note: You can move the sliders Touchpad speed and tactility to the parameters of your choice.

  10. Click OK.
  11. In the main menu of the Touchpad, click the scroll button & Zoom parameters.
  12. Clear the check box turn on Zoom.
  13. Clear the check box enable the circular scrolling.
  14. Uncheck the enable box.
  15. Click OK.
  16. In the upper right corner of the main menu Touchpad, click the X to close the control panel.
  17. Close the Control Panel window.

• Can the workspace of Photoshop CS6/interface be resized when the bottom is bleeding off the screen?

  I realize that this is perhaps a silly question...

  The cs6 window-space to work/interface can be shortened in height when the lower corners cannot be seized?  The top of the interface is at the top of the computer screen.  I can't drag the interface to the top above.  Y at - it a keyboard shortcut?  I tried searching forums and websites and impossible to find a solution.

  Too bad.  It just click button at top left and resizes window on the screen.  Pretty obvious.

• The download window appears when the file download but not display download status or maintain the list of downloads as in the past - how to restore this option?

  Formerly the download window showed the State of the download in process and retained a list of files downloaded until I deleted from the list. Now an empty download window appears automatically when I download a file. The window does not reflect the status of the download, download name, etc.. But there is no display of downloaded files. How to restore the function of the download window? I checked the option to display the download window when downloading.

  Check some settings:

  • Options > privacy > [X] do not forget the download history
    • See-> https://support.mozilla.org/en-US/kb/Options%20window%20-%20Privacy%20panel
  • When the use of clear recent history or erase automatically history when Firefox closes, do not check download history
    • See-> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Restore windows files when the connection does not work

  After an accident at some point, I noticed "Restore to folder windows when connecting" did not work.

  In "Folder Options - view" it is checked.  Also, I did 'Restore Defaults' and rechecked it.

  Confirmed also with regedit it wasHKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\PersistBrowsers set.

  Another user on the system do not have the problem.  How can this be corrected?

  Concerning

  Ray

  Raymond,

  What is the version of Windows installed on the computer?

  I wish that you perform a scan of System File Checker-

  https://support.Microsoft.com/kb/929833/en-us

  If it does not then, I would have you decant the contents of the user account to a new user account this account is possibly corrupt.

  Refer to this article-

  http://Windows.Microsoft.com/en-CA/Windows/fix-corrupted-user-profile

  Thank you.

• Update the Configuration failed on Windows Vista when the computer was closed prematurely at sea

  My son turned off the computer before the update of configuration was complete.  It uses a Compaq Vista premium desktop computer.  The operating system will not load (it is stuck in a loop trying to reconfigure the old settings before the update).  We have tried to start in Mode safe mode and do a system restore.  The first available date is November 15, when the update occurred.  System Restore got the point to finalize and then jammed (lasted at least 4 hours).   Any suggestions other than a complete system to recharge?

  Hi DRoggeman,

  Welcome to Microsoft Answers Community Forums.

  I suggest you to do the Startup Repair to fix boot of startup problem and uninstall all updates you have installed.

  Reinstall or install updates for your computer by going to http://windowsupdate.microsoft.com

  To perform the Startup Repair, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note

  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  For more information, please see the links below,

  ·          http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem Fixed a problem starting to boot.

  ·          http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions Frequently asked questions.

  Hope this information helps you.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• S110: Flash pictures are too dark when the zoom

  I just got a S110 to replace my S95.  I still know my Reiver way the new camera (despite its commonalities with the S95) and a whim that I noticed is that the moves by using the built-in flash are severely underexposed if I use any sort of zoom.  That is, they are exposed to good right to 24mm.  This was never a problem with the S95 (assuming that the subject was within reach of the flash at all focal lengths, of course).  Others have this problem?  Is there a setting that I'm on?  All my tests were in P mode (or program AE as the manual calls it).  Thanks for your help.

  Hello

  The scope of the flash on your S110 is only 7.5 feet on full telephoto, who is less than 22' on wide angle range. About the S95, it lists about 22' without a distinction between scale and TV. It will be less focused on telephoto than your old S95 at least in part because the variable aperture on your new goal tightens down closer that he did on your old.

  Both devices have a variable maximum aperture (lens opening). This means that the wide angle the lens opens wider it will open the telephoto. So less light can penetrate into the camera when you're zoomed in on something. It is measured by the number f /, and a lower f number means a larger opening. Your new camera is taken down tighter than your old a fact. S95 was f/4.9 max full telephoto. S110 is f/5.9 when the full telephoto. This difference in aperture is perhaps sufficient to reduce the scope of the flash on TV.

  I wonder if the S95 MIT had a concentration of telephoto flash, which may be missing on the S110? I've seen mentioned in the specifications at all well.

• How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

  I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I run connect the non working pc a working PC to access the cdrom on the work pc to reinstall windows?

  First of all, you are mistaken when you say that the PC does not start.

  This is clearly starting. The problem comes from Windows, not with the real PC. It's actually a very important distinction!

  There are methods to repair Windows, but they can be a bit tedious. By all means, follow the advice given here to do if you're so inclined.

  If you would not rather to repair Windows (and I think it's interesting a try) or your repair attempts are unsuccessful, apparently, you would need to use an external optical disc drive and follow the instructions here:

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631