CVDs go into restore pending state

Similar Questions

• HP Officejet Pro 6830: Get the printer and the message "the printer into an error state" will not be printed

  Just received this printer refurbished HP 2 weeks ago to replace the one who had a problem with printhead.  Printing worked initially, but now I get the message "the printer into an error state" when I try to print.  The screen at the front of the printer automatically turns off as well, as he is extinguished.

  Hi @M45,

  Thank you for joining the Forums of HP Support!

  I see that you are unable to print because the printer is in an error state. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to do a hard reset to see if that will solve the problem.

  1. Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  2. Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  3. Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).

  If there's an error message displayed in the menu on the front panel, before the display of the printer turns off?

  Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.

  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Click here to update the firmware of the printer with a USB connection.

  If you have completed all the above steps and your product still has a problem, service the product.

  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  I hope this helps. Please respond if you have any questions. I wish you a nice day!

• Restoring the State of the CPU

  Hi all

  
  I have a virtual machine here that has a few important files on however when I try to start it again I get:

  «An error occurred in restoring the State of the CPU of the file "D:\Virtual Machines\VMware\Windows XP Professional\Windows XP Professional - ccd33a20.vmss".»

  A mistake due to the operation of recovery to fail. Preserve the suspended state and fix the error or throw the suspended state. »

  I want to get all the information out of this area to a new installation, but I can't get in

  What you can do is to remove the . VMS file in the folder of the virtual machine. It's like hard reset a system (i.e. pulling the power plug). Remember to save the file to the virtual machine before doing this, to be able to restore the current state, in case you should.

  André

• 11G Grid control - target is temporarily in the State pending state.

  Hello
  
  I use 11G SGD, where at one point that I see several target unknown with the message "target is temporarily in the State pending state."
  
  There are different databases running on different hosts show the same error.
  
  Thank you
  KSG

  KSG,

  You can try to get the status & loading/reloading, last download time & target monitored under commands on agent
  Have also check in/etc/hosts to the agent host must be in format below
  hostname nomhote.nomdomaine

  Check ping telnet for connectivity between the agent & SGD

  Console HTTP port: 7789
  Console HTTPS port: 7800
  Download HTTP port: 4890
  Download HTTPS port: 4900
  Agent port: 3872
  Repository port: 1521
  Central Console port Enterprise Manager = 4889
  Central Enterprise Manager Port Secure Console = 1159

  emctl status agent
  emctl upload
  emctl reload
  emctl config agent listtargets 
  

  Thank you
  Ajay more
  http://www.moreajays.com

• Target is temporarily in the State pending state.

  Hello
  
  After restart of the WHO, some of the targets (4 databases and 1 listener) State appears as "Target is temporarily in the State pending state." even if all targets are running. I restarted the agents on the target too but now use. I use 11g grid and targets are on RHEL 5. One of the listener on a single target shows that even down with TNS-12618: TNS:versions are incompatible error but all servers, including the network server are running on the same operating system with the same version of oracle for example 11.2.0.3
  
  Don't know how to solve these problems. Any help would be appreciated.
  
  -Onkar

  I have a similar problem from time to time. The information in this thread has been a great help: status pending on Grid Control

• What is the best way to cause a VM enter the pending state question?

  I work for a small company that makes a product that allows for the management of Virtual Infrastructure of a SmartPhone (BlackBerry, iPhone, Android etc.) and I want to test our feature that allows you to answer questions VM. But I can't find an easy way to get a virtual machine with a question! Then...

  What is the best way to cause a VM enter a State of "pending issue"? We have vms (200 x, XP) windows and some linux vms.

  Thank you!

  fly to roveit.com

  The easiest way is to copy a virtual machine and it associated the file and when you move it over a data store different and you just update the descriptor entries + VMDK file VMX, one thing people forget to do is also updating uuid.location that refers to the data UUID store. When you try to turn on the virtual machine, you will always have a question asking if you want to

  (1) cancel

  (2) I_moved it

  (3) I_copied it

  Now to replicate this and always get it without copying files is quite simple and takes< 1min.="" create="" a="" dummy="" vm,="" call="" it="" whatever="" and="" you="" don't="" even="" need="" to="" allocate="" much="" space,="" 1gb="" thin="" will="" do.="" you'll="" then="" want="" to="" unregister="" the="" vm,="" right="" click="" and="" remove="" from="" inventory,="" don't="" delete.="" now,="" you'll="" need="" console="" access="" to="" the="" vm's="" .vmx="" file,="" use="" either="" the="" classic="" esx="" service="" console="" or="" unsupported="" busybox="" console.="" if="" you="" have="" access="" to="" neither,="" then="" you="" can="" use="" the="" datastore="" browser="" to="" download="" the="" .vmx="" and="" make="" your="" changes="" and="">

  I'll assume you have console access, go to the data store where the configuration of the virtual machine is stored. Edit the file and look for the entry "uuid.location" and simply change the first two numbers to do anything, say 11 and then save the file. Now return to the store of data browser and re - register your virtual machine, your VM should now appear once again and then try to turn on the virtual computer. If everything was done correctly, you will get a question arises for the virtual machine and it will not until he said.

  You can probably even write a shell script that will copy a backup .vmx file and re-save to automate this process as you write your script/program.

  =========================================================================

  William Lam

  VMware vExpert 2009

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• R500 puts in a pending state

  Hello... I have a new laptop R500... to him I have connected a 19 '' screen LENOVO, LENOVO keyboard and a LENOVO Bluetooth mouse... all the relevant drivers have been installed... installed it runs Windows Vista Edition home premium... the problem I have is that when running in this configuration the mouse enters a SLEEP? HIBERNATE State and will not work... so that it can work, I have to start the Windows Task Manager... .once it starts... .no worries woking all ok until what it stops again... not used time might br 10 minutes or 30 minutes... HHHHHEEEEELLLLLPPPPPP

  Thanks for that I'll try a different mouse... battery seems ok I swaooed there already... Sorry should have stated that

• Restoring the State of an element of the ADF

  Hi all

  Jdev version: 11.1.1.7.1

  I'm iteration on a nested list and adf creating components at runtime from my bean in scope session based on the user input, now the problem is that I have to reset available to the Group Panel again when the user clicks the button of rest and recreate all children, based on a different user input.

  The layout of the Panel group is not even when using resets:

  or the other

  searchResultPanel = new RichPanelGroupLayout();

  or

  searchResultPanel.restoreState (FacesContext.getCurrentInstance (), null);

  Can someone tell me how can I reset the State of the provision of the Group Panel in my managed bean.

  Hello

  You create the PGL programmatically? If you are only his children to programmatically create, then bind the PGL to a bean, as well as in the valueChangeListener get PGL and then remove all its children, and then add accordingly. Also, be sure to trigger a partial update after adding.

  Arun-

• [ADF, JDev 12.1.3] Restore the State of Treetable during navigation

  Hi all

  Version: ADF 12 c 12.1.3 + ADF bc

  Here's our scenario.

  A fragment with a tree bounded-task-flow table.

  1 expand a table tree node

  2. click on a link that leads to the control to the other side of taskflow with just a back button and a page.

  3. click on the back button.

  4. the control returns to the page treetable. But the nodes are automatically reduced now.

  The problem is that we want to maintain the State of the expanded tree table when we sail to the original page.

  Thank you

  SAPP

  It seems that creating a binding for the Treetable to reach pageflow bean maintains state!

  Thank you

  Prasanna

• Windows 7 view Desktop goes into a disconnected state?

  Hello

  I have (1) Office of Windows 7 that enters a State disconnected once the user tries to log on.  I have (4) other VM Win7 in the same pool which are not affected by the issue.  Here's what happens:

  1 user enters the credentials of the AD to display.

  2. the user receives the message "preparing the office" and the screen goes black as usual.

  3. from the console of vCenter, I see that the Win7 Office has the window 'Welcome' screen on the desktop.

  4. the user gets knocked back to the login view screen and the desktop Win7 displays "disconnected" in the admin view.

  5. from vCenter console, I see that the user is connected to the desktop computer.

  6 user tries to log on again views and the screen goes black and back to the login view screen.  View the log of admin user shows Plug and unplug immediately.

  What I've tried so far:

  1 uninstall and reinstall agent view.

  2 reinstall the Vmware tools

  Any ideas would be appreicated!

  I assume you are using PCoIP. And you do not specify what type of pool you are running the virtual machine. Also which users use to access the virtual machine? (see customer, zero client...)

  Review logs inside the VM (C:/Program/VMware/VDM/data logs - if i remember correctly). There, you could see exactly what is happening inside the virtual machine and why his abandonment of the connection.

  Saves the location:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1027744

  During the reinstallation of the tools and the agent, you must install tools first and then the agent.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1028975

  This could also be the case.

  Good luck

• Prblem with buttons; Cursor does not turn in the pointer (finger) into the mouseover state

  I'm programming the buttons on board animate, which are just symbols with their own timeline. I gave them actions to clicks, mouseover and mouseout/mouseouthandler(). They just call URL and are working properly, but I noticed that the cursor does not turn in the pointer (the hand with the index pointig) in the mouseover state. This creates a strange feeling, because users are not sure they are before buttons they click on them...

  Is there any solution for this?

  Thanks in advance!

  Hi Gzapiram,

  Click your button and in the properties panel, you will find a slider, with the auto default value section. Simply select the familiar hand cursor

  Gil

  

• Is there an easy way to restore all panels to their original state?

  I have been using Adobe Classroom in a Book and have re-wired some panels the wrong way.  This means that they are not more like the book.  Is a shortcut or another method to restore the State of out-of-the-box?

  You can restore the preferences of Muse to its original state by disabling them. So get out of Muse and delete the folder AdobeMuse to the following location:

  Mac OS: ~/Library/Preferences

  Windows XP: %APPDATA%\protector.exe

  Windows 7: %APPDATA%\protector.exe

  Now when you restart the application, all preferences must be restored to its original state.

  Thank you

  Vinayak

• OSB: fn - bea: execute - sql () with the sql statement ' INSERT INTO...» »

  Dear Experts,
  
  I need a clarification. Is it possible to use the fn - bea: function execute sql (Oracle Service Bus) to perform an insert operation in a database with the data extracted from the message of the Organization (i.e. $body/Info/username)? If it is possible which is the right syntax?
  Any suggestion is appreciated.
  
  Kind regards
  Mike
  
  Published by: ITDeveloper on November 19, 2009 2.55
  
  Published by: ITDeveloper on November 19, 2009 3.01

  Hi Mike,.

  Please refer to my post for the same question to the fn - bea: sql performance with 'Insert INTO' the sql statement

  Thank you best regards &,.

  Vivek

• won't let me restore my 5s? any help would be appreciated

  I'm tryin to restore my 5s... but he does not terminate restyoring and custom boot the phone? any need help

  to reboot your iPhone, you need iTunes and if you already make sure that it is updated and not a older version. Because if you have the version for IOS 6.1.6 that it does not detect what IOS 7 8 9 as if none of this works try to keep the power button / stop and the "home" button until you see the apple logo and then release the power button and hold down the button home that he will put into restore mode

• Password forgotten during the restoration

  Hello

  I bought a new iPhone6s. I already had an iPhone5. I downloaded itunes and saved the old device. Then I started the iphone 6 s. He asked me a few questions and I answered. He also asked me the password I entered (identical to the one I used for the iphone5, but with the last digit repeated 3 times). Then I plugged the device in itunes to restore and when I selected the restore from itunes the phone rebooted and asked me the password. I entered the password, but she did not accept it. I'm stuck now, the phone does not accept the password. I tried the way mentioned on the support of apple keeping the home button and the sleep/wake, but it won't go into restore mode.

  Is there another way to solve this problem?

  I tried the 'find my Iphone' on icloud, but it is not showing the phone the phone is locked and wifi and is not connected to a network.

  Any help would be much appreciated.

  When you set up your new phone, he should have asked for:

  1 language

  2. Wifi network

  3 iCloud connect

  4. then it should ask if you want to restore from an iCloud or iTunes backup

  Then, you should have Wifi at this stage.

  What is the text right of the message you receive about your access code? At what point in the process of this application it comes up?

  See you soon,.

  GB