D drive is unable to read or write data I have on the disc but will open the program Windows xp disk

Similar Questions

• global variable functional to read and write data from and to the parallel loops

  Hello!

  Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

  I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

  In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

  In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

  What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

  If you recommend something more elegant, please give me some links where I can learn more.

  I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

  I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

  Thank you very much!

  I would use queues instead of a FGV in this particular case.

  A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

  A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

  Your state of inactivity would be the "waiting for data".

  The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

  Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

  There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 
  
  
  There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.
  

• Read or write data in excel

  Hello

  I wanted to know if it is possible to read or write data in excel programmatically? And if possible how to do this?

  I searched a lot on this subject. All forums say how Sung some software. What I wanted to do is, I want to create an application in which I might be able to write data to excel and also read data from excel. Specifically, I can do Java using some jxl. Is there something similar to that?

  Please help me on this since it is a very urgent need for my client.

  Thanks in advance.

  There is no API to write files to Excel on the BB, and I think you will find that this jxl use J2SE functionality that is not supported on the BB, it will be difficult for this port.

  If you plan to be able to put an Excel worksheet on the SD card on the BlackBerry and directly using these data, there still, sorry this is not supported.

  I would investigate export Excel data to SQL and then using SQL on the BlackBerry.

• If I had to format a hard drive, it will delete everythink including windows xp disk if yes I would be able to see all thinking when I turn on my computer, as if that were to happen I could use windows install for install windows xp

  If I had to format a hard drive, it will delete everythink including windows xp disk if yes I would be able to see all thinking when I turn on my computer, as if that were to happen I could use windows install for install windows xp

  Gaara_2k6,
  Welcome to the responses of the Forums.  The short answer to your questions are Yes and no and no.

  Depends on how you format the drive, it will delete everything on the drive.  Now, it may still be recoverable with a software specialist or moving to a data recovery company.

  If you formatted your hard drive you would not be able to start to do anything, because there would be nothing on the startup disk.  With the Windows XP CD or with the recovery media provided by the manufacturer of the PC is the only way to reinstall Windows. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After reinstallation of my dear old Photoshop CS4 of backup external drive after replacing my drive hard, I got an error message (147,20) that my license has expired. I have used the program for years, but he must have downloaded it, because I can't find

  After reinstallation of my dear old Photoshop CS4 of backup external drive after replacing my hard drive, I received error (147,20 and another trial, error 6) messages my license was not working. I have used the program for years, but must have downloaded, because I can't find an original backup drive. I can't afford to upgrade, so for now am limping with Photoshop 6. What can I do?

  If you can spare $10 per month, you can have the latest Photoshop and Lighroom

  Lightroom and Photoshop | Plan of cloud of Adobe's creative photography

  Get it directly from Adobe, you can have CC 2015, or CS6, Mac or PC.

  Do not go without

  Gene

• CD/DVD on Windows VISTA7 driver cannot read or write in VISTA, cant' remove the filters. I need to reinstall MS Office

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Rockeye55,

  If I understand well you are unable to read CDs\DVDs on your windows vista computer, and you have already tried to remove the upper and lower filter to correct this problem, correct if I understood you.

  I would like to clarify some things to refine the question

  (a) this happens with all CD and DVD or just the Office CD?

  (b) don't you recall making any changes to the computer before this happened?

  (c) what happens when you try to remove the filters? You get the error message?

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  Step 1: Search for any displayed error message

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the ligthscribe ROM drives, and then double-click the device name.

  3. If an error code has been generated, the code appears in the status area of the device under the general tab

   

  Step 2: You can try again to remove the upper filter and lower, just run the fixit available in the link below

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

   

  Let us know if it works

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error installing service pack 2 unable to read or write in the database

  I had to reformat my computer and when you do updates, I can't upgrade to windows service pack 2. The error message says "Service Pack 2 Installation Error-failed to read or write to the database." I tried the solution that I found that told me to stop the cryptographic services, go to the CatRoot32 file and remove the Edbxxxxx.log file but when I open the file there is no log file for me to remove it. I reformatted before and never had this problem. Any help would be appreciated, thanks.

  Better to start again from scratch. This time, follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Repost: The computer must not be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

• Unable to read or write to disk

  I have tried to update the BIOS on my computer but now face to the problem of the diskette does not not and therefore cannot perform the required action.

  Hi bripage,

  one) you get specific error messages?

  (b) this happens to you with all the disks or just this one?

  Things you want to check for:

  Ø ensure you that the disk is properly inserted in the drive.

  Ø If the disc is inserted correctly, and you still can't write data, that the disk may be full or write protected.

  Ø you can use a disk that is not write-protected or disable protection against writing by moving the tab of the write protection on the lower part of the drive to close.

  O check the floppy drive on another computer.

  O check with different disks on your computer.

  See the image of a protected write (notch) disk tab.

  

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• T61 DVD/CD-RW drive is unable to read and hangs

  Hello everyone, I hope that people still visit this area of the forums!

  I put highlighted and bolded the symptoms and make them easier to find.

  I recently bought a T61 6457-C15 on eBay and were in the process of setting up and customizing to my tastes. When I got the laptop, it looked as if Windows had been restored to the original state of the factory, as well as some free software, so I proceeded under this assumption. First of all, I used Windows Update to download all the updates that he could find including IE8. I wanted to have a program running on my computer before anti-virus I used a browser to access the internet. I ran IE8 and went directly to the Microsoft Security Essentials Web site and downloaded the installer. At this point, I tried to remove the Norton Internet Security pre-installed and expired using the built-in uninstall, but it failed. A message box jumped in saying that I needed to put the Norton installation disc in the CD-ROM drive so that the uninstall program can find a file of Norton support. My computer did not come with all discs, but my mothe had bought Norton 2008, so I took the disc and put it in the drive. The training started shooting immediatelyand the uninstall program found the file he was looking for in a few seconds. File support directed me to the site of Norton to get their removal tool, which has removed Norton from my system in the short term. Afterwards, I ran Microsoft Security Essentials install program and obtained MSE running on my computer before anything else.

  Then I went on the Lenovo Web site and he had my automatic detection system. That took me to the support page for my system, when I went to the page «Downloads & drivers» I downloaded the connections to access and ThinkVantage Toolbox for Vista 32-bit (my OS is Vista Business 32-bit). I then used Lenovo System Update to get all the updates that are deemed necessary to Lenovo, including those for itself and the software and firmware components system. There were 35 or updates more suggest, and I trusted the software, so I started downloading all. I don't know, but I think that an update of the DVD/CD-RW drive was included in the list, but I don't remember if it's auxiliary software, drivers and firmware. After the Lenovo system update was convinced that she had all the necessary updates, I downloaded Revo Uninstaller and began to remove my computer from uneccassary and unwanted programs and cut the list of start-up. I did not touch any components Windows or ThinkVantage, and I searched each of the programs online, so I don't know I have to not delete or disable all drivers or file system or something to Lenovo. I removed mainly produced Apple and software doesn't work on my system, including an integrated camera driver (my system doesn't have a built-in camera) and third-party programs that were already missing files or otherwise unusable when I got my computer. Until now I had used a gigabit ethernet connection to download the software; I had not used the DVD/CD-RW drive with the exception of the one time wherever I mentioned earlier.

  Now that I have my system set up for my taste, including customization and power settings, I started to install my first program: Command & Conquer the first decade since a DVD-ROM. When I put the disc in the drive and closed, it took a few seconds for the drive to the start and once he did, he was constantly running at high speed and I could hear the drive back quickly in perpetual motion. After a few minutes menu finally appeared disk installation, so I clicked on the button install. I waited several minutes, but nothing happened, so I tried to view the contents of the disc by going to my computer > DVD/CD-RW drive (D, right, click on and select explore menu. ) When I did, the address of the Workstation window bar began to fill with a dark and said gray progress bar "loading (D", I think that with the name of the player or drive after him.). After he took several minutes to fully complete, nothing happened. I waited a few minutes to see if anything would change, (Nothing in fact), I clicked on the X button in the upper right of the window to close. A few minutes and clicks later, the Workstation window was labeled as (not), and the window itself has become dimmed. I started the Task Manager and tried to close the my computer window, but the entire Windows desktop disappeared with her, saying that he will try to restart. Even the Task Manager became inadmissible and quit after you close the workstation. After a few minutes of watching my background (and nothing else), I've ejected the disk, and Windows Desktop reappeared immediately and acted as if nothing had ever been wrong.

  I checked the Device Manager, but neither the DVD/CD-RW drive, nor any of the ATA controllers have been marked; in fact, they all said that they worked correctly with the drivers updated. I ran the diagnostics of the Toolbox ThinkVantage on the disk using a data CD, a CD and a DVD-ROM are different, but in each case, the drive failed the tests and a message jumps to the top box, saying that the discscould is not read because they have been removed or there is a hardware problem. I checked the discs that both before and after I took them out, and they were not scratched; also, all disks are made editor with a company of software or music. I restarted my computer, started the Rescue and Recovery and Ran PC-Doctor from here option. I ran the same drive read tests with the same results of failure. All the time the car was behaving in the same way he had when he did not first read a Disc. Then I removed and cleaned the drive both inside and outside with a can of compressed air. I also cleaned the ultrabay himself. Finally I tried to fix it with Microsoft Fix It, but when it is automatically ejected from the car and I put a drive, the disk was stuck in the drive and Windows frozen as before. I had to restart Windows two times (once with a BSOD) to take out the drive. When the disc has been removed the computer is back to its normal operation once more.

  Please help me, my DVD/CD-RW drive is a Matshi your UJDA775, my operating system is Windows Vista Business and model number of my T61 6457-C15. I tried all the troubleshooting patches and none have worked. I tried the update drivers and using diagnostic software and they have not worked. I tried to disable drag-to-disc burning and it did not work. I have treid remove and clean the drive and that did not solve my problem. I noticed that the driver for the controller "Intel(r) ICH8M-E/M SATA AHCI" is the only related driver that can be undone, so maybe that could fix. I also wonder if a firmware change caused this, and if so, if there is any way I can cancel that. The only other difficulty I have heard of that I have not tried is changing the registry, but I hesitate to do so. I have not tried to boot from the CD drive because I have no bootable CD and I'm afraid that my computer can stay stuck in this mode. I hope someone can tell me what I can do to try to solve this problem, preferably without destroying my computer. Thank you for taking the time to read my post.

  P.S. Just adding a note; I went through the stories of the Microsoft and Lenovo update and related updates only I could find were: ThinkPad BIOS update utility easy ejection, driver Intel Matrix Storager Manager for Windows (32 bit) and maybe one of the Intel chipsets Support two Vista updates. I tried to roll back the driver AHCI, but it has no effect.

  Well, my problem is solved and here's how. I had some difficulty in finding how to contact technical support from Lenovo; online options directed me to the IBM support Web site, which was clearly designed for businesses. By selecting the option "Call technical assistance" on the Lenovo Web site and then selecting my country gave me a number of hotline 24/7. After about five minutes of waiting, a young boy by the name of "Tyrese" answered (I may be misspelling his name), but the connection was so bad that we could barely hear each other. Although he semed eager to help, when I told her my problem the first things he proposed were simple, like cleaning the disc, however, when I told him all my efforts, described above, to solve the problem myself and him read the paper since the diagnostic Rescue and Recovery program, after he checked against its computer database error codes quickly He said that the only solution was to launch a new drive. I was pleased to have secured such a resolution successfully appealed for support in less than fifteen minutes; Apparently, all the work that I did trying to fix it myself had paid off in a way. Unfortunately, although I tried to give my address for him, some of them stay out of the address label, which caused trouble to receive the new drive. Once I got it, I installed using the uninstall & remove (former player), stop, start, insert & install (new disc) method that I've referenced previously in this topic. I use the new drive since then without any problems, so I guess that the only solution was to replace the disk. Also, I noticed that the new drive is a Hitachi, maybe a T400/410 and T500/510 Ultrabay Slim drive, which should help to avoid the problems that other users have had with readers Matshi - ta more elders. I hope this description helps anyone else having a problem with the optical drives on the T61/61P.

• CD rom only reads or writes data

  After several days to burn backup discs, my computer cd rom drive to read data from the drive.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Why my drive hard Boot keep reading and writing for 20 minutes after the start?

  As the title says my HDD Boot continues to read and write for about 20 minutes after the start. Read and write up to 10 GB in the process. I would say a good way to destroy a disc. I have not seen this behavior in any other OS.

  10.10.5 OS version

  Model: Mac Pro

  ID: MacPro3, 1

  Processor: Intel Quad-Core Xeon

  Number of processors: 2

  Total number of cores: 8

  (Vivid RAM) memory: 8 GB

  Any help will be greatly appreciated.

  Thank you.

  Check Console.app and see what happens.   Could be something of a time Machine for Spotlight indexing to a process of runaway of an OS X or a bug in the application.

• Read and write data to the content repository.

  Hi all
  We use the content repository to store a document and images on the web server in the Center.
  So we have created/setup a repository of content on the web center.
  Please proivde me some might document page to get an idea of how I can read and write the date
  content repository.
  You are most welocme to provide some idea /suggestion.
  Thank you
  Arun.

  You are using webcenter spaces or you create a custom application webcenter?

  When you create a custom application webcenter, you can make use of the workflow Documents. Jdeveloper resources catalog, you will find a few flows of Documents job that will allow you to add some components to manage documents in a folder structure.
  You must first create a connection to your content from your application server. This can be done in the Application resources, right-click on the connection and in the context menu, select "content repository". Them you must filll in connection to your content server details. Make sure you have selected "Set as primary connection for document service" because otherwise the document taskflows you deposit on your page will not find a connection.

  Once you have added the connection, you will also find a datacontrol to the content repository. In this way, you can use the datacontrol place the taskflow and you can create several custom tables.
  I'm not sure but I think the datacontrol also include surgery to create the document but I'm not sure...

  And if not enough, you can always do use the webservices provided by content server. In Jdeveloper you can easily create a datacontrol from Web services by providing the wsdl file. UCM provides for services so that you can import the wsdl into your application and you can easily create your own forms checkin, tables...

  Here is some information on how to integrate services document:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_doc_lib.htm

  and here are some others:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_content.htm#BABCCFJH
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10149/documents.htm#WCSUG2635
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e12405/wcadm_documents.htm#WCADM205

  Published by: Yannick Ongena on Oct 8, 2010 08:23

• How to read and write a text file to the folder of the user preferences?

  I'm trying to code for the user to record the plug-in, the first time that the user opens Acrobat after you have installed the plug-in. I want to write a file of registration of preference of the user folder access later to check that they are already registered.

  Is there an easy way to do this? I wrote the code to access the preference of the user folder to search for the file, but I have not been able to code for the write file. All I've found is how to write a PDF file.

  Any suggestions?

  Gregory

  ASFileRead/ASFileWrite

• The instruction at 0x01764b69 referenced memory at 0x00000000. The memory could not be read. Click on OK to terminate the program.

  An error message "the instruction at 0x01764b69 referenced memory at 0x00000000. The memory could not be read. Click OK to terminate the program"appears when I turn off my computer. Could you please tell what is happening with my computer and how to fix it? Thank you.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Run the fix it and check.
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  Method 2:
  Perform a clean boot and check if a third-party software is causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can diagnose disorders of memory on the computer
  by following the steps in the link.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Method 4:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 5:
  If the above steps doesn't help you can run chkdsk from WinRE (Windows Recovery Environment) mode and look for the question.

  See the following link for more information about system recovery options.

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  See the section: to open the Options menu on your computer system recovery System Recovery Options

  Select the command line option. At the command prompt, type the following command and press ENTER:

  chkdsk drive: / r
  CHKDSK drive: / f

  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Previous post: the results.

  Reference links:
  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Previous post: the results.

• Tools Adobe Reader DC does not not after signing the program on the new computer.

  I use Adobe Reader DC on my laptop for months.  I just bought a new computer (all in one office) to replace my computer laptop and downloaded the program to use on the new.  Every time I try to use such tools that combine, organize files, etc. that it takes me to a Web site that shows me connected, but gives tariff plans for the purchase of a monthly subscription (that I have).  What can I do if I could come back to use it on my desktop and have these tools I use most often a function within the program?

  Hi kristenj77,

  I checked your account, you have subscription for Adobe Acrobat Pro DC.

  Acrobat Pro & Acrobat Reader continuous are two different applications.

  Adobe Acrobat Reader DC, is a free application that is used to display PDF files with certain features such as filling in forms, PDF, printing, etc.

  To use combine files, organize, etc. features of Acrobat Reader DC, you must have the subscription for the Adobe PDF pack which is an online service of Acrobat.

  As you have Adobe Acrobat DC Pro subscription, you will be able to use it only on a single system. In order to use it on the 2nd system, you will need to disable it from the first system.

  If you disabled & uninstalled Adobe Acrobat DC Pro from your old system installed again on your new system?

  Kind regards

  Nicos