cursor El me salta cuando escrbo y is pierde mi trabajo

Similar Questions

• Lost of acceso del cluster Datastore iSCSI cuando uno los back switches caer al vSphere

  Hola,

  Estoy serve a vSphere en alta availability, conectado al por iSCSI storage environment. Detallo el entorno:

  Back switches Procurve 2920 connected between por ellos a trunk con back cables from FC con una VLAN para iSCSI.

  An experience past 1 G an iSCSI, cada uno conectado a uno los con servidores Proliant DL360 Gen9 red back of back ports. Con el por iSCSI initiator software from VMware.

  Storage formed por back nodos HP 4330 en cluster, cada con UN nodo StoreVitual-dependent back red puertos y cada puerto a one of the switches

  The config as he hecho Los nodos vSphere ha sido a vSwitch, con VMKernel back in the same red y las back vmnic, each of ellas activa en UN vmkernel y unnused in el otro, las following past of vmware. The balanceo politica're RR.

  TODO works correctamente, except in el momento in el as el switch Procurve 1 cae. Cuando esto happens to pierde el acceso a los data warehouses in los nodos ESX, voy al vCenter until back y en the config-> storage, the doy pestana a Rescan All, momento in el than vuelven a appear.

  ¿alguien could help me a saber porque esto happens y como lo puedo did?

  Gracias,.

  Ya hemos sown el problema, y the respond.

  Esta spend las premium MAC por un switch del puerto y por el trunk al momento apagar el local switch, esas MAC duplicadas corresponden a los vmk of vMotion. Para el trafico vMotion tenemos breakfast back redes independientes as no switch should dirty cada don't con lo than no hace falta that vean between switches. Hemos quitado esa vlan trunk del there is no tenemos el problema!

  Saludos!

• False warning - unable to connect to storage alarm

  Hola

  Recientementen of alerted he configurado the cannot connect to the storage of alarm, para as no. notifique cuando an ESX:

  Pierde conexion al storage: alert

  Pierde redundancia al path storage: WARNING

  Al degradation del way storage: WARNING

  We have received several weather sober varios/place, los esx to con mantienen the alert warning

  Background: gray

  New status: yellow

  Setting the alarm:

  ([Expression alarm event: connection of storage lost;]) Status = Red] OR [expression alarm event: lost storage path redundancy;] Status = Yellow] OR [expression alarm event: path of storage degraded redundancy;] Status = yellow])

  Details of the event:

  Redundancy degraded storage device naa.60060160363027000034c4d090c8e011 path. Vmhba1:C0:t0:L27 path is down. Touch of data warehouses: "VM_xxxxxxx."

  Reportadas cuando comprobamos las LUN paths, amendments seem todas los activas y sin problemas.

  Supongo as haya sido a problema puntial conexion por one of the paths, pero lo know no entiendo porque el not to 'auto-limpian"los los ESX cuando los caminos estan correctos again warnings. Se ha of hacer una config advanced Escalin alerted?

  MUCHAS gracias

  Saludos

  Hola mokymura,

  ES UN normal behavior. Compares lo mismo cuando tienes a grouping y pierdes redundancia of caminos, is is marcado con el WARNING pero los enlaces are themselves well encuentran.

  Este behavior is debe a vCenter as any you can recover el evento what indicates that ha vuelto al estado normal. Debido a esto hay do a manual reset of alarmed her.

  Tripped reset alarms of the event

  An alarm triggered by an event could not settle back to a normal state if vCenter Server does not retrieve the event that identifies the normal state. In this case, reset alarm manually to return to a normal state.

  Page 39 del documento http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-monitoring-performance-guide.pdf

  A greeting.

• EL CURSOR SALTA AL WRITE

  In el word o en el mail, escribo salta, what debo hacer cuando el cursor?

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Hope this information helps.

• Estoy having no problema, cuando estoy instalando any test application, is en 84% y luego me salta UN error ¨ instalaion completada, although some components opcionales respond no to han wont correctamente (6) ayuda por favor: C

  Cuando estoy instalando any test application, is en 84% y luego me salta UN error ¨ instalaion completada, although some components opcionales respond no to han wont correctamente (6) ayuda por favor: C

  Could you please restart the computer and try to install again once more.

  Concerning

  Hervé Khare

• Copy the text of the line of the cursor line

  Hi all

  I need to copy the texts of the clicked cursor line. I tried the code below, but does not. Please help for this.

  Kur = new Array;

  myDoc = app.activeDocument;

  var salt = app.selection[0].lines[0].contents;//but the alert works very well

  Alert (salt)

  Kur.push (salt);

  App.Copy (Kur);

  App.Paste (kur); done only the text in the selection

  Cursor blinked this line:

  

  Select the line and copy and paste the separate framework:

  

  Hi Selva,

  If you have a single insertion point selected, you can use this code:

  app.select(app.selection[0].lines[0]);
  app.copy();
  app.selection = null;
  app.paste();
  

  Uwe

• Insert the value in the TEXT box where the cursor was

  Hi all

  I would like to insert in a text box. at the cursor position (or replace selected text), a text.

  I am using the following script, but I can't get it to work.

  (see  .. http://StackOverflow.com/questions/5889127/insert-value-into-textarea-where-cursor-was )

  
  

  Thanks in advance

  
  

  Concerning
  

  Saverio
  

  =======================================

  My texarea point is P200_AFORMULA

  ========================================

  function insertAt (myField, myValue, startSel, endSel) {}

  If (startSel | startSel == "0") {}

  var startPos = startSel;

  var endPos = endSel;

  myField.val (myField.val (.substring(0, startpos)) + myValue + myField.val () .substring (endPos, myField.val () .length));

  }

  else {}

  myField.val () += myValue;

  }

  }

  the function call

  targetBox var = $("textarea #P200_AFORMULA"), startSel, endSel;

  targetBox.bind ('focusout/focusouthandler()', function() {}

  insertAtCursor (this, "how do you do");

  startSel = this.selectionStart;

  endSel = this.selectionEnd;

  });

  var mytext = 'PARALLEL TEXT';

  insertAt (targetBox mytext, startSel, endSel);

  }

  Jorge,

  I discovered that the problem is due to the command targetBox.bind ('focusout/focusouthandler()', function() {... })
  I tried the following solution work now and it's

  Tanks for your answer

  Saverio cordially

  =================================================================

  function insertAtCursor (myField, myValue) {}

  IE support

  If (document.selection) {}

  myField.focus ();

  Salt = document.selection.createRange ();

  salt. Text = myValue;

  }

  Support MOZILLA/NETSCAPE

  Else if (myField.selectionStart | myField.selectionStart == "0") {}

  startPos = myField.selectionStart var;

  var myField.selectionEnd = endPos;

  myField.value = myField.value.substring (0, startPos)

  + myValue

  + myField.value.substring (endPos, myField.value.length);

  } else {}

  myField.value += myValue;

  }

  }

  the function call

  insertAtCursor (document.getElementById ('P200_AFORMULA'), "TEXT ENTERED");

  }

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• cursor jump after update of the Sierra

  After update of last week to Sierra of MacOS, I noticed many times randomly my cursor will jump erratically. I noticed several times why in an application like Photoshop Adobe or Illustrator but today it happened so that in Safari. Its very rare that gives me trouble with troubleshooting myself. Maybe one, two times a day.

  Before Sierra, I have not noticed any issues with the trackpad when his flat on a desk. In the past maybe noticed a little problem here and there if on my lap or on an angle, but this small current problem seems to have started with Sierra.

  Clean your trackpad

  Cleaning of your Apple - Apple Support products

  and that you use a wacom tablet? If in order to verify that the drivers are compatible with your operating system.

• Problem of cursor or mouse

  Since the upgrade to Sierra, the cursor or the mouse does not work properly with Lightroom CC 2015.7, version "safe Sierra. It could be a problem for Adobe but Lightroom and Photoshop have been updated for Sierra and only Lightroom has the problem. Oddly enough, Photoshop works OK. In addition, the Sierra of Lightroom, 2015.7 security update, worked perfectly with El Capitan, without any problem of cursor or mouse. So I guess it might be problem Sierra or Lightroom allowing customers to loss. The Magic Mouse and the Mighty Mouse mice are problematic.

  The main problem for me is that the cursor has become limited in controlling sliders and tone curve points.

  Someone else?

  Yes, the same problems here. With the help of Macbook Pro 13 '' end 2014 on macOS Sierra & Lightroom 2015.7. Strange behavior when using the sliders and the points of the curve.

  Do not forget that what was already a problem once after a LR update - so I guess it's at the end of the Adobes.

• No cursor shine Photos on iPad?

  I have iOS 10.0.2 on all devices. I see the new slider of the gloss and Photos on my iPhone 6s - but not be on my Air iPad or iPad Mini 2. Am I missing something?

  Is the cursor on the brightness slider right?

  

• Touchpad cursor gets hard to control "woozy"

  Recently, I went back to using my Mac Pro 2009 after using a Macbook to the past two years for most. I upgraded to El Capitan first, and I decided to start a new account because I've been migrating the same account for 20 years. So all is cool enough for most.

  I had used a magic with the MacBook Pro touchpad because I hated the portable computers clean touchpad. Having become accustomed to the use of the touch pad, that I decided to use it with the Mac Pro. I use the touchpad, even for the last two years.

  Here's the problem: I have not yet identified which triggers it but what is happening is that the slider will frequently and suddenly become what I can only describe as 'under the weather', and I hope it makes sense. It becomes slow and its response and tends to overcompensate sometimes I have to be very careful and precise and slow in my movements when it's like that because if I use my hands the way I would normally be the cursor will overshoot.

  It does not have it for long periods of time, but he does not often. And it makes me a little nuts. Any ideas?

  Really?  No one has an answer here?  I'm going crazy... and now my stylus is dead, so I am forced to use the touchpad! (I can't use a mouse because of repetitive stress injury)

  If anyone has any ideas, please share!

• The random crazy cursor behavior

  I have an iMac (27 "3.5 ghz i7 QuadCore - 3 TB FD - 4 GB NVidia GTX - Yosemite 10.10.5).

  This is the mouse cursor has recently started to jump and clicking randomly. I searched the internet and this Council extensively, and then I find a lot of those who suffer from this problem, I can't find a coherent solution.

  • This happens regardless of the mouse I use.
    • It happens with No mouse and no keyboard.
  • He can't start, but starts happening after 5 minutes and gradually gets worse.
    • Think this is heat, I installed TGPro to monitor the temperature; nothing seems to be very hot.
  • I have reset NVRAM and SMC.

  Are there other causes/solutions possible for this behavior? It makes the computer completely unusable, of course.

  Thank you!

  Have you blown dust lately?

  All 3rd party extensions you are running?

  EtreCheck is a simple little app to display the important details of your system configuration and allows you to copy this information to the Clipboard. It is intended to be used with Apple Support communities to help people to help you with your Mac.

  http://www.etresoft.com/ etrecheck

  What other devices are attached?

• Non-stationary cursor

  My cursor becomes no longer the cursor that should be when you move to a hyperlink in any program (Safari, Chrome, TextEdit, etc.). There is simply no past action stationary because the actions of hover, a video player from YouTube, where pop controls during a flight over a video, also can't.

  I followedNo. Mouse Hover functions in El Capitan & already deleted my

  ~/Library/Preferences/com.apple.universalaccess.plist
  

  Resolved, I have the joy Wow‑Pen WP‑012 USB Optical Mouse which when toggled to a generic mouse, worked. The mouse driver must be to blame.

• MacBook pro 2 logon screen starts with no arrow cursor and must be restarted

  2014 Macbook Pro screen Retina 2 13 "opening session starts with no arrow cursor and must be restarted once every five tests.  When the computer reboots, message appears asking you if it must open programs that had started to load or cancel.  It is a recent problem that does not occur two months ago.  Once restarted, everything seems to be OK.  That is what it is?

  Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.