Wall charger USB high speed will work with Sansa Fuze?

Similar Questions

• Will this work with Sansa Fuze?

  I just received an FYI Emerson iC2196 CD Clock Radio with docking station for iPod - as a gift.

  I have a Sansa Fuze and this was bought to me because it says no entry to connect iPod and other Mp3 players...

  It seems that the "rocket" will link- but I don't want to break anything!

  OK - I'm writing this, I went to this Web page:

  http://www.target.com/Emerson-iPod-alarm-clock-radio/DP/B0013AG3DY

  I see that it says that it has a line-in for MP3 players - so I guess that means that the dock works only for the iPod - Yes?

  Is there a unit similar to this - CD clock (with or without radio) will be also dockable and play the Sansa Fuze.

  I'm not very technical on this stuff - so any advice is greatly appreciated.

  Thank you!

  Ellie

  NEVER plug a Sansa into an iPod dock connector. They may look alike, but they are wired differently. Chances are good that you will FRY your Sansa. If it says "works with other MP3 players", which means that it works by connecting via the headphone jack of your MP3 player, and not the dock connector.

  There is a Timex clock radio that has a dock from Sansa. Search for "sansa clock radio timex" on Amazon or similar sites and you should find it easily enough.

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.

• Working with USB high speed Interface Modul 2.7 in LabVIEW

  Hello

  is there an example works with a USB high speed Interface Modul 2.7 in LabVIEW?

  The EGG is a "Cypress CY7C68013A-56PVXC»

  Thank you

  Best regards, patrick

  Hi patrick,

  I searched on google for the module. The manufacturer is Braintechnology.
  If you need a LabVIEW driver ask them please, maybe it's that they can provide you with a.

  Braintechnology offers a DLL - USB. With a little work, you can include this dll in your LabVIEW project (call library function node).

  The following documents explain how to:

  Integration of external Code with the Shared Library Import Wizard (requires a corresponding header dll)
  http://zone.NI.com/DevZone/CDA/tut/p/ID/2818

  Writing Win32 dynamic link (dll) libraries and qualifying of LabVIEW
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4877

  Example: Passing a variety of Data Types in the DLL for LabVIEW
  http://zone.NI.com/DevZone/CDA/EPD/p/ID/1288

  Kind regards
  N. Ralf
  NIG.

• Need for Speed Hot Pursuit 2 will work with Windows 7?

  Need for Speed Hot Pursuit 2 will work with Windows 7?

  Click on the following link for the game compatibility in the Windows 7 operating system.

  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

• This external modem will work with Satellite L500-1XL, running Windows 7

  Hello

  When in Spain, I need to use the dialing up to the internet through Telefónica.
  I guess that the L500-1XL is not an internal modem?

  This external modem will work with the L500-1XL running Windows 7?

  Thank you very much in advance for your help.

  A

  Hello

  You re right Satellite L500 doesn t have an internal modem, so you need an external.

  I think you can buy every modem that is compatible with Vista. Alternative ask your favorite computer dealer or authorized service provider

  A friend got good experience with USRobotics 56K modem like this:
  [USRobotics 56K USB Faxmodem USR5637 | http://www.amazon.co.uk/USRobotics-56K-USB-Faxmodem-USR5637/dp/B0019LZCEI/ref=sr_1_1?ie=UTF8&s=electronics&qid=1269253039&sr = 8-1]

• Need driver USB high speed for Satellite Pro A10

  I currently have a conflict with the USB port of my laptop da. When I plug a USB device, I get the message that no USB high speed drivers not installed. I had a quick glance in the section download under USB for Satellite Pro A10.

  Please advise where this driver could be found.

  Hello

  What operating system is preinstalled on your laptop? I assume that the Os is not preinstalled with original recovery image. Can you give us more information on this subject?

• HP Pavilion HPE h8-1214: GPU EVGA GTX 750TI will work with my HPE h8-1214

  Hello. I plan to update my graphics card soon. Accoring to this, I have a card Mother Angelica. I read another post here of a user having a h8-1230 with a card Mother Angelica Revision2 , who said the EVGA GTX 750TI was inconsistent with this Council, and that he should look for a version of the 750TI MSI instead.

  I was wondering if the same applies to my PC because my model is older that the other user has been. I prefer to use the EVGA GPU version, as it is cheaper than the MSI one, but I need to know if it will work with my computer. If not, will the labour card ASUS model, or should it be MSI? The map I intend to buy is present (EVGA) or this (ASUS).

  In addition to this, does anyone know if the stock fans and 300W power supply provided with this computer would be appropriate for the new card, or not? I'm looking forward already pass the power supply, but I don't know for the fans. If I were to upgrade the PSU, 430W would be enough, or should I go with 500W? Thank you.

  If anyone in the future who might wonder, I had this GPU works on my computer, but I had to buy a specific version of the map and the way I got it to work was pretty weird.

  You need to buy this version MSI of the card, because the card itself has a switch on to change the UEFI to Jack supported BIOS Legacy. As far as I know, other versions of this card are UEFI only, and this computer does not support UEFI, so he needs a card that can run in the traditional way. It may look like a fit snug in the case, but it does not seem to cause problems and it cools very well with fans.

  I also changed to a block of power SUPPLY Corsair 430W, which seems more than enough for the system, even with the card to load max. You could go to a higher power, if you consider the upgrade of several pieces, or reuse the power supply in a more powerful system later. I have not upgraded fans in the computer and do not seem to have cooling problems.

  Now to make it work...

  I had some questions:

  When I first turned on the computer, it froze on the screen of the POST (the first screen with the HP logo). It would allow me to get into the BIOS, and it would beep 4 times (with long breaks between the two), before finally to a black screen with a cursor blinking and just stay there.

  What finally got it to work:

  I disconnected all the instructors of the map (cables VGA, DVI or HDMI), and then I turned on the computer. Without any monitor plugged, the computer should beep 6 times (the power button LED flashing with it), then the power led turns off. The LED went off as soon as I plugged my monitor into the computer (in my case, I used a VGA cord).

  For the first few seconds, the screen remained blank and does not save a connection. The computer is beeping intermittently for a while, then after about a minute my detected monitor suddenly a signal, and the screen displays the Windows splash screen. I was able to boot into Windows, all right, even if the resolution of the screen will be a little goofy, until you install the drivers.

  I jumped in the driver installation CD, and once it finished installing, I restarted the computer. Now, when it restarted, I had to do the same procedure I mentioned above so that he could start again. Now that the drivers are installed, I don't know if I'll have to do this procedure everytime I restart the computer (don't have not shut down since then), but since I rarely shut down my computer, it's worth it to me.

  Hope this helps someone else, because I know that I spent 10 hours searching for ideas before discovering this solution myself.

  Now that it is running, I have problems and I have run several graphics intensive games on it without any problem with cooling or power draw. It is very quiet, too. Even with a game running on high quality graphics, I can barely hear the fans when there is no other sound in the room.

• What internal DVD +/-RW will work with my Satellite P10-304

  Can someone give me an answer to what internal DVD +/-RW will work with my Satellite P10-304.

  I said a CSD-6012 or DVD +/-RW UJ-820 might work.

  Help, please

  Thank you

  Lee

  Hello

  Have you checked the manual of the Satellite P10?
  Sometimes, compatible CD/DVD players are in the user manual that must be installed on your laptop.
  If you n t have the user manual, then you can download from the Toshiba page.

  However, if you don't get the right info in the user's manual then I would recommend contacting the ASP in your country for details.
  Usually, you can order a player taken in charge of these guys here.

  It is important that you know which drives are compatible because of the different master\slave\c-salt settings.

  Bye and good luck

• DASYLab 5.6 will work with one nor 9171

  I have a NI USB 9171 a universal module with an older version of DASYE Lab 5.6, I have not yet loaded the software. But I was owndering if the Dasylab will work with automation of the measurement? I installed the MY LabView Signal Express, it is just too much and I want to use something more user friendly

  Thank you

  You ask if 15 years old software will work with a new device of NOR?

  Not very likely.

  First of all, the supported operating system is very different - V5.6 only was not supported with XP, Vista, Windows 7 or 8 (they didn't exist!).

  V5.63

  • Windows 95
  
  
  • Windows 98
  
  
  • Windows ME
  
  
  • Windows NT
  
  
  • Windows 2000

  You can upgrade your DASYLab V5.6 V13 and get full current operating system of assistance and full device support OR.

• Laserjet 5 will work with windows 7.

  I HAVE A DESKTOP RUNNING WINDOWS 7 HOME PREMIUM 64-BIT. ONLY HAS 6 USB PORTS NO PRINTER PARALLEL PORT. THIS PRINTER HP LASERJET 5 WILL WORK WITH WINDOWS 7? THANKS, I NEED TO INSTALL A CARD PARALLEL IEEE 1284.

  Hello

  I used a cable similar to this a few years back. It worked for my old HP 1100 (I think) printer.

  http://www.LMC.com.au/products/cables/IOGEAR/575167/IOGEAR_USB2.0_to_Parallel_Adapter_%5BGUC1284B-01%5d

  Hope this helps

• A drive enclosure hard card SBT-EKU25 will work with a Toshiba Satellite L355D?

  As the title indicates, I would like to know if a Sabrent SBT-EKU25 ultra slim USB 2.0 hard drive 2.5 inch pregnant will it work with my Toshiba Satellite L355D model. I've never used a hard drive enclosure before and I just want to be sure that it will work with my computer before buying it.

  The housing of the hard drive, it also says IDE/PATA, but I know not really knowing what that means. I would be very happy if someone would inform me on that as well.

  Thank you for your time.

  MissSakura.

  Hello!

  I don't know, but as I know that this model comes with a SATA (Serial ATA) hard disk drive & enclosure is PATA (Parallel ATA), so it won't work. but you can try and take your laptop to a computer guy and ask him to be sure if the hard drive can be adapted to your external case. Also, if it is a SATA hard drive you can always go for an external SATA enclosure.

  Concerning

  Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

• The Officejet 7140xi will work with Windowds 7?

  A friend has offfered me an old HP Officejet 7140xi All - in - One Printer.  I need a document scanner.  It will work with Windows 7, or do I have to install Windows XP on my old laptop?

  Hi rbj1933,

  Welcome to the Forums of HP's Support. I see you want to learn more about the drivers available for the portable printer Officejet 7140xi.

  There is a full feature software and driver for this printer for Windows XP, but there is only a print driver available for Windows 7 Microsoft base. I have included the document installation of the printer software in Windows 7 for a USB cable connection to see again you. One of the frequently asked questions is how to scan using the basic print driver. I recommend you read this article before decide you if you want to install Windows XP or not.

  I hope this helps!

• X 1 PCI-E 1000 Mbps cards exist which will work with ESX 3.5

  Hello

  I currently have two ethernet Intel Pro GT cards, which work well in ESX 3.5. I wonder if you do PCI-E x 1 1000 Mbps cards available which will work with ESX 3.5? All my PCI slots regular are met, namely.

  Thank you

  Hi, take a look at the Intel Pro1000PT series, the single nic will work on a x 1 bus whilest the dual nic and quad variants will run on a 4 x / 8 x / bus 16 x and are on the HCL, just search under the e/s intel and its high - the only weird is that the HCL it graphic adapter States PT , Dual PT and PT quad, but when you go into the details for the PT adapter (which you'd think was the only port), it says its got 2 ports...

  Thank you

  Neil

• InDesign CS5 will work with MacOS Sierra?

  Has anyone tried to see if InDesign CS5 will work with MacOS Sierra? I have creative cloud and CS5 on my machine, but due to some of the things that I have to work that only work with CS5 to CS6 I have to keep my old software. I hesitate to upgrade to Sierra until I know if InDesign CS5 will work or not.

  If anyone has tested this, I would be recognizing the return flow, thank you.

  It really depends what you do with it, and a large part of the framework has changes in the operating system for how the application is designed to run in. Your workflow can cause problems when the application works for others or you might be able to use it, but keep in mind has more no support for CS5 Adobe or Apple, so do not expect to solve any problems that you can discover.