Windows 2012 standard r2 in vsphere 5.1 shows the black screen after restart. But the video works in safeboot

Similar Questions

• Windows Update: 1 or several updates made a black screen after restart

  So I have this problem for like 3-4 months ago... You all a long history, he gets to that: an update of specefic is originally that when I restart, the computer still works, but the screen is all black. Not even a light down there!
  Someone knows this problem?
  The update that I am sure that all this is cause:
  KB929729 (a security update for Microsoft .NET Framework, version 1.1 SP 1) - I think this is the one, but could be one of these schools:
  KB957000 KB952714, KB929735 - all these are just regular updates for vista x 64-vista systems

  I have the laptop to fix where I bought it. They said that the problem has been resolved, but it didn't. Well, the computer worked as if after I came, but after a Windows Installer update, the system crashed again with black screen.
  Fortunately, I was able to use an ERD to do a system restore to before installing the update.

  MY LAPTOP SPEC. :
  Windows Vista, home Edt. (SP1 has not been installed now, but had SP1 when the 1st problem started)
  Processor Intel Core Duo CPU 2.4 GHz
  4 GB of Ram
  NVIDIA Geforce 9650 GT

  OK, I'm pretty sure it's KB929729 (a security update for Microsoft .NET Framework, version 1.1 SP 1)
  She is marked as an important update, hope that I can live without it?

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• G62 b90 - ev: black screen after Windows loading

  Hello everyone, as you can see by the title I get black screen after loading of Windows at the same time as everything else works (hard drive of fans lights and sounds). I've tried several things, I read on troubleshooting thread, memory, diagnosis, diagnosis of hard drive, delete and change put the Rams, disconnect the battery and ac and keep the power button for 30secs hurry the ac without the battery but nothing. I also tried to use a monitor with hdmi cable but I get a blue screen when I try with the monitor. Also what happens during a format so I can't even through safe mode. IM really waiting for your answers and in the hope of a solution. Thanks in advance!

  Just because you use the key F11 to restore to factory does not mean that the recovery partition itself is not altered.

  Suggest you try instead the recovery discs or take it to the shop for advanced diagnostics.

• Aspire R7 572 G having a black screen after windows update 8.1. What should I do

  Hi all

  IM wondering, anyone having this problem before, Im of the problems with this black screen after startup, it happened yesterday I think microsoft needs to have updated some drivers rendering my black screen after startup. Initially, I thought it was my SSD, but it turns out that I can't get into Safe Mode.

  I read more info on this problem related to the other PC and try the preferred method of 'disabling' drivers Intel GMA HD. It worked, however, this means that the main driver is now reduced to a graphics card video standard with vram limited.

  I tried to roll back and even redownloading and reinstalling the intel driver in version VGA_Intel_9.18.10.3215. The blackscreen after boot have yet taken place. I missed something?

  This is an old version of Intel drivers.

  Try this, after uninstalling the old pilot Intel:

  http://global-download.Acer.com/GDFiles/driver/VGA/VGA_Intel_10.18.10.3316_W81x64_A.zip?acerid=63519...

• I lost my laptop screen after trying to set my display properties. I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it. What gives?

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  "Ineedafix" wrote in message News: * e-mail address is removed from the privacy * .com...

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  Start the computer in safe mode (press F8 continuously immediately after power and don't worry beeps when you press the button) and let it boot without a network.  Once there right click on the desktop and then click Properties.  Click settings and the value of the monitor mode (640 X 480) VGA or SVGA (800 X 600).  Accept the changes and restart the computer.  You should have a mediocre screen, but you should see it now.  Download and install the appropriate drivers for your video card in the laptop to the web site of the manufacturer of the laptop.  Install the drivers and then you should be able to set the display of the laptop to the correct native resolution for your computer monitor (must be in the documentation of the laptop).

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Windows Vista does not boot, black screen after "windows loading files...". »

  I have a laptop HP Pavilion dv2000, it came with windows vista, so I don't have a boot disk. When I try to start it, it will say "windows loading files...". "with a bar, once the bar is loaded it will say microsoft Corp. (with the copyright symbol) and another bar with a bar made up of three small bars of loading through it, once that is done, it will show a black screen. I have installed recent updates and I can't access the restore mode or security system.

  Hello

  The possible fix is the same that you can not boot the system currently.

  You need to make a computer repair/restore on another disc, borrow a friends Windows disk.
  or buy one from the manufacturer of the system. See the methods in BOLD above which also shows how
  a repair/recovery disk which is bootable.

  It may not be repairable by a user and the help of a real store of the computer (no leeks and peaks at)
  a BestBuy or other BigBox stores) or Support from HP is required.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black screen after entering the password to open Windows Vista

  I need help for vista windows Desktop to appear. All I get is the black screen after I get my password

  Aziz I apologize not responding earlier! In fact, I had to do was reboot the pc! I wish I knew exactly what it was that I did!

• Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

  recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

  Kind regards

  DP - K

• Black screen after the windows login

  Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

  -Task Manager is able to open when the screen is black (shows explorer.exe running)

  -J' have the drivers on the HP support site

  -laptop is HP Pavilion DV7 3024ca

  You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

• Black screen after the attempt to upgrade to windows 10

  I was trying to upgrade windows 7 on a laptop HP Windows 10. The first attempt was via the white windows logo in the taskbar. This attempt was interrupted, probably accidentally turned off the button wifi trying to move the computer. The second time I tried to use windows ten upgraded Installer. I did the usual download and installed up to 99%. He remained on the installation of 99% during the night and the next morning without change. I turned off the computer and he made a series of updates before shutting down for good. When it starts again, it has a black screen but the cursor is there and movable. I tried in safe mode for the repair and restoration of the system, but it did not work. I tried to reset the BIOS to default, but does not. I try to leave the computer turned off for an extended period of time disconnected from the internet to see if that helps. The last attempt to start, windows 7 seems to start but then ends up on the black screen and I held down the power button to stop it. I'd rather upgrade to windows 10 if possible, but if cannot then if can go back to windows 7 will be enough. It worked great on Windows 7 before trying to upgrade, so there is no problems with the computer.

  Hi Chris,

  I'll be happy to help you with the problem you have with black screen.

  The problem may occur if the video drivers are not updated.

  What is the model of your HP computer?

  I suggest you follow the suggestions by Sharath Srinivasan replied on August 7, 2015, the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Please reply with the results, we are happy to help you.

  Thank you.

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Black screen after the Windows Logo

  I have a black screen after windows with no crusor logo and no keyboard work, I just tried all mentioned in the forum, but all of them are just useless happens just after I shutdown or standby or standby extended

  I use windows 7 ultimate 32 bit with the latest drivers & updates

  Hello

  What is the code of Bug_Check of BSOD?

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Check the code from Bug_Check to Faultwire as shown in the above troubleshooting link.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black screen after upgrading to Windows 10

  I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

  can help me, thanks

  Bill

  Hello

  I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

  I suggest you refer to the suggestion of Sharath Srinivasa on August 7^th, 2015:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.