CUCM LDAP directory

Similar Questions

• Error: The user is not synchronized in the LDAP directory.

  Hello

  I have observed that the users imported via the load utility to bulk IOM does not get incorporated into the OID (as the configuration via LDAPSync). Additionally, when you try to change a users in the identity Console give me the following error message:

  IAM-2050243: process Orchestration with id 5436, failed with the IAM-3010059 error message: change failed because the user TSEMMENS is not synchronized with the LDAP directory.

  I need a manual task for this? or is it a mistake?

  Thank you

  Hello

  Because users are not present OID, so during change it will throw the error.

  Try running the following Scheduler:

  LDAPSync Post allow provision users to LDAP
  

  E.7 Provisioning of users and roles created before enabling the LDAP LDAP synchronization

  If you create users and roles in Oracle Identity Manager deployment without LDAP synchronization and decide later activate the LDAP synchronization, then the users and roles created prior to activation of the LDAP synchronization must be synchronized with LDAP after activation. The commissioning of the users, roles, the role memberships and hierarchy, role of LDAP is obtained by these regular positions predefined LDAP:

  • LDAPSync Post allow provision users to LDAP
  • LDAPSync Post Enable provision roles to LDAP
  • LDAPSync Post Enable provision of roles for LDAP group memberships
  • LDAPSync Post Select available role hierarchy in LDAP

  Allowing a LDAP synchronization in Oracle Identity Manager - 11g Release 2 (11.1.2.2.0)

  We'll see if it creates the entry in OID.

  ~ J

• 4.0.1 4.1.1 - LDAP Directory authentication scheme fails

  Using out of the box of LDAP Directory authentication scheme that has worked well in v. 4.0.1 fails to v. 4.1.1. User authentication fails with "Invalid Login Credentials". Debugging shows that the user "nobody". Watching v 4.0.1 user shows "Admin". In addition, the "test LDAP connection" is no longer available in 4.1.1 - that's a bummer.
  
  Example 4.1 bug .1:
  4161 426774014496602 person 103 101 50 6 hours ago 0.8562
  
  Example 4.0 bug .1:
  661 3340172823117775 ADMIN 130 101 57 36 seconds ago 0.3298
  
  Anyone know if something has changed with the standard LDAP Directory schema? Or am I missing some configuration?

  Hi Julie: I suspected that maybe the question earlier and actually run PL/SQL anonymous block of doc you referenced to create ACL previously but that it either did not run as user SYS or has not committed or something. In any event, afer re-running as SYS and making sure to commit it, I now see expected line returned after you select in dba_network_acl_privileges. I run apxremov.sql to remove the recent installation of 4.1 for go ahead and execute basic install for 4.1.1 as opposed to the application of the hotfix to upgrade 4.1 in point 4.1.1. ACL entry is deleted as a result of execution of script apxremov.sql... so the block pl/sql to create the ACL entry had to be run again. Thank you, Glenn

• Integration of CUCM LDAP

  We are currently running CUCM 10.5.1 and using all users the.  We want to Setup LDAP integration, and I try to understand what services will be performed.

  Can someone inform me what services use the database of the CUCM end-user for authentication?  I guess it's only administrators who log on to the Web site and the Jabber clients.  Is there any other use of these credentials?

  Are there any other warnings should I be concerned?  A thought is that I do not want to import a bunch of accounts of service or distribution groups, so I need to put some LDAP filters.  Are there other traps that I should know about?

  If you enable access for end users ccmadmin, they would use their LDAP credentials for this, if you set UCMuser, for this as well. If you use Jabber, too.

  There is a filter by default for what to import, documentation of CUCM to LDAP synchronization is, what source directory you use, only users will be imported, you can change it if necessary.

• TMS directory against LDAP directory

  Morning,

  We intend to use a real directory like Phonebooksource.

  To connect through the AD, it's no problem, but the LDAP user has a different format.

  AD : >\>

  LDAP: CN = videoUnit, CN = Abo, CN is accounts, CN = System, CN = Apps, O = company, C = OF

  In this format, I tried a lot of.

  But nothing seems to work, does anyone know the problem?

  Greetings

  Jens

  No, not really, I'm afraid, I just need to know more precisely the type of LDAP you are trying to connect, if it's not AD... And what kind of Source of PB in TMS you try to use when you try to connect to the Directory LDAP AD, H350, H350 user directory?

  And if I understand you correctly, you are saying that you can connect successfully to say AD but not this particular LDAP that is not AD but something else... OK?

• EX 60 does not receive the CUCM phonebook directory

  Cisco EX60 is registered on the CUCM, but it does not receive the phone book. IP phones receive the directory.

  Cisco Services for user data is active and running.

  CUCM system version: 9.1.1.20000 - 5

  EX60 software version: TC6.3.1.f768649

  You must mention the URL of the directory on your EX60 in order to extract the CUCM directory.

  EX60 login go to Configuration > server directory > URL and mention of the URL in this format:

  https://: 8443/cucm-uds/users

  First, you can test by opening this URL in a browser to verify if it is correct.

• Directory of TMS on the endpoints registered CUCM TC

  Since 14.4.0 TMS version, it is possible get endpoint CUCM registered directory server to point to the TMS directory instead of the CUCM directory.

  I tried to set up, but I still can't get it to work.

  On the endpoint of TC (version TC7.1.3), in Configuration > System Configuration > Server from the phonebook,

  I set the server type MSD and the URL as http://TMSserverFQDN/tms/public/external/phonebook/phonebookservice.asmx

  When I SSH to the endpoint TC I ping the TMS serverFQDN so DNS resolution on the endpoint is apparently works.

  When I open this URL in my browser, I get a page called "PhoneBookService" with GetPhonebooks links, ResolveSystem and research

  But on the preview endpoint it works everything simply. This shows just "no directory.

  How can I solve this problem?

  A few quick questions that jump to mind are:

  1. Endpoints defined in TMS?
  2. A TMS directory is published at the endpiont in MSDS?
  3. The directory TMS has a source valid and entered in it?

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate

• Directory LDAP authentication scheme does not

  I did some research on how to use active directory for authentication and it seems pretty obvious, but it does not for me in the APEX, while trying to authenticate the Works database.

  I created a new authentication system

  System type: LDAP Directory Service

  Host: < < Directory Server Active > >

  Port: 389

  DN: < < FIELD > > \%LDAP_USER%

  Use the distinguished name exactly: Yes

  I made sure that the new authentication scheme is underway.

  What application is running and I'm trying to connect, debug displays:

  ... Authentication failed: Invalid Login Credentials < div id = "apex_login_throttle_div" > please wait < span id = "apex_login_throttle_sec" > seconds 30 </span > to log in again. < / div

  But, I ran a test database using this code below that I found on the web and it runs without exception, so I don't know my settings, domain, host, port, user and password are correct.  Y at - it a step that I forget?

  DECLARE

  l_retval PLS_INTEGER;

  l_retval2 PLS_INTEGER;

  l_session dbms_ldap.session;

  l_ldap_host VARCHAR2 (256);

  l_ldap_port VARCHAR2 (256);

  l_ldap_user VARCHAR2 (256);

  l_ldap_passwd VARCHAR2 (256);

  l_ldap_base VARCHAR2 (256);

  BEGIN

  l_retval: = - 1;

  dbms_ldap.use_exception: = TRUE;

  l_ldap_host: = '< < ad server > > ';

  l_ldap_port: = '389';

  l_ldap_user: = ' < < MY AREA > >-< < my user > > ';

  l_ldap_passwd: = '< < password > > ';

  l_session: = dbms_ldap.init (l_ldap_host, l_ldap_port);

  l_retval: = dbms_ldap.simple_bind_s(l_session,l_ldap_user,l_ldap_passwd);

  dbms_output.put_line (' return value: ' | l_retval);

  l_retval2: = dbms_ldap.unbind_s (l_session);

  EXCEPTION

  WHILE OTHERS THEN

  dbms_output.put_line (rpad ('ldap session', 25, ' ') |) ': ' ||

  RAWTOHEX (substr (l_session, 1, 8)).

  '(retourné depuis init)");

  dbms_output.put_line (' error: ' |) SQLERRM | ' ' || SQLCODE);

  dbms_output.put_line (' user: ' | l_ldap_user);

  dbms_output.put_line (' host: ' | l_ldap_host);

  dbms_output.put_line ('port: ' | l_ldap_port);

  l_retval: = dbms_ldap.unbind_s (l_session);

  END;

  Hello

  If it works in the database, perhaps it is a typing error in your frame at the APEX?

  Create PL/SQL processes "on the charge before the header' on connection and as a PL/SQL block page for this entry process:

  begin
    APEX_DEBUG.ENABLE(apex_debug.c_log_level_engine_trace);
  end;
  

  Then run application, try to login and check the debug information. Maybe you'll find some clues to solve your problem.

• LDAP to Active Directory = 'invalid login credentials.

  Hello
  
  I am looking to set up Active Directory authentication in the APEX, so I'm changing the authentication to the LDAP directory service scheme
  
  I finished the host, no port, NO SSL, etc. on the settings tab
  
  Host: IP address of the ad server
  Port: 389
  Use SSL: No SSL
  Distinguished Name (DN) string: domain\%LDAP_USER%
  Just use the distinguished name (DN): Yes
  
  However, when you try to run the application and entering my details it keeps bring "invalid identifiers.
  
  What I missed
  
  I came across the following code on another thread, but where would this go in the PL/SQL code?
  
  DECLARE
  vSession DBMS_LDAP.session;
  vResult PLS_INTEGER;
  BEGIN
  DBMS_LDAP.use_exception: = TRUE;
  vSession: = DBMS_LDAP.init
  (host name = > 'CREDPWY01SDCG01')
  portnum = > 389
  );
  vResult: = DBMS_LDAP.simple_bind_s
  (ld = > vSession)
  ", dn = > ' CN = < user name >, dc = credit, dc = com"
  , passwd = > NULL
  );
  DBMS_Output.put_line ('authenticated user!');
  vResult: = DBMS_LDAP.unbind_s (vSession);
  END;
  
  I'm not able to authenticate at all when using apex_ldap without worrying if I pass NULL for the password, or use the real password.
  
  BEGIN
  IF APEX_LDAP.authenticate
  (p_username = > "<>username")
  , p_password = > NULL
  ", p_search_base = > ' dc = credit, dc = com"
  , p_host = > 'CREDPWY01SDCG01 '.
  p_port = > 389
  )
  THEN
  DBMS_Output.put_line ('ok');
  ON THE OTHER
  DBMS_Output.put_line ('not ok');
  END IF;
  END;
  
  Published by: Rambo79 on November 5, 2012 03:44

  It is one thing to AD configuration setting, which allows or prohibits the anonymous binds. It is not on the side of the apex. Try asking your AD administrator why this is so.
  As you need a password anyway in your apex application, make sure that the password field is required / add validation, like suggested Christian.

• MaxPageSize problem/Question about Active Directory in my organization.

  Hello guys, I'm having a weird problem with Active Directory in my organization.

  Long story short:

  In my environment, the MaxPageSize value is the default value (1000), and MaxValRange also has by default (1500).

  However, in the Exchange Event Viewer, I see the existing event several times below:

  A ldap directory SRV1 Server search results. DOMAIN.COM has exceeded the administrative limit. Only the first 100 entries have been returned successfully by the search request.

  My question is: If the MaxPageSize controls the number of objects returned in a single search result, and it is currently set at 1000, why Exchange sees only the first 100 entries of each search?

  Any help would be greatly appreciated.

  Thanks in advance :-)

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Is mandantory CUCM CWMS

  I have a client who wants to use CWMS purely to the desktop sharing and control.  No audio conference is required. The customer does not CUCM for the telephone system, and they do not want CWMS to call and dial a number for audio.

  CUCM is mandatory for CWMS?

  Cisco will support a standalone CWMS without CUCM integration?

  Hello

  If you don't want to use the functionality of teleconference of the product and do not plan to import users of CUCM/LDAP and authenticate you using CUCM/AXL, I don't see why you would need CUCM.

  You will not just set up the Audio section of the solution to use WebEx Audio, and instead the system only support option "voice connection with the help of computer. You will not be able to disable both types of audio conference feature. You must have at least a permit, and in your case, it would probably be the "Voice connection with the help of computer" option.

  I hope this helps.

  -Dejan

• Cisco ISE 1.1.2.145 Admin authentication via the LDAP protocol

  I have configured the LDAP protocol and able to retrieve our LDAP directory structure. Now, I'm trying to point authentication "Admin Access" Source 'External identity', which is the new LDAP IS I created. But I couldn't find an option to authenticate locally if for some reason the LDAP configuration does not work. I learned that the ISE can automatically return to local auth as external sources Idenitity are inaccessible. How can I test the LDAP authentication with breaking them our Admin Access? I thought to open two parallel sessions, one with Super Admin account Local and one with the domain account. But I noticed that ISE communication is smart enough for the closing session/connection no matter what other sessions in different browsers so, basically, I can't open two parallel sessions the same machine to test. Suggestions? or am I missing something here?

  Thanks in advance.

  Hi Srinivas,

  Even if you configure LDAP as a source of external identity of admin access, you can always internal relief without having locked. According to the ISE user guide:

  During the operation, Cisco ISE is designed to "fall back" and try to perform the internal identity database authentication, if the communication with the external identity store has not been established, or if it fails. In addition, whenever an administrator for which you have configured external authentication launches a browser and initiates a logon session, the administrator must still the option authentication of demand through the local Cisco ISE database by choosing 'Internal' to the Selector drop-down storage of identity in the Connect dialog box.

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/user_guide/ise_man_identities.html#wp1351543

  Please see the attached screenshot by my lab ISE:

  

  I configured the admin authentication against AD, but I still see both 'Internal' and 'AD' at the time of the connection.

  I hope this helps.

  Thank you

  Aastha

• LDAP contacts and photos for jabber, ipad, iphone, and Android does not

  Hi guys,.

  I have been and get off this forum and google after all settings and configurations, but I do not receive my ldap directory in sync with my mobile devices, which means, I do not see their photos or any contact details I can IM only my contacts.

  My ipad and iphone from the newspapers, I get the following error.

  -2014-06-25 11:11:18.181 DEBUG [a32c000] - [csf.person.ldap] [bind] LDAP bind error. code =-1, msg is Can not contact the LDAP server

  My file config.xml - jabber for Jabber 4 Windows photos everything works 100%.

  I have the UC Services configured and added to my end user.

  I have the LDAP Setup on my devices TCT, tab and BOT with no luck.

  What I'm missing or doing wrong? Why it works 100% for J4W but not my mobile clients.

  Suggestions, examples or tips would be appreciated.

  Links that I used:

  https://supportforums.Cisco.com/document/101766/Troubleshooting-Cisco-Jabber-iPhone

  https://supportforums.Cisco.com/document/129841/configure-directory-search-Jabber-iPhone

  http://www.Cisco.com/c/en/us/support/docs/voice-unified-communications/Unified-Communications-Manager-version-85/113498-Jabber-LDAP-00.html

  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/iPhone_iPad/JABI_BK_I30346C6_00_installation-and-configuration-guide-for-iOS/JABI_BK_I30346C6_00_installation-and-configuration-guide-for-iOS_chapter_0111.html

  http://Warcop.WordPress.com/2013/07/08/Cisco-Jabber-and-your-XML-file/

  A configure the LDAP UC service for iPad and the directory entry BDI for mobile devices in you jabber-config. XML?

• After the implementation of Kerberos on PeopleSoft, Active Directory Auth does not work

  Hello

  We need your help to solve problems 1 question we receive many users after application PeopleSoft Kerberos SSO against AD. This problem is specific to Windows 7 PC and where the Kerberos token is not available.

  A few facts we know:

  Kerberos fails for users who are not connected to the system using AD domain (like Kerberos token is not valid).

  These users are not on AD Doamin so SSO fails, which is understandable. But - we've designed our solution in such a way - when AUTHENTICATION fails, it will trigger a Peoplesoft login screen. The user can manually provide its credentials (name of user/AD password) and authentication LDAP directory will be triggered using ad servers.

  Note: our site is enabled for SSL (HTTPS)

  Windows 7 when the person tries to connect which is outside AD domain, SSO fails (in the form of token not found)-> PeopleSoft Login sreen rises to the HTTPS-> user to connect using AD userid and password-> PeopleSoft login screen gets refreshed and notheing happens.

  Surprising - even works on Googgle Crome or if I change the http URL.

  We put in login secuity 'True' in the Web.XML for Kerberos settings.

  Here is the Fiddler trace when we click on "registration" - in area no AD.

  ===============================================================

  Request header

  POST/psp/PIMSTEST /? cmd = login & languageCd = ENG-HTTP/1.1

  Accept: application/x-ms-application, image/jpeg, xaml application / + xml, image/gif, image/pjpeg, application/x-ms-application xbap, application / vnd.ms - excel, application / vnd.ms - powerpoint, application/msword, * / *.

  Referer: https://pimstest.equant.com/psp/PIMSTEST/?cmd=start&languageCd=ENG&cmd=login&errorCode=105

  Accept-Language: en-US, en - US; q = 0.5

  User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2 .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729)

  Content-Type: application/x-www-formulaires-urlencoded

  Accept-Encoding: gzip, deflate

  Host: pimstest.equant.com

  Content-Length: 0

  Connection: Keep-Alive

  Cache-Control: no cache

  Cookie: ggnptestap1-80-PORTAL-PSJSESSIONID = KbhXRpGQ52hLJtWbbK0DJ1XGDbSJ9Wn2! 386905482; SignOnDefault =

  Authorization: Negotiate TlRMTVNTUAABAAAAl4II4gAAAAAAAAAAAAAAAAAAAAAGAbEdAAAADw is

  Response header

  HTTP/1.1 200 OK

  Cache-Control: no cache

  Connection: close

  Date: Thu, 11 July 2013 10:19:09 GMT

  Content-Length: 13010

  Content-Type: text/html; CHARSET = utf-8

  Expires: Thu, December 1, 1994 16:00:00 GMT

  Set-Cookie: ggnptestap1-80-PORTAL-PSJSESSIONID = HBT3RpGdCX1q8W51ZxTz8hpQ2bCpMFKh! 386905482; Path = /; HttpOnly

  Set-Cookie: PS_TOKEN =; domain =; expires = Thu, January 1, 1970 01:00:00 GMT; Path = /.

  RespondingWithSignonPage: true

  X-Powered-By: Servlet/2.5/JSP 2.1

  =====================================================

  Thanks for help

  Rajat

  Hi René,.

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• LDAP test page is a hidden page Apex 4.2?

  Hello
  my understanding is that, until a certain version of the Summit there was a test page link LDAP provided somewhere in the page "Edit authentication scheme" when LDAP authentication was selected.

  In 4.2.5 and above all I do not see this link anywhere, but I can still reach the LDAP test tool on page 4000:3890 if I change the URL manually.

  Is my understanding correct or am I missing something?

  Thank you

  Flavio

  Yes, it has been removed in version 4.x - currently, the question was followed through Bug 15929196 - LDAP TEST TOOL NOT AVAILABLE for APEX 4.2

  News for Apex 5 is:

  To create/edit page (4000:4495) authentication scheme now contains the button "Test ". " LDAP connection" which appears under certain conditions when the authentication scheme is "LDAP Directory". Clicking this button opens the page to Test LDAP (4000:3890) in a new window, where the connection can be tested. This page also allows to the to change the LDAP settings. The "Apply Changes" button can be used to write settings back to the authentication Scheme page.

  
  

  Bug also, mentions in a PL/SQL block as possible workaround:

  Start
  If apex_ldap.authenticate)
  p_username-online "Smith."
  p_password-online "John."
  p_search_base => ' or = people, dc = example, dc = com ",
  p_host-online "localhost."
  p_port-online 389,
  p_use_ssl-online "n")
  then
  sys.dbms_output.put_line ('Authenticated');
  on the other
  sys.dbms_output.put_line ("authentication failed");
  end if;
  end;