CS6 problem installation DVD

Similar Questions

• Problem reading Captivate 6 on Vista installation DVD

  I just got my copy of Captivate 6 on a DVD for Windows. I would like to install 6 Captivate on a PC running Windows Vista 64-bit service pack 2.

  My DVD player can not open the installation DVD to start even the installation. Is there a way I can install 6 Captivate on my system?

  PS - I already paid for this copy of Captivate 6.

  Well, it is a mystery. After asking the question, I downloaded and installed the trial version and then used the product code for the version purchased to get a serial number. It worked.

  I also tried on the installation DVD on another computer with Windows 7, and he began to autorun as expected.

  I then returned to my PC Vista, inserted a former Acrobat DVD installation, which began in the autorun as expected. I removed the Acrobat installation DVD and inserted the new Captivate 6 installation DVD, and magically it started autorun this time.

  It must have been my optical drive, but I don't know why he read the DVD this time and not others.  (Never had any error message. The computer just did not read all the data on the disc and was always looking for media to be inserted. "Maybe something is slightly misaligned?)

  In any case, the problem is resolved and the software is installed and registered. Thanks for your reply.

• Installation DVD does not recognize my internal HD on a 2008 iMac

  I'm looking for suggestions here.  My 94 year old mother has used the iMac 2008 8.1 for internet e-mail.  We needed to upgrade its OS X 10.5 to be able to upgrade to a new version of safari to access some banking sites.  I upgraded the memory.  Sister has an iMac with OS X 10.6.2 Installation/restore dvd 2010.  I went to update.  I have caused the initial problem because after reading info seemed I could create a second partition on the hard drive of 250 GB and use Time Machine to back up before preceding.  See not all the warnings on the addition of the partition. (Yes, if I had not forgotten my external hard drive I should not try that, but I forgot it.)  Things seemed to make the partition, but time machine bogged down and hung up.  After trying many things, I found myself deleting and resetting on the internal extended (journaled) using HD, recreating a single partition using the guidelines GUID, thinking that I could just do a clean reinstall.  BUT, while I can check/fix delete etc the internal disk utility when HD started from my external hard drive so I boot from the OS install DVD it does not recognize the internal HD.   ? ? ?   Gives cannot update this post Mac.  If I run the Setup from the beginning of the disk upward once again, no offers to go to in the installation program.  I can access everything in THE RUNOFF when the post boot drive.

  Why THE works on the internal HD of the post start up (which was made with the 10.6.2 installation DVD), but not when started to leave the DVD left me puzzled. The DVD is not just see the it.  When it is started from the DVD with the external drive, he sees very well.   You are looking for ideas, thank you in advance.  By the Way the machine had no problem before starting this :) live and learn!

  If I understand what you were doing, you tried to use a Mac installation disc and to update another Mac? Is this correct?

  If I am not mistaken, which simply does not work. The installation provided with Mac discs won't work on another Mac, the original installation discs are machine-specific.

• Only UEFI won't boot Windows Installation DVD

  As you can see on my subject matter, my phone W520 won't boot from my Windows 7 Installation DVD when it is set to UEFI mode only. I get no error or anything, just the screen goes black for a second and go back to the Start Menu and when I select the DVD player. For what it's worth, my hard drive is already partitioned GPT, and I need to repair the installation.

  Before you ask for help, I just want to mention that I created this particular Installation DVD of Windows 7 using the all-in-one tutorial that I have 32-bit and 64 - bit options all on the same disc. The drive starts very well in boot mode "Legacy/UEFI", so I don't know what the problem is. Someone saw this?

  EDIT: I followed this tutorial: http://www.insanelymac.com/forum/index.php?showtopic=186440 and I'm in step 14.

  
  

• I followed all the steps in the Michael Murphy answer regarding the error code 80070490, but still it does not work. I can't follow step 2 I have lost the installation DVD. Help?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: solutions for error code 80070940. See above.

  Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You should always respond to the original thread:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/11678342-0D0A-48F9-9186-726a654a34b7

  Options:

  1. find the misplaced installation DVD.
  2. see if benefit you from a replacement or need to contact the manufacturer for a replacement of DVD.

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  Once you have the installation media, then maybe you can then continue with the steps that Michael Murphy outlined for you. TaurArian [MVP] 2005-2010 - Update Services

• Windows 7 x 64 installation DVD does not start on a Dell XPS One 2710

  I apologize in advance for the long post...

  Just got a Dell XPS One 2710.  Lot has happened, but let me clarify the current number as briefly as possible: the machine does not start from the HARD internal disk or the Windows 7 Installer x 64 DVD.  He gets through loading files and then gray progress bar when its colorful animation it blue screens with error CACHE_MANAGER.

  I ran the diagnostic, including tests extended memory tests, and they have not found any error in what either.

  When I was troubleshooting this problem previously, in some sort the motherboard got bricks (I don't know what exactly I did to cause that), but Dell has since replaced.  The first motherboard had BIOS version A09.  It has installed A11.

  I can't find any BIOS settings combination that will allow even the Installer Windows DVD to start with the Blue error screen CACHE_MANAGER.  I tried the UEFI boot modes and legacy, I tried RAID and AHCI.  I tried with and without loading legacy OPROMs.

  What I ultimately do is set the start mode of RAID so that I can use the SSD mSATA as a cache ("Accelerate" in the Intel RST Panel).  But I can not even the installer to start on where I can load drivers RST (assuming it's even necessary).

  Other posts have suggested problems with memory, but I took each of the two DIMMS one at a time and I always had the same problem.

  Should I suspect the hard drive?  When we arrived at the machine, he seemed to be running Windows 8 very well - until we went on the way to the side dark and downgraded to Windows 7.  Then once we started to have errors on updates, things has quickly degenerated from there.  In addition, again, diagnoses don't find any problems.

  Any suggestions on how to get at least this puppy to start?   .. .or what have we done wrong?

  Thanks EJN.  It turns out that there is certainly a hardware problem on this machine.  It was a refurbished Dell making machine and apparently when they renovated the it, they missed the real problem.

  The way I know that it is material, it's that we bought actually 2 of them at the same time.  When I started to suspect the material, I decided to try this process on the other.  He worked like a knife through hot butter.  But I will say that the combination of the BIOS set to boot legacy mode and still start the installation with the option to UEFI DVD in the start menu was not easy to understand at first.  But when I followed the correct steps, everything worked very well.

  For those of you who might try this, here are a few things I learned along the way:

  1. According to EJN, take the time to get/burn a CD to install Windows 7 x 64 that already has SP1 on it.  If you go to preserve the UEFI partitions and the boot hard disk, you must have x 64.  x 86 (32-bit) does not support UEFI.

  2 unzip the RAID drivers to the * root * your USB flash or floppy drive and have it in the machine when you start the installation DVD.  I could be wrong, but it seemed to me that the installer looked for them without having to explicitly say it loads the me.

  3. as said EJN, set your BIOS boot legacy mode but use F12 at startup to bring up the Windows Boot Manager and start the installation in UEFI boot mode DVD.  If you want to implement an SSD as cache for your hard disk, you will need to set the SATA controller in RAID mode.

  4. I had partitions UEFI and was able to leave them intact.  Here's a very brief explanation: http://technet.microsoft.com/en-us/library/dd744301%28v=ws.10%29.aspx your results may vary.

  5 take this one as a possible suggestion that is worth what you pay for it: when I got the USB with RAID drivers at the root before starting the installation DVD, I didn't need to load the drivers explicitly.  As I said, it seems that the installation program has been smart enough to find and load what it takes, but honestly, I don't know.  When I load them explicitly, I got errors saying that the installer could not install on the partition, I had chosen.  Makes me think that I could have loaded both times.  What worked for me was NOT explicitly their cargo.

  6. you MUST be at your PC when Setup has completed copy and unpack the installation files.  Don't forget that you have your BIOS set to start legacy mode.  So when he tries to restart to complete the installation, it will try to start using the table inherited from on your hard disk - who is not here because you did a UEFI installation with partitions for UEFI.  So when Setup restarts the first time, you might as well get into the BIOS here and choose the UEFI boot mode.  If you do not, you will need to grab it whenever it restarts using F12 and manually tell it to boot from your hard drive using the UEFI.

  These steps, you should get installed and running.  But another thing I had to understand that when first, I installed and executed the dashboad Intel RST, there is no acceleration option even if my mSATA SSD was found healthy.  I found that if it is formatted and partitioned, you actually go into Disk Manager and delete the partition before the RST dashboard he sees as available for use as a cache.

  I hope this helps others out of me.  It's a heck of a lot easier when the hardware is not bad!

• Windows 8 - Refresh PC pre-installed Windows key recovery or installation DVD disc

  Windows 8 - Refresh PC pre-installed Windows key recovery or installation DVD disc

  The problem is that the number of keys for Windows 8 is required for this operation, and I can't get it. I got Windows8 pre-installed when I bought the laptop, so I don't have the installation DVD, I did not collect the number of keys in any documentation or found on the laptop.

  What can I do to make sure that if I can restore Windows 8 and all my data on the laptop?

  Thanks for your help

  To put it bluntly, YOU n 'T NEED a KEY! When you reinstall Windows 8, it is automatically activated from your key incorporated in the Bios. There is no need for to go you into the Bios to get the key. With Windows 8, it is how it is done. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

• Hello everyone [problem installation and activation of Lightroom 6]

  Just downloaded lightroom 6 and adobe did not recognize the serial number to make it worse, now, the Setup program could not initialize! HELP Please

  [Title edited for clarity... MOD]

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» PLEASE DOWNLOAD A

  Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» Please DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. "then I tried to download the Advisor to support that to find it is no longer available. Accept payment until this problem is solved we know how to solve this problem?

  first of all uninstall cc on your computer.

  Run the vacuum cleaner by, http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer and reinstall the cc, Download Adobe Creative Cloud apps desktop application | CC free trial Adobe

  If that translates into the same initialization error:

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• I have real problems, installation and update of adobe programs on my mac (OSX 10.8.4)

  Here are the problems.

  Have the new Imac 27 "with 3 TB of fusion drive.

  Have CS6 LR etc, but having real problems, installation and update of program ADOBE EVERYTHING including Flash. CS6 it got to the point where I went through the Adobe representative on the online chat and we ended up having to put in place a new log-in which allowed in part but CS6 last updated has not been updated. I took my apple Mac which did a software and check HD and all is well!

  Now I signed CC Adobe for photoshop and I can't install Photoshop CC and get the following error message. This isn't what I expect from the combination of Apple and Adobe! Can pls someone advise.

  ERROR: DS001: impossible to mount the disk image Volumes/Adobe Photoshop CC/Adobe Photoshop CC/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please check that the disk image is not altered.

  Hi NinoRMann,

  The download seems to be incomplete, and that's why your Mac can not mount the image. Please try to download it again.

  Kind regards

  Abhijit

• Illustrator CS6 says 'installation failed' when installing.

  Illustrator CS6 says 'installation failed' when installing. No explanation is given. I have not all previous versions of the installed AI or any trial. Help? I really need to use this product today!

  We do not know. You must provide the information system and possibly Setup logs:

  The problems with the installation logs

  Mylenium

• Photoshop CS6 (extended) installation on case-sensitive disks

  I understand that under the "requirements" of the Adobe Web site says you can't install PS CS6 (Extended) on the case-sensitive drives (I use a MacBook Pro, OS X v. 10.7.4).  This seems to have been the case at least since CS5.

  I did not see this, and I bought (excitedly) update CS PS5 (Extended) to SP6.  I had NO PROBLEM installation PS5 on this drive.

  Of course, as others have said, the installer refuses to allow you to install on a case-sensitive drive (for example, no options to install on another drive).  There is also no mention that CS6 must be installed on the boot drive.

  Requiring installation on the boot drive has serious implications for those of us who need readers sensitive to other work; I don't want to have to restart on another drive when I use PS and switch back and forth - it's all just stupid.

  From my point of view (as a user, granted), this is lazy programming, and this must be resolved as soon as POSSIBLE.  At least in my case, I have a piece of a $400 software just too place, when I want to be up to my eyeballs enjoying PS6 throughout it's fame.

  Outside an Adobe fix, I don't see a solution to this problem.  If I wipe my drive, put in shape in case-insensitive, then I lose the functionality for other critical work.  In addition, I'm not sure the process of wiping the disk, formatting it not sensitive to case and restore TimeMachine everything would be even work (since the backup hardware is from a case-senstive drive and try to go to a drive that is not case sensitive).

  The REALLY frustrating part is that I have installed Photoshop 3, 4 and 5 (and much, much further) on the casing of the disks - all with no problem.  It is only now that the question slap me in the face.

  It has to be a work around, if not a 'real' solution.

  What help you might be able to offer would be greatly appreciated; details can be sent to cdretk at gmail dot com

  I hope, and I thank you in advance.

  Now I solved it (no thanks Adobe, who I am very disappointed).

  In the past, when you wanted to install something on your Mac, you simply copy a folder in your Applications directory.

  Photoshop (among other programs) got more complicated, it is decided that it must install things in the different system directories and potentially in your user directory.

  That is the question (and the solution, in this case).  My user directory is on the drive that is case-sensitive.  I don't know what Adobe needs to install (as Photoshop is, after installation, available to all users), but this has been the key.

  SOLUTION: Log on as another user (administrator-enabled) and install it.  Bang - it works without any problem.

  Yes, I still had to copy all my plug-ins, etc. of the PS5 by hand (and sort those SP6 is not like - once again at hand), but at least it works.

  Good software engineering practices dictate that installed software should PREFER discs case-sensitive and not case insensitive (think of the data).

  Good installation support (on the phone) should at least suggest trying another user account...

  Adobe: You owe me for my time on this one.  Where should I send my invoice?

• Back up my data with installation DVD

  I want to transfer my data to an external with installation DVD drive because my Mac OS isn't bootable anymore because of the sierra of mac os. So I'll do a new install of snow leopard on my macbook late 2009. Does anyone know how to transfer my data in my external drive across the disc of the DVD Installer prior to installation of Snow Leopard sanitation? Somone told me to do it this way, but I don't know how.

  I recommend strongly against from any attempt of recovery/reinstallation without a valid (and verified) backup on a different disk. As you are still able to boot the system with the installation DVD, you can

  • use Disk Utility on the installation DVD to create a full backup of your internal drive to an external
  • copy /Applications and /Users to an external drive (which should focus on 'all' critical data)

  Then comes to an attempt of resettlement.

  You can restore your data after the installation of the operating system. First make a note of bookmark, password or registration required by your system.

  Perform a full backup with time machine, then restart with your installation dvd, then reinstall the operating system

  When Setup restarts, you can restore your data with the migration wizard.

  When possible, you should do a clean install with 3rd party applications and drivers HW until the migration may or may not be compatible with the older operating system and removes the possibility of corruption of preference.

• The OSX 10.4 installation DVD can be installed on a completely wiped Mac?

  I have an iBook G3, with the type of disc loading slot. At present, it has an operating system installed. I found a DVD of 10.4 Installation on craigslist for very cheap, but I know that this type of disk requires that a previous installation of 10.3 be on the hard disk. I have no idea, and I don't want to buy the DVD to see that it does not work. Here is a picture of the disc:

  

  Can it be installed on a Mac without any version of Mac OS x on the hard drive, and if not, is there a workaround or modification that I can do to make it work?

  There is a part number on the DVD, so maybe it's a way to know if the DVD 'install' is or

  isn't wall installation or upgrade to OSX earlier. What is visible in the image, it does

  not seem to be an update for version 10.3 Panther. And a gray-label would indicate the disk

  was designed for use with a Mac specific build version only. So far, she poses as an installation DVD full.

  The iBook G3 (white and colors) do not comes with an optical drive to load per slot. Yours is a G4?

  From what I can tell by observing that the Tiger DVD install image you posted, it most of the

  not match a full installation DVD Tiger, that I still have in the official retail box.

  Mine says:

  Mac OS X Tiger includes 2 XCode

  Version 10.4 2Z691-5305-A

  If you have access to the actual DVD, try searching for the item by part number; If it is hidden

  in the picture you posted, so I can't say what I see enough search. And the numbers I do

  See are not among those listed in the database MacTracker which shows all OS X build versions.

  {Something on an installation of Tiger DVD, is the content of the disc is compatible with the capacity of a

  Media single layer; so if you need to, you could make a backup of emergency with the old style drive

  optical drive. {Later versions of OS X have more content and a double-layer disc would be required.}

  Should the cost for the DVD be really cheap and compose a full retail disk, which can be large.

  Install sites such as welovemacs and others who used to deal with the old system of out of stock

  media, sometimes, you can see what they ask if they have a few for sale again.

  This page includes pictures of the media the retail labels more old OS X install original disks:

  http://www.Macworld.com/article/2101301/advice-from-an-Apple-Tech-how-to-get-old - mac-os-x-install - discs.html

  {Even though I have a few original on DVD, the oldest media of retail OS X disks that I have is Jaguar or Puma;

  I have a tiger in the retail box & the image you show looks like an installation-in-all support Mac DVD.}

  Are you sure that your iBook is a white G3, or is this a G4? You say that it is an optical drive slot-loading;

  G3 models all had tray optical drives. I used to own a first white model dualUSB G3

  and no iBook G3 models use an optical drive "slot-loading". It was only the first iBook G4... And I have

  have a last G4 iBook model perfect condition, always close. It comes with 10.4 Tiger gray-label.

  Good luck & happy computing!

• Download XP installation DVD

  Hello!

  I recently bought Swedish edition of XP Professional service pack 2, but the installation DVD arrived the day after I left the House for ten weeks. Now I have the product key, but not DVD. Is there a legal and safe site where I can download the installation program. I tried a site torrent but there naked girls appeared and I dare not enter the Pirate Bay (not because I'm a sailor).

  Greatings of Biscay Bay!

  Steen

  Sorry, there are no legitimate download for Windows XP.  All illegal downloads on the .net are infested with malware, spyware and are seriously compromised. Carey Frisch