Daemon Tools Pro

Similar Questions

• I have remove the version options in the main menu bar in Daemon tools pro advanced 5, now I can't get back them.

  I remove options in the main menu in Daemon tools pro advanced version 5 bar, now I can't get back them, can someone help me how to recover the menu buttons in the user interface of the daemon tools toolbar

  original title: daemon pro tools

  Hello

  The question you posted would be better suited to the community of Daemon Tools. Please visit the link below to find a community that will provide the support you want.
  http://www.daemon-tools.cc/Eng/support

• installation of daemon tools

  I have a problem when installing daemon tools ver.4304 lite in my win 7
  always demonstrated
  "this program need atleast win 2000 and STPD 1.51 or higher, kernel debugger must be disabled"
  even after I install STPD 1.59 win 7 ask to reboot and I'll start all over again and again
  what I have to do 2?

  Daemon Tools does not work on Windows 7.  Until a new Windows 7 compatible version is available, you will need to use another program.  You can use the virtual Clone drive.  It works on Windows 7.  That's what I use myself.

  See you soon

  I have a simple philosophy: just assume everyone is a piece of _ and then be pleasantly surprised if you find someone who is not.

• Daemon tools lite is is not loading

  Hey guys Im having a problem with Daemon tools lite. I get an error message. Bebugger of the core must be disabled... help... .Windows is set to start normally, and I don't seem to find any info. Thank you would appreciate your help

  The kernel debugger settings are accessible via the button Advanced MsconfigStartup tab

• install Daemon tools

  HIII,

  I am could not install daemon tools in my windows 7, please help me

  Contact: http://www.daemon-tools.cc/eng/home. This should help. This isn't a question of Ms. Frenchie

• hardware device after installing daemon tools tsstcorp l633c driver does not it appers unrecognized

  Hello

  After a while of installing daemon tools lite dvd driver tsst corp l633c ther not recognized driver

  It was with the name of DTSoftBusCd00 and tsstcorp l633c 3 drviers

  then I uninstalled the daemon tools but the same problem has not been resolved, then I used the troubleshooting and Device Manager it recognized as CD drive

  try to install the driver he repeats to me device not found please help

  Hello.

  1. you remember to make changes to your computer of the page?

  2. you have multiple DVD burning software installed on your computer?

  3. What is the brand and the model number of this DVD player?

  Follow the below mentioned steps and check if it helps.

  Step 1 Run the fixit from the below mentioned link.

  http://support.Microsoft.com/kb/982116

  Step 2. Follow the link below to run the tool material and devices,

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Step 3 Uninstall and reinstall the cd - dvd drive.
  If the drive is not listed, remove and reinstall the existing drivers.
  To do this, follow these steps:
  a. Click Start and then click Control Panel.
  b. click System and Maintenance, click System and then click on Device Manager.
  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.
  c. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  d. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  Step 4. The firmware was updated.

  
  I would also recommend updating the firmware of the CD - DVD drive.
  You may need to contact the manufacturer for it.

• Measurement tool Pro Acrobat stopped defining the end points, someone else has / sovle this problem?

  Measurement tool Pro XI of Acrobat stopped fine tuning points while I was working on plans today.

  I've used Acrobat for years and this has never happened before. When the use of line, perimeter-line or a region, it fixed endpoint when left or quickly double clicked on, but while I was working on a set of plans this afternoon, he stopped allowing me to the final point. If I double click quickly, my line of area or measure disappears, forcing me to reset my original point again, but never allowing me to complete the measure.

  Its crazy.

  Nothing seemed to happen to change the default behavior of the application.

  I'm on PC Windows 8.1, 8 GB of RAM, Intel i5 - 3210M

  1. I saved my files open and restarted Acrobat: no change in the behavior of the app
  2. I opened an existing plan of pdf that were previously measured and attempted to measure: no change in the behavior of the app
  3. I restarted Windows: still no change in the behavior of Acrobat

  Just the question.

  I disabled apparently brand tool when setting up my plan measure ration with the drop down.

  Its amazing that I have never done this in the past.

  I went into the preferences of measure 2D and concluded that the increase was unchecked, BOOM, as simple as that.

• I have an acer 5739G laptop there dvd - rw but the last month since I installed daemon tools and BD - ROM driver cannot read dvd rom rom. cd single I don't know what to do.

  I try to update the missing drivers, but still does not work

  I uninstall deamon Tools, reboot, then do the test again and if the drive is still problomatic, in Device Manager, uninstall the cd/dvd drive and reboot again

  And if the problems continue to update your drivers from Acer site, specific to your model and the version of win7 bit

• Can I use daemon tools to mount the iso?

  so is can I have install it and then install it on a partition on a drive hard usb

  Hi andrew4935,

  Thank you for visiting forum get ready for Windows 7.

  Theoretically, you can without any problem.  However, it is not a recommended method to install Windows 7, and we cannot support the method of installation is not recommended.   You can always burn Windows 7 on a DVD and the process with the installation from there.
  You need to install Windows on an internal hard drive, not an external drive.  Installation on external hard drive will significantly decrease performance.

  Hope this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pro Tools / first software is safe to install on Windows 7

  Original title: Pro Tools / first

  I have Pro Tools / first recorded which is free. Dose anyone know if it is safe to install. Software that damage adding windows or as etch search engine.

  Thank you

  Hello

  If I understand you when you say the first tool Pro talk about the tool that is used to make the great sounding music. Correct me if I'm wrong.

  If I understand you correctly, you can read FAQ mentioned below, hope you will find all your answers.

  http://Avid.force.com/PKB/articles/en_US/FAQ/Pro-Tools-first-FAQ

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also I recommend you contact the manufacturer of the software for support and more information.

  Hope this information is useful.

• What hides under the operating system and is invisible Disk Warrior and TechTool Pro?

  new background of ignorance

  Maggy apprentice gave me his 2010 MacBook Pro (Snow Leopard) for repair, it was incredibly slow, often cold.

  I threw my skills to it:

  Repair permissions

  Disk utility

  Target mode: Warrior of the disc; Tool Pro technology

  I tried resetting the PRAM and SMC.

  In the target, I also cleared its player (after performing a backup) and tried

  installation of Snow Leopard disc - it stuck.  Installation at a standstill, again and again.

  Problems overall, I could not recovery mode or

  safe mode even though I could get the boot drive and target mode.

  He certainly felt as if the keyboard was in trouble.

  Finally, I copied the backup to disk of my wife, who was also the snow leopard,

  on a portable computer freshly erased and voila - it worked.

  I could then use to wipe the drive, then download and

  install El Capitan.

  After 2 failures, followed by repair disk, he succeeded, I could

  migrate the original backup again and everything is now up-to-date.

  All the software proceeds smoothly, and the keyboard is good,

  Some of the above was conducted in partnership with the Apple phone support

  and the guy said something that bothers me is why I write

  it: -.

  He said that none of the diagnostic and repair tools, I used went deep enough

  to diagnose or repair the software deep that runs under everything else.

  Can I ask here - this looks like PC BIOS?

  and if so, is there really all tools that can diagnose and fix problems here?

  TIA

  Pete

  Disk Warrior takes the sophisticated approach for repair of directory (the same function as the line of fsck command, also headed by disk utility repair disk when it is not the system startup).  And although there is some data recovery options on its own, I would like to use a non-invasive data recovery tool before you try.   As a munged really directly still will leave you without access to your data.  Or a dying hard drive that may have similar symptoms as a bad directory.   All the more reason to backup before you do anything either.

  http://discussions.Apple.com/docs/doc-1689

  TechTool Pro is able to look in depth of the material and tell you if there are hardware issues can be changed or need repair.  Regarding the BIOS, yes the Mac have a BIOS, and they have firmware too.    But any really bad material is only repaired by replacement.  TechTool Pro can tell a lot of cases where it is necessary, with more details than the test integrated hardware Apple.  And in some cases, do a repair like disk Warrior, but it is not infallible.    Since released RAM 128 MB, there is no test equipment that can reliable 100% of the time tell you when the RAM is bad.    However, when it detects as being faulty, you can believe it.

• Install the Mavericks Macbook Pro mid 2015

  Hello people.

  I work with music and my 10 tools Pro works perfectly well on Mavericks... I can't use it with Yosemite, the OS X my mac came with.

  I'm having a hard time trying to get the Mavericks installed on my Macbook Pro 15 retina. Mid 2015.

  It is even impossible to run the installer from USB.

  I used to run the Mavericks perfectly on my Macbook Pro 13 of retina mi 2014...

  I don't know if my mac is having problems to run the facility because of the same format DDD... or if a program mid 2015 totally mac cannot run Mavericks.

  advice?

  Thank you!

  Your firmware of the machine is too new to run the older version of Mac OS X.

• MacBook Pro screen WHITE white

  Hello

  My Mac Book Pro does not, restart after several restart and safe mode. Apple logo, green line bar proceeds at the end and screen turns WHITE.

  Need help - please.

  Thank you.

  Mac OS X - grey appears during startup

  Address start up your Mac to a gray screen. MacIssues

  Question (?) Mark, record of flashing or a gray screen at startup

  It's related, but not identical questions. Their causes are described in based on Intel Mac-Startup sequence and error codes, symbols. Solutions will be found in:

  A globe or a flashing question mark appears when you start your Mac

  Mac OS X - grey appears during startup

  In most cases problems can be caused by one or more of these:

  a. problem with the computer's PRAM - see reset the PRAM and NVRAM on your Mac.

  b. boot, directory of the drive has been corrupted - repair with disk utility.

  c. critical system files are corrupted or deleted - reinstall OS X.

  d. the hard drive is physically non-functional - replace the hard drive.

  Please note that the information I have provided is what Apple recommends, if other users will suggest different solutions found here, then be sure to what they recommend has no impact on your ability to get the Apple continuous service guarantee, if any.

  Please do not start remove disks or change cables unless you know what you're doing and have exhausted other alternatives non-invasive described here. If you perform all knit yourself which is not approved by Apple, then you will void any warranty you can have and lose any other Apple support.

  Fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  The main difference if you use Lion or Mountain Lion, you must first boot from the boot Recovery HD simply HD recovery to perform the foregoing.

  Reinstall Snow Leopard without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  Relocation of Lion/Mountain Lion without erasing the drive

  HD recovery start: , restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu.

  Reinstall/Mountain Lion Lion: Select reinstall/Mountain Lion Lion and click on the button continue.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

• MacBook Pro Panic error - will not start

  I'm getting the following at the start. Have no idea what it is or what to do. Appreciate any advice.  Backup the latest TM is dec 10. But can't even get the stages of recovery to work.  Tests of material D on OK.

  

  If you're in Snow Leopard as your profile is displayed, follow these steps:

  Reinstall OS X without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  If the above does not work, then follow these steps:

  Clean Install of Snow Leopard

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

  size.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Logged, if supported), and then click the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. Once installation is complete your computer will restart in the Setup

  Assistant. After finishing Setup Wizard will complete the installation, after which

  you will use a new installation of Mac OS X.  You can now begin the process of updating

  at the opening of updated software and installing all recommend updates to bring your

  current installation.

  5. If you plan to sell or to give to your remote computer, then proceed as follows:

  Once you reformat your hard disk and reinstall OS X, the computer restarts with a

  Screen of welcome and you prompt to choose a country or region. If you want to leave

  the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

  Press command-Q to stop the Mac. When the new owner turns on the Mac,

  the Setup Wizard will guide them through the configuration process.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

• Win 7 upgrade__cant uninstall intel set__intel pro wireless wireless pro set blocking the upgrade of Windows 7

  Hello

  I am trying to upgrade vista with win 7 on a disk. I can't go forward until I uninstall tools pro game wireless intel.

  It appears in the program lists but I don't have an uninstall option

  help please

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon.

  Mick Murphy - Microsoft partner