MSHTA.exe

Similar Questions

• I have several mshta.exe running processes on my computer

  Mshta.exe is listed in the task manager at least 14 times. I close them and they come back. Anyone know what it is, or why its running so many times, and what I can do about it? thanx

  I had a similar on my wifes computer problem after an ifestation Trojan horse got into his system.

  I am running xp home with service pack 3.

  I put end to the largest part of the instance of mshta.exe in Task Manager so that the repressive would work quite well to fix.

  I did a search for the mshta. * which yealded multiple copies, some with version behind numbers. I deleted all but one of:

  c:\windows\system32\mshta.exe

  c:\windows\servicepackfiles\i386\mshta.exe

  The in the folder system32 was 45 k and the one in the service pack files was 29 k I went in the Service Pack folder and copied mshta.exe.

  Then I put end to all instances of mshta.exe in the Task Manager.

  Then I went in the system32 folder and pasted the file by replacing the infected file. So far, everything is ok. If I have problems I have reload service pack 3.

• XP operating system with several iterations of mshta.exe in the Task Manager

  Last week, I saw several iterations of mshta.exe in my task manager. I don't know what it generates, or why the request is not closed properly

  Hi GFar74,

  MSHTA (Microsoft HTML Hypertext Markup Language > Host Application is a process that is running.) The HTA (HTML application) file, usually MSHTA charge once. HTA application must be running and then ends when the application ends.

  This problem may occur if a Windows system file is missing or damaged.

  Method 1: Run the SFC (System File checker) Scan. To do this, follow the steps below

  With the installation of Windows XP in the drive disc

  un) Click Start, click principally made programs, click Accessories, and click command prompt of

  (b) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If the problem persists, this could be an activity of the virus

  Method 2: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Log file of NOD32 which can help diagnose the problem with svchost.exe, WScript.exe, mshta.exe and windefender and update please someone help does not!

  HHmmmm bears ok I will answer your questions, but I don't really see the relivence of them for the progs anti, spy, virus, malware are not the problem.

  (1) a little more than two or three weeks ago or not.

  2A) about two weeks ago.

  No. 2B) I don't buy anti progs that do not work. Why would I? He did not set the blocks just prob the random load IE 8 to a maleware site addresses.

  (3) I got the updated version of Avast for almost two years. He simply blocked addresses saying something was trying to use svchost and WScript mshta.exe to attempt to load IE to a maleware site. I disabled Avast but since the installation of NOD32 if she does not interfere.

  (4) I don't remember what I used before I think it's Norton or macafree but I don't know about two years ago, I had the computer taken, wiped and reinstalled windows and they gave me Avast for free.

  (5) Yes, I tried Norton and Macafree, and they do not work to correct the problem. I uninstalled them well and they are no longer on my computer.

  (6) no they were not preinstalled.

  If you're going to ask me to do a system restore it will not help I already tried. Useless program when you can't use it. I tried several times with different dates, even in safe mode. I already ran on Microsoft Live Onecare, MSRT, Fix and MSE. I have spybot, malwarebytes, superantispyware, synematic and have tried them all. Nothing can solve the problem. Now NOD32 blocks the random addresses loading IE but it is very annoying seeing this thing pop up constantly. The only thing that it does not stop is when I use IE occasionally it will load a location for a Wal-Mart gift card, but I've just close it. If I use a different prog or any it constantly blocks the random addresses loading IE. I don't have IE loaded. Yes I have popups blockers, but it does not block another page being loaded on the card gift wlmart site. everything else works well.

  Please don't give me no matter what more links to the help pages for Microsoft because I already looked through them all and tried a lot of useful advice and none have worked. What I really need Bear is a set of instructions on what or the files to search posibly containing a script that gives orders to the system files to try and load IE maleware sites. I need to know where to look, what I'm looking for and how to rewrite or erase the command or script. Probly get rid of some files HKLM or commands too if there are orders as well. I'm sure you'll tell me its probly in both registry keys. in any case if you can help with a set of instructions on how manually enter and take care of the problem that would be great.

  I have seen the manual of instructions on how to repair scvhost.exe but I'll not go messin' and delete this file cause I know that you need so that windows run. I'm sorry for the poor fools who go on Ehow and follow the instructions. in any case if you can help it would be greatly appreciated I don't have the money right now to put this thing in the shop with Christmas around the corner and all. Peace!

  bear oppss sorry I forgot to say of windows has been completely updated in time and yes I was able to connect to windows update and defender update as well before that happens, but now I cannot connect to a, but can connect to anywheree else apparently on microsoft or other juice of sites not not both.

• 8600 pro: HP Officejet Pro 8600.exe Association

  I accidentally made the association to open the file for HP Officejet Pro 8600.exe it self.  Where are stored the information of the association.  I don't find it in the registry.  Uninstalling and reinstalling were without help.

  Hi @Gus50310

  Try these steps and let me know how it goes:

  1. Open Control Panel and click programs.
  2. Click on "default programs.
  3. Click on "Messiaen a type of file or Protocol with a program.
  4. Locate and double-click on the HTA extension, and select "Microsoft (R) HTML Application Host".
  5. If this is not an option, click on more, scroll down and click "find another application on the PC.
  6. Navigate and select "C:\Windows\System32\mshta.exe".

  Now confirm the change and check for the difference.

  Hope that helps,

  Shlomi

• HP Printer Wizard error open

  I have a HP M6 (AMD 10-4600) running under 64-bit Windows 8.  I installed the drivers for my printer (HP8E6293 (HP Officejet 7500 E910).  When I try to run the HP printer Assistant, my system try to open it in Windows Internet Explorer, how I "ERROR: content_folder" followed by "error in Script."  How it works as an executable?

  Hello

  Try to open the Control Panel, then go to programs.

  Click default programs.

  Click associate a file or Protocol with a program type.

  Find the .hta extension in the alphabetical list, and then double-click it.

  Select Microsoft (R) HTML Application Host. If you cannot locate this option click on more Options and try to find this option in the list.

  If you do not see this request click find another app in this PC.

  Navigate to C:\Windows\System32 , and then select the mshta.exe file.

  Now try to open the HP Officejet 7500 icon and check for any change,

  Shlomi

• Cannot open the Officejet Pro 8600 software in Windows 8.1

  I have 64-bit Windows 8.1.   I installed Officejet Pro 8600 e-all-in-one-made N-911 using OJ8600 - 1315.exe.   The printer and the software worked fine in Windows 7.   Windows 8.1, the printer works well wirlessly.   It prints, scans, and copies without problem.   I can use the printer window to start scanning and copying.   However, I have an icon on the 8.1 Windows Start Page that says Officejet Pro 8600.   When I click it, it opens a window labled HPSolutionsPortal.hta - Microsoft Visual Studio.  I don't get the Officejet software where I can control the resolution of the scans and files generated by the printer.   How can I access the HP Officejet Pro software?

  Ein

  From the control panel select programs, then select default programs.

  Click associate a file or Protocol to a specific product type.

  Locate the prefix .hta , double click on it, click More Options and select the Microsoft (R) HTML Application Host instead of the selected Visual Studio.

  If you can not find this option in the list of scrool to the end and click on watch for another file on your PC.

  Navigate and select C:\windows\system32\mshta.exe.

  Confirm the changes and check for the difference.

  If you see yet another type of error, install the hotfix by following the steps for Windows 8 below:

  http://support.HP.com/us-en/document/c03640384

  Kind regards

  Shlomi

• "Receive the error message" Microsoft (R) HTML Application host has encountered a problem and needs to close, etc. "when you access user accounts

  Original title: I can't access the accounts of users (XP).

  I can not access (XP) user accounts.  I get the message: "Microsoft (R) HTML Application host has encountered a problem and needs to close etc.."  The APPname is mshta.exe. I have this msg when I click on anything in the user accounts.

  1. What is the problem?
  2. what should I do to fix this?

  Hello Eric_984,

  Thank you for the question!

  It is disheartening to know that have problems you with user accounts. "As I understand it, you get an error message" Microsoft (R) HTML Application host has encountered a problem and needs to close etc. "when you access user accounts.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  Error message when you try to open the item user accounts in Control Panel on a Windows XP-based computer: "Microsoft HTML Application host has encountered a problem and needs to close."

  Answer to us if you are having problems with user accounts or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• How can I fix Jscript - Windows XP, IE 7

  Error message "Jscript is not configured correctly. "Repair and try again" when you try to install Adobe software. Windows XP service pact 2 and Internet Explorer 7.

  Error message "Jscript is not configured correctly. "Repair and try again" when you try to install Adobe software. Windows XP service pact 2 and Internet Explorer 7.

  Open the Registry Editor (start - run - Type "regsvr32 jscript.dll" - entry.) This solution is for you to re - register the dll file).

  Of course you can also fix this error by yourself. Please organize these command lines to make a line (Repair_IE.bat) batch and then run it.

  REM = Launch the batch file =.

  Rundll32.exe advpack.dll DelNodeRunDLL32 C:\WINNT\System32\dacui.dll
  Rundll32.exe advpack.dll DelNodeRunDLL32 C:\WINNT\Catroot\icatalog.mdb
  regsvr32 setupwbv.dll
  regsvr32 wininet.dll
  regsvr32 comcat.dll
  regsvr32 shdoc401.dll
  regsvr32 shdoc401.dll/i
  regsvr32 asctrls.ocx
  regsvr32 oleaut32.dll
  regsvr32 shdocvw.dll/i
  regsvr32 shdocvw.dll
  regsvr32 browseui.dll
  regsvr32 /I Browseui.dll
  regsvr32 msrating.dll
  regsvr32 mlang.dll
  regsvr32 hlink.dll
  regsvr32 mshtml.dll
  regsvr32 mshtmled.dll
  regsvr32 urlmon.dll
  regsvr32 plugin.ocx
  regsvr32 sendmail.dll
  regsvr32 comctl32.dll /i
  regsvr32 inetcpl.cpl/i
  regsvr32 mshtml.dll /i
  regsvr32 scrobj.dll
  regsvr32 mmefxe.ocx
  regsvr32 proctexe.ocx mshta.exe /register
  regsvr32 corpol.dll
  regsvr32 jscript.dll
  regsvr32 msxml.dll
  regsvr32 imgutil.dll
  regsvr32 thumbvw.dll
  regsvr32 cryptext.dll
  regsvr32 rsabase.dll
  regsvr32 triedit.dll
  regsvr32 c:\windows\system32\dllcache\dhtmled.ocx
  regsvr32 inseng.dll
  regsvr32 iesetup.dll/i
  regsvr32 hmmapi.dll
  regsvr32 cryptdlg.dll
  regsvr32 actxprxy.dll
  regsvr32 dispex.dll
  regsvr32 occache.dll
  regsvr32 occache.dll/i
  regsvr32 iepeers.dll
  regsvr32 wininet.dll /i
  regsvr32 urlmon.dll/i
  regsvr32 digest/i
  regsvr32 cdfview.dll
  regsvr32 webcheck.dll
  regsvr32 mobsync.dll
  regsvr32 pngfilt.dll
  regsvr32 licmgr10.dll
  regsvr32 icmfilter.dll
  regsvr32 hhctrl.ocx
  regsvr32 c:\windows\system32\inetcfg.dll
  regsvr32 trialoc.dll
  regsvr32 tdc.ocx
  regsvr32 MSR2C. DLL
  regsvr32 msident.dll
  regsvr32 msieftp.dll
  regsvr32 xmsconf.ocx
  regsvr32 c:\windows\system32\ils.dll
  regsvr32 c:\windows\system32\msoeacct.dll
  regsvr32 wab32.dll
  regsvr32 c:\windows\system32\dllcache\wabimp.dll
  regsvr32 wabfind.dll
  regsvr32 oemiglib.dll
  regsvr32 direct
  regsvr32 inetcomm.dll
  regsvr32 msoe.dll
  regsvr32 oeimport.dll
  regsvr32 msdxm.ocx
  regsvr32 Dxmasf.dll
  regsvr32 laprxy.dll
  regsvr32 l3codecx.ax
  regsvr32 acelpdec.ax
  regsvr32 mpg4ds32.ax
  regsvr32 voxmsdec.ax
  regsvr32 danim.dll
  regsvr32 Daxctle.ocx
  regsvr32 lmrt.dll
  regsvr32 datime.dll
  regsvr32 dxtrans.dll
  regsvr32 dxtmsft.dll
  regsvr32 vgx.dll
  regsvr3

• Unable to connect to the internet after the removal of system tool virus

  A computer running Windows XP Media Center Edition Version 2002, Service Pack 3 has got a virus System Tool which I believe I deleted using the key of activation and then run Malwarebytes' Anti-Malware.  On reboot, the system tool icon was still in the system tray, so I ran Norton 360 to remove unwanted registry files.  He got rid of the icon in the system tray.  I also then removed the Malwarebytes software.  Please note that, while I was removing the virus, I was able to connect to AOL so that in mode safe mode with networking.  Finally, who has stopped working.  The Malwarebytes software has been downloaded on the infected computer with a flash drive from a computer with working internet.

  I cannot now connect to the internet with Internet Explorer 8 or AOL (under standard or secure modes).  When you are trying to connect with IE8, the message reads 'Internet Explorer cannot display the web page' and when I run the diagnostic tests, it indicates there is a problem with the modem and/or router.  These devices are, however, both the work that there are other computers connected to them and they work.

  I tried Microsoft solutions are answers to a similar question.  Unfortunately, none of them worked in my situation.  They have been in accordance with the following:

  No doubt...

  What happens when you try to connect to the Internet?

  What is your version of XP, the version of Service Pack and IE?

  What method did you relieve your system of affection 'Antivir Solution Pro' (how confident you are that you got rid of him)?

  Generally, any part of this procedure is necessary after removing Antivir Solution Pro (a well documented removal procedure would have included the steps to cancel Internet connectivity issues).  I would get my infected system and try the procedure you used to see how it works.

  If, when you try to connect with Internet Explorer, you see something like:

  Internet Explorer cannot display this webpage
    
  The most likely causes:
  You are not connected to the Internet.
  The Web site encounters problems.
  There could be a typing error in the address.

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your Internet disabled in certain situations.
   
  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to start the network settings of Internet control panel applet properties, connections.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

  Obtain an IP address automatically

  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Also, I typed cmd in the start run box and the command-line entered ipconfig enough and ipconfig/renew.  This is also not rectify the situation.

  For your assistance, the following is a copy of a part of the file that I thought that may be applicable after that I typed in miscinfo32 in start, run box:

  Summary of the system:

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  System FIELD name
  System manufacturer Dell Inc.
  Dimension of the model 8400 system
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz
  A04 BIOS Version/Date Dell Inc., 10/01/2005
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  CHAMP\steve user name
  Eastern Daylight Time zone
  Total physical memory 1 024,00 MB
  Available physical memory 534,65 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Swap file space 2.40 GB
  Paging file C:\pagefile.sys

  Network card:

  Name [00000001] Broadcom NetXtreme 57xx Gigabit Controller
  Adapter Type Ethernet 802.3
  Product Type Broadcom NetXtreme 57xx Gigabit Controller
  Installed Yes
  ID of device PNP PCI\VEN_14E4 & DEV_1677 & SUBSYS_01771028 & REV_01\4 & 1D7EFF9E & 0 & 00E0
  Last reset 23/03/2011 14:51
  Index 1
  B57w2k service name
  IP 192.168.1.102
  IP 255.255.255.0 subnet
  Gateway IP 192.168.1.1
  Active Yes DHCP
  192.168.1.1 DHCP server
  DHCP lease expires on 2011-03-24 15:22
  DHCP lease obtained 23/03/2011-15:22
  MAC address 00:11:11:CB:96:8 D
  0xDCFF0000-0xDCFFFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\b57xp32.sys (7.73.0.0 built by: WinDDK, 181,75 KB (186 112 bytes), 1980-01-01 01:00)
   
  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 23/03/2011 14:51
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
   
  Name [00000003] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 3
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:11:11:CB:96:8 D
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
   
  Name [00000004] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 4
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 10/08/2004-07:00)
   
  Name [00000005] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 5
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 10/08/2004-07:00)
   
  Name [00000006] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 6
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 10/08/2004-07:00)
   
  Name [00000007] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 7
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 10/08/2004-07:00)
   
  Name [00000008] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 23/03/2011 14:51
  8 index
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 10/08/2004-07:00)
   
  Name [00000009] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 23/03/2011 14:51
  Index 9
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  16:4 MAC address: 20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
   
  Network adapter 1394 name [00000010]
  Adapter Type Ethernet 802.3
  Product Type 1394 network adapter
  Installed Yes
  V1394\NIC1394\9103858423C01 PNP device ID
  Last reset 23/03/2011 14:51
  Index 10
  Service name NIC1394
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 52:df:35:27:59:E5
  Pilot c:\windows\system32\drivers\nic1394.sys (5.1.2600.5512 (xpsp.080413 - 0852), 60,38 KB (61 824 bytes), 10/08/2004-07:00)
   
  Name [00000011] Miniport Wan WAN (ATW)
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (ATW)
  Installed Yes
  ROOT\NET\0000 PNP device ID
  Last reset 23/03/2011 14:51
  11 index
  WANATW service name
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00:03: 8A: 00:00:15 of MAC address
  Driver c:\windows\system32\drivers\wanatw4.sys (8.3.0.0, 32,80 KB (33 588 bytes), 2005-02-23 22:12)
   
  Name [00000012] Symantec Network Security Miniport
  Adapter Type Ethernet 802.3
  Type of product Symantec Network Security Miniport
  Installed Yes
  ROOT\SYMC_SYMIMMP\0000 PNP device ID
  Last reset 23/03/2011 14:51
  12 index
  Service name SymIMMP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:11:11:CB:96:8 D
  Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)
   
  Name [00000013] Symantec Network Security Miniport
  Adapter Type Ethernet 802.3
  Type of product Symantec Network Security Miniport
  Installed Yes
  ROOT\SYMC_SYMIMMP\0001 PNP device ID
  Last reset 23/03/2011 14:51
  13 index
  Service name SymIMMP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  16:4 MAC address: 20:52:41:53
  Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)

  Network Protocol:

  Name MSAFD Tcpip [TCP/IP]
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 16 bytes
  Message size maximum 0 bytes
  Message Oriented No.
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports shipped data Yes
  Supports graceful closing Yes
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  Name MSAFD Tcpip [UDP/IP]
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 16 bytes
  63,93 Message size maximum KB (65 467 bytes)
  Message Oriented Yes
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast Yes
   
  Name RSVP UDP Service provider
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 16 bytes
  63,93 Message size maximum KB (65 467 bytes)
  Message Oriented Yes
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption Yes
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast Yes
   
  Name RSVP TCP Service provider
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 16 bytes
  Message size maximum 0 bytes
  Message Oriented No.
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption Yes
  Supports shipped data Yes
  Supports graceful closing Yes
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] SEQPACKET NetBIOS name 3
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] DATAGRAM 3 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2}] SEQPACKET NetBIOS name 0
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2]} 0 DATAGRAM NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] SEQPACKET NetBIOS name 1
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] DATAGRAM 1 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2}] SEQPACKET NetBIOS name 2
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2]} 2 DATAGRAM NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] SEQPACKET NetBIOS name 4
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] DATAGRAM 4 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] SEQPACKET NetBIOS name 5
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] DATAGRAM 5 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.

  WinSock network:

  File c:\windows\system32\winsock.dll
  Size of 2.80 KB (2 864 bytes)
  Version 3.10
   
  File c:\windows\system32\wsock32.dll
  Size 22,00 KB (22 528 bytes)
  Version 5.1.2600.5512 (xpsp.080413 - 0852)

  Summary of Internet Explorer:

  Version 8.0.6001.18702
  Build 86001
  Ask the path C:\Program may Explorer
  English (United States)
  Active printer Dell AIO Printer A920, winspool, Ne04:
   
  Level of 128-bit encryption
  Disabled Access Manager
  IEAK install not

  Internet Explorer Versions of files:

  Actxprxy.dll 6.0.2900.5512 96 KB 2008-04-13 20:11:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Advpack.dll 8.0.6001.18702 126KO 08/03/2009 04:32:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Asctrls.ocx 6.0.2900.5512 112KO 2008-04-13 20:08:58 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  browselc.dll 6.0.2900.5512 62KO 2008-04-13 13:03:24 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Browseui.dll 6.0.2900.5512 KB 1 001 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  cdfview.dll 6.0.2900.5512 148 KB 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Comctl32.dll 5.82.2900.6028 603 KB 2010-08-23 12:12:04 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Dxtrans.dll 8.0.6001.18702 211KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Dxtmsft.dll 8.0.6001.18702 340KO 08/03/2009 04:31:44 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  iecont.dll not available not available not available not available
  iecontlc.dll not available not available not available not available
  Iedkcs32.dll 18.0.6001.18968 379 KB 10/09/2010 01:58:03 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Iepeers.dll 8.0.6001.18968 180KO 09-10-2010 01:58:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Iesetup.dll 8.0.6001.18702 70 KB 08/03/2009 04:32:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  ieuinit.inf not available 56 KB 2009-06-29 04:40:16 unavailable C:\WINDOWS\SYSTEM32
  Iexplore.exe 8.0.6001.18702 624KO 08/03/2009 14:09:26 C:\Program may Explorer Microsoft Corporation
  imgutil.dll 8.0.6001.18702 34KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Inetcpl.cpl 8.0.6001.18968 1 435 KB 10/09/2010 01:58:06 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Inetcplc.dll 6.0.2600.0 108KO 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Inseng.dll 8.0.6001.18702 93KO 08/03/2009 04:32:46 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  MLang.dll 6.0.2900.5512 573 KB 2008-04-13 20:11:57 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  MSENCODE.dll 2000.7.25.0 KB 92 10/08/2004 07:00 not available C:\WINDOWS\SYSTEM32
  Mshta.exe 8.0.6001.18702 45KO 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Mshtml.dll 8.0.6001.18975 5 818 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Mshtml.tlb 8.0.6001.18702 1 601 KB 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Mshtmled.dll 8.0.6001.18972 65KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  mshtmler.dll 8.0.6001.18702 47KO 08/03/2009 04:31:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Msident.dll 6.0.2900.5512 51KO 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Msidntld.dll 6.0.2600.0 15 KB 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  msieftp.dll 6.0.2900.5512 243 KB 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  msrating.dll 8.0.6001.18702 189KO 08/03/2009 04:34:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  mstime.dll 8.0.6001.18968 598KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Occache.dll 8.0.6001.18968 202KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  proctexe.ocx 6.3.2900.5512 80 KB 2008-04-13 20:10:35 C:\WINDOWS\SYSTEM32 Intel Corporation
  sendmail.dll 6.0.2900.5512 54 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shdoclc.dll 6.0.2900.5512 537KO 2008-04-13 13:03:19 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shdocvw.dll 6.0.2900.5512 1 464 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shfolder.dll 6.0.2900.5512 25KO 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shlwapi.dll 6.0.2900.5912 463ko 08/12/2009 05:23:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  TDC.ocx 8.0.6001.18702 65KO 08/03/2009 04:30:56 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  URL.dll 8.0.6001.18702 104KO 08/03/2009 04:34:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Urlmon.dll 8.0.6001.18968 1 183 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Webcheck.dll 8.0.6001.18702 231KO 08/03/2009 04:34:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  WinInet.dll 8.0.6001.18968 895 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation

  Internet Explorer connectivity:

  Dial connection preference never
   
  LAN settings
   
  AutoConfigProxy wininet.dll
  AutoProxyDetectMode disabled
  AutoConfigURL
  Proxy disabled
  ProxyServer
  ProxyOverride
   
  America Online
   
  AutoProxyDetectMode disabled
  AutoConfigURL
  Proxy disabled
  ProxyServer
  ProxyOverride
  Internet programs to use connection not available
   
  Maximum attempts 10
  Waiting between retries 5 sec
  Disconnect idle 20 min time
  Autodisconnect disabled
   
  Modem Intel(r) 537EP V9x DF PCI Modem
  Remote access PPP server
   
  Connect to the network
  Enable Software Compression Yes
  Would require no encrypted password
  Require no data encryption
   
  TCP/IP network protocols
   
  Use server assigned IP address Yes
  The 0.0.0.0 IP address
  Use server assigned NameServer Yes
  Primary addresses DNS name server: 0.0.0.0
  Secondary DNS: 0.0.0.0
  Primary WINS: 0.0.0.0
  Secondary WINS: 0.0.0.0
   
  Use the Compression header IP Yes
  Use the default gateway Yes
   
  Name of the script file

  You have any ideas that could help me find an internet connection?  Thanks for any help.

  The removal of the virus seems to have taken some required system files.  See if the System File Checker helps.  Click Start > run and enter in the field open.

  sfc/scannow

  Press ENTER.  The System File Checker must detect the missing necessary files and put back them.  If this does not work, use a system restore point from before you were infected.  If this does not work, get out of your XP installation diskettes.

• Corrupt troubleshooting tools

  I tried running Vistas Checkup, Performance and maintenance tools and hardware diagnostic tools and all I get is Notepad that appears with what looks like the inforamtion in another language. What is going on? Help, please.

  Click on the start ORB and type regedit.exe.  Press ENTER.  When the Registry Editor opens, use the tree on the left to navigate toHKEY_CLASSES_ROOT - use of the symbol path to expand the nodes under +.  From there, go tohtafile, then Shell, then Open, then the command.  On the right side, with theorder selected on the left, what is the value of 'default'?  You can use a capture of screen, or copy and paste, to provide the info (if a screenshot, make sure that all the data value is visible).

  The value must be set to one of the following values (as the case may be, you use Windows x 64 or x 86) - If this is not the case, change it to one of the below and see if that makes a difference.  If this isn't the case, restart and try again:

  x 64:
  c:\windows\syswow64\mshta.exe "%1" % *.

  x 86:
  c:\windows\system32\mshta.exe "%1" % *.

  If you are unsure which architecture ([x 86] 32 - bit or 64-bit (x 64)) that you are using, look for a folder named syswow64 in c:\windows. If it's there, it's strong enough to bet that you are running an x 64 Windows arc.  Otherwise, check the value "type system" in the control panel of the system.

• Get information from my computer about the details of the graphics card and so on, in order to install games.

  From the control panel > Performance and tools > can't view and print details of the basis of the normal English Windows experience index. See below. This is what is displayed in Notepad.  The reason why I'm doing this is because I was not able to install Games 2/2, I bought. The guy at EB Games says print a list of information on the computer so that I could buy the appropriate game. I would like to have a game on my computer. My friend recommended to Doom 3. Is there something that exists and why I receive this report not readable?

  
  

  Check this similar thread:

  Printing performance information

  In the end, make sure that HKEY_CLASSES_ROOT\htafile\Shell\Open\Command is set to one of the following values, depending on the architecture of the operating system:

  x 64:
  c:\windows\syswow64\mshta.exe "%1" % *.

  x 86:
  c:\windows\system32\mshta.exe "%1" % *.

• My hp deskjet 1050 J410 series is not compatible with windows 8?

  I downloaded the new drivers and I am able to print with my printer HP deskjet 1050 J410 but I am not able to scan anydocumants. I can't open the HP printer Assistant window. The error reads as follows:

  Adobe reader software cannot open HPSPProgress.hta because it is not a supported file type or the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  I don't know if this has to do with my default programs or what happens. I am currently using 8 64-bit windows.

  Thank you

  Hello

  The doftware is fully compatible with Windows 8, the question appears because of the wrong configuration of your operating system to start the HTA with Adobe Reader files wrongly.

  Follow the steps below, this should solve the problem:

  1. Click the Windows (the key with the Windows Logo) key + keys X, and then open the Control Panel.
  2. Select programs.
  3. Under default programs, select make a file type always open in a specific program.
  4. Lecate and double click in the list .hta (HTML Application will appear in its description).
  5. Select Microsoft (R) HTML Application Host.
  6. If such an option does not appear, click Other Options.
  7. Click find another app on the PC at the bottom of the list.
  8. Navigate to C:\windows\system32 and select mshta.exe
  9. Click on Open, close all windows and then try to open the HP software.
     

• Microsoft html application host has stopped working

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get this error message when I try to play a game that has been installed at least a year without problem.  I've uninstalled and reinstalled without success.

  I am also unable to open windows media player.  Nothing happens when I click it.

  Also, when I try to open Mcafee I get a blank white box. But it appears in the lower right corner that they are running.

  I tried several solutions with no luck:

  A ran sfc/scannow as administrator.  only went to 78% and says protection could not perform the requested operation

  Also, went to problems and reports, view history, and that's what I found:

  Product

  Application Microsoft (R) HTML host

  Problem

  Stopped working

  Date

  26/07/2010-12:55

  Status

  Not reported

  Signature of the problem

  Problem event name: APPCRASH

  Application name: mshta.exe

  Application version: 8.0.6001.18702

  Application timestamp: 49b3ac74

  Fault Module name: mshtml.dll

  Fault Module Version: 8.0.6001.18928

  Timestamp of Module error: 4bdfb76d

  Exception code: c0000005

  Exception offset: 0004ebab

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Files helping to describe the problem

  Version.txt

  AppCompat.txt

  Memory.HDMP

  minidump.mdmp

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        What games you try to play?

  ·        McAfee is installed on the system?

  I suggest to uninstall Mcafee from the system and check.

  C0000005T is a code of access violation. It is the operating system telling you that a program has malfunctioned. It has nothing specific to do with a particular program, or a brand of software, this is straight from the CPU and kernel of the operating system.

  Step 1:

  I suggest you to do a clean boot.

  a. log on to the computer using an account with administrator rights

  b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  c. If you are prompted for an administrator password or for confirmation, type your password or click on continue

  d. under the general tab, click Selective startup and then click to clear the check box load startup items. (The check box use the file Boot is not available.)

  e. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.

  b. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  c. under the general tab, click the Normal startup option and then click OK.

  d. When you are prompted to restart the computer, click on restart.

  If the problem is solved, check which third-party program is causing the problem. For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929135

  Step 2:

  An online virus scanner and check. Click on the link below.

  A live care

  http://OneCare.live.com/site/en-us/Center/howsafe.htm

  Malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printing software does not open

  I have a premium officejet pro 8600

  I downloaded the latest version of the software and installed it in the windows 7 64-bit environment

  The GUI does not load when I click on the exe file. It opens Notepad and shows what looks like html script.

  2 note pad open windows 1 hp solutions and 1 for the progress of hps

  I've uninstalled and reinstalled the software nothing works

  Hi Ifound this file which seems to solve the problem you are experiencing. I don't see a way to attach the file, but you can copy the content and paste it into Notepad and save the file as fix_hta.reg. It's got to the registry > file > import file in the registry (fix_hta.reg) once done close the registry and open the graphical user interface.

  Start copying

  Windows Registry Editor Version 5.00

  [- HKEY_CLASSES_ROOT\.hta]

  [- HKEY_CLASSES_ROOT\htafile]

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.hta]

  [HKEY_CLASSES_ROOT\.hta]
  "PerceivedType"="text".
  @= "htafile".
  "Content Type"="application/hta.

  [HKEY_CLASSES_ROOT\.hta\PersistentHandler]
  @= "{eec97550-47a9-11cf-b952-00aa0051fe20}".

  [HKEY_CLASSES_ROOT\htafile]
  "EditFlags" = dword:00100000
  @= "HTML Application.
  'FriendlyTypeName"="@C:\\Windows\\System32\\mshta.exe,-6412 '.

  [HKEY_CLASSES_ROOT\htafile\CLSID]
  @= "{3050f4d8-98B5-11CF-BB82-00AA00BDCE0B}".

  [HKEY_CLASSES_ROOT\htafile\DefaultIcon]
  @= "C:\\Windows\\System32\\mshta.exe,1".

  [HKEY_CLASSES_ROOT\htafile\Shell]

  [HKEY_CLASSES_ROOT\htafile\Shell\Open]

  [HKEY_CLASSES_ROOT\htafile\Shell\Open\Command]
  "@="C:\\Windows\\System32\\mshta.exe \"%1\" %. "

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.hta]

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.hta\OpenWithList]

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.hta\OpenWithProgids]
  "htafile" = hex (0): "."

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.hta\UserChoice]
  "Progid"="htafile."

  Stop copying. Do not copy the first and the last line that says (start and stop copy)