Customers unable to browse the internet on the router from Cisco 871 K9

Similar Questions

• SSL VPN may be configured on the router from Cisco 881/K9?

  I'm now confused if SSL VPN can be configured on the router from Cisco 881/K9.

  Please someone advise me.

  If Yes, for only 5 users, what I need to buy the license or license is supplied with the router?

  Thank you.

  Yes, and you need a license:

  FL-WEBVPN-10-K9

  License SSL VPN functionality for up to 10 users (incremental), to 12.4 T based only IOS versions

  FL-SSLVPN10-K9

  License SSL VPN functionality for up to 10 users (incremental) for the only based 15.x IOS versions

• Internet works is not in LAN behind a router from Cisco 881

  My internet does not work in local network that is behind the router from Cisco 881. Here is the configuration of the router.

  Help, please...

  Current configuration: 1478 bytes
  !
  ! Last modification of the configuration at 08:16:12 UTC Wednesday, February 6, 2036
  !
  version 15.1
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname R1
  !
  boot-start-marker
  boot-end-marker
  !
  enable secret 5 CATz $1$ $ VqnIsAQvFHHnV9E/Q6RMV0
  !
  No aaa new-model
  iomem 10 memory size
  !
  !
  IP source-route
  !
  !
  DHCP excluded-address IP 192.168.1.1
  !
  IP dhcp pool dhcppool1
  import all
  network 192.168.1.0 255.255.255.0
  default router 192.168.1.1
  DNS-server 202.56.230.2 202.56.230.7
  !
  !
  IP cef
  name of the IP-server 202.56.230.2
  name of the IP-server 202.56.230.7
  No ipv6 cef
  !
  !
  license udi pid CISCO881-K9 sn FGL1539254Q
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface FastEthernet4
  IP 182.73.122.54 255.255.255.252
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface Vlan1
  IP 192.168.1.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  router RIP
  version 2
  network 192.168.1.0
  !
  IP forward-Protocol ND
  IP http server
  no ip http secure server
  !
  overload of IP nat inside source list 101 interface FastEthernet4
  IP route 0.0.0.0 0.0.0.0 182.73.122.53
  !
  access-list 101 permit ip 0.0.0.0 255.255.255.0 any
  !
  !
  !
  !
  !
  control plan
  !
  !
  Line con 0
  exec-timeout 5 30
  password vinayak123
  opening of session
  no activation of the modem
  line to 0
  line vty 0 4
  password vinayak123
  opening of session
  transport of entry all
  !
  end

  Hello @[email protected] / * /;

  Thank you for your message. I had a glance on the configuration for you. You used a network as opposed to a wild card mask in your access control list for your NAT statement. This changed the field from the source to 0.0.0.0 automatically, which is going to be does not match your interior traffic and NAT'ing outside.

  To fix this, please run the following commands and test once more.

  no access-list 101access-list 101 permit ip 192.168.1.0 0.0.0.255 any

  Thank you

  Luke

  Please evaluate the useful messages and mark the correct answers.

• My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

  3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
  I'd appreciate any help you can provide.

  original title: unable to browse the network.

  All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

  Pls check your computers under workinggroup (domain name)

  Check if your firewall is not blocking.

• Booklet 70CT: unable to browse the network

  I'm trying to connect my booklet 70CT to an existing LAN. I use a Fast Ethernet Linksys PC card in the booklet, connect a Linksys Wireless-G Broadband Router on a LAN port.

  There are two other computers connected to the router network OK. I did all the installation procedures in the manual of the PC card and everything seemed to be working normally.

  When I double click on network neighborhood on the booklet, I get a screen with "Entire network" in this topic. When I double-click it, I have a sign saying "Unable to browse the network."

  Help, please.
  Frank

  Hello

  I searched on the Microsoft Web site to some proposals of solution and found this:
  Unable to browse the network"when you click Network Neighborhood
  http://support.Microsoft.com/kb/260214

  This problem may occur if there is a key to logon automatically in the registry at the following location:
  EntVersion entVersion\Network\Real Mode Net

  It seems that you can solve this problem by deleting the registry location AutoLogon value listed in the section "Cause".

  Also check this:
  Network error (1222): unable to browse the network
  http://support.Microsoft.com/kb/170336

  Good luck

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• Unable to send the message from my account to my other in Outlook Express 6

  Unable to send the message from my account to my other in Outlook Express 6

  What is a Pop3 account? IMAP? Hotmail? Can I assume that it used to work? If it worked until recently, follow these steps.
   
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 
   

• Unable to remove the user from database

  Hi all
  
  I'm unable to remove the user from the database and get the error shows:
  
  "must use DBMS_AQADM. DROP_QUEUE_TABLE to drop the queue tables"
  
  I find 3 table with AQ prefix in the schema, but unable to remove the table even using "sys" user.
  
  No idea how I can do?
  
  Kind regards

  Hello

  select object_name,object_type from dba_objects where owner='USERNAME' and object_name like '%AQ%';
  

  TO remove the table from the queue, sign in as the owner and

  exec DBMS_AQADM.DROP_QUEUE_TABLE(queue_table=>'PASTE_THE_OBJECT_NAME_FROM_ABOVE',force =>TRUE);
  

  Anand

• "Unable to install the plugin from RoboHelp for FrameMaker...." »

  Hi-

  I have 9 Frame and a copy of RoboHelp 8.0.0.203 demonstration and works in Windows 7 (all of a sudden. Yet to learn my way in the operating system after a catastrophic failure of the weekend with my trusty little machine XP.) I have no TCS2; just these two stand-alone tools. I have a book of frame I need to turn into contextual HLO and am auditioning Robo for the task.

  No dice. Whenever I try to import (see below re linking) I get an error message in a box marked "RHUtils": "unable to install the plugin from RoboHelp for FrameMaker. If please close FrameMaker and try again. »

  
  With your permission, I'll cover a few points in the order in which they come to mind:

  == > Initially I tried linking, hoping of course to the advantages of the single-sourcing. I learned in this forum and elsewhere (-btw, thanks for this great resource) I need the TCS2 in good faith in place to connect. Thought that I could import for now instead of it, just to see how it happened; received the same error message.

  == > It was AFTER I had done the research and on the Adobe site (http://www.adobe.com/support/robohelp/misc.html) found this: "the plug-in for RoboHelp, FrameMaker FrameMaker users allows quickly convert any number of books for a simple import or FrameMaker files in RoboHelp 2002 and X 3.» RoboHelp X 4 includes the plug-in! For RoboHelp, FrameMaker plug-in is only available for Windows. To install the plug-in, unzip the RoboMIF.dll into the Plugins folder in the installation of FrameMaker folder (normally found in C:\Program Files\Adobe\FrameMaker7.0\fminit\Plugins)...   Once the plug-in has been installed, restart FrameMaker. FrameMaker now includes a RoboHelp menu. "OK: I have downloaded RoboMIF.dll, installed according to the instructions, rebooted just in case, and now"Adobe RoboHelp"actually appears in the menu bar in the frame. I however always the error message whenever I try to import (now).

  
  == > For several of these attempts Frame was indeed closed. For several other Frame opened to the entry page and nothing else. No apparent effect, anyway.

  
  == > Import and link Word files seems to work very well - which is cool, but my document is in frame at the moment. I know I can convert, but up to now to convert the word seems to need to get all references, what I did in the framework. Doable but not my first choice.

  
  == > I found a thread of editors at http://www.mail-archive.com/[email protected]/msg18576.html / / www.mail-archive.com/[email protected] msg18576.html relating to this problem. The recommendation, (published here for brevity), who was the author:

  1. locate [the] Maker.ini file and ideally make a backup of it, just in case.
  2. in the [APIClients] section of the maker.ini file, add the following line:

  RH4FMver9 = Standard, RH4FMver9, C:\Program Files\Adobe\Adobe Technical Communication Suite 2\Adobe RoboHelp 8\RoboHTML\RHFrameMakerServer9.dll,all

  3. you should now be able to launch RoboHelp and 'link' files, FrameMaker, FrameMaker application should launch correctly.

  This doesn't seem to be my answer because I don't yet own TCS2. This path does not exist.

  (I still get excellent advice of training provided by this answering machine, RJ Raquez, to http://blogs.adobe.com/rjacquez/2009/05/linking_framemaker_9_books_in.html.)

  In any case, this is where I realized that I was, at least for now, of ideas. Does anyone have more?

  Thank you-

  Anne

  If you do not want to go down the road of miftogo mentions Arnis, you can always download the demo of TCS2 - it is fully functional for the period of the demo. I am tempted to install it in its own virtual machine (or another machine entirely) so that you do not get the demo interfere with your legitimate copy of FM9.

• How to find the IP address of the router from my computer in Windows 7?

  What is the best way to find the IP address of the router from my computer in Windows 7? I know not how to make using the start > cmd > ipconfig, but is there a way to do it with just the mouse?

  Right click on the WiFi icon or-> LAN in the system tray click on open network and sharing Center-> click on "Wireless network connection"--> details click-> see item highlighted on the screenshot:

  

• Unable to browse the internet for the VPN (ASA5505 running 8.3)

  We have improved our ASA 5505 to 8.3 firmware image (2) and we have a working VPN configuration (customer VPN in Windows can connect and browse the network of the company as well as their local networks [split tunnel seems to work in this regard]).  However, some time connected they are unable to also browse the internet.  In our configuration of 8.2 (1) we have done 'something' to allow remote users to browse the internet at the same time, but apparently this is not transferred in the upgrade.

  I'm sure it's a simple nat our order routing, but it can't know.  I've gotta hit the road now but will post our config this afternoon if no one knows the "secret" to do.  Ideally, internet traffic to remote users out of their internet connection and not be achieved through the office.  We understand the risks associated with it.

  Hi Scott,.

  To the best of my knowledge, I don't think that l2tp over IPSec supports split tunneling. If you use the Cisco VPN client, you should be able to get this working.

  What we can do in this case is to set up turn on the SAA for these vpn clients. Please add the commands to run below:

  permit same-security-traffic intra-interface

  network of the NETWORK_OBJ_10.0.0.0_27 object

  dynamic NAT interface (outdoors, outdoor)

  Let me know if it helps!

  See you soon,.

  Assia

• My Firefox browser is unable to browse the internet

  Hey there! When I use Firefox to browse the internet I just get a screen that reads "it works!" Thoughts? I'm happy to send a screenshot of the screen.

  It started when I installed the module for HTTPS Everywhere.

  Problem solved. Embarrassing, I simply relied on tools "Clear recent history" and all selected. It works fine now.

• PSAA9 satellite A100 - unable to browse the Internet

  Hello

  I reinstalled the operating system on a friends computer laptop A100, installation of WINXP pro.

  After I installed, I noticed that a lot of missing drivers so I scoured internet and downloaded most of them. The problem I have is that the ethernet connection seems to not work properly. I installed the driver on the toshiba site and hooked it up to a test network to my polytec.

  On this network to test an internet connection is available, but the laptop cannot browse the internet! I can ping other PC networking on mobile Internet sites and ping but cannot browse their IE. Other network PC cannot ping the laptop automatically obtained IP address.

  Any ideas what's happening?

  Hello!

  Have you tried another browser like Firefox? I don t use IE because Firefox is much faster and I can't get a large number of modules.

  In addition, you should try to disable the firewall on the laptop. Maybe it s blocks the internet connection or the internet browser.

  Last but not least try to use a static IP address. You can change this in the TCP/IP settings.

• Unable to browse the internet while connected to the VPN

  Hi all..

  It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

  Thank you...

  Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?

• Unable to browse the server data store

  Hello

  I lost the files in my data store. I have two data warehouses and two of them had vm folders in there but tonight my vms unresponsive and when I try to restart they throw an error that a file is not present. When I tried to browse the data store, the two data stores back empty.

  Thank you

  Hey m,

  can you go on the albums esx server into your virtualcenter

  Try remapping to one of the existing NFS shares. You should get a message that the share already exists, but when you return to the summary page, you should be able to doubleclick on the NFS share and view folders (it's like trying to connect is enough to restore the existing connection)

  Let me know how you go