CUBE special transcoding

Similar Questions

• optimize the cube

  Hello
  I'm working on the optimization of this cube special-
  Dimensions: 9
  Dense:
  Period (19)
  Years (5)
  Scenario (49)
  Rare:
  ENT (393)
  Ch (317)
  Accounts (5100) - company wants sparse as they continue to change the dimension almost daily
  D1 (30)
  SD1 (101)
  Prod (320)
  
  I applied the following parameters:
  Updated the hours of glass
  Period
  Scenario of
  Years
  D1
  SD1
  Ch
  Prod
  Entity
  Accounts
  
  Buffers of recovery: 50 KB each. Compression: RLE
  Cache index: 10MB
  Data cache: 30 MB
  Values Missing agg: checked
  Users are complaining about calc time but also the time of recovery
  
  Please suggest connections to optimize the speed of recovery. It comes to Essbase 64 bit environment on Windows
  
  
  Q2)
  I need calculate the budget forecasts and 2012 2011 in a single script. Can I write it that way for the better times of calc?
  
  Difficulty (2012, @children (budget))
  Calc Dim (period, accounts, Prod, D1, SD1, entity, Ch);
  EndFix
  Difficulty (2011, @children (forecast))
  Calc Dim (period, accounts, Prod, D1, SD1, entity, Ch);
  EndFix

  For calc time (may be in conflict with some recovery time, but probably not):
  (1) the dynamic period and leave the statement DIM CALC
  (2) you have now is not aggregating the dense dimensions, use AGG instead of CALC. DIM.

  I bet what scenario would work better sparse - you might want to try it. Also paste the script into a sparse nonaggregate dimension.

  What are your. IND and. PAG files? Do the key cache also bigger than the. IND the. PAG is a little game - I typically 10% fat as the. PAG, if I can manage it and increment a little, but the data cache is not a panacea for the performance.

  The only way to really, really know if it will work is to try different configurations and their referring.

  Kind regards

  Cameron Lackpour

• Photo quality poor when you import the slideshow in items 10

  Hello

  I use elements and Photoshop Elements 10 on Vista.

  What I'm trying to do, this is a slideshow that I made in Photoshop in a film that I make the slide show appears as a menu item and I don't have to include a separate for importing images drive. I have sucessfully imported, added the menu marker and the drive works, but the photo quality is really crappy. When I play the slide show on its own, the pictures are very good. What Miss me?

  Thanks in advance!

  Mary

  Welcome to the forum.

  They work on several levels:

  1. A subscriber comes with a problem or issue, and then, I hope someone will have an answer
  2. A subscriber comes with a problem or issue in mind and then searches for other threads, very similar and I hope that receives the response
  3. A Subscriber has been read, looking for ideas, etc.

  In your case, it seems that # 2 worked, just as it should.

  As for your question, PrE can produce slideshows for display of DVD video, as good as it gets. Videos / commercial DVD enter into a different area, with video footage, with the movement. There, Hollywood uses a special transcoding software, which allows a lot, much more past to identify areas of movement, to transcode just the right speed for best results. Before the fact that with but two passes, in contrast to the programmes of US $500,000, composed of highly qualified experts, who have nothing other than transcoding, throughout the day. PrE is limited in this regard, but with a slideshow, it will be able to apply the higher speed (DVD-specs. are strict here, therefore, flow well higher = more high quality, DVD-video can go only so far.) Also, Hollywood uses DVD-9 (DL) so that more time can be created on a disk, to the highest permitted speed, for each segment of the video. With a slide show, the throughput will be higher than the DVD specifications. allow and by the length of the slideshow vs the disk capacity.

  Now, there are a few other considerations, such as the limited range of colors and Gamma of DVD-video vs displayed on a calibrated monitor or a calibrated broadcast monitor. Must study this limited and different color range and perhaps adjust the colors first, in Photoshop. Pre is not designed for the output of the show, so doesn't have many tools, which has PrPro. In addition, very few users PrE have a broadcast monitor calibrated for the color adjustment. Finally, even though it has produced the ultimate result, with a full understanding of the range of colors and used a perfectly calibrated broadcast monitor, unclear what will be the calibration of the monitor of the client (PC or TV). Which is perfect on a broadcast monitor calibrated would look great when installing the client, or maybe not. A Broadcast engineer can only adapt to the standards and hope for the best when the disc strikes the public. Ditto for the Audio. Who knows what can read DVD-Video "Aunt margin"?

  For ultimate results, I would create a montage with some Images, but with each adjusted slightly differently in Photoshop. Add a title, like a lower third, with the color and Gamma settings to each version, maybe variations 5, which are slightly different. PS allows you to adjust the colors and Gamma in many respects, so Explorer. Then, this timeline for DVD-video, using high quality media, the author and test it on their DVD player/TV Setup. See which version looks the best and the specificities of this title. To process the actual Images yet for DVD slide show.

  Don't forget, if you put things up ideally, they will be calibrated their system and Photoshop. Photoshop is a color managed work space, things will be, as good as it gets. DVD-Video and TV are NOT color managed workspaces and most consumers TV is out of calibration, having just the generic parameter of the factory. Nothing can be done about it.

  As mentioned above, if the reading is for a computer (not a DVD player and TV), then better color and Gamma could be achieved by an AV file and then burn that to a DVD Data disk, for delivery. However, there are still variables of the customer's computer, his monitor and even the player the software used. Play a large role in how this AV file will play for them.

  Good luck, and I wish there was an answer "relentless", on how to achieve the ultimate results, but there are so many variables involved.

  Hunt

• Select * ALL_CUBES

  I created a ROLAP cube in Oracle 11 g R1 and deployed successfully using OWB. However when I run the query Select * from ALL_CUBES shows nothing silence... so I thought that the problem could be with ROLAP so I recreated the cube using MOLAP storage and then revived the request... but unfortunately nothjing came... no idea why? How can I make my cube appear using Select * All_CUBES

  Hello

  ALL_CUBES is the view for 11g format OLAP cubes. OWB 11 g 2 is the version that deploys OLAP 11 g cubes. The release of 11 GR 1 material OWB deploys cubes specially for ROLAP in the CWM2 catalog pre 11g OLAP catalog. That's why you see nothing in ALL_CUBES.

  See you soon
  David

• Transcoding to a timeline... specials and all have started 10.00.00.00 is possible?

  Hello.

  I am regularly required to build timelines with sometimes 10-50 thirty-second promos. I need to export each promotion through the Media Encoder for delivery. Each promo begins the minute... 10:00:00:00...10:01:00:00... 10:02:00:00 etc. etc. But I need the time code on each separate file promo to start 10:00:00:00 each time (not the BITC).

  Is this possible? I can do it on root 6 Agent of content, but I'm looking forward to remove this software and use SOUL all the time.

  Thank you very much.

  Sean

  In the CC 2015 version, we have added a "Set Start Timecode" feature where you can set a custom for a given preset timecode. Just put that value to 10:00:00:00 and then to apply the preset for all outings and that should be what you're looking for.

• dspfarm-> CUBE question asked

  I have a Cube Ent instead of two.  I'm going on my setup.

  So, the question I have is with the following configuration:

  dspfarm profile 1 PSG
  Pass through codec
  Codec g711ulaw
  maximum sessions 200 software
  associate application CUBE or associate PCRS application <>

  Any good information on which used was not found.  Is it very important or will it affect my calls that need to join PSG.  Its currently configured to the CSPC. I hope that I will ever need because I'm doing everything as g711.

  Thank you

  Hello

  Associate application Cube is used with LTI transcoding based on the CUBE, associate the PCRS application for CME/SCCP based transcoding.

  You can see the following link for more details

  http://www.Cisco.com/c/en/us/support/docs/voice-unified-communications/u...

  Manish

  -Does the rate of useful messages-

• Maintenance of data Cube using DBMS_BUILD

  Hello

  I've got cube partitioned by date, with the 1 year retention period - every day a new created partition and the other removed.

  No problem with the creation of data, but I am struggling to find a way to lose the old partition.

  I'm looking for is

  1) more information on DBMS_CUBE. BUILD to help me understand how to use it to reach my goal.

  The official docs are examples of syntax, but I'm not finding in the syntax HERE to allow me to do this: http://docs.oracle.com/cd/E11882_01/appdev.112/e40758/d_cube.htm#ARPLS73464

  (I would have the cube data cycle would be a common requirement that would be required by all and so surprised that it is not explicitly covered for example).

  Is there another source of reference for the info DBMS_CUBE. BUILD that I can use to help me better understand the syntax fix myself?

  (2) or a direct help with my problem

  I found another post that addresses this specific point and gives the syntax to achieve this: https://community.oracle.com/thread/2154852

  I tried to use the technique which recommends David, but it takes a lot of times more to manage that in order to do that requires a full version of the cube and actually does not reach the goal by the removal of the partition (no change of data in the cube and the values for the target partition remains).

  The generation of complete cube takes too long, and I think that must be a quicker way of deleting a data partition, but am not able to do this.

  When I run the command based on the advice of David (see below), in the CUBE_BUILD_LOG I see the CLEAR VALUES with the correct partition identified (that's the step that almost all of the time is spent on), but nothing really changes in the data when the cube is queried,

  for example, I can query the cube for values in this partition and they stay.

  No error is returned.

  So I am very confused and do not know how to move it - any ideas?

  for example, in the example below, I'm trying to delete the partition "20131230" which is a level in the hierarchy "STD" in the "TIME_1YEAR" of the "CUBE_MNE_E_RATED" cube dimension

  I'm eager for this deletion, in the cube, all the data to date, but as above it takes a lot of time doing nothing.

  When this command is executed the data actually, relative to this day table does not exist, and so it is not true that reconstruction including date based on data it finds in the fact table.

  I'm on 11.2.0.3 Enterprise Edition.

  BEGIN
      DBMS_CUBE.BUILD('"CUBE_MNE_E_RATED" USING
                         (FOR "TIME_1YEAR"
                          WHERE "TIME_1YEAR"."DIM_KEY" IS DESCENDANT OF ''20131230'' WITHIN "TIME_1YEAR"."STD"
                          BUILD(CLEAR))');
  END;
  /
  
  

  Thank you in anticipation

  Jim

  Regd move 365 days entry windows:

  You have a window mobile day or level the relational table entry containing the 365 lines last 365 days... It seems that this would trigger aggregations on a large scale along the time dimension hierarchies assuming the definitions of month/quarter/year regular. In this case, perhaps the cube full re-aggregation may be inevitable. The cube can attempt a full build/refresh (C) from other types of charges (? for quick or otherwise Complete, F for Fast Refresh etc) are not possible.

  If today is April 4, 2014, so your input table gave April 4, 2013-April 3, 2014. The difference b/w done cube entry table b/w yesterday and today is that day = April 3, 2013 fell from the table. Month Apr 2013 with children from April 1, 2013 to 30 April 2013, this should trigger a new aggregation level months Member April 2013 and even a new Member of the month level aggregation Apr 2014 (since April 3, 2014 has now come in the picture).

  Charge of OLAP via DBMS_CUBE. BUILD

  Your best case scenario is for olap Manager do the following:

  * reloading data for affected for months because of moving window - Apr 2013 and 2014 after only... that is to say reload the level data sheet for April 4, 2013 April 30, 2013, as well as for April 1, 2014, to April 3, 2014.

  * re - aggregate affected higher level members like Apr 2013, 2nd quarter of 2013, 2013 year 2014 Apr, 2nd quarter 2014 and 2014 year alone.

  Olap perspective load or dbms_cube.build load behavior, it is not an exact match due to the fact that entry window varies every day. FAST_SOLVE is closest, in my opinion.

  A Complete (C) charge the fact:

  * Clears all data - sheets as well as aggregates

  * reloads all the data at the level sheet of the object (table/view) the input source

  aggregates the cube according to the settings/aggregation design

  A charge of FAST_SOLVE (S) for this:

  * reloads all the data at the level sheet of the object (table/view) the input source... NOTE: this refill all the data of reln. not only for the day added to the entrance... independent source updated lopped or daily added.

  * re - includes the affected/relevant part of the cube according to the settings/aggregation design

  A FAST (F) refresh the fact:

  * Load the data for the new dates only... that is will load data for April 3, 2014, but does not delete the data up-to-date lopped relational source: April 3, 2013

  * re - includes the affected/relevant part of the cube according to the settings/aggregation design... in this case: April 2014, 2nd quarter of 2014, year 2014 alone. All 2013 aggregates remain as they did because they have not been erased.

  Olap for DBMS_CUBE documentation. BUILD explains, if the cube can be built using a load of Partition (can handle more recent partitions as they appear but I guess he can't handle more delicate complexity relating to the partitions being cut at the base/start/front of the moving time window) or through refresh FAST charge (usually this needs a quick refreshment on MV to act as Cube source again without the complexity of the data will lack every day at the beginning of the input time window) then it falls on the full charge (charging data, cube of aggregates). There is a special type of load - FAST_SOLVE which is to reload all the data, but only hit reaggregate / higher levels of the cube.

  Currently, the cube seems to function according to the COMPLETE (C) charge.

  QUICKLY RESOLVE may be your Best Bet... recharge every day, placed affected qtrs/months/years only in the cube.

  ******************

  DBMS_CUBE. BUILD has many options regarding the build/refresh of capacity.

  Maybe you should try to reference the other parameters of the procedure to refine the process of generation.

  I hope this helps.

  -ERASE the partition corresponding to day being filed and also try to re-aggregation of stakeholders

  BEGIN

  DBMS_CUBE. BUILD)

  script => ' USE of 'CUBE_MNE_E_RATED '.

  (FOR 'TIME_1YEAR'

  WHERE 'TIME_1YEAR '. "" "DIM_KEY" IS A DESCENDANT OF "20131230" IN THE "TIME_1YEAR" STD ".

  BUILD)

  CLEAR VALUES,

  FIX

  )

  )',

  method => of '-S tent FAST_SOLVE refresh method

  refresh_after_errors to-online true,-refresh after errors

  parallelism-online 1-parallelism

  atomic_refresh => false, - atomic refresh

  automatic_order-online order wrong, - automatic

  Add an add_dimensions to-online true - dimensions

  );

  END;

  /

  -Reload all data, including the newly added date and aggregate/solve the cube incrementally

  BEGIN

  DBMS_CUBE. BUILD)

  script => ' USE of 'CUBE_MNE_E_RATED '.

  (

  PLUM CHARGE OF SYNCHRONIZATION,

  FIX

  )',

  method => of '-S tent FAST_SOLVE refresh method

  refresh_after_errors to-online true,-refresh after errors

  parallelism-online 1-parallelism

  atomic_refresh => false, - atomic refresh

  automatic_order-online order wrong, - automatic

  Add an add_dimensions to-online true - dimensions

  );

  END;

  /

  Rgds
  Shankar

• Number of users connected during the refresh cube activity

  I use Hyperion 11.1.2.1 and running schedule refresh activity cube by using \Hyperion\Planning\bin\CubeRefresh.cmd.
  Is it possible to find number of connected users in an Application of special planning over the Cube refresh activity running for this application?

  You can use Poster Session to display the session on the planning application.

  Concerning

  Celvin

• SSaudit for ASO cubes in 11.1.1.3?

  Hello gurus.
  
  I was wondering if someone was able to get the feature SSaudit working on ASO cube on the 11.1.1.3 version to get the generated .atx and .alg file?
  We tried, but it doesn't seem to work for us. Also, activity 'send' itself does not appear to have captured in two apps newspaper or newspapers of essbase.
  I was wondering if there is a workaround or special setting we need to do for ASO.
  PLS, throw some light, if someone knows something about it.
  
  Concerning

  SSAudit is not supported for cubes ASO and unfortunately is not record transactions.
  If you need to do something like that I suggest with Dodeca that can save sends in a relational table

• Change order number/special character artists

  I would like to know if there is a way to change the order of all the artists that begin with a number or a special character order. Currently, they are all sitting at the bottom of the list of the artist on the ipod (and iTunes) but I would like to have all displays at the top of this list.

  This is the sort order...  I think you would need to change the names of the artists so that they start with something that gets sorted at the top of the list in alphanumeric order.  For example, replace 10,000 Maniacs a_10, 000 Maniacs.

• Special keyboard keys Bootcamp-lost after upgrade to Windows 10

  I have an iMac of 2014 that was running Windows 7 with Bootcamp.

  I have upgraded to Windows 10 (using the upgrade option if windows) and everything was fine.

  After a power cut I can no longer start Windows 10 so I repaired the installation.  W10 is working now, BUT the special keys on the apple keyboard (brightness, volume, etc.) no longer work.

  I tried to re - download the software and drivers support for Win10 through Bootcamp Assistant, but he asks me if I want to delete the installation of Windows 7 (SEVEN Yes).

  Any ideas would be welcome.

  Thank you

  Download the driver appropriate for your model package specific to install Windows 7 and previous versions on your Mac with Boot Camp - Apple support on a USB2 flash drive and run setup.exe from the Bootcamp folder when it is started in Windows.

• Umlauts, special letters - problem with El Capitan?

  Hello.

  I've lost the ability to write the accents and other special characters in my American keyboard bluetooth.

  Previously, I could write the letter A when I pressed this letter on the keyboard, but also (when I pressed the button for a while) the letter A with an umlaut or an accent as well as a few other options.  There are similar opportunities with other vowels and some consonants, for example, S > ss.  Now, my keyboard is more written (in the messaging application, for example) when I press the button for a while display options for this key.

  I noticed that this happened after I did the update to iOS to all my Mac devices, although I am not sure this is related.  This Mac uses El Capitan 10.11.6.

  I live in Germany, so having this feature to switch between languages is a big problem for me.

  Anyone can shed some light on this?

  Best regards and thanks in advance for any help.

  The f

  Jeff,

  Have you tried to do an SMC reset? In the case of contrary and you don't know how please look over iMac SMC and PRAM reset , reset the SMC 2 - 3 times and then test again.

• Type a special character quickly

  Hello everyone,

  I want to type this ← special character that is an alternative to the arrow to the left.

  Is there a way to have a shortcut keyboard or another way to quickly type in what I want?

  Thank you.

  I think that there is a text replacement for default <-. You can create an if it is not on your Mac.

  If this is not suitable, you will have to use some third-party hot key programs or create a Service of Automator, which types the character (using a run AppleScript action). I can probably show you how the automator service, if necessary.

• How can I change a plan of special funding for an iPhone, program of upgrade Plan?

  I'm on a special funding for my iPhone 6 s and am stuck do not do the upgrade, although I have several iPhone from the Apple Store and pre-order 7. I'm curious to know how I can set up a program to upgrade and update my iPhone every year? I will ditch my 18 month special financing.

  You told us very little, as "special financing" could translate into hundreds of different things.

  The general answer is to repay your 6 s iPhone, then visit an Apple Retail Store or an Apple authorized reseller and buy an iPhone 7, following the upgrade program.

  Or, once you pay off your iPhone 6s and end your contractual obligation of the cellular carrier, then you can buy the iPhone 7 to the Apple store and is part of the upgrade program here.

  In any case, I think that you must pass the credit needs.

  Once your iPhone 6 is paid and without contract cellular carrier, it should be yours to sell.

• It did not work on Macbook white 2010 or 2010 MacBook pro installed in El Capitan and Yosemite respectively y at - it something special for these releases?

  Apple hardware test does not on macbook pro or macbook, 2010, 2010. Both run 10.1 and 10.10, respectively. Wielding D in power does not launch apple hardware test as advertised. s he is weaned something special to do?

  Thank you

  Alex

  For versions of model before 2013 diagnostic test uses a different method.

  Two different media cover aspects There are reasons

  Why the AHT vs diagnoses may not work in some models of the year of construction.

  And with specific systems, the recovery partition (or lack thereof).

  • With the help of Apple Diagnostics - Apple Support

  For computers shipped with OS X 10.7 or earlier, the test is on the

  Press Kit of included system disk; If you start from there to run the test.

  • With the help of Apple Hardware Test - Apple Support

  • Finding material defects: explore Ardourel & Apple Diagnostics

  Before you run AHT /Apple Diagnostics. By controlling both the software and

  distribution of material for its systems, Apple is able to optimize the two halves to work...

  http://computers.tutsplus.com/tutorials/finding-hardware-faults-exploring-AHT-AP ple-diagnosis-mac-60456

  There are some methods and ideas in the articles above.

  A reason for the question, you face, is the vintage material & macOS they shipped with.

  Good luck & happy computing!