CSR Bluetooth Radio device works do not permanently

Similar Questions

• my bluetooth does not work it comes with a bluetooth radio device is not available

  I can not receive or send my Bluetooth on my computer comes up with an error code 43 when I try to fix it. Help, please.

  Hi Reneehoare,

  I suggest you run the fix it and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  You can also see the following articles for more information:

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

   

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

   

  I hope this helps.

• HP Envy 13 laptop: Bluetooth doesn't work is not on the HP Envy 13 laptop

  Good afternoon

  I recently bought a laptop from HP Envy 13-d004a and could not get working Bluetooth.

  Without wireless/bluetooth adapter is an Intel Dual Band Wireless-AC 7265.

  Bluetooth is not listed in the page menu settings/Windows device.

  There is no Bluetooth device listed in Device Manager.

  There is an unknown USB device (device descriptor request failed) listed under Bus USB controllers I think it is perhaps related to the problem. The State of this poster features 43 code.

  So far, I tried to uninstall and reinstall the USB devices and update drivers for USB devices. However, the USB device is unknown, with a warning on the icon symbol.

  I also downloaded the latest Intel Bluetooth driver update utility. When I run the installer, or the repair, I get the message

  "Intel Bluetooth Service (ibtsiva.exe) could not be installed. Make sure you have sufficient privileges. ». I am connected with administrator privileges when I run the installation program.

  So far all my attempts to solve the problem of Bluetooth failed, would be more appreciated all the help I get.

  Thank you

  John

  Bluetooth problem has now been resolved on my HP Envy 13-d004na notebook.

  Tonight a Synaptics SMBus driver has been downloaded and installed via Windows Update.

  After the installation of this driver, I restarted the computer.

  After restarting Bluetooth appeared in Device Manager and peripheral USB unknown displayed previously had disappeared from the Device Manager. I tested Bluetooth connectivity and am now able to pair with my Bluetooth mouse.

  Surprised, but very happy that the problem has been resolved and that the laptop now seems to be fully functional.

  Thanks again for your help.

  John

• Bluetooth doesn't work does not error: Server Bluetooth installation failure

  Original title: why does not install the Server driver Bluetooth?

  I have a HP Folio 13 running under Windows 7 64-bit.

  My bluetooth used to work, but now it isn't and I don't know why. I don't know if a driver had changed or anything. I noticed when I uninstall Intel Wireless Bluetooth or Microsoft Enumerator and restarting the computer, the installation of the bluetooth driver but it says that the Bluetooth server had no installation.

  It is not exclamation mark on any device in the Device Manager, but when I open devices and printers, there is an exclamation point next to my PC. When I ook to properties, then hardware, there's and exclamation mark near the Bluetooth server. I tried to reinstall the drivers.

  yesterday, I upgraded my OS to Windows 8.1, bluetooth works now

  I; m do not know why this happened.

  I hope that you can find out why this has happened as I prefer Windows 7 more

• SOME DEVICES WORK DOES NOT THEN STARTS TO SPARE

  I have recently upgraded to Windows 8 Windows 7 and now I'm having this problem.

  At the start of some of the features not working and not see the same in the Device Manager. As some of start, Bluetooth and webcam does not work, on another USB port isn't working and sometimes all the these do not work.

  One thing is that only USB 2.0 does not, while the USB 3.0 ports work and it is a SIGN of TILT on the 2.0 device in the specific DEVICES MANAGER. But when I turn off and turn back on, it works fine but I can't do something on the Bluetooth device or the imagery.

  My PC is DELL INSPIRON N5110. I have already updated all the drivers from the website of the manufacturer for Windows 8.

  Help, please!

  I would try to disable the quick start System.  This QuickStart uses a special kind of hibernation of driver that is not compatible with all devices and drivers that have been built before Windows 8.

  You can go to the control panel (press Windows + X to get there easily), then Power Options to disable it:

  

• Peripheral Bluetooth doesn't work does not correctly

  I have a new IdeaPad Y550P and am slot that Win7 Ultimate 64-bit. I installed a Microsoft Wireless (Bluetooth) keyboard and mouse. They work fine for awhile and then the IdeaPad abandons the connection. Get and install another MS Bluetooth keyboard / mouse and I get the same problem. I searched the site for a update driver Bluetooth and see that there is nothing available for the computer laptop everything.

  Is it possible for me to get the Bluetooth radio in the IdeaPad to continue working as it should?

  Thanks in advance,

  / Randal

  
  

• HP-15ac044TU: bluetooth doesn't work does not correctly

  I have laptop model HP-15ac044TU and my product number is M9U99PA #ACJ. I'm not able to use my music YET - M1 correctly bluetooth wireless device with bluetooth to my cell phone. Sometimes it connect, but sometimes not. so, I have to remove my paired device and fix it again. any help will be appreciated.

  Hello

  You can use OTHER Bluetooth devices? Not all Bluetooth devices are the same. Let me tell you my story: I have a Dell Bouetooth and a Microsoft Surface running Windows 8.1 RT mouse. The Dell mouse Dungeon drop and I had to reconnect at each reboot.

  For the test, I went out and bought a Bluetooth Microsoft mouse and there's always connect.

  Kind regards.

• Bluetooth Peripheral device drivers are not installed. (code28)

  Good day to you, Sir

  I USE THE SONY VAIO VGN - CR 37GN, I HAVE THE DRIVERS FOR BLUETOOTH PROBLEM DEVICES ARE NOT
  PROPERLY INSTALLED AND CODE IS 28 CAN YOU ME DO CERTAIN THINGS TO SOLVE THE PROBLEM
  THANKING YOU
  EMMANUEL

  Good day to you, Sir

  I USE THE SONY VAIO VGN - CR 37GN, I HAVE THE DRIVERS FOR BLUETOOTH PROBLEM DEVICES ARE NOT

  PROPERLY INSTALLED AND CODE IS 28 CAN YOU ME DO CERTAIN THINGS TO SOLVE THE PROBLEM

  THANKING YOU

  EMMANUEL

  chandrajeetyx,

  Have you installed the correct drivers?

• Bluetooth doesn't work is not on the new XPS 13 9350, Windows 10

  Just cannot get Bluetooth to work with any device, even if these devices work with each other.   She will see the device in the Bluetooth settings page and will get "associated with" and then "Connected" for about 5 seconds and then fall back to "paired."  Never really gets a usable connection.    Everything works well on this laptop.  I downloaded a couple of drivers from the Dell site but don't know where to go from here.  Any help would be appreciated.

  Here is how I solved this on my Dell XPS 13 9350

  1 removed my device manager bluetooth accessory (in my case it was a headset/earphone)

  2. right-click on the "Bluetooth Dell Wireless 1820 A 4.1 THE" adapter and click Update driver software.  For me, it downloaded and installed an updated (took a few minutes)

  3 reset

  4. This is probably the key bit (gleaned in a post I found on a forum of HP for a similar symptom).  GO INTO THE BIOS AND RESET BIOS TO FACTORY SETTINGS

  Without step 4, no matching rate, uninstall, etc seems to have no effect.  I guess this is because the different versions of the bluetooth driver write different/incompatible bluetooth keys in the key store, and I suppose that the reset of the bios that erases the.

  Once again I re-paired everything then worked... CLOSE.  for my helmet in particular, I also need to do this:

  5. go in Control Panel "devices and printers".  Right-click on the bluetooth accessory and select Properties.

  6. click on Services.  It takes a few seconds to refresh

  7. you should see a bunch of boxes.  For me, they were all uncontrolled!  In order to check their to activate these services (for example "Audio Sink" to get audio routed to devices 'Remote Control' to manage accessory buttons, "Hands-free telephony", to manage the micro call / voice, etc.)

  Finally (!)  I could then do a right-click on my Audio properties, go to playback devices and select my bluetooth headset (and change to the default playback device, etc.)

• Bluetooth doesn't work is not on the Satellite a series

  I reinstalled my OS (Vista Home) using available with the laptop recovery CD. Now when I turn on the bluetooth button, and then click Power On to ConfigFree it does not work. The message that appears is:

  + The follwing point switch No. +
  + Devices +.

  It is said in the Details button

  + The following may be the cause of the failure. +

  + Wireless LAN utility is active (Please close the utility).
  + Property windos network is open (Please close the window).
  + Opetion Internet windos is open (Please close the options window).

  + Where there is always a problem, pleae close all other applications and then run ConfigFree. +

  Please guide me as I could not work with my bluetooth.

  Thanking you in advance

  Hi mate,

  I recommend you to download each pilot stuff Bluetooth available from the drivers download page and reinstall the drivers, in addition, it would certainly be a good idea to reinstall the following things:

  -Configfree
  -Utility (Value Added Package)
  -WLAN driver

  Welcome them

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Calls to other devices works do not.

  Hi all, after upgrading to iOS 10 and MacOS, I found that my call on other devices does not work, the person can hear me but I can't hear them. I tried reset hard and my iCloud Add/Remove to see if that fixed it, but it didn't. Anyone have any ideas on how to solve this problem, or if someone else has the same problem.

  Hi imaxmain,

  I understand that after update of your devices, you encounter some trouble hearing callers using continuity to make or receive calls on devices other than your iPhone. I know it's nice to be able to handle calls on other devices, so I'm happy to help you.

  To start, make sure that you have correctly configured the parameters of audio output of your iMac. This article contains additional information:
  macOS Sierra: adjust the audio output of your computer settings

  Once you have verified that it is correctly configured, you can troubleshoot your settings of continuity with this article:
  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• M4C63UA HP #ABA stream: a pilot missing and 2 devices work does not correctly

  So, I recently switched to Windows (32 bit) 10... My netbook has only 32GBs so I thought that I get more space by using 32-bit and I have a lot more now.
  
  But minor issues however, I can't seem to get the touch screen to work or find the drivers for it.
  
  I also have an invalid driver; PCI encryption/decryption controller.

  

  And I also have two devices in Device Manager when windows cannot load the drivers required.

  

  For my touchpad drivers I don't see whatever it is in devices that I think might be them.

  I appreciate any help on all the above problems although 32-bit is not supported. I imagine that the factory can support 32-bit. I got some updated drivers using the driver easy, but I can't seem to update these drivers.

  Hello:

  This should be the driver that you need for the E/D PCI controller:

  This package provides the driver Intel Trusted execution engine Interface (CITY) for the laptop models running a supported operating system. The Interface of the Intel Trusted execution engine allows the Secure Boot and provides services required for the security features of platform such as Intel Platform Trust Technology (Intel PPT).

  File name: sp72335.exe

  Touchpad:

  This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

  File name: sp72339.exe

  Unfortunately, I can't help you with the problem of the touch screen.

  The graphics driver that control it.

  For the other thing of the Intel Atom, please view the hardware ID of the device.

  You can find that by clicking on the watch your screenshot Details tab, select the 3rd item in the drop-down (hardware ID) and after the string of characters that appear in the window.

• Bluetooth doesn't work does not boot camp

  I can not connect any device to mbp via bluetooth. I use windows via boot camp 10. I also installed the boot camp support software.

  I also tried Windows 8.1, but the problem is the same.

  You can associate the same device correctly on the side of OS X?

• Plantronics Bluetooth USB adapter works is not in Windows 7.

  I am running Windows 7 Home Edition 64-bit. I just upgraded from XP. I have a Bluetooth from Plantronics adapter that I use with my Plantronics Voyager 510 headset. In XP it's plug-and-play, no problem very easy to install. However, in win7 not so much. The BT from Plantronics adapter is dectected and appears in Device Manager, but appears to be missing a driver. My attempts to find a driver were unsuccessful.

  Any suggestions?

  Well found a solution to the problem travel 510 driver. The drivers are located through an update broadcom at the following link:

  http://www.Broadcom.com/support/Bluetooth/update.php

  If anyone else has problems with their plantronics BT cards, I would suggest cutting your losses and pick up the BT of Targus adapter for 30 dollars. In addition, you can add other bluetooth devices to it.