Internet works is not in LAN behind a router from Cisco 881
My internet does not work in local network that is behind the router from Cisco 881. Here is the configuration of the router.
Help, please...
Current configuration: 1478 bytes
!
! Last modification of the configuration at 08:16:12 UTC Wednesday, February 6, 2036
!
version 15.1
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname R1
!
boot-start-marker
boot-end-marker
!
enable secret 5 CATz $1$ $ VqnIsAQvFHHnV9E/Q6RMV0
!
No aaa new-model
iomem 10 memory size
!
!
IP source-route
!
!
DHCP excluded-address IP 192.168.1.1
!
IP dhcp pool dhcppool1
import all
network 192.168.1.0 255.255.255.0
default router 192.168.1.1
DNS-server 202.56.230.2 202.56.230.7
!
!
IP cef
name of the IP-server 202.56.230.2
name of the IP-server 202.56.230.7
No ipv6 cef
!
!
license udi pid CISCO881-K9 sn FGL1539254Q
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
IP 182.73.122.54 255.255.255.252
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
!
interface Vlan1
IP 192.168.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
router RIP
version 2
network 192.168.1.0
!
IP forward-Protocol ND
IP http server
no ip http secure server
!
overload of IP nat inside source list 101 interface FastEthernet4
IP route 0.0.0.0 0.0.0.0 182.73.122.53
!
access-list 101 permit ip 0.0.0.0 255.255.255.0 any
!
!
!
!
!
control plan
!
!
Line con 0
exec-timeout 5 30
password vinayak123
opening of session
no activation of the modem
line to 0
line vty 0 4
password vinayak123
opening of session
transport of entry all
!
end
Hello @[email protected] / * /;
Thank you for your message. I had a glance on the configuration for you. You used a network as opposed to a wild card mask in your access control list for your NAT statement. This changed the field from the source to 0.0.0.0 automatically, which is going to be does not match your interior traffic and NAT'ing outside.
To fix this, please run the following commands and test once more.
no access-list 101access-list 101 permit ip 192.168.1.0 0.0.0.255 any
Thank you
Luke
Please evaluate the useful messages and mark the correct answers.
Tags: Cisco Support
Similar Questions
-
How to remove a domain controller that was removed from the Internet works but not demoted
How to remove a domain controller that has been remove from the Internet works but not demoted
got two domain controllers and been deleted but not retrograde
can help pls
Hello
Your Windows is better suited for the directory on TechNet Services. You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-us/winserverDS/threads
I hope this helps.
-
WWAN works do not with lan cable
Hello everyone,
I recently installed new card 'Ericsson 3507 g Mobile Broadband minicards Network Adapter' on my x 200 (Machine type 74542JU, XP PRO SP3), driver downloaded and installed on Lenovo's site.
And the card works fine with different Sims (conn edge or 3G).
But when I plug the cable into my LAN card, I can't connect to the internet.
Icon WWAN connection in the bar of tasks remains active, "Thinkvantage Access Connections" (v5.33) Watch also 'connected' status, but somehow can not connect to the internet.
When the Lan cable is plugged in "Thinkvantage Access Connections" is "diagnostics", when I test the "connection", he wrote "unable to internet connected" with error code 018 and "verify the firewall configuration.
I thought that maybe firewall ESET is the problem, but I after you have uninstalled all ESET Smart Security and now using only the XP firewall, but problem remains.
When I plug the Lan cable, I can then connect to the internet without any problem.
Configuring IP on WWAN is automatic, on LAN address is fixed, I want to connect to the network server.
Any help please, it's beyond my limits.
Your address a fixed IP on the LAN cable a defined gateway address?
If so, get rid of it. Multi-hosted research for more information.
-
Dial Up connected but internet works do not... after uninstall antivirus
I installed avast internet security 5.0.677 and after 7 days, he got no updates. Therefore, I installed UN, but after that my internet is not working.
I liaison as a dial-up modem to broad band usb. It shows that I am connected but my browser does not work.
Please let me know the solution.
Kind regards
Abdul Hafeez
Hello
When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities.
If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process.
WinSock and TCP/IP update.
Type Cmd in the search text box.
Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt. Allow the elevation.
Type netsh winsock reset at the command prompt and press the Enter key.
The same processes to refresh the TCP/IP replaces the command typed with.
netsh int reset press enteripconfig/flushdns press Enter
Restart your computer. Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Internet works do not through router...
I used the WRT310N v2 for about two months and it worked fine. The other day, we must have had a loss of power fast in my house because the clocks were all flashing. I went to use my laptop and I could not go on the Internet. I checked my office and it was closed by the power loss. I turned on the desktop and Internet still does not work. The only way I can get on the Web now is if I run the cable directly from the modem on my desk. I tried to reset the router and restart everything and I can not access the Web when I have the cable from the modem to the router on my desktop. I'm not the most technical person, but it makes no sense to me. Any ideas how can I fix?
Thanks in advance for your help.
I didn't have to go as far as looking at the IP address. When I connected the modem to the router, then the router to the PC and reset for 30 seconds, it worked. I did this last Friday and Saturday and nothing, don't know why it worked, but it did!
Thank you very much for your help!
-
SWF animations works does not properly during export to PDF from InDesign
I use InDesign CS5 and you have created a document that I want to add interactivity and animations to. I created buttons and page destionations, etc., which all work perfectly when you export to PDF, but the simple animation that I wanted to include do not work. The animations were created in InDesign, then exported as a SWF file and then imported selection placed in InDesign and then exported as an interactive PDF where animations either do not work, have not been picked up or gift does not work as it should. What I am doing wrong, how can I get the animations work properly?
First of all, if you care about your audience, stop using SWF that has now
ZERO support on mobile devices.
However after that make sure that InDesign is fully patched, I would recommend
Place the SWF file in the PDF file in Acrobat Pro instead.
Bob
-
Problems with Windows Update on Vista / Internet work do not
Hello
My Internet connection works, I can ping and connect on msn, but in Internet Explorer or Mozilla Web pages are not accessible or are not displayed. I have tons of updates from windows that could not install successfully including SP2 and .net framework 3.5
Protected-mode Windows works fine incl. Internet.
I corrected the registry with registry Uniblue - did not help.I'm desperate, don't know what to do anymore.
Thanks for the help
Display of the tool:
Diagnostic report (1.9.0019.0):
-----------------------------------------
Given WGA-->
Validation status: genuine
Validation code: 0Cached Validation code: n/a, hr = 0x80070426
Windows product key: *-* - WWR7C - QF2M7 - 2 TB 37
The Windows Product Key hash: YqRmTj4qWYwTYqB/WJzBj8/ali_ch47 =
Windows product ID: 89578-OEM-7332157-00056
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6001.2.00010300.1.0.003
ID: {37C088D7-AD59-4DB7-B00C-4A917100EEF0} (3)
Admin: Yes
TestCab: 0x0
WGA version: registered, 1.9.42.0
Signed by: Microsoft
Product name: Windows Vista (TM) Home Premium
Architecture: 0x00000000
Build lab: 6001.vistasp1_gdr.091208 - 0542
TTS error:
Validation of diagnosis:
Resolution state: n/aWgaER data-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002WGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: 2.0.48.0
OGAExec.exe signed by: Microsoft
OGAAddin.dll signed by: MicrosoftOGA data-->
Office status: 100 authentic
Microsoft Office Home and Student 2007-100 authentic
2007 Microsoft Office system - 100 authentic
OGA Version: Registered, 2.0.48.0
Signed by: Microsoft
Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{37C088D7-AD59-4DB7-B00C-4A917100EEF0} 1.9.0019.0 6.0.6001.2.00010300.1.0.003 x 32 *-*-*-*-2 TB 37 89578-OEM-7332157-00056 2 S-1-5-21-3007632190-2218679308-777669079 LENOVO 0769BRG LENOVO 68ET26WW 20071017000000.000000 + 00068333507018400FA 0807 0407 Mitteleuropäische Zeit(GMT+01:00) 0 3 LENOVO TP-68 100 100 Microsoft Office home and Student 2007 12 139195B81F68718 hHXwU/8LBl8gV3js8aFK8GaZapo = 81602-908-4690621-68514 1 100 Microsoft Office system 2007 12 19 Content Spsys.log: 0 x 80070002
License data-->
Software Licensing service is not working.Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OAAAAAEABgABAAEAAQAAAAAAAwABAAEAJJQOMcB81ExQCNYZ0NakVUaDhlK24/L08iDcK6xWKoU =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC INTEL CRESTLNE
FACP TOSCPL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
TCPA Intel CRESTLNE
DOCUMENT TMOR PTLTD
SLIC LENOVO TP-68
APIC INTEL CRESTLNE
SSDT SataRe SataAhci
SSDT SataRe SataAhci
SSDT SataRe SataAhci
SSDT SataRe SataAhciI corrected the registry with registry Uniblue - did not help.
Not only it did not help, he has probably compounded questions! If you ever think that your registry database must be cleaned, repaired, amplified, to the point, healed, twisted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
A reset solves your problem of update? -Online http://support.microsoft.com/kb/971058
Tip: Run the difficulty mode by default and aggressive , if necessary.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Internet works does not fast and stops constantly
Why internet stops working even though it is connected?
This looks like a problem with your Internet Service Provider (ISP) and that you should probably contact them to get advice... If there is a problem with your modem or router, your ISP provider should be able to identify the same and give you advice on how to proceed.
Good luck...
-
BlackBerry Smartphones Internet works is not on my "BOLD"
For the last 3 days I have not received emails and could not connect to the Internet, even when I'm home with my turned on wifi. I still get calls and text messages. Please help, thanks
Follow these additional guidelines:
(1) registry HRT: (OS5) home screen > Options > Advanced Options > host Routing Table > Scroll to any input line and > press the Menu key > and then click on register now. If you have a device OS 6 or 7 OS, look at options > device > advanced > Table host routing, etc.
(2) Service reference books: Article ID: KB02830 how to send service directories to a BlackBerry Internet Service account. http://www.BlackBerry.com/BTSC/KB02830
(3) with the BlackBerry device under voltage, remove the battery for a minute, and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.
(5) now return to 1) mobile.blackberry.com email of installation as shown above and follow.
I hope that will move things again for you!
-
BlackBerry Smartphones Internet works do not, email + apps to make
Hi, I was wondering if you could help,
I'm on the Curve 8520 and when I load internet it appears normal but sticks on "Loading"... "downstairs. E-mail works very well, and my Facebook app is OK too. I was wondering if this is a common problem and how it can be solved?
Thanks in advance
Update: even though the phone seems to be frozen, tried a hot battery pull. Correctly loaded browser home page.
Jim Myers
-
Search Engine Internet work do not after update 9.3
does anyone know how to fix the bug of 9.3 update?
If you mean the one where Safari click the links blocks, there is currently no solution. There are several suggested workaround solutions, but not yet final solution.
The best choice at this point, is to use another browser. Google Chrome you will open links in new tabs by pressing them, but does not directly open on the same tab.
The Opera browser application seems completely non-affected and my experience was able to open all the links properly.
-
Internet works does not for Windows 7 on Pavilion g4-2235dx.
G4-2235dx Pavilion
Windows 7
Downloaded Windows 7 on a new computer with Windows 8
Ethernet controller:
Download and install the 6th on the list (auto install):
Network wireless controller:
http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54972.exe
PCI device:
http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56545.exe
SM BUS controller and Bus USB controller: Download Driver Chipset
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2
-
Customers unable to browse the internet on the router from Cisco 871 K9
Hello world
"I just bought my Version of K9 Cisco router 871 running this flash system image: c870-advsecurityk9 - mz.124 - 4.T8.bin".
I am trying to configure this router for home use, while I can block a part of Web traffic (porn sites, sites of films because of the children), but I realized that I was unable to apply the access list Match-class version url (http host).
My major problem is still the base of the router config. WAN has a DHCP IP assignment with the 192.168.1.0 network
The Lan is supposed to have 192.168.3.0 network. IP addresses seem to be properly attributed but not able to ping on the internet router. Local client also cannot resolve DNS. Here is my cofig file.
Please help.
Richard #sh run
Building configuration...Current configuration: 1727 bytes
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
host Richard name
!
boot-start-marker
boot-end-marker
!
!
No aaa new-model
!
resources policy
!
IP subnet zero
IP cef
No dhcp use connected vrf ip
!
IP dhcp pool Richard pool
import all
network 192.168.3.0 255.255.255.0
default router 192.168.3.1
domain richardedet.com
192.168.1.1 DNS server
Rental 2 0
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0
spanning tree portfast
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
DHCP IP address
Check IP unicast accessible source - via rx allow by default 100
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
automatic speed
full-duplex
!
interface Vlan1
Description Local network VLAN
address 192.168.3.1 IP 255.255.255.0
!
IP classless
IP route 0.0.0.0 0.0.0.0 FastEthernet4
IP route 192.168.3.0 FastEthernet4 255.255.255.0
!
no ip address of the http server
no ip http secure server
overload of IP nat inside source list 101 interface FastEthernet4
IP nat inside source map route RMAP-NAT interface FastEthernet4 overload
The dns server IP
!
recording of debug trap
recording ease Committee.2
access-list 100 permit udp any any eq bootpc
access-list 100 permit tcp any one
access-list 100 permit icmp any one
access-list 101 permit ip 192.168.3.0 0.0.0.255 any
!
control plan
!
!
Line con 0
richard password
opening of session
no activation of the modem
telnet output transport
line to 0
richard password
opening of session
telnet output transport
line vty 0 3
richard password
opening of session
entry ssh transport
line vty 4
richard password
opening of session
!
max-task-time 5000 Planner
endHello
problem is that you have changed the IP address of the interface VLAN 1 from 192.168.1.254 to 192.168.1.1
If you need to change by default-router dhcp pool:
Select conf t
Richard-Edet dhcp IP pool
no default router
default router 192.168.1.1
endNAT is also missing:
Enable
conf t
IP access-list standard NAT
permit 192.168.1.0 0.0.0.255
output
IP nat inside source list NAT interface SA4 overload
endAlso perhaps you cannot ping the router console PC because the computer's firewall blocks the ICMP protocol. In windows, I'm sure he is blocked by the firewall. Then you can try ping 192.168.1.1 from the PC and it should work.
Try above changes and then write me if it works, or so we can make other changes.
You can also post the output of the commands (if this will not work):
router: ip road show
router: ping 8.8.8.8 (it should work if your internet provider doesn´t blocks the ICMP protocol)
PC: ipconfig/all -
Impossible to travel from the LAN computers through a router from cisco 887vdsl
Hi I installed a router CISCO v887 to the Amsterdam Office
I set up a VPN between AMS and Edinburg Office tunnel.
1. the VPN is running
2. I am unable to see anything of the LAN computers at the office in Amsterdam.
3 from computers LAN I can traceroute to yahoo.com but the browser I impossible to navigate on yahoo.com and web page hanged in this situation (Web site waiting for response). But nothing comes and LAN users are unable to use internet.
Help, please
My configurations are
IP source-route
!
!
!
!
IP cef
IP domain name xxxxxx.com
8.8.8.8 IP name-server
No ipv6 cef
!
username xxxxxxxxxxxxxxxxx
username xxxxxxxxxxxxxxxxxxx
!
!
VDSL controller 0
!
property intellectual ssh version 1
property intellectual ssh pubkey-string
username xxxxxxx
ssh - rsa xxxxxxxxxxxxxxxxxxx key hash
quit smoking
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key xxxxxxxxxx address 94.xx.xx.xx
!
!
Crypto ipsec transform-set esp - esp-sha-hmac AMS - SET
!
map AMS - R 10 ipsec-isakmp crypto
the value of 94.xx.xx.xx peer
AMS - Set transform-set
match address 102
!
!
!
!
!
interface Ethernet0
no ip address
PPPoE-client dial-pool-number 10
!
!
interface Ethernet0.6
encapsulation dot1Q 6
PPPoE-client dial-pool-number 10
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
!
interface FastEthernet0
load-interval 30
Speed 100
PPPoE-client dial-pool-number 10
!
!
interface FastEthernet1
!
!
interface FastEthernet2
!
!
interface FastEthernet3
!
!
interface Vlan1
10.0.12.1 IP address 255.255.255.0
IP nat inside
activate nat IP
IP virtual-reassembly
!
!
interface Dialer0
no ip address
Shutdown
!
!
interface Dialer10
the negotiated IP address
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 10
Dialer-group 10
PPP authentication pap callin
PPP chap hostname xxx@xxx-ZDSL
PPP chap password 0 xxx
PPP pap sent-username@xxx-ZDSL password 0 xxx xxxx
No cdp enable
AMS - R-crypto card
!
!
IP forward-Protocol ND
IP http server
no ip http secure server
!
!
IP nat inside source overload map route sheep interface Dialer10
IP route 0.0.0.0 0.0.0.0 Dialer10
!
access-list 102 permit ip 10.0.12.0 0.0.0.255 10.0.0.0 0.0.3.255
access-list 102 permit ip 10.0.12.0 0.0.0.255 172.16.0.0 0.0.255.255
access-list 102 permit ip 10.0.12.0 0.0.0.255 172.17.0.0 0.0.255.255
access-list 102 deny ip any one
access-list 175 deny ip 10.0.12.0 0.0.0.255 10.0.0.0 0.0.3.255
access-list 175 deny ip 10.0.12.0 0.0.0.255 172.16.0.0 0.0.255.255
access-list 175 deny ip 10.0.12.0 0.0.0.255 172.17.0.0 0.0.255.255
access-list 175 allow ip 10.0.12.0 0.0.0.255 any
Dialer-list 10 ip protocol allow
Dialer-list 1 ip protocol allow
!
!
!
sheep allowed 10 route map
corresponds to the IP 175
!
!
control plan
!
!
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
access-class 1
exec-timeout 30 0
privilege level 15
password xxxxxx
local connection
preferred transport ssh
entry ssh transport
!
max-task-time 5000 Planner
end
Hi Marc,
Please add these lines highlighted below on both interfaces.
interface Vlan1
IP tcp adjust-mss 1412
interface Dialer10
IP mtu 1452
Please update.
Thank you
-
Problem WiFi - no internet / DNS does not work
Hello
I installed Windows 7 64-bit on my T500, and I have problems connecting to wireless networks.
Everything works fine with cable networks, but when I connect to a wireless network (any network wireless) DNS does not work.
I can ping and connect to websites using intellectual property, but he refuses to resolve domain names. I checked that the correct DNS servers are beeing used.
I installed all the drivers provided by the update of the Lenovos system + some beta drivers from http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html, but right now I'm more sure what drivers are beta and whats release.
Software & drivers installed:
The version of connections access 5.42 build 6JC725WW
11 b/g/m Realtek Wireless LAN Mini-PCI Express Adapter II (version 2007.2.1103.2009 driver)
Microsoft Virtual WiFi Miniport Adapter (version 6.1.7600.16385 driver
Anyone know what this could be?
Thank you
Trygve
I finally found a solution. Looks like there is a compatibility issue with my VPN software and wireless drivers. (even if without using VPN). To disable 'Filter light shrew soft' for wireless Internet works fine - but there again I won't be able to use VPN over wireless who is a problem for me as well.
Maybe you are looking for
-
I erased my Bootcamp Partition. Now what?
Hi all While messing around with my old drive erasure Time Machine, I managed to delete my my SSD Bootcamp partition. I came to terms with the fact that the data is missing. I keep nothing mission critical on windows (so that it is saved). The proble
-
I got the Kindle for Christmas. Played logoquiz last night. Left ITT charge when I went to bed. And now I can't turn it on. When I plug it into my computer it says code 10 looking for pilot and said the driver could not be installed. Help! In my view
-
The delegation of rights sharing in Windows 2008 / R2?
I want to achieve this in a 2008 R2 member server but do not have to do so via local administrators or power users groups.That's why I'm looking for in the same way as in XP/2003 where you can do with TweakUiPowertoySetup.exe. Any thoughts? See you s
-
41 - printer & scanner error code use
original title: use printer & scanner What does the error code 41 & where to find how to fix it
-
Original title: I JUST DELETED 255 CONTACT AND I AM BACK to, at LEAST, THEN 10 MINUTES AND there is 167 NEW CONTACTS IN MY CONTACT LIST. WHAT can I DO about IT... I GET CONTACTS FROM MY CONTACT LIST THAT I KNOW EVEN OR HAS GIVEN PERMISSION TO BE THE