CS6 and 8.1 Windows installation

Similar Questions

• I'm in CS6 and the application window is too big on my laptop, it is off the screen both sides?

  I am in CS6 and the application window is too big on my laptop, it is off the screen on both sides, I have to scroll through the different menus. I tried Window / better and there is no options, window/workspace allows me to reset, but it doesn't matter. Is there a way for the application to adapt to the size of my screen?

  You can click on the Maximize button, which should fit photoshop to the screen?

  

• ProBook G1 430: Encrypted hard drive and the corrupt Windows Installation

  My laptop has an encrypted disc using HP drive encryption.  Recently, the Windows installation has become corrupted and I could not repair the installation using floppy disks to install Windows because they cannot access the encrypted drive, nor can they be accessed by other facilities of Windows if I plug in the external drive.  The two methods see the Windows partition as a RAW format.  I guess it's only because the partition is encrypted and has no way to determine the actual format type.

  I searched around to find clues as to how I could get past the encryption, but without success.  The computer is no longer under warranty, so I'm looking for options that will allow me to have access to the data.  The methods I've read all required the computer under warranty.

  I can still go through the encryption after the computer starts, but Windows Setup gives an error and tells me that I must use an installation disk to fix.  I have attached a picture of the screen of the error.

  I'd appreciate any help anyone could provide to solve this problem.

  After much patience and time on the phone with HP, I finally able to return the encrypted Windows installation.  They gave me a copy of the WinPE environment was a software that allows you to decrypt a partition which was encrypted with their software and execute commands Windows on it.  I then ran the repair bootbcd order and I was able to get Windows to start.  To obtain this software, my case should be escalated to tier 2 support.

• Viewer for documents and pop-up Windows Installer.

  I would like to help, I have no problem on the Internet and you want the problem I have is: every time I click on the TW 08 game I get a Windows Installer and viewer of documents pop up and I'm not allowed in the game TW can you help me.

  Hello
  You try to play online?

  If Yes, then you can try to run IE in mode without modules.
  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  If this isn't the case, then you can try to clean boot.
  http://support.Microsoft.com/kb/929135

  Jackson

• I try to install or uninstall programs, but a message appears and says "the Windows Installer service is not to be accessible" GOLD that the system administrator has set policies to prevent this installation

  Several times I tried to install itunes but a message pops up saying

  • Windows install is not properly installed and

  I also try to uninstall programs and whenever it says the system administrator has set policies to prevent this installation, but I've changed my settings so that I can be the administrator

  • the windows service install could not be accessed
  Hello
   
  You may encounter this error message when the Windows Installer files on the system are missing or damaged.
  You can resolve the error by using the methods mentioned below:
   
  Method 1: Start the Windows Installer service
   
  a. Click Start, type "Services.msc" and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.
   
  Method 2: Unsubscribe and re - register the Windows Installer
   
  a. Click Start, click Run, type "MSIEXEC /Unregister." and then click OK. Even if you do it right, it may seem that nothing is happening.
  b. Click Start, run, type "MSIEXEC/REGSERVER" and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
  After you run this command, the operation is complete.
  c. try your application based on Windows Installer again.
   
  Method 3: Scan SFC
   
  Perform a scan of the SFC to check if this is related to the missing or corrupt file system.
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• WebCenter and UCM on Windows installation

  I have a small question about the good installation sequence for portal WebCenter and UCM on Windows XP. The goal is to use the AAU of WebCenter repository via a socket Oracle Content Server connection.
  
  During the installation of the WebCenter on Windows I don't see a command prompt to install Complutense University of MADRID. This means that I have to install the Complutense University of MADRID, with the installation of the AAU program? I tried that before and for some reason it does not - I couldn't see everything new WebLogic servers created. When I tried to start the WebCenter managed servers I got an error that installer64.exe is not a valid Windows32 application. What AAU weblogic server is supposed to work on?
  
  Can you give me some advice on the correct installation of the UCM? I intend to access the content of the AAU of WebCenter portal, so it is possible to skip the installation of the web server? I would like the more compact, the installation option faster because it was such a WebCenter training workshop.
  
  Thank you
  Igor Mameshin

  First of all, it seems that you run a 64-bit installation program on your 32-bit windows computer. This is why it does not work.

  University Complutense of MADRID must be installed separately of the WebCenter. PS2 you could do it at the same time, but now, you need to install sepperatly. First install WebCenter, you install UCM. When you install the AAU in the same directory of fusion middleware, you can create a domain with webcenter and UCM. When you do so, you will have two servers managed to webcenter and UCM.

  UCM is now fully integrated in the weblogic domain. You do not need to install two weblogic, you can use the one you have installed for webcenter.

  When you run the RCU to WebCenter and you know you are going to install Complutense University of MADRID, you can of course check the components of the Complutense University of MADRID, as well, so you don't need to run it twice.

  If you need help to install WebCenter, you can follow my step by step guide: http://www.yonaweb.be/installing_webcenter_11g_ps3_scratch
  Install the AAU will be a similar process.

• Replace drive hard and error on Windows Installer

  The hard drive on my Dimension 8500 failed. I replaced the drive with a new hard drive, Samsung Spinpoint T Series HD501LF 500 GB 7200 RPM SATA 3.0 Gb/s. I bought a new copy of Windows XP to install the disk that I had lost a long time ago the disks provided with the computer.

  All went well for a while. I entered the BIOS and saw he was grateful the new drive. I started on the Windows installation disc and got through the first step of the process. Then, the installer gave me the error message could not find any hard drives. I went into the BIOS, and it has always recognized the hard drive.

  I seem to be stuck now. Help!

  
  

• CS6 64 bit (for windows) installation keeps telling me to stop Bridge CS5, which is not running.

  I checked that the windows 7 Task Manager and Bridge CS5 do not appear.  If anyone can help with what I am to do this, can I finish the installation?

  This error occurs when Adobe Bridge is configured to start when you connect, so it runs in the background.

  Please see article kb for resolution:

  http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html

  Kind regards

  Ashutosh

• Formatting and recovery of Windows installation on Satellite M60

  Hi guys!

  I want to format my Toshiba Satellite M60 soon. But I don't have the slightest idea how to do this and even more I don't know how to recover my Windows XP. I have Toshiba Express Media Player Recovery CD but nothing else because Windows was already on my drive.

  Can you help me how to format and recover my factory settings on my laptop?
  Help, please
  gasina

  Hello

  Without much discussion: factory settings you can have if you install the operating system via original Toshiba recovery CD/DVD. Unfortunately, you do not have it.
  Now, you have two options: either you try to order and buy a new one (by authorized service provider), or you install WXP using the facilities of Microsoft CD. All the necessary drivers, tools and utilities that you can download at Toshiba support site.

  If you need more info please let me know.

• Had a message saying computer might be infected and my Windows Installer is missing.

  Original title: I got a message saying my computer may be infected and my Windows Installer is missing...! How can I solve?

  Got a message saying my computer may be infected and my Windows Installer is missing...! How can I solve?

  Hi JohnYusko,

  1. have you done any hardware changes or software on your computer before this problem?

  2. do you have security software installed on your computer?

  3. when exactly you receive this error message?

  (a) I recommend you run a virus scan online from the link given below and check if the problem persists:

  Microsoft safety scanner

  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.

  (b) you can also download & run Microsoft Security Essentials on your computer.

  Due to Windows Installer, you try to unregister Windows Installer, and then reregister Windows Installer and check if the problem persists. To do this, follow these steps:
   
  a. initially, box run, type "msiexec /unreg" and press ENTER on the keyboard.
   
  b. Type "msiexec/regserver" and press ENTER on the keyboard.

  Hope the helps of information.

• Try to install solidworks 2011 on my laptop and it always gives me an error message: internal error. Have not run the Windows Installer service for this product as expected element: InstallExecut

  Error installing program on Windows 7 64 b

  Hello everyone, im trying to install solidworks 2011 on my laptop and it still gives me an error message saying "error interno. Without to ejecuto el servicio Windows Installer para este producto componente como is esperaba: InstallExecut "(sorry for the Spaniards, that solidworks is in Spanish). What can I do to fix this? I searched a lot of google to fix it but I couldn't yet. Thank you!

  my laptop has windows7 64B

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  --------------------

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Also:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  -------------------

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

• my windows installer is damaged. can I remove it and reinstall an upgrade?

  I can't download updates (and there are many other tasks, I can't do) because an error box appears and says my windows installer is installed incorrectly. It is Windows 7 and it worked fine before.

  Hello

  See if this MS documentation helps you solve the Windows Installer service in Windows 7

  Error "The Windows Installer could access the Service" when you install or update programs on Windows 7 or Windows Vista:
  http://support.Microsoft.com/kb/2642495?WA=wsignin1.0

• Photoshop CS6 and pulled down a window after the computer screen

  I'm on a MAC and Photoshop CS6 and pulls a window down after the computer screen. How can I get that back?

  Try to click the Green maximize button.

  

• Connection Manager HP stopped responding + Windows Installer Error 1719

  I am running Windows 7 (SP1) 64-bit operating systems.
  
  Started getting an error message of connection manager HP "HP Connection Manager Service has stopped responding.  Error code 8008005.
  
  HP Connection Manager v4.1.23.1 running.
  When I try to install a new version of v4.4.10.1 (SP58930) HP connection manager, I get an error of Windows Installer 1719.  Tried different solutions recommended for this, but nothing has worked.
  
  I see in the forum after this uninstall of the current version and then install the new version of the HP connection manager can solve my original problem.
  
  Before uninstalling the currenet HP Connection Manager version, I wanted to be sure that I will be able to install the new version without encountering Error 1719.  I don't want to be in an even worse situation of not being able to the HP Connection Manager after you uninstall it.
  
  Can I get confirmation from HP that I will be able to successfully install a new version after uninstalling the current version?

  ParryJM wrote:
  

  A ran the Microsoft Fixit then tried to install it and got the Windows Installer Error 1719.

  Then uninstalled HP connection Manager.

  Tried to install the HP (SP58930) connection manager and still have the error Windows Installer 1719.

  What do you suggest I try next?

  The fact that HP Connection Manager is no longer installed, how this will affect my computer?

  The fact that it is no longer installed will have no effect on the functioning of your laptop and none on the operating system.

  HP connection manager is simply a utility assistance for people who are making it difficult for the network through conections wifi and bluetooth connections.

  If you are not in this group it is really useless.

  From your description, it seems that if you can't follow instructions in the Microsoft fixit to the letter. By using the fixit is the easiest way to remove the registry entries and make changes to the registry that will allow installing and uninstalling software.  I can't recommend the methods that I use personally when I run on these issues because they involve access to the registry via regedit. The word people have never even heard of Regedit. Using Regedit can be a very bad thing for someone not experienced in the use of the registry editor.  All ch = angels did take place immediately and which included all the mistakes made during the access to the registry. Ongoing work on an operating system can fairly easily through the registry editor. Try the Microsoft fixit. It is a safe utility. Use it after an attempt to install and leave the window open until after error that does compete with the installation of the software.

• Windows Installer box popping up

  Windows Installer box continues to appear, takes a long time to go, if it does, can not cancel it. Pages don't is not loading and it freezes everything up.  Help, please!

  Hey DariSue,

  o the operating system that you are facing this problem?

  o you get pop-up window during execution of any specific activity or during any specific time?

  o also what message you get with the pop-up?

  Follow these two steps to solve the problem.

  Step 1: Unregister Windows Installer and then reregister Windows Installer.

   

  For more information on how to start with this in Windows XP, see method 1 of the article in the Microsoft Knowledge Base: How to resolve common "Windows Installer" problems

  For Vista and Windows 7, follow these steps

   

  a. click Start, type cmd, right click and select run as administrator.

  b. type the following commands and press ENTER after each command:

  msiexec /unreg

  msiexec/regserver

  Step 2: upgrade Windows Installer to the latest version

   

  Windows 7 already has the latest version installed. You can upgrade the version of readers Windows Installer 4.5 install if you have XP or Vista installed.

  Get the download here: Windows Installer 4.5 Redistributable

   

  Please, check the system requirements before installing.

  For more information, see: box Windows Installer warning popping up.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.