Customizing Ubuntu 14.04 comments

Similar Questions

• custom unexpected rule ("check comments demo")

  The standard "check comments demo" dm3, via Tools > design rules > Custom rules.
  
  This rule fires on all tables. The warning is a bit unusual. Is the name of the rule, but I was waiting for one of the ruleMessage-s that have been programmed in the code...
  See the screen [http://img854.imageshack.us/img854/8080/20110530163257001.jpg | http://img854.imageshack.us/img854/8080/20110530163257001.jpg]
  
  Can you help me fix this?
  
  Edited by: t. on May 30, 2011 07:55

  I see that you have copied the text from the library and put it as a script. Script and the library are used/evaluated in a different manner - function a return statement, last phrase is taken as for the script return value.
  In your case - you just call the function defined (you definition, no use):
  checkcomments (table);

  Philippe

• Windows 8.1 access host a shared folder in Ubuntu 14.04 comments

  Hello

  Since ubuntu 14.04 invited into a 64-bit windows 8.1 host, I'm trying to access windows network.

  The guest is satisfied.

  In the host, I exposed a network share folder.

  In ubuntu, I can windows network.

  By clicking on this generates an error.

  Failed to connect to windows shared folder also.

  -> smb://ip

  None of the folders shared without network connection.

  Any suggestions?

  Thank you

  In the network settings for the guest of ubuntu, I went from the bridge to NAT.

  Now it's working.

• Fusion + ubuntu 13.04 comments: OSX has access to the records of the guest operating system?

  Dear fusion experts - vmware fusion 6.0.2.  newly created reviews of ubuntu gnome, 13.04.  updated.  I have Virtual Machines-> sharing-> share settings, value on for my folder of OSX.  I can run inside the host the following:

  I ran vmware-config - tools.pl .  has worked well (me think; many don't scroll, no error at the end).

  I tried/usr/bin/vmware-toolbox-cmd help, but this is not that informative.

  I also ran apt -moving open-vm-tools; once again, no problem.

  
  

  then, the coup de grace:

  
  

  mkdir/mnt/osx; Mount t vmhgfs .host: / osx/mnt /.

  
  

  but I get "cannot mount the file system: such no device.»  so, right now, I need to understand what .host is and what it exposes; and what services are not run that must be running.

  This should be simple enough.  It is the standard of sharing that probably uses a good number of people.  Why is it hard?

  /IAW

  now, I chose the VM-> reinstall Vmware tools.  It goes up to a CD.  There is a manifest, run_upgrader.sh, a. file tar.gz and two vmware-tools-development files.  No "README" or "INSTALL".  clicking on them does nothing, so I copy into my repertoire.

  nOq, the open-vm-tools uninstall has been easy.  Ok.  the vmware-tools-valuation-64 complains that he wanted to remove open-vm-tools, vmware - config.pl being already there, some other minor stuff complains.

  then I reboot, and now it works.  Thank you, Woody.

  I wonder why vmware fusion is not smart enough to map the shared directory, say, / media/shared or/mnt/shared, by himself.  but at least it works for me now.  Thank you.

• Reports of customer of VSphere 4 comments use OS memory incorrectly.

  I'm sorry if this has been asked and replied, I have searched and cannot find an answer.

  I have a new installation of VSphere 4 with 2 Exchange 2007 servers running on a host in the VSphere client it shows constantly guest memory usage over 90%.  When I connect either way of the Server Task Manager and performance monitor the two reoprt much more low usage.

  Both servers VM tools are installed and are the two installs everything new.

  I have triggers associated with the use of memory so I get alerts by e-mail and would really like to ths to work properly.

  Thanks for the help!

  Hello. Please see the following for more information on your problem. It should be resolved on 30 September.

  http://communities.VMware.com/thread/211585

  and

  http://www.yellow-bricks.com/2009/09/11/memory-alarms-triggered-with-AMD-RVI-and-Intel-EPT/

  See you soon

  Kevin

• Ubuntu 11.04 very slow after upgrade to VMWare Workstation 8.0

  Hello

  After the update to VMWare Workstation 8.0 my Ubuntu 11.04 comments system (which worked very well with Workstation 7) behaves very slow sometimes.

  Slowly I want to say first that it is very laggy when I scroll conent inside windows, and also when I move windows.

  And with sometimes I want to say that this is not always the case. Sometimes, everything works fine for 1 or 2 hours and she begins and, sometimes, that's the problem immediately after starting Ubuntu.

  The problem occurs when restart Ubuntu does not help. But what is stopping Ubuntu and also restart VMWare Workstation on the host (in my case Windows 7) completely. When I do this and I'm lucky everything seems normal again for a while (1 or 2 hours). After that starts all over again.

  VMWare Tools is installed and the comments system has more then enough resources. I also improved the virtuale image to the latest version so that the new features in Workstation 8.0 are available.

  I first thought that maybe it's a RAM problem but the system begins to lag when there is still 1 GB + RAM available and 0.0% swap used.

  Any ideas what I could do? This is quite annoying...

  You can see the same bug that is described in this thread: http://communities.vmware.com/message/1840185#1840185

• Fields comments and missing notes for the view columns

  Hello
  
  Miss me the comments and notes fields for columns to display in the relational model of DM. For the columns of the table, these fields are present, so it would be nice to present to views too. The import of designer must be adapted also to import these fields.
  
  Joop

  Hi Joop,

  My question is about the import of the designer for these fields. This is still not resolved, not even in rel 4.0

  Actually same DM 3.3 imports comments, notes, and comments in the repository designer RDBMS.  Although comments and notes are not accessible through the user interface, they are there and you can include them in the custom report.

  Comments and notes are accessible through the INTERFACE in DM 4.0

  Philippe

• 2008 R2 customization Catch 22 comments

  Type of Catch 22...

  VMWare 3.5u5 VC 2.5u5

  Prompt Windows 2008R2

  I like what comments to VMWare customizations have to offer and they work

  great as naming the computer after the name of the Virtual Machine. This

  I can't do with a custom unattend.xml file.

  However, I would like to install the default profile with some

  customizations and now the old "copy of the default user profile.

  Profile' is not supported: http://support.microsoft.com/kb/959753

  The supported method is to create create an unattend.xml customized with the

  CopyProfile option set to true, then

  c:\Windows\System32\sysprep\sysprep.exe/generalize /oobe

  / unattend: path to the unattend.xml file... It works fine, after a reboot and

  a mini installer of the custom profile is here.

  But providing a sysprep custom file in the comments Customization Wizard gives you just that, custom sysprep file capabilities.

  Is it possible to have the best of both worlds?

  Maybe you could get the best of both worlds.

  Run the command sysprep once with the custom unattend.xml file

  Who will transfer all the settings of the default profile.

  Restart the virtual machine and you get a VM that is unique to all of the default profile that you need.

  Now you can deploy virtual computer with sysprep values.

  Please note that you have only a maximum of 3 times to run sysprep, unless you use the reset switch

  You now how a VM to measure with the default profile.
  Maish

  Architect of virtualization & Systems Administrator

  http://technodrone.blogspot.com

• VMnet vs vlan

  Hello

  I kindly ask you a definitive answer to my question.

  The environment is a host (Fedora 9) with two NIC

  The host is a firewall (wan) between eth0 and eth1 (LAN).

  On eth1, there are five VLANs (from eth1.501 to eth1.505).

  VMnet5's bridge with eth1.505 (vmware - config.pl does not return errors).

  A virtual machine (Fedora 9) with a NETWORK card on VMnet5 (the system applies the configuration of net without errors).

  The result is: no communication on vlan 505 with the virtual machine NIC.

  Why?

  Is - this type of bridge, support for VMware Server 2.0?

  And if this type of bridge is supported in VMware Server 2.0, can it be a hardware or driver error?

  And if so, these errors are due to the host or virtual machine?

  Thanks for the attention.

  We managed to do a similar thing under our VMWare Server 2.0 on a server blade with 1 NIC that need to run multiple guests separated.

  To make it work we followed these instructions:

  (are our virtual networks in numbers 4xxx and for this example, I used our vlan 4089)

  Our host is an Ubuntu 8.04 Server x86_64

  create the VLAN on the host machine (which I assume you have already done)

  edit files

  Add the configuration interface you need or want:

  Auto vlan4089
  (interface has the ID vlan)
  iface vlan4089 inet static
  address 192.168.2.1
  (address can be virtually anything)
  network 192.168.2.0
  netmask 255.255.255.0
  vlan_raw_device eth0
  (physical interface need to be logged in)

  Then do an /etc/init.d/networking restart.

  Stop or pauzé the VM currently installed and executed on this server now.

  Start vmware - config.pl

  When the part of the network configuration is displayed, that's what we used as input:

  You have already setup network.
  You want to skip the network configuration and keep your old settings as they are?
  (yes/no)
  Do you want the networking of your virtual machines? (yes/no/help)
  You prefer to edit your existing network configuration using the
  Assistant or editor? (help/editor/Assistant)
  The following virtual networks have been defined:
  . vmnet0 is filled in vlan4093
  . VMnet1 is filled in vlan4088
  You want to make changes to the current settings virtual networks?
  (yes/no) Yes
  Which virtual network you want to configure? (0 to 99) 2
  What type of virtual network you want to set vmnet2?
  (bridged, hostonly, nat, no) jumpered
  Set up a network bridged for vmnet2.
  Your computer has several available ethernet network interfaces: eth0, eth1,.
  vlan4089. Which do you want to bridge to vmnet2? vlan4089
  The following virtual networks have been defined:
  . vmnet0 is filled in vlan4093
  . VMnet1 is filled in vlan4088
  . VMnet2 vlan4089 bridge
  You want to make additional changes to the existing virtual networks
  Settings? (yes/no) no

  Continue the script vmware - config.pl end andate, it'll start VMWare services.

  Now in your configuration of comments you should be able to slect Custom ethernet for your comments nic interface, and it should work.

  At least it did on our configuration...

  We have 4 of them now, place on the 1 host machine, which serves 5 different networks (host and the vlan 4)

  Hope this helps to clarify a bit...

• ENVY Desktop - 750-137c: help me to find a graphics card that fits.

  Hello, my name is Joe.   I need help with my new pc.  I got this pc without graphics card.  I want to try to upgrade and I think I can use the slot pcie 16 x 3.0?  Correct me if I'm wrong.  I want to know what the card would fit as the motherboard is a Μatx which, from what I can tell, a little smaller.   Also, I may have to upgrade my power supply. If so, is there a special for my pc or can put in none?  I have no idea.   Thank you all for your time.   I'll check here every day.

  Joe

  Thank you for the additional information.

  You certainly need to move the power supply (PSU).  I love Corsair products.  A modular POWER supply is very good because it allows to use only the cables needed.  I normally recommend at least 500W, but in this case, I would recommend 600W.  Your computer is new, and this will give you more flexibility for future updates.

  Here are the system requirements for Fallout 4:

  • 08/07/10 (64 - bit OS required) Windows
  • Intel Core i7 4790 3.6 GHz/AMD FX-9590 4.7 GHz or equivalent.
  • 8 GB OF RAM.
  • 30 GB of free HARD disk space.
  • NVIDIA GTX 780 3 GB/AMD Radeon R9 290 X 4 GB or equivalent.

  Now for the video card.  As you can see, the system requirements are quite high for Fallout 4.  I believe, with the video card on the right, you'll be able to play it is still higher than the average.  The RAM and video card are more important when the games.  Here is a card that should work for you.  Read the customer reviews.  A comment indicates that the map plays Fallout 4 nicely.  However, I claim that you contact EVGA Tech Support (1-800-880-3842) in order to ensure that it will work.  They were always very helpful when I made contact with them.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Properties prode

  Has anyone experience by accessing a generic Windows DLLS in LabView?

  I want to use properties Prode (see 'prode.com') for the calculation of the thermodynamic properties required by a control system based on LabView, I am able to access the C dll, C++, Visual Basic, Fortran, and I think it should be easy to link with LabView... maybe with a small (not sure) custom interface.

  Comments and suggestions are welcome.

  1. Open the Finder of the example.
  2. Change to the 'Search' tab.
  3. Enter 'DLL' in the 'search' tab.
  4. Open the example called "DLL call". "."
  5. Run the VI.
  6. Scroll the list box multiple-column on the front of the line that says "table 1 d.
  7. Click on the 'open current VI for Data Type example.

  That shows you how to call a function that takes an array. As the code for text you need to allocate the array in LabVIEW first, since that's what awaits the DLL.

• Serial No.

  Hello

  When I entered the serial No. I have the following message:

  We are unable to validate the serial number pour adobe lightroom.  Contact the customer service.

  Comment on Adobe to reach customer service?

  You must get the customer; Click on the blue button and then click chat 24/7

  Contact the customer service

• Bridge Metadata Workflow application

  I have hundreds of images in Adobe Bridge I need to add unique metadata. Is there a way for me to type (insert) and save the metadata as I move from one image to the next without taking my hands on the keyboard (i.e. I don't want to have to click anything)?

  Hi Jim_Epler,

  Please ask for a feature here Photoshop community customer family

  Your comments are much appreciated.

  Kind regards

  Assani

• No free writing?

  I bought Adobe Acrobat X Standard at Amazon, installed and have been using it without problem.  But now I want to write a document, and the option of drafting is not in its usual place under Protection.  Any ideas?

  The version of Acrobat Standard does not contain the redaction tool. To get it, you must upgrade to Acrobat Pro.

  There is another option. Writing feature actually does not exist in the Standard version, it is not directly accessible, but you can use it via a script like this, I developed: Scripts custom Adobe: Acrobat - convert comments to editors

• Fonts Typekit does not export when I 'publish to HTML.

  I use a font to typeset (as part of my CC account) in a site and it works fine when I publish the Business Catalyst site, where my customer can see and comment on and suggest revisions.

  However, when I want to go 'live' and "Publish to HTML" Typeset fonts do not export with html files, and the site comes back to Arial.

  What should I do?

  Help?

  Thank you...

  The Business Catalyst site is:

  rubiesanddiamonds. BusinessCatalyst.com

  Hello

  Typekit fonts are bound by the domain or URL entered by you at the time of the FTP upload, publish on BC or export to HTML.

  In the case of export to HTML if you open the files locally, then the field will be different (this will be the path of the local file on the machine you) If this happens. But if you download the same files on the FTP server that has the same domain that you entered when you "Export as HTML" then it should work fine.

  Concerning

  Vivek