CS6 on Win10 installation problem - says another installer running and should be stopped

Similar Questions

• Mask with a transparent visor Photoshop CS6 giving rise to problems saved as Tiff RGB and placed in Indesign CS5

  Is anyone aware of a black halo around objects of transparent feathers. The halo occurs when the area full of pic feathers to transparency.

  NOTE: The Image looks fine in Photoshop (CS6), but when it is placed as a TIFF RGB in Indesign (CS5) a black halo appears on the page. See Visual explanation below.

  

  This only happens when the image is a RGB Tiff and the layer mask is used to create transparency. If the image is saved as .psd, then it's fine. Also when tiff RGB is converted to CMYK, then it is ok.

  Is

  I look forward to suggestions from anyone.

  Ideally I might just start using the psd format, but I have to manage a lot of images that are already in tiff RGB and it's tedious to have to open and re-save all these.

  Adobe Photoshop CS5 RGB TIFF still work correctly.

  Thank you.

  Colourjam.

  (Production operator pre-press Digital Image)

  Tried your image. Same results. Halo in CS5, CS5.5 or CS6 none.

• Firefox didn't stop when I close, and it stays running but doesn't charge on the screen when asked. It says Firefox is running and will not let me recharge. I end up close with the Task Manager. Suggestions?

  See the above phrases. Firefox continues to run, but the screen cleared of Firefox and I can't restart from the icons.

  Hello

  Please see this. Please note that the precise way of closing of Firefox's file (Alt + F) > exit and would usually take a few seconds depending on the history of the parameters of compensation to Tools (Alt + T) > Options > Privacy > settings next to clear history of Firefox closing. If there is delay in a plugin, you can also try to complete the process the process plugincontainer and check if Firefox closes on its own.

• Windows mail starts loading (say, gets 6 65) and if interference stops, just upwards. Help, please!

  See the above headline.

  Here are e-mail messages incoming messages? If it stops at #6, #7 is too big or damaged. Log in to your webmail site server and delete the message complained, he. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Windows Update program stand-alone installation running - to a standstill

  Windows Update does not work, just hangs.  INSTALLED

  The system for Windows 7 for x 64 systems update tool (KB947821) [October 2014]

  BECAUSE IT WAS NOT LISTED AS AN INSTALLED UPDATE.  This tool is being offered because an inconsistency was found in the store Windows Service that may prevent the installation of future updates, service packs, and software.

  Now Windows Update Standalone Installer running and cannot cancel.

  The windows update worked for some updates on 08/08/16 in the .net framework and MS Office.  It will just be updated, the Windows software.  I have Windows 7 SP1 - came with the laptop.

  Unfortunately, if you visit the page MS lately to download Ko (and a few other KBs) get to cooktop page on the KB still seem to work but when you try to start the download, you might get one of two results:

  

  Or maybe you will see this (but never begin to download):

  

  Which ALWAYS seems to work to get the download is to visit the Microsoft Update that requires using Internet Explorercatalog.

  Copy and paste this URL in the address bar of Internet Explorer:

  http://catalog.update.Microsoft.com/v7/site/home.aspx

  Search for the update of your desire:

  

  Add then the KBs you need to your shopping cart, then view or download the contents of your basket and install it / them.

  See here for more details:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

  So we can suggest a link which could sometimes work perhaps (https://support.microsoft.com/kb/3172605) or we can suggest you to use IE to go directly to the page catalog of update of MS where downloads seem to work all the time.

• Widespread problem "Firefox is already running" suggests it does not close properly - is Mozilla solve this?

  Several people including me have reported a problem when closing Firefox and then try to re - open. The message "FF is already running and should be closed... ' appears, but the taskbar does not display an active FF. At this point, it is necessary to use the Task Manager to close the old term.
  1 this not always the case on my computer has started recently.
  2. most of the time that it is indeed possible to open multiple versions of FF without difficulty. This problem only seems to happen if I close the first session and then immediately try to open a new.
  So my question is what causes this, not what workaround to usable solution when it occurs.

  1 both of these problems (ending to Firefox and restart) are a response

  http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#close_firefox

  2. multiple versions of Firefox you have to use -no-remote on your combination of browser/profile not by default. Which cannot be by chance, so either you messed up in start parameters, or you didn't never have multiple versions of firefox running at the same time.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• CS6 - Web and Design Suite - Win10 installation problems

  Hej all

  I have a new computer and have been (unsuccessfully) trying to install my Web Design CS6 follow up on this. First I tried (two or three times) to use the download - but it works all the way. Installs as Acrobat Reader worked for this, but Photoshop, Dreamweaver, InDesign did not. So I thought that maybe the file is corrupt and tried to install it from my purchased DVD. Come to the same result - installation works completely, but ultimately, I receive a warning that some products have not been installed correctly. I also have the option to look at the summary - the mistakes that I clicked on. But cannot open the file - now, I checked in my records (according to Adobe FAQ), and he says:

  06/09/16 17:01:19:536 | [ERROR] |  | OOBE. OF |  |  |  | 3352 | DF024: Cannot move the file in "C:\Program Files (x 86) \Common {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} \_340_871c903a90c4 5ca08a9d42803916c3f7.

  DW063: Error to reverse order...

  DF023: Cannot delete the copy of files to...

  DF037: Cannot delete the directory...

  DR011: Registry permissions checking.

  I uninstalled all associated with Adobe and run CCleaner to remove all that concerns my registry as well. Unfortunately - without success. Which leaves me confused and without my programs on my computer.

  On my machine:

  It is a PC, running Windows 10 Premium 64-bit. There an i7 from intel and is this year - I can run and install the CC Photoshop (for example) and all the rest. I'm just not able to install my suite CS6 correctly.

  Does anyone have an idea what I could try to do? I am at a loss...

  Thank you

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  -so if you have an older, program update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions Windows COMPLETE can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through. Now what? I tried to repeat the process about 6 times now!

  I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through.  Now what? I tried to repeat the process about 6 times now!

  Sorry for the confusion.  I must be useless to English.

  Forget the two laptops.
  I have a problem with a laptop that I tell you all (the Inspiron 1720).
  The disc that I use is labeled as a Windows Vista reinstall disk and provided with the computer when I bought it.  I'm not trying to use it on another computer.

  Reference Dell it is a problem with a process of recovery of Windows and, therefore, a problem of Microsoft.

  See you soon

  Problems with the Dell restore process, contact Dell.
  Dell wrote their recovery process and provided you with this DVD, NOT Microsoft...

  It is their software.

  Ask them for a different recovery DVDs.

  You say that the hard drive has failed.

  He could have more than just tough that failed.
  You can have other hardware issues.

  Hardware issues are beyond the scope of these Forums.

  Good luck with Dell.

  See you soon. Mick Murphy - Microsoft partner

• CS6 on MacBook installation without CD player?

  Hello

  My son has CS6 Design Standard (student) and wants to make his iMac disable it and activate it on a new MacBook Pro. the problem is that there is no CD on the MacBook drive. Is there a download that can be used instead of the drive, and if so, existing since her CD serial number will be able to activate it?

  We already have the 2nd installation running on another machine, so this isn't an option.

  Thank you

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -Membership questions and problems https://forums.adobe.com/thread/1146459

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  -for Lightroom https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• OfficeJet J4550: Could not load the driver for the WIN10 - installation hangs

  Updated my Dell XPS to WIN10. I tried to upgrade the driver for my J4550 but installation hangs at the beginning of the installation process, "control systems".  When I tried the download, the old files from HP devices detected HP program and deleted. Now my computer does not even recognize the OfficeJet when you plug into the USB port.

  Need help why computer does not recognize the printer no matter what I do and how to get the computer to download the driver.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, run the following tool:
  FTP://ftp.HP.com/pub/Printers/datfileremover/installdatfileclean.exe
  Then, run the Setup file and check all difference

  Kind regards
  Shlomi

• RE6500 installation problems - cannot find wireless network and wifi protected setup custom exceed 99%

  HII there, I bought a RE6500 rande Extender and wireless network has not automatically shown as the instructions, he will say.

  Ive tried following th online PDF instructions under "Basic settings" and have connected it, so when I go on 'Wireless' under "Connection with the Wi - Fi Protected Setup Button" and press the button on the Extender and the establishment, it does not exceed 99%.

  can anyone help!

  Thank you! I was just trying to find the network on the PC I used to put in place. It was not showing on my PC, but I tried my iphone and it is available here. Then, I followed the installation instructions and did the whole upward on my iphone (not on the PC as I originally did) and it worked. No problems!  Thank you!

• Whenever I try to download Adobe after effects that it says the installation failed and nothing HELP Please ME

  I tried to install after effects but then it says installation failed and come to this:

  Exit Code: 6 Please see specific errors below for troubleshooting. For example,  ERROR: DS012 ...   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 7 error(s)    ----------- Payload: Adobe After Effects CC 2014 Presets 13.0.0.0 {B11629D3-E9EE-467B-B9C6-30D37E2A39CF} -----------  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 351)  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 683)  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 685)  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 687)  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 689)  ----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.5677 {539B5BB0-18F9-11E2-BBBC-00215AEA26C9} -----------  ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603  ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Aejeaz\AppData\Local\Temp\{907694F0-1B67-475C-8E74-2B81DF08E30B}\AfterEffects_13_LS20\Adobe After Effects CC 2014\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com  ------------------------------------------------------------------------------------- 

  A new update came out and fixed the problem I had so thx

• He knows the error code. When he asks if I have an installation CD, and I click on the box that says I'm doing, I'm asking to choose m printer (Lexmark 730 series all-in-one) list I can find the Lexmark but not the 730 series.

  The installation CD and my add new hardware wizard does not appear to recognize this printer.

  Hello Debbie Cross,.

  Thank you for your message.  I struggled to find the 730 series printer, do you actually mean the Z730?  If so, click HERE to download the latest driver for your printer.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell

  I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance

  original title: where to find WIndows Poweershell?

  Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.