Cursor flashing after restart ESXi

Similar Questions

• After restart ESXI Virtual Machine back to start

  I have an a bit Esxi 4 Virtual Machine but he is the one who each time to restart VmWare machine system begins to start, if I put a file or install software after restart all software and data are cleaned of VmWare and I have to reinstall all, why?

  This Virtual Machine is a migration of a real machine.

  Welcome to the forums

  There is an explanation why this can happen.

  1 VM start after reboot of the host:

  Look under the tab of host - start/stop the Virtual Machine configuration

  See if this virtual machine is enabled to start when the start host

  Disable this if you do not want that it

  2. all changes on VM ignored after reboot

  Right-click the virtual machine and choose change setting

  Take a look at the hard drive options, it can be set to independent - not persistent

  Uncheck independent or select persistent

  Please attribute points by clicking on correct/good

• Stuck cursor flashing after "successful installation".

  I went and bought and assembled a personal server to learn ESXi (Tyan MB on VMWare HCL and speced out with 2-8 core AMD proc, 32 GB of Ram, 1.5 to 4 disks) I can't use RAID as it is, but I can live wiothout than learning. Yes, I have invested a LARGE amount of personal money in this!

  After a painstaking hardware configuration on 2 days, I finally pulled above the server had no error with the material, so I installed ESXi. The installation went well without problem. I rebooted, came to the config box, made a few changes to the nextwork settings, and then I think I told him to do something like re-initiallize, I don't remember because I can't go back more!

  When the system is restarted, I got a cursor blinking... that will sit there for hours, no drive or network activity. I tried to reinstall or repair the istall repeatedly with the same result. He finds right after initial start-up as the bios checking, CPU, disks, RAM... then BAM, right to a blinking cursor.

  Thinking maybe it was my readers, I jumped into a disc of Windows Server 2008 R2. I booted from it, she began to install it, it see all 4 of my readers and I went through and re - configure all four drive and deleted all partition is VMWare. I ran the installation and Windows Server set up and works great. So I think that maybe corrected a problem. No, same thing. I even went so far as to format the disk to boot via Raid tool. Yet once... do run install and it ends with "Successful Installation" reboot... blinking cursor.

  This server has been proven as is... and of course, it seems to be no erros material, so ANY help would be much appreciated!

  I'd install ESXi on a USB flash drive, a destination of installation entirely taken in charge. 1 GB or more be done. More is not better, because it won't use more than 1 GB. ESXi extends RAM so he has very little written on the flash drive.

  You must run from a hard disk, if you have defined as ACH or SATA but NOT of RAID controller. I would like to disconnect all except 1 player you sure it's the first disc of the sata channel listed in the BIOS.

  Forum - VMware communities forums upgrade notice will be upgraded the weekend of December 12. The forum will be in playback mode only the Friday 10 December 18: 00 PST until Sunday December 12 2 AM PST.

• ISCSI Lun gone after restart ESXI-home

  Hello

  I have 2 hosts 5.1 ESXI and QNAP 1 for iscsi storage.

  When I restart a host, a logical unit number is gone (other Lun 4 is available).

  I have the following procedure to resolve this problem:

  # esxcfg - volume - m "vmfs_label_name".

  and then refresh data warehouses in my configuration.

  What happens after each reboot the ESXI host.

  As I say... the other 4 LUNs with the same configuration do not have this problem.

  How can I fix?

  THX.

  esxcfg-volume - m "vmfs_label_name".

  Using esxcfg-volume-M

  M must be capital because it would be persistenet to reboot

• ESXi 5.0 - do not save the changes SD. changes after restart

  Try to solve problems with USB passthrough and needing to make changes to the configuration. Whenever a change is made, it is destroyed after a reboot.

  After digging around the shell, it seems to me that the system uses local.tgz configuration instead of/bootbank/state.tgz file. Ive brought changes, and each time I checked these files. In the esx.conf file I see that nothing changes on the file local.tgz but it does on the state.tgz file. This may not mean anything, and I could look at this all wrong. I confirmed that backups are spend the hour + 1 min and I made manual backups with the script/sbin/auto - backup.sh.

  One thing to mention is that when I do edit and run the auto - backup.sh I see that it lists the changes, and I see that it is what I guess it is in the file local.tgz.

  I read a number of different ways to this address, but none seem to be able to help.

  I have attempted to copy the file state.tgz on the local.tgz file and change the permissions on it. To restart, local.tgz file returned to the date that was the 13th but the state.tgz file remains to day it seems.

  I think I should be able to point just sort the system starts on the state.tgz file but I don't know if this is possible / should already be the case / makes sense given that we use an SD card to begin.

  I read in this document http://www.vm-help.com/esx41/adding_files_to_state_tgz.php that if you use an SD card, it will start on the local.tgz file.

  I used this guide http://store.vmware.com/store/vmware/en_US/DisplayProductDetailsPage/ThemeID.2485600/productID.28435970

  to see if I could adjust the location of the file... scratch that change does not persist after a reboot.

  I think that the only way I could solve this problem is to start on an iso of linux and to make changes.

  Any ideas on how to solve this problem or there at - it a way to indicate to the synchronization local.tgz and state.tgz system?

  Thank you.

  I got the problem solved.

  For all those who need assistance on this I hope this helps:

  Found that when under the configuration of host-> advanced if USB devices are passthrough value, they will not be monitored by the usbarbitrator service. This service allows for the virtual machines to use USB devices.

  I could not change it because the system does not update the SD card when configuration changes are made.

  Two options:

  Edit the file esx.conf on the SD card

  or

  Re-install ESXi

  I went with option 1.

  used this post

  How to disable Passthrough ESXi my conclusions

  Ubuntu iso desktop to live starting in the system.

  From there on, I was able to edit the files and restart ESXi. This fixed my issue.

• How can I get VMs to automatically restart after you restart ESXi 4?

  How can I get the VMS to automatically restart after you restart ESXi 4?

  I read and read and try things such as VMware tools etc.  Never, it works on Windows and FreeBSD, tools or not.  What Miss me?

  Thank you!

  You can do in ESX configuration.

  Select ESX / Configuration / VM StartupShutodown

  Activate (default is disable) and select the boot order.

  I also suggest to stop the comments on the same menu.

  André

• HP Pavilion p6210y: Office flashing after upgrade Windows 10

  I have a flashing desktop (goes black and office) after upgrade to Windows 10.  Once connected, it is fine for about 10-15 seconds, then it starts flashing. I couldn't do anything - click on anything except CTRL-ALT-DEL to go to the Task Manager.

  I did the upgrade 2 x already. Before my first attempt, I do nothing with my PC - I did not update the driver. When I arrived the office flashing after improvement, I panicked and immediately brought back to Windows 7. I was able to get to the window of recovery during the period of 10-15 seconds just after the connection. Fortunately, he returned to Windows 7.

  After the first test, I read a little about the similar problem and so I tried some of the proposed solutions - update the drivers on my PC, to disable reporting services Windows (all on 10 to win), to try to go to Safe Mode.

  So I tried again. I updated all the things I can to update (for most drivers) before the upgrade. Do you have PC Clean up. I had the office flashes again. It's the same thing. So while they are flashing, I tried to disable the windows reporting services that is very difficult to do with the Office of flashing. He did nothing clearly. So I went in Mode without failure. After starting in safe mode, I got the normal screen for about 5 seconds, but a blue window quickly flashed and then the desktop on Mode without failure just turned black, only the visible cursor.

  So, I rolled back to Windows 7 new.

  I don't have a lot of things/programs on my PC that I uninstall programs right away if I know that I will not use. I do scan of cleaning/Virus from PC on a regular basis.

  Information about my machine:

  HP Pavilion p6210y

  Windows 7 Home Premium, 64-bit

  Video card: NVIDIA GEForce 9100

  All the suggestions/help will be very appreciated.

  The only thing that solved the issue is reset my machine while keeping my personal files.

  I've never understood what really caused it.

  Thus, after the upgrade when the screen is flashing, I have reset the PC.

• HP envy 15 t-j100: screen went white and caps lock flashing after update bios!

  Update my bios to the latest version via app HP support and after it restarted the screen are empty and the caps lock flashing! What can I do about it?

  Thank you for visiting @omidmiri.

  Here on the Forums of HP's Support, you have access to many members of the community with solutions and suggestions to help. I understand that you have a problem with a black screen and the Caps Lock LED flashes after a BIOS update.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops.

  Please try to manually perform a BIOS recovery, as follows:

  1. Turn off the computer.

  2. Plug the laptop using the power adapter.

  3. When the computer is always off:

     1. Press on and hold the Windows key and the B key at the same time and then press in and hold the power button on the laptop for a second.

     2. Release the power button and the keys.

  By following these steps, the BIOS will reach the EFI partition in order to recover the BIOS to the latest known version of the BIOS from the hard drive.

  Source: Documentation computer won't start not and Emits a LED or beep Code .

  If this does not work, please use the above original document to calculate the number of flashes and troubleshoot accordingly.

  If you think this post has helped you, would help others joining and looking for a solution or you just want to say well done, please click the button accept as Solution or Thumbs Up.

  I would like to know how this happens. If you need assistance, I would be more than happy to continue to help!

  Have a great day!

• want to m6 sleekbook: screen flashing after windows update

  After the update windows 8.1 and later to win 10 screen flashes all the time between desktop screen and blue, already install all updates of HP with the intell and Windows safe mode - the same situation, all reinstalled video drivers by myself, but still no result,

  is it possible to solve this problem without getting windows to the previous version? or reinstall the entire system is the only solution?

  Hi @nazik_UA ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY m6 Sleekbook and issues with a screen flashing after an update.

  Here is a link to put the laptop in Safe Mode. This occurs in safe mode?

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  If this did not help, you need to reinstall the operating system.

  I hope this helps.

  Thank you.

• After restarting windows and then no error in config/system is finally windows starts successfully with no problems quo. __

  "windows couldnot start because the following file is missing" c:/windows/system32/config/system.
  This message appears at the first start, but when I press ctrl + Alt + Delete, restart windows and then no error in config/system does finally come windows starts successfully without problem usually. I searched on the internet that all solutions are given if windows XP does not start. But in my case after restart only a single window loads successfully. I'm dubious before using the recovery console.
  Please help everyone,
  no case I found the solution to this particular problem.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else. If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  
  Never, never, never start with the support engineer technical 'expert' who are hired by Microsoft to implement the KB307545.  You are likely to be in for a frustrating waste of time and might just make things worse.

  Always, always, always start with a chkdsk with first error correction.

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Windows XP NOT reinstall USB controllers after restart

  I am running windows XP. My laptop stopped grateful hardware plug-and-play connected via USB and began asking drivers to be installed. I tried with the software that came with them (a mouse and a keyboard, and a flash player), but it does not work either.

  So, following the instructions of a forum, I uninstalled the USB controllers. After restarting the computer, the controllers were not resettled and windows keeps looking, without success, drivers for the "new hardware", or controllers that it has detected.

  Thank you in advance for any help offered!

  If you know you are material to pc's internal (chipset), or if you do not, go to run,.

  type: material location Msinfo32, conflicts/sharing, get the numbers of chipset (intel is like

  D845) or similar. Once through, out, visit the website of mfg (Intel, Amd, etc.), downloads, type youre

  numbers, getting the lateset for chip youre, usually its "chipset installation utility. This software gets

  XP drivers and installation, that includes the USB controllers.

• Windows XP NOT automatically reinstall USB controllers after restart.

  I am running windows XP. My computer stopped grateful plug-and-play hardware connected via USB and asked drivers to be installed. I tried with the software that came with them (a mouse and a keyboard, and a flash player), but it does not work either.

  So, following the instructions of a forum, I uninstalled the USB controllers. After restarting the computer, the controllers were not resettled and windows keeps looking, without success, drivers for the "new hardware", or controllers that it has detected.

  Thank you in advance for any help offered!

  You have posted a question of Windows XP to a group of Vista?

  USB support / drivers are installed with your hardware chipset driver, although maybe an internal cable made lose (assuming that you have a desktop computer)

• Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  I left by mistake a USB in the port when I restarted my computer (Windows 7).

  Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.

  How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?

  Thank you.

  Tried that, but it did not work.  Finally got and IT guy come and it took him 3 1/2 hours to repair.

  Need a bootable floppy which has then repairs itself.

  Lesson learned.  Have an available for each computer startup disk.

• Windows 2012 standard r2 in vsphere 5.1 shows the black screen after restart. But the video works in safeboot

  Hi I restarted recently a r2 2012 in esxi 5.1 windows machine managed by vcenter. After restarting the machine is black display screen. In safe mode without problem with video.   I tried the troubleshooting as advised in https://support.microsoft.com/en-us/kb/2897632 method. but only the first update (Windows8.1 - KB2887595-v2-x 64.msu) is able to install in safe mode.

  Someone can help me. ?

  Thanks in advance

  Hello Arjun,

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• Smartphones blackBerry RED LED STOPS FLASHING AFTER 10 MINUTES

  Hello

  I did that my phone is set to LED flash when arrive the SMS texts. And she flashed continuously until what I read my texts up to yesterday. Now it stops flashing after 10 minutes. Is - anyone no why this would have happened? I took the battery and restarted it, but nothing works. I want it blinks continuously until I read the msg as before.

  Help, please!

  Hello RPIGOTT and welcome to the community of BlackBerry Support Forums.

  I save your BlackBerry data and empty your profiles database.

  If you need the BlackBerry Desktop Manager you can download it here.

  KB23680 will show you how to back up your data.

  KB10167 will show you how to clear the database of profiles

  After you have cleared the database, you will have to reconfigure your settings of your ring.

  Let me know if you need more assistance.