D1C15UA PAVILION #ABA: MAKE A USB PORT IN THE LAPTOP

Similar Questions

• Pavilion g7 - 1117cl: lost usb port in the laptop

  My wife tried to update to Windows 10.

  He has totally failed and 'lost' the drivers for the USB ports so that she cannot use her mouse.

  We spent MANY hours on the phone with Microsoft as they took control of the laptop and tried to fix it.

  Finally they told us that they believe there is some sort of virus on the disk, they can not delete? and that the laptop should have something on the 'partition' on the disk.

  They were not very clear about this, but he told us to contact HP.

  Our warranty has expired.

  Given this, if I do an original factory reset this will fix the problem or a virus caused a wrong to prevent a resumption of this way?

  Microsoft seems to think that a reset would not fix the problem.

  The laptop came with all the discs.

  We are NOT any sort of expert on computers, so we do not understand much of what they told us and we had problems to understand the accent of the person who was working on the issue.

  @Dfaris,

  Thanks for posting back.  Yes at this point, you will need perform a recovery of the plant on the laptop.  He's going to wipe the drive clean of any possible bad guys and set it back to the original configuration.

  Here is the link to help you with that.

  HP computers - performing a recovery of system HP (Windows 7)

  Thanks again for the post and have a great day.

• HP Pavilion 15-n259TX (two Usb ports on the left does not work)

  I recently lowered the windows note 8 for windows 7 and found that the two usb ports on the left side of my laptop no longer works, that is, they do not detect anything, be pendrives or external hard drive. Can you help me fixed the problem?
  My laptop is HP Pavilion n259TX 15.

  Hello

  Install the driver usb 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64965.exe

  Kind regards

  DP - K

• Pavilion g6: 2 left usb port of the computer hp laptop pavilion g6 does not

  2 left usb port are not work ing after 7 (64 bit) laptops.windows formatting has loaded.two usb ports on left side doesnot answer

  Hello:

  You probably have to install the applicable usb3 driver.

  What is the complete model number or the product number of your computer laptop g6?

  Many products are on the label as well as the serial number.

• Update the drivers of USB Port on the laptop Acer Aspire 4741 x 64 with Intel Core i5

  One of my USB ports does not work. When I check in the Device Manager is saying "no drivers installed for this device. If I click on the update drivers option it tells me that Windows has detected that the best drivers for the device are installed. But when I check the Device Manager it says still no driver installed for the device. I even downloaded and installed the drivers from www.acer.co.za but its not working. What could be the problem?

  See this: Tips for solving common driver problems

• Dock Station LE877AA #ABA: EliteBook 2560p Dock Station LE877AA #ABA: failure of USB Port

  Dock Station LE877AA #ABA comments

  Power button on the laptop dock turns: mouse USB LED lights at the start but cuts when windows starts.

  * Mouse works when connected directly to the laptop (the mouse is good and not the question)

  * When it is docked, ethernet LAN card is working properly

  The dock audio port works correctly with a helmet

  DisplayPort product dock image on HD TV

  What can be done to "activate" USB ports: is there something that I missed?  An action diagnosis of suggestions or questions are appreciated.  Thank you.

  UPDATE: Screenshot of the System Device Manager anchored.

  

  United Nationsversion anchored: has no 'unknown device' http://s6.postimg.org/u4338ky9t/snap00242.jpg .   Now you're wondering how to find the driver: disk comes with docking station doesn't have a drivers...

  Although I have installed the first set of drivers, I ended up click with the right button on the "unknown device" in Device Manager and install the "Generic USB hub" and it works now.

  Thanks for the answers!

• 2 USB ports on the left side of my HP pavilion g6 does not

  2 USB ports on the left side of my HP pavilion g6 does not after I formatted my system, it detects all the devices plugged in these two ports, before operating system was family premium from Windows 7, but now he have professional window 7, what can I do?

  Windows 7 64-bit, install:

  Intel USB 3.0 Host Controller Driver

• Pavilion P7 1020 impossible to find two USB ports at the front as described in the master product.

  The specifications for the P7 Pavilion 1020 has 2 ports USP on the front and 4 USB ports in the back.

  I can't find one on the front.

  Great! Thank you very much.  I would have never found.

• Pavilion, A8M2N - LA, lost usb ports

  I have a Pavilion a1637c I reinstall Win XP on it.  The recommended HP drivers & updates for XP listed here see the BIOS A8M2N - update v 3.10 (sp35111).   It's the 1st update, I tried after XP & his SP2 set.  Now, I've lost the use of my USB ports!  The bios has updated to version 3.10.  I know that the usb ports worked initially because I had loaded the 3,10 flash bios from a usb key.

  I tried to reset the bios to its default values, but it seems that now version 3.10 is the new default.  Is there a way maybe to return to an earlier version of bios?

  I have a card Asus A8M2N - LA NodusM3-GL8E with 4 memory slots.  I saw messages on other models using the other Council A8M2N with links to a flash of the various bios (example here).  Since I'm half messed up already, I hope for a little advice to completely avoid bricking box of this lady.

  Thanks for any help you can offer!

  Well, now I feel like such a dummy...  I started a chat session of support with the support of hp, and his suggestion was to have windows to reinstall the drivers for the usb device.  and now all the usb ports seem to work like a champ.  I feel so bad that this box has gathered dust for that long, that's all what I had to do.

  I hope that others can learn from this!

  After the execution of the sp35111 video update & bios, you may need to use the device mgr and update the drivers for the usb ports controllers, etc. windows.

  You guys thank you for the response back.

• HP pavilion Dv6 no working usb port?

  My HP pavilion dv6 has recently encountered a problem where no usb ports on the computer work, they work if the legacy has a sorce of external power?
  I think it may have been vaused by a bad legacy, what should I do and will be HP attach it as its only 6 months old and still in warranty. ?

  HP should fix, but if you have bad usb ports it is likely needs a replacement of the motherboard so you must send it.

• HP Pavilion DV6-1355dx: all USB Ports do not work

  All the USB port of my laptop, identified above, has stopped working. I tried in many troubleshooting recommended by the operating system (10) and support Microsoft centre but I could not solve the problem. Device Manager still show the (!) exclamation point for all USB ports. Can I have the drivers or a fix that allow me to re - install the Intel® ICH9 Family USB Universal Host Controller?

  Thank you very much

  Carla Hamilton

  The problem is resolved.

  I reinstalled Windows 10 a recommendation of Microsoft Community available to

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/USB-ports-not-working/275b9f17-fd56-4DBF-ba71-c674c68d7060

  I want to thank those who have made efforts to help me on this issue.

  Thank you.

  Hamilton

• HP Pavilion dv6-6130us: My USB ports do not work!

  Hello, I had installed Ubuntu on my computer for awhile, then I decided to re - install Windows 7, and when I did, the two USB ports on the left side of my keyboard did not work. I also have Ubuntu along side windows in a dual boot, and they work perfectly well under ubuntu. I'm having a bit of trouble, and it becomes very frustrating. Yes, there are things that I need to install or drivers? Or am I out of luck?

  Hello:

  Yes, your laptop is probably missing drivers USB3.

  The problem is that there are 3 pilots USB3 from different model on the support page, so please do the following steps and I stood at USB 3 controller your model and I'll post the link to the right driver, he needs.

  If the drivers are not installed, you will see a device named USB controller listed in the category other devices.

  The USB controller will have a little! mark next to him (which means that he needs a driver installed for it to work).

  If you see that, click the USB 3 controller device.  Then click on the Details tab at the top of the USB3 controller window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  On this list and select the second element (Hardware ID).

  After the first string of characters you see in the window.

• USB ports on the side of the w2207h monitor

  I plugged in the USB ports on the side of my w2207h monitor, but I get an error message saying that the USB device has malfunctioned and it is not recognized by Windows whenever I start my computer.  Is it possible to get the USB ports on the side of the screen to work?

  Excellent response. Remove the "unknown device". Then restart.  Only his own to the top of the error.

  It is important to always use 'remove hardware safely', found in the system tray, to select the USB device your disconnect. Just by pulling the cable will cause this error.

  Removed Hanspuppa caused response she said it was a problem with the driver for the monitor. We all make mistakes, it's human. But it's kind of ridiculous to remove the cause of the answer, you make a simple mistake. Not of him to ask, but an empty answer is worse than facing her.

• How to set up Time Machine via a HARD drive connected to the USB port on the router?

  Hi all

  I have an Arris Touchstone Data Gateway DG1670A/TW for my internet / wireless which was provided by my ISP.  There is a USB port at the back of the router and I was wondering if I could connect an external HARD drive to save the two Macbook Pro that I have in my house through Time Machine wireless?  If Yes, could someone provide me the details regarding how to set this up properly?

  I too, was thinking about making a 4 TB HARD drive - 2 and wanted to partition so that half of it would work for Time Machine and the other half I would be able to store photos that I take on my digital SLR and are in Lightroom.  Could this be a problem at all? I partition? or Time Machine just to use the available space and delete older backups to make room for additional photos?

  Thanks in advance for any help.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

• help that my usb ports on the left side do not work

  I have a hp pavilion dv6-6117dx. the usb ports on the left side are stoped working. I need help please...

  A factory restore can't hurt, and it can fix it. First of all, I think I'll try re-installing the AMD graphics driver which usually includes the motherboard drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98292-1&cc=us&DLC=en&LC=en&OS=4063&product=5177781&sw_lang=