Problem of cursor or mouse

Similar Questions

• Persistent problems with the Magic Mouse

  I have persistent problems with my Magic Mouse. He often stops followed (i.e. the cursor on the screen does not move when I move the mouse), or the input button on malfunctions (i.e. I don't click and drag, or cannot right click, or when I click on something and that you hold the button down it doesn't "stick").

  I called Apple and they took me through all the troubleshooting steps (reset the SMC, PRAM, etc.) and I finally get a new mouse. I got a new and have exactly the same problems!

  The ONLY thing that solved the problem by restarting the computer, or logging in and out. But the problem then begins again after anywhere from a few minutes to a few days (the most often within hours).

  Any ideas?

  Here is more information in case it is useful:

  • I plugged a wired Logitech mouse, and to my surprise, it also does not work. I thought that the problem was related to the wireless/Bluetooth connection, but this clearly isn't.
  • I have a Wacom tablet attached to my computer, and it works very well, no matter if it has connected (via USB dongle) wireless or wired (via USB).

  There seems to be something wrong with any particular software/system control the mouse.

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Problem of wireless optical mouse.

  I have two problems with wireless optical mouse opportunities now encountered on my computer laptop windows 7, they will no longer work correctly on this laptop, tested both on another computer and they worked very well. The first time it happened with the mouse 1 it has been installed correctly and completely, the Device Manager also confirms, the issue that happened after I removed the usb receiver to move my laptop (done this before without problems) when I reinserted the receiver and turned on the mouse the mouse was completely insensitive. I changed batteries, uninstalled and reinstalled the drivers and still the same result, tried the mouse and the receiver on another computer and it worked fine.

  I then used a wireless mouse that worked well backup up to now and I'm having exactly the same problem after exactly in the same circumstances. A mouse by logitech and the other an i.t.works (ironically)

  I am confused now and any help would be appreciated as my computer laptop touchpad died a few months ago and not worth having repaired or replaced. I'll try and answer any questions you have for me better than I can.

  Correction of a problem. uninstalled all drivers mouse number two and reinstalled four times... Fourth time that the mouse works fine. I will try a number of mice when I get my hands on it. Must have been a problem with the driver moved.

• Problem on not correct mouse pointer position

  My Client OS: Windows Vista Ultimate SP1 x 64

  I use Vmware Workstation 6.5.1 build-126130

  I invited two OS: Windows XP Professional 32-bit SP2, Windows Server 2003 Enterprise SP2 32-bit

  The problem I found is:

  When my client OS (vista x 64) have the default DPI setting (default scale: 96 DPI), and the display resolution is 1440 x 900.

  My two guest OS (Windows 32-bit XP and Win2003 32 bit) works well and no mouse found problem.

  But when I change the DPI setting as custom DPI 134 scale, and display resolution is always 1440 x 900:

  1. in guest OS Windows XP 32bits: mouse problem has occurred!  The mouse pointer is visible, but the position of the pointer is not TRUE!

  You can do like this to find this problem: right-click on the desktop (in the guest OS) to open the menu on the right, you will find the mouse pointer problem.

  2. in the 32-bit guest OS Win2003: mouse problem onlly when the mouse pointer from the guest operating system is close to Client operating system.

  How to solve this problem? I'm short-sighted that I can't put up with the default settings. (All things is too small, especially the font size)

  Hi, do you understand you this, I had the same problems, the pointer of the mouse poster, but poniter is not in the location that is clicked - the click action occurs approximately 2cm below and to the right... but your question about DPI made me relise its do with DPI settings...

  You have to click with the right button on the VM Workstation shortcut, select Properties, compatibility, and then select DISPABLE DISPLAY the SCALING ON HIGH DPI SETTINGS... It fixed the problem for me with vista x 64 as host and XP Pro / OpenSuse as guests.

  The thing I don't understand is when the host is vista 32 bit, it was not the problem...

• Problem with cursor - will switch to a link

  I was hoping that someone could help with this.

  My dad's Mac has a problem with the cursor. It uses the trackpad and when you try to click on a link, it will not work. The arrow does not change into a symbol of the 'hand' and it can not click on it. This makes it almost impossible to navigate. It seems that the links are not recognized. He tried to use a mouse via the USB port and nothing changes.

  He tried to update to El Captain but he can't because the mouse doesn't work. The simple, restart or turn off / suite does not work. The problem persists on Chrome and Safari.

  Any help appreciated, thanks.

  Hi Irbea,

  Thank you for using communities of Apple Support. I see that you are the dad had problems with clicking on the links on his MacBook. These are some great troubleshooting steps to try to solve this problem. I am happy using.

  According to the steps that he has already done, I'll try to test this in safe mode. This will allow his MacBook making some changes and prevent the loading of the software. Please follow these steps to safe mode:

  Try safe mode if your Mac does not end commissioning

  While you are in safe mode, you may notice that the MacBook is running slower or the screen flashes.  No worries, it's normal.  Read this article for more information about this:

  Graphics performance limited in recovery of OS X or in safe mode

  If you continue to have problems trying to test in a new user:

  How to test a question in another account on your Mac.

  Have a great day!

• Connection problems. Cursor "turns" without touching the keys. Keypad lock. Tracpad disconnects. Need to close and restart before both work again. Any guidance will be appreciated.

  CONNECTION PROBLEMS.

  CURSOR "Runs" AFTER I TOUCH a BUTTON AND THEN the KEYBOARD LOCKS AND TRAC PAD DISCONNECTS.

  NEED TO SHUT DOWN I HAVE MAC AND TURN IT BACK ON AND KEYBOARD WORKS OK.

  IT IS AN INTERMIITANT BUT AN ANNOYING PROBLEM AND I WOULD GREATLY APPRECIATE SOME GUIDANCE.

  Thank you

  Hello

  Please, do not type in capital letters, which is considered yelling that I am sure that you are trying to do.

  Have you had the opportunity to read If your Apple wireless mouse, keyboard or the trackpad will not work as expected - Apple Support ?

• I had a problem of cursor jump earlier but am its answer key, I've been hacked

  I was wondering why the cursor was jumping and then it suddenly fixed itself surprising was my pirate internet?

  Hello

  -You are using a desktop computer or a laptop?
  -What operating system is installed on your computer?

  Maybe your computer can be updated mouse drivers may have solved the problem, or if you have a laptop with a very sensitive setting touchpad, you can accidentally moving the cursor to another location. It's a pretty common problem on laptops because of your wrist or Palm touching the keyboard as you type.  You can change the settings for sensitivity on the touchpad (see the user manual that you have not mentioned the operating system).

  The issue can also be caused by an add-on not necessarily a virus.

• Problem with cursor high Pavilion dv8 bar (treble/bass control)

  I've had my Pavilion dv8 for a few months now.  A couple of months after I got it, I started having problems with the slider treble/bass control.  He would sporadically pop-up and begin to change the treble or bass at irregular intervals.  He also unplug randomly my wireless connection.  I thought that this may have something to do with the cursor being dirty, but after several attempts at cleaning, there is still a problem.  At first, it was just a little annoying, fixed by clicking the mouse or pressing the upper button of the internet, but now it of REALLY boring, popping up even as I write this post.  Someone at - it solutions?  Am I the only one who experience this issue?  I have not seen all other positions.  Is "slider thing" the right word?

  Thanks for any help,

  Alex

  @ Snooker and everyone.

  Here are youtube videos, I started a new thread in the material, it becomes too long.

  http://h30434.www3.HP.com/T5/notebook-hardware/DV8-and-HDX-series-OSD-pop-up-solution/m-p/816295#M51177

• Cursor of mouse and black connection screen

  My Toshiba laptop running slow night. So I pulled out everything and just rebooted. It is loaded properly until he got to the login screen. It is really not in the login screen, but it has a black screen and only a mouse cursor. It stops just before the login screen. I read in other forums that people go in safe mode and fix the problem. I went into all the methods available, including advanced modes. And have the same results. Black screen and a cursor. On the SafeMode but it has safe mode in the corners of the screen.

  There is no way to tell if Windows is unbelievably corrupted - probably due to malware - or if there is a hardware problem (hard drive probably) reading your post.

  You know better - if you don't have a fairly high level of computer skills, it is time to take the device to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place. If the computer is still under warranty, of course you would like to contact Toshiba technical support.

  If you want to try to help yourself, here are some things to try:

  1. start with a Linux Live CD. I like Knoppix, but there are others. This has two advantages: 1) if the system works, you can back up all the data that missed your last backup by copying to an external hard drive. and (2) with the machine running Linux allows to determine whether the problems are caused by software or hardware. If the machine is unbearably slow and/or Linux cannot run correctly, you know that the hardware is at fault. If the machine behaves perfectly under Linux, you know that the software (Windows) is at fault.

  2. Once you've got your data, if Linux is running correctly I would always test the hard disk and RAM to make sure that the material is solid.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  3. If the material is bad, replace the defective components. Since it is a laptop, you must determine whether it is worth spending money on it based on the age and the initial cost of the laptop. If the laptop is less than 3 years and it's just a bad hard drive, it would be interesting to replace the drive. If the laptop is 5 years old and it is the motherboard, it is not.

  4. If the material is good, do a clean installation/restore as long as the plant. Uninstall unwanted/outdated/trial software. Upgrade to XP Service Pack 3 and make all Windows updates. See how the machine works now. MS - MVP - Elephant Boy computers - don't panic!

• I have a problem with scrolling of mouse working on its own.

  Original title: in Windows 7, how can I stop popups, scrolling & other activities when I do click on the mouse.

  I recently moved from XP if it is not a problem.

  (1) while I read a website or a Word doc & move the cursor out of the way, it opens up the popups for no matter what cursor passes over, distract from what I'm trying to do.

  (2) in Word, when I try to highlight something to change or clear, somehow the cursor goes into scrolling on its own & does not allow me to highlight what I want.

  Basically, I would turn the mouse in what it was on XP because the "intuitive" nonsense is not help. If I want to see the popup, I can always right click. I have need it automatically sends me garbage.

  Y at - it a setting that I have not been able to find? I was well as the mouse settings and tried various combinations, but this feels like a more basic configuration question. If so, how should I do?

  Thank you

  Earl

  Thanks for your help with this.

  For some reason, the mouse was activating stuff (pop ups, etc.) when I checked precisely not to do.

  I tried what you suggested. What seems to have worked replaces the mouse. I had an arrangement to use a single set of keyboard/monitor/mouse with 3 computers, requiring the use of a mouse with the old pins instead of USB. I'm trying to do with 2 units of mouse and it seems fine. Don't know why, but I'm satisfied.

  Thanks again,

  Earl

• problem of cursor mkstore is going haywire - 11.2.0.4

  Hi all

  I had the need to automate a task, which includes creating a portfolio of Oracle and adding credentials. However, I noticed something of very very weird.

  When I decide to createCredential, the cursor will haywiere and I can't use the modules Perl or Python expect. The cursor, product \x08\x08\x08 \x08\x08\x08 \x08\x08\x08 without end.

  Same thing happens when you want to list the credentials.

  I'm really stuck on how to automate this, again sending the password to the portfolio.

  Thanks in advance for any help:

  Jan S.

  Here's how to reproduce standard command-line:

  [oracle@bin]$ mkdir /u01/app/oracle/product/11.2.0/db_1/admin/wallets Pei

  [create oracle@bin]$ orapki wallet - wallet $ORACLE_HOME/admin/portfolio - pwd ORACLE1234-auto_login]

  Oracle PKI tool: Version 11.2.0.4.0 - Production

  Copyright (c) 2004, 2013, Oracle and/or its affiliates. All rights reserved.

  [oracle@bin]$

  [oracle@bin]$ mkstore - wrl $ORACLE_HOME/admin/cases - createCredential TNSTEST tnsuser password1234]

  Tool Oracle Secret Store: Version of the 11.2.0.4.0 - Production

  Copyright (c) 2004, 2013, Oracle and/or its affiliates. All rights reserved.

  Enter the Wallet password: this-> where the mouse pointer goes haywire

  [oracle@bin]$ mkstore - wrl $ORACLE_HOME/admin/walletss - listCredential]

  Enter the Wallet password: - > the same problem.

  I see this with the help of Python package pexpect:

  < pexpect.spawn object to 0x7ebbd0 >

  version: 3.3

  command: / mkstore

  args: ['mkstore', '-wrl', ' $ORACLE_HOME/admin/portfolios ', '-createCredential', 'TNSTEST', tnsuser', 'password1234']

  researcher: < object pexpect.searcher_re at 0 x 803250 >

  buffer (100 characters): "\x08\x08\x08 \x08\x08\x08 \x08\x08\x08"

  before (last 100 characters): ' Version 11.1.1.7.0\r\nCopyright (c) 2004, 2013, Oracle and/or its affiliates. All rights reserved.\r\n\r\n'

  After: "Enter password wallet:'"

  game: _sre. SRE_Match object to 0x7fd440 >

  match_index: 0

  ExitStatus: None

  flag_eof: false

  PID: 14638

  child_fd: 3

  closed: false

  timeout: 30

  separator: class ' pexpect. EOF' >

  logfile: None

  logfile_read: None

  logfile_send: None

  MaxRead: 2000

  IgnoreCase: false

  searchwindowsize: None

  delaybeforesend: 0.05

  delayafterclose: 0.1

  delayafterterminate: 0.1

  Hi all

  Curiously, when I create the wallet using mkstore instead of using the orapki, then I have no ptrouble my task automation.

  Small seems to be a few propblems with the creation of credentails portfolio created with orapki?

  I'll have to go back to the docs.

  Sincerely

  JPS

• Use of the JRE instead of JInitiator causes problems of development of mouse for Oracle Forms

  Hi all
  
  We run Oracle Forms application based using JRE instead of JInititor.
  
  (1) the application is run on an individual laptop with Windows XP SP3 as an operating system.
  (2) with the help of oc4j of Oracle Developer Suite 10.2.0.1.0 to run the application
  (3) JInititor is more used and JRE version 1.6.0_26 or JRE version 1.6.0_27 used to launch the application. It works very well.
  (4) the browsers used to access the applicarion are IE8 and Mozilla Firefox 8.0.1
  
  Questions:
  (1) cannot have the focus of the mouse on an item. Even when the cursor seems to be in another element, for example after ctrl + E, point B article content watch editor has (which is the first on the form).
  (2) the LOV on any item shows what brings the LOV on section (first one on the form).
  (3) we are forced to use the keyboard to access the respective item all the time.
  
  Can anyone suggest a solution to this problem?
  
  Kind regards
  Aparna

  HELO,

  You, normally I think shoud upgrate to the version of forms 10.1.2.3,.

  François

• Problem with cursor - cursor is not where it should be when it is used

  Hello

  E/s hope someone here has had the same problem and knows why it happens.

  This keeps happening on my laptop and desktop, when I open Photoshop CS4 all goes well with the cursor, which means that I have to place the reticle of the cursor is where the brand/brush/line/pen will draw from. Then after an hour or two of work when I place the cursor, the actual location of selection fall below the line of sight of the cursor, over 10 to 20 pixels below. This makes it very difficult to be precise. It happens with Tablet as well as with the mouse. Y at - it a keyboard shortcut, I am struck accidentally? any help is appreciated, it's driving me crazy.

  Aloha,

  e ~.

  This came several times in this forum:

  http://forums.Adobe.com/message/2195086#2195086

  http://forums.Adobe.com/message/1544973#1544973

  etc.

  Please consider doing a search of the forum before posting.

  Rotation of the screen modes (pressing the key F three times) should correct the problem.