Cumtomising newspaper in Access.log

Similar Questions

• OHS exit ramp access logging

  If I want to disable http logging server access, can I just comment on the entry below logging in the httpd.conf file and logging will be so off?
  
  CustomLog "| / orainfra/app/product/oraforms10g/Apache/Apache/bin/rotatelogs/orainfra/app/product/orafo
  rms10g/Apache/Apache/logs/access_log 43200 "common
  
  and I hv to comment on these below entries as well?
  
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  LogFormat "% {Referer} i-> %U" referer
  LogFormat "% {User-agent} I" agent
  
  My http server goes down for any reason, as I do, because it is not able to write newspapers or something?

  Yes if you want to disable access record completely and then comment the CustomLog directive. Commenting out will not cause any trouble to your OHS. It's just that there is not any newspaper application / server access.

  No, you don't have to comment LogFormat directives. You can those leave as what. LogFormat directive is used to give a name to a format of the access log. It causes no messages get logged. You use the format of log access defined in the CustomLog directive.

  My http server goes down for any reason, as I do, because it is not able to write newspapers or something?

  Commenting on the CustomLog directive is just disable access not recording error logging. Then you should be fine. The errors will still be logged in the error log file (directive ErrorLog) defined.

  Thank you
  Shail

• How do I see the actual clients in Apache access.log ip address when front-end is a load balancer.

  Dear.

  I use ebs 12.1.3 and db 11.2.0.3 OS OUL5x64

  in one applTier, I could see the ip address of the clients when they connect to the system in the access_log but

  with the average level has 2 servers AP1/AP2 configure with a LoadBalancer in front.

  verifying the connection in the Apache log file (access_log.1410393600) we see that the balancer IP address of load.

  Please let know us if he died to set up so that I can see in file access_log which client (Ip address) connected to Server (AP1 or AP2)

  Thanks in advance.

  Concerning

  Please see (how to show the Client IP address in The Access Log when using A load balancer (Doc ID 1355549.1)).

  Thank you

  Hussein

• BlackBerry 10 recover deleted number of call (peripheral access Log) log

  Does anyone know a way to recover a number of delete call logs screen? My phone was not backup up until I deleted the number in order to restore the device is not an option.

  On older Blackberry, the newspaper of the device has been activated now ALT + LGLG. Is there a way to access the Journal of 10 Blackberry device?

  Hey Cre8tive,.

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  If the Z10 BlackBerry was not saved before deletion, then you will not be able to retrieve the deleted number.

  Let me know if you have any other questions.

  See you soon.

• access logs

  I know that newspapers windows continues every time that an account is used but where are?  Someone in my house has my password and know when this person logged in to my account would help me to determine that.

  Hi amolchan001,

  The event viewer will give you a fair idea on which the user logged on to the computer.

  Open event viewer > select windows Logs > click eventis Security> you can determine the user account that was logged.

  Security-related events:-these events are called audits and are described as successful or failed, depending on the event, as if a user tries to open a Windows session succeeded.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  For more information, see the link below

   

  Monitor attempts to access and change settings on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/monitor-attempts-to-access-and-change-settings-on-your-computer

  Hope this information is helpful

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Router access log

  I wonder if there is a way to connect all users access to the router that indicates the user account and exploitation forest timestamp.

  I've implemented orders of logging config via a server Syslog in the following way:

  devices > activate

  device #conf t

  device (config) #logging X.X.X.X (IP address of the Syslog server)

  device (config) #archive

  config (config-Archives) peripheral #log

  Device(config-Archive-log-config) #.

  Enable logging

  the size of the logging Device(config-Archive-log-config) # 200

  Device(config-Archive-log-config) # notify syslog

  However, it records only orders entered in configuration mode. I need moniter user access for the purposes of verification. I heard that this can be done using AAA server but I'm not sure. Any help to offer?

  Thank you

  Let look at a single line:

  Fri Sep 24 13:46:43 2008 10.1.1.1 cciesec tty3 192.168.15.9 stop task_id = 25 time zone = UTC service = shell start_time = 1222278403 priv-lvl = 1 cmd = show ip interface brief

  13:46:43 on 24 September 2008, the user "cciesec".

  connected to the vty host 3 192.168.15.9 to

  Router Cisco 10.1.1.1 and made it

  command 'show ip interface brief '.

  I'm not familiar with GANYMEDE + running

  Windows platforms. I run GANYMEDE + Linux

  and Solaris platforms.

• VCO 5.5.2.1 - no newspaper of system.log in the client

  I have VCO 5.5.2.1 both in the laboratory at the House and laboratory work.   The instance in the laboratory of work does not display System.log messages in the window of the VCO client.  They are recorded in the file of scripting.log very well.

  I erased my java cache, installed a fresh unit in the laboratory of work and still no newspaper. Has anyone seen this?

  Thanks for the tips

  Mike

  This is probably due to a time difference on the camera and on the computer where you run the client.

• OBIEE 11 g - access log

  Hi all
  
  where can I find the history of OBIEE 11 g access?
  Yes, I know that I can use Administration-> manage Sessions, but as far as I can understand, it shows only public sessions.
  What meetings months ago?

  Check this post OBIEE 11 g - log sessions

  You can see the log where users holding loglevel = 2

  Try to update your messages, allowing you to get answers

  Hope this helps

  Published by: Srini VIEREN on March 18, 2013 10:00

• Several newspapers-ins on iMAC, how each access log merger of their individual login?

  I am operating my Fusion of my log-in, but share the computer with my wife.  How she acess merger of its log-in?  It, at the present time, doesn't seem to be available.  Should I have it loaded into the shared file?  Once loaded, Windows Vista allows log-ins separate, but we cannot at this point in his log-in on the iMAC.

  Please notify. VMware Fusion 2.0.4 running on Windows Vista x 64 Edition

  Thank you.

  Ricklsca

  Are you talking about accessing the Fusion , or to access a virtual machine ? Fusion is installed in / applications, so any user should be able to run it. Virtual machines, on the other hand, are like documents. By default, they are in your home directory and OS X permissions prevent other users to see or use. See the Beginner Guide to VMware Fusion.

• Add user information string in access.log

  Hello

  I want to add a custom in the FMS log file string. If I play a video and I want to add a string each time when the video is played, which is somehow useful to me in the analysis of the papers of the FMS, so is there anything provided or a function in which we can just pass the string as input argument which adds it to a suitable place in the log file.

  Thank you.

  Hi Milin

  I think that by adding custom information to access newspapers mentioned possible other than what is suggested in the other post, http://forums.adobe.com/message/3005886#3005886

  If you want to display custom information when something like game, in addition to the information access journal provides then I suggest you check the plugin functionality of authorization of the FMS.

  You can return http://help.adobe.com/en_US/FlashMediaServer/3.5_Plugin/WS5b3ccc516d4fbf351e63e3d11a0d6624 34 - 7fe8.html #WS5b3ccc516d4fbf351e63e3d11a0d662434-7fe2

  The authorization plugin allows you to monitor events from server such as connect, play, stop etc and access the different fields available for these events. It also lets you record custom information when a particular event occurs by properly code written for her in the auth plug-in. We can write all the relevant events, fields and custom information to the authMessage.00.log that is created next to access.00.log.

  Concerning

  Mamata

• My administrator password does not work (I forgot not it). What should I do to access log on as an administrator?

  3 people know the password and none of us were able to get. What can be done to reset the password or to get the password to be accepted? We have no install disc.

  1. make sure that shift caps lock is turned off.
  2. try a different keyboard.

  If that doesn't help, clear the password with NTpasswd.

  Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/ MS - MVP - Elephant Boy computers - don't panic!

• The issue of logging of access control list name.

  Hello

  I've used ACL for many years and had not too many questions. I am a new client site and a project of Port authentication that we planned on using extanded access control lists to control traffic entirely open to help write the correct ACL for services using the ACL. The issue I have found is using the ACL below-> syslog logging does not show the port number which is exactly what we are after. We have not named ACL extended that record the port number as well.

  Running: Cisco IOS Software, s72033_rp (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2 (33) SXH3a, RELEASE SOFTWARE (fc1)

  IP extended Access-list-example access list

  IP enable any any newspaper
  deny ip any any newspaper

  The log output:

  Mar 22 11:23:46: % s-6-IPACCESSLOGP: the list of access-list-example permit tcp nnn.nnn.nnn.nnn (0)-> xxx.xxx.xxx.xxx (0), 1 packet

  On a normal extended access list, we get this in a log output:

  access-list 120 allow host ip nnn.nnn.nnn.nnn xxx.xxx.xxx.0 0.0.0.7 Journal

  Mar 22 09:31:46: % s-6-IPACCESSLOGP: list 120 permit tcp nnn.nnn.nnn.nnn (3874)-> xxx.xxx.xxx.xxx (5001), 1 packet

  This shows the port numbers - I was wondering what small thing that I missed on logging for what I checked: http://www.cisco.com/web/about/security/intelligence/acl-logging.html and I see that the use of the switch of newspaper should do this because it shows the port numbers in their example.

  I'm sure it'll be something simple but I can't figure it out - I searched all odd Cisco cautions for ACL named which connect to port numbers, but can't find anything easily. Just wondering if anyone else has experienced this.

  Thank you

  Z.

  For the port number appear in the newspapers, you must create the list of access as follows:

  IP extended Access-list-example access list

       permit tcp any gt 0 any gt 0 log
  
       permit udp any gt 0 any gt 0 log
  
  Hope that helps.
  
  

• Access.00.log contains no data for m3u8 streams

  I need to use the sc-bytes data contained in the files access.*.log for purposes of billing.

  The log files contain the data specified in a f4m but contains no data specified in a m3u8.

  I use a Virgin installation of AMS 5.0.1.

  What should I do to save data for m3u8 "streams"?

  Thank you

  Ken

  Are you talking about access.00.log of the MAM? If yes - then it won't record all traffic related to HTTP Streaming: HDS and HLS. You can use the Apache access logs when it comes to parsing of HTTP traffic.

• To access the log file entries in Oracle 10 g with respect

  Hi all
  How can I access log files entries in oracle 10 g (linux) by questioning... and where it is stored to the origin
  Thank you...

  user8843114 wrote:
  In fact, I do not know the difference between the log files and Audit information... are they equal?
  I know how to obtain audit information... that is to say using a table sys.aud$... is it possible to access the log files if the two above are not equal

  It really depends.

  "Log file" is a generic term. Most of the time it refers to record information in a flat file outside the database. And there are many types of log files. An Oracle database's redo log files and archived log files. An application will have its own log usually on a middle-tier server. An Oracle database can be configured to generate an audit trail in an external file or in a database table (SYS. AUD$). And there are dozens of other ways that people could use the term "log file."

  Depending on how you use the term, it may or may not be possible to access the information in the log file of the database. You will need to know what log file you were interested and where this log file. If the log file is accessible to the database, it would probably be possible to use external tables or same UTL_FILE to access information, depending on the format of the log file.

  Justin

• IOS WEBVPN problem: only the LAN access

  Hi, I have a problem with the WEBVPN configuration, the client can connect to the gateway, but it cannot reach the Internet.

  My camera is C877 with c870-advipservicesk9 - mz.151 - 3.T2

  This is my setup:

  version 15.1

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  sequence numbers service

  !

  hostname C877

  !

  boot-start-marker

  start the system flash c870-advipservicesk9 - mz.151 - 3.T2.bin

  boot system tftp c870-advipservicesk9 - mz.151 - 3.T2.bin 192.168.10.254

  boot system ROM

  boot-end-marker

  !

  !

  logging buffered 9000

  enable secret 5

  activate the password

  !

  AAA new-model

  !

  !

  AAA authentication login local_authen local

  AAA of authentication ppp default local

  AAA authorization exec local local_author

  AAA authorization network default authenticated if

  !

  !

  !

  !

  !

  AAA - the id of the joint session

  !

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-966267525

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 966267525

  revocation checking no

  rsakeypair TP-self-signed-966267525

  !

  !

  TP-self-signed-966267525 crypto pki certificate chain

  certificate self-signed 01

  quit smoking

  dot11 syslog

  no ip source route

  !

  !

  !

  dhcp client-local IP pool

  network 192.168.10.0 255.255.255.0

  Server DNS 192.168.10.1

  default router 192.168.10.1

  !

  !

  !

  IP cef

  name of the IP-server 213.205.32.70

  name of the IP-server 193.43.2.1

  inspect the IP udp DEFAULT100 name

  inspect the name DEFAULT100 rtsp IP

  inspect the IP name DEFAULT100 nntp

  inspect the IP rcmd DEFAULT100 name

  inspect the IP icmp DEFAULT100 name

  inspect the IP name DEFAULT100 esmtp

  inspect the name DEFAULT100 ntp IP

  inspect the name DEFAULT100 streamworks IP

  inspect the IP name DEFAULT100 ftp

  inspect the IP name DEFAULT100 realaudio

  inspect the name DEFAULT100 tftp IP

  inspect the IP name DEFAULT100 netshow

  inspect the tcp IP DEFAULT100 name

  inspect the IP name DEFAULT100 sqlnet

  inspect the name DEFAULT100 vdolive IP

  IP ddns update method sdm_ddns1

  HTTP

  maximum interval 28 0 0 0

  !

  IP ddns update method net_client

  DDNS both

  !

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  VPDN enable

  !

  VPDN-Group 1

  ! PPTP by default VPDN group

  accept-dialin

  Pptp Protocol

  virtual-model 1

  tunnel L2TP non-session timeout 15

  !

  !

  !

  username secret privilege 15 5 user

  !

  !

  property intellectual ssh version 1

  property intellectual ssh pubkey-string

  user username

  quit smoking

  !

  !

  !

  !

  !

  !

  !

  Crypto ipsec client ezvpn SDM_EZVPN_CLIENT_1

  connect the 108 LCD

  key to group users

  client mode

  peer

  virtual interface 2

  username user password

  xauth userid local mode

  !

  !

  !

  !

  !

  interface Loopback0

  IP 192.168.8.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  ATM0 interface

  no ip address

  No atm ilmi-keepalive

  PVC 8/35

  aal5mux encapsulation ppp Dialer

  Dialer pool-member 1

  !

  !

  interface FastEthernet0

  no ip address

  spanning tree portfast

  !

  interface FastEthernet1

  no ip address

  spanning tree portfast

  !

  interface FastEthernet2

  no ip address

  spanning tree portfast

  !

  interface FastEthernet3

  no ip address

  spanning tree portfast

  !

  interface virtual-Template1

  IP unnumbered Vlan1

  PPTP-pool peer default ip address pool

  PPP encryption mppe auto

  PPP ms-chap for authentication ms-chap-v2

  !

  tunnel type of interface virtual-Template2

  no ip address

  no ip unreachable

  IP virtual-reassembly in

  ipv4 ipsec tunnel mode

  !

  interface Vlan1

  IP 192.168.10.1 255.255.255.0

  IP access-group 101 in

  IP nat inside

  IP virtual-reassembly in

  Crypto ipsec client ezvpn SDM_EZVPN_CLIENT_1 inside

  !

  interface Dialer0

  the negotiated IP address

  IP access-group 102 to

  NAT outside IP

  inspect the DEFAULT100 over IP

  IP virtual-reassembly in

  virtual-reassembly IP output

  encapsulation ppp

  Dialer pool 1

  Crypto ipsec client ezvpn SDM_EZVPN_CLIENT_1

  !

  IP pool local PPTP-pool 192.168.10.100 192.168.10.150

  IP pool WEBVPN-pool 192.168.8.100 room 192.168.8.150

  IP forward-Protocol ND

  IP http server

  local IP http authentication

  IP http secure server

  !

  !

  The dns server IP

  P2P nat IP 192.168.1.10 pool 192.168.1.10 netmask 255.255.255.0 type

  the IP nat inside source 1 interface Dialer0 overload list

  IP nat inside source static tcp 192.168.10.252 12000 Dialer0 20101 interface

  IP nat inside source static tcp 192.168.10.251 Dialer0 1723 1723 interface

  IP nat inside destination list 100 pool p2p

  IP route 0.0.0.0 0.0.0.0 Dialer0 2

  IP route 192.168.60.0 255.255.255.0 Dialer0

  !

  logging 192.168.10.254

  access-list 1 permit 192.168.10.0 0.0.0.255

  access list 100 permit tcp any any newspaper of the range 6881-6999

  access-list 100 permit udp any any newspaper of the range 6881-6999

  access list 101 ip allow any host 192.168.10.1

  access-list 101 permit tcp 192.0.0.0 0.255.255.255 everything

  access-list 101 permit udp 192.0.0.0 0.255.255.255 everything

  access-list 101 permit icmp 192.0.0.0 0.255.255.255 everything

  access list 101 permit gre 192.168.10.0 0.0.0.255 any

  access-list 101 deny ip any any newspaper

  Note access-list 102 by vpn pptp

  access-list 102 permit any one

  access-list 102 permit esp all any newspaper

  Note access-list 102 by vpn pptp

  access list 102 permit tcp any any eq 1723 journal

  access list 102 permit tcp any any eq 9998

  access-list 102 permit udp any any eq 9999

  access list 102 permit tcp any any eq 8080 newspaper

  access list 102 permit tcp any any eq 443

  access-list 102 permit udp any any eq 2301

  access-list 102 permit udp any any eq 2304

  access list 102 permit tcp any any eq 2300

  access list 102 permit tcp any any eq 11116

  access list 102 permit tcp any any newspaper of the range 6881-6999

  access-list 102 permit udp any any newspaper of the range 6881-6999

  access-list 102 permit udp any any eq 20101

  access-list 102 permit udp host 192.43.244.18 eq ntp ntp any eq

  access-list 102 permit udp host any eq 10000

  access-list 102 permit udp host all non500-isakmp eq

  access-list 102 permit udp host all isakmp eq

  access-list 102 permit host esp all

  access-list 102 permit ahp host all

  access-list 102 permit everything all unreachable icmp

  access-list 102 deny ip 10.0.0.0 0.255.255.255 everything

  access-list 102 deny ip 172.16.0.0 0.15.255.255 all

  access-list 102 deny ip 192.168.0.0 0.0.255.255 everything

  access-list 102 deny ip 127.0.0.0 0.255.255.255 everything

  access-list 102 refuse host ip 255.255.255.255 everything

  access-list 102 refuse host ip 0.0.0.0 everything

  access-list 102 deny ip any any newspaper

  Note access-list 102 by vpn pptp

  access-list 106 permit ip 192.168.10.0 0.0.0.255 any

  access-list 108 permit ip 192.168.10.0 0.0.0.255 any

  Dialer-list 1 ip protocol allow

  !

  !

  !

  !

  SNMP-server RO community

  !

  !

  !

  control plan

  !

  !

  Line con 0

  connection of authentication local_authen

  no activation of the modem

  telnet output transport

  line to 0

  connection of authentication local_authen

  telnet output transport

  line vty 0 4

  session-timeout 3600

  access-class 106 in

  privilege level 15

  password 7

  authorization exec local_author

  connection of authentication local_authen

  transport input telnet ssh

  !

  !

  WebVPN gateway gateway_1

  interface Dialer0 port 443 of intellectual property

  SSL trustpoint TP-self-signed-966267525

  development

  !

  WebVPN install svc flash:/webvpn/anyconnect-win-3.1.00495-k9.pkg sequence 1

  !

  context_1 context WebVPN

  title "SSL VPN connection"

  color #CCCC66

  secondary-color white

  title color-#ffc800

  text-color black

  SSL authentication check all

  !

  login message "SSL VPN connection"

  !

  policy_1 political group

  functions compatible svc

  SVC-pool of addresses 'WEBVPN-Pool' netmask 255.255.255.0

  SVC Dungeon-client-installed

  SVC-Server primary dns 192.168.10.1

  Group Policy - by default-policy_1

  AAA authentication list local_authen

  Gateway gateway_1

  development

  !

  end

  Have you tried to configure your installation as described here [using a virtual model and configure ip nat inside]

  http://www.Cisco.com/en/us/docs/iOS-XML/iOS/sec_conn_sslvpn/configuration/15-2mt/sec-Conn-sslvpn-SSL-VPN.html#GUID-CA99AAF5-6ABF-4C3D-ABF9-2F56B66D076C

  See you soon,.