DAQmx DAQmxRegisterEveryNSamplesEvent when called.

Similar Questions

• When calling from my iphone, I get a busy signal, but it does not

  Iphone5S: when calling from my Iphone, they get a busy signal, but I do not use it.

  Is do not disturb on? (icon of Crescent Moon in the right line at the top)

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• When calling another country gives the time in this country?

  When calling another country, Skype tell you the time in the country you call?

  Hello and welcome to the Skype community.

  N ° as currently configured the system does not support this facility.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• 7.10 Skype crashes when called or calling on Windows 10

  After the recent update, Skype has started planting when calling or called.

  Here is the error message record:

  Name of the failing application: Skype.exe, version: 7.10.0.101, time stamp: 0x55e99095
  
  Name of the failed module: KERNELBASE.dll, version: 10.0.10240.16384, time stamp: 0x559f3b2a
  
  Exception code: 0xe0fafac1
  
  Offset: 0x000b3e28
  
  ID of the process failed: 0x32b0
  
  Start time of application vulnerabilities: 0x01d0ef1d1febf028
  
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  
  Path of the failing module: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
  
  Report ID: b4ff52ed-8537-403a-a595-49c9c1a74ab3
  
  Faulting full name of the package:
  
  

  The text DxDiag file is attached.

  I see I'm not the one with this issue, but I wasn't able to find a reason for Skype crashing in my case.

  Updated to version 7.11.0.102 solved the problem.

• My iPhone only more 6 does not ring when called.

  MY 6plus of the iPhone does not ring when called.  Any suggestions?

  You have probably already done this, but have you checked that the side button is not set to 'red' to mute calls, or that 'do not disturb' has not been activated accidentally?

  If one of the people are not the cause, have you tried a hard reset - restart by holding down the button power button and home button until you see the phone reboot with the Apple logo on the screen.

• Sequencefileload freezes when calling DLL

  Hello

  I TestStand 4.1, and when calling a DLL on the MainSequence, everything seems to work fine, but if I call him on a SequenceFileLoad TestStand freezes on this step.

  What could be the problem?

  Kind regards

  Daniel Coelho

  Daniel,

  In fact, printf() can be the problem.  Because you are calling it in DLLMain, there are additional considerations you need to keep in mind.  Microsoft has a great page on these considerations here: http://msdn.microsoft.com/en-us/library/ms682583 (VS.85) .aspx

  Some excerpts:

  The entry point function must perform only the tasks of termination or simple to initialization. It should not call the LoadLibrary or LoadLibraryEx function (or a function that calls these functions), as this can create dependency loops in the DLL load order.

  Calling functions that require one dll other than Kernel32.dll can cause difficult to diagnose problems. For example, the calling user, Shell and COM functions may cause access violation errors, because some functions to other components of the system load. Conversely, calling functions of these courses of termination can cause an access violation because the corresponding component may already have been unloaded or errors not initialized.

  I'm sure that printf() is a shell command.  Also, while loading the file in sequence, it is likely that TestStand loading of DLLs or COM objects at the same time, which could conflict with a code that you have in DLLMain.

  Apart from that, Microsoft strongly recommends against any unnecessary code in DLLMain.  If this problem only may not be something to do with the products NOR, but more practical copies creation of DLL in general.

• Error 1097 when calling DLLS in LabView

  I get an error 1097 when calling the LabVIEW provider library. Curiously, the error, the DLL routines still seem to do what is asked of them.  This is the test code.  It opens an Ethernet connection to a controller of axes Galil, he asks (possibly) the value of its internal clock, and then closes the connection.  Each call library function returns error 1097 but "valve function" I32 error number is always zero. Open function causes the connection to be opened, the command function causes the send command and receives a reasonable answer, narrow funtion seems to cause the connection to be closed.

  

  Here is what I see when I run the test:

  

  Also directly configure call-library functions, as I did in this VI, I also tried using the import-shared-library Wizard to create a vilib of functions of the DLL and I get the same behavior and errors when I use these functions.  I tried to tweak some of the data types in my configured manually call library functions to see if I could find a combination that worked better with the library, but had no luck there.

  I use the x 86 version of the DLL with v2014 LabVIEW 32-bit on a 64 bit windows system 7.  I see that the error on the two computer systems of different work configured in this way. I see a similar error on a home computer with just the RTE of 2014 installed. The manufacturer says they can not reproduce the error. I always saw the error over multiple versions of their library DLL.

  In the attachment ZIP it has a link to the DLL library on the manufacturer's website. There is also a copy of the VI, the DLL and a large part of how-to-use documentation that accompanies the DLL.

  I was hoping that someone who was familiar with the use of the call-library function might take a peek at what I do and see if an error could be spotted.

  Unable to find an error, I did, I would be happy to suggestions on how I could solve this. Little seems to me like there may be a problem with the library. The manufacturer, Galil, said that they have opened a log with OR to see if NEITHER could help but since Galil said they can not reproduce the problem and provide an example of the NC, it really went anywhere.

  Given the decoration of symbol names as exported by the DLL I "m convinced that you must change the stdcall calling convention.

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• LabVIEW crash when calling matlab script?

  My version of labview 8.6, Matlab is 7.1. In the beginning, I always get error 1047 when calling matlabscript, then I downloaded recommended matscript.dll (7.1.0.2) and replace the original one (8,6) with this one. 1047 error does not happen. And the matlabscript code can be executed. However the labview crashes after that Matlab is called.

  In fact my matlab file works well. At the end of the matlab code, data must be included on the photo. And it is. But after the image is shown, my labview breaks down, and when I reload the labview, it only invites me 'the last time you run labview, it is not stopped normally. The following files are automatically saved and are available for recovery.

  I used same monitor recommended treatment. But I can't find any reason. I've removed the scriptnode output, it does the same thing.

  anyone has a suggestion. I really appreciate your help.

  Jessie

  I would say the matscript DLL that you copied on the removal and run a repair on the LabVIEW installation to see if that replaces the missing files.

• Runtime Exception to when calling ApplicationEntryPoint.run ()?

  Hi Iam using JDE 4.5.0, jdk 1.6

  At the opening of the app in the Simulator iam getting error below in the debug window. And it's show RuntimeException occurs when calling ApplicationEntryPoint.run (). below the class implements ComponentVO Persistable.

  Class 'com.adea.blackberry.ComponentVO' multiply defined. Error starting zawyademo: 'com.adea.blackberry.ComponentVO' multiply defined class.

  Please help me I hit here.

  Concerning

  Sunil.G

  You have this class defined more than once in your applications or libraries?  I recommend also clean.bat running in the directory of Simulator to reset the BlackBerry Simulator returns to its default state.  This will remove all the applications and could clean up old libraries that you use no more.

• Error when calling Fusion R9 on Service SOAP premise of JDeveloper 11.1.1.7

  Hi team,

  Here is the WSDL Iam I invoke:

  . http://fusionapp < clientName > .com:10607/prcPorCreateReq/CreateReqService? WSDL

  OER WSDL, example: https://fusionappsoer.oracle.com/oer/custom/r9/oer/oracle/apps/prc/por/createReq/createReqService/CreateReqService.wsdl

  Client Java code:

  public static void main(String [] args)
    {
        //setup security feature with OWSM policy
        SecurityPolicyFeature[] securityFeature =        new SecurityPolicyFeature[] { new       SecurityPolicyFeature("oracle/wss_username_token_client_policy") };
      createReqService_Service = new CreateReqService_Service();
      CreateReqService createReqService = createReqService_Service.getCreateReqServiceSoapHttpPort(securityFeature);
      // Get the request context to set the outgoing addressing properties
      WSBindingProvider wsbp = (WSBindingProvider)createReqService;
      WSEndpointReference replyTo =   new WSEndpointReference("http://fusionapp.techmahindra.com:10607/prcPorCreateReq/CreateReqService?WSDL", WS_ADDR_VER);
      String uuid = "uuid:" + UUID.randomUUID();
      wsbp.setOutboundHeaders( new StringHeader(WS_ADDR_VER.messageIDTag, uuid), replyTo.createHeader(WS_ADDR_VER.replyToTag));
      
        // Add Security Headers below if any Authentication is required.
        wsbp.getRequestContext().put(WSBindingProvider.USERNAME_PROPERTY,       "nitin");
        wsbp.getRequestContext().put(WSBindingProvider.PASSWORD_PROPERTY,       "Welcome123");
        // Add your code to call the desired methods
        long requisitionHeaderId =1234 ; 
        
        RequisitionHeader variableName; 
  
      // Add your code to call the desired methods.
          try {
              System.out.println("Invoking get req method");
              variableName = createReqService.getRequisitionHeader(requisitionHeaderId);
          } catch (ServiceException e) {
          }
      }
  

  Policy feature of security referred to in the WSDL document

  "" < policyReference xmlns:wsp= "http://schemas.xmlsoap.org/ws/2004/09/policy" " URI="#wss_saml_or_username_token_service_policy" wsdl: required="false"/ >"
  "" < policyReference xmlns:wsp= "http://schemas.xmlsoap.org/ws/2004/09/policy" " URI="#wsaddr_policy" wsdl: required="false"/ >"
  "< wsdl: Operation name="getRequisitionHeader">"

  Exception when calling

  C:\Oracle\MiddlewareJdev11117\jdk160_24\bin\javaw.exe -client -classpath D:\Sridhar\Software\p17888411_R12_GENERIC\jdevhome\jdev\mywork\FusionR9CreateReqServ\.adf;D:\Sridhar\Software\p17888411_R12_GENERIC\jdevhome\jdev\mywork\FusionR9CreateReqServ\FusionR9CreateReqServ\classes;C:\Oracle\MiddlewareJdev11117\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\MiddlewareJdev11117\oracle_common\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MiddlewareJdev11117\modules\com.oracle.toplink_1.0.0.0_11-1-1-5-0.jar;C:\Oracle\MiddlewareJdev11117\modules\org.eclipse.persistence_1.1.0.0_2-1.jar;C:\Oracle\MiddlewareJdev11117\modules\com.bea.core.antlr.runtime_2.7.7.jar;C:\Oracle\MiddlewareJdev11117\modules\javax.persistence_1.0.0.0_2-0-0.jar;C:\Oracle\MiddlewareJdev11117\oracle_common\modules\oracle.webservices_11.1.1\wsclient.jar -Djavax.net.ssl.trustStore=C:\Oracle\MiddlewareJdev11117\wlserver_10.3\server\lib\DemoTrust.jks com.oracle.xmlns.apps.prc.por.createreq.createreqservice.CreateReqServiceSoapHttpPortClient
  Jun 3, 2015 5:23:59 PM weblogic.wsee.jaxws.spi.WLSServiceDelegate addWsdlDefinitionFeature
  SEVERE: Failed to create WsdlDefinitionFeature for wsdl location: http://fusionapp.techmahindra.com:10607/prcPorCreateReq/CreateReqService?WSDL, error: com.sun.xml.ws.wsdl.parser.InaccessibleWSDLException, message: 2 counts of InaccessibleWSDLException.
  SEVERE: java.io.FileNotFoundException: .\config\jps-config.xml (The system cannot find the path specified)
  SEVERE: java.io.FileNotFoundException: .\config\jps-config.xml (The system cannot find the path specified)
  INFO: WSM-09004 Component auditing cannot be initialized.
  Invoking get req method
  INFO: Recipient Alias property not configured in the policy. Defaulting to encrypting with signers certificate.
  Exception in thread "main" javax.xml.ws.soap.SOAPFaultException: access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/por/createReq/createReqService/CreateReqService#getRequisitionHeader invoke)
   at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
   at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122)
   at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
   at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
   at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
   at $Proxy43.getRequisitionHeader(Unknown Source)
   at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
   at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
   at java.lang.reflect.Method.invoke(Method.java:597)
   at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
   at $Proxy44.getRequisitionHeader(Unknown Source)
   at com.oracle.xmlns.apps.prc.por.createreq.createreqservice.CreateReqServiceSoapHttpPortClient.main(CreateReqServiceSoapHttpPortClient.java:56)
  Process exited with exit code 1.
  

  Please let me know how to configure the java client based on the WSDL file secuirity policy. I would like to know where iam missing.

  I have raised several MOS - SR Oracle, but no response until now.

  Concerning

  Sridhar

  Here's the code that worked:

  Public Shared Sub main (String [] args)

  {

  installation with GOSA policy security feature

  SecurityPolicyFeature [] securityFeature = new SecurityPolicyFeature [] {new SecurityPolicyFeature("oracle/wss_username_token_client_policy")};

  currenciesService_Service = new CurrenciesService_Service();

  CurrenciesService currenciesService = (securityFeature) currenciesService_Service.getCurrenciesServiceSoapHttpPort;

  Get the request context to set the outgoing address properties

  WSBindingProvider wsbp = (WSBindingProvider) currenciesService;

  ReplyTo = WSEndpointReference

  new WSEndpointReference ("http://fusionapp.techmahindra.com:7406/finGlCurrManageRateSetupService/CurrenciesService?") WSDL"(, WS_ADDR_VER);"

  String uuid = "uuid:" + UUID.randomUUID ();

  wsbp.setOutboundHeaders (new StringHeader (WS_ADDR_VER.messageIDTag, uuid), replyTo.createHeader (WS_ADDR_VER.replyToTag));

  Add headers of following security if authentication is required.

  wsbp.getRequestContext () .put (WSBindingProvider.USERNAME_PROPERTY, "FAADMIN");

  wsbp.getRequestContext () .put (WSBindingProvider.PASSWORD_PROPERTY, "Welcome1");

  String conversionType = "Corporation."

  VariableName of DailyConversionType;

  Add your code to call the desired methods.

  try {}

  System.out.println ("method call");

  variableName = currenciesService.getDailyConversionType (conversionType);

  System.out.println ("Value of the Variable name-->" + VariableName);

  System.out.println ("Data-->" + variableName.attribute1);

  System.out.println ("Type of Conversion-->" + variableName.conversionType);

  } catch (ServiceException e) {}

  }

  }

  Concerning

  Sridhar

• Case function can be used as a parameter when calling a procedure, please advise...

  Case function can be used as a parameter when calling a procedure, please notify

  The daily procedure is called with the parameter 3 following one of the parameters using a function box between them as shown below.

  Daily_Ins (c1.p_mtrid, c1.p_UOM CASE WHEN "KWH" THEN 1 ELSIF 'KW' THEN 2 END, v_dateHold);

  In my opinion, using decode is illegal, so I think that I cannot say something like :

  Daily_Ins (c1.p_mtrid, ( decode c1.p_UOM, "KWH", 1 'KW', 2), v_dateHold);

  I think I just found something on the net

  SQL > DECLARE

  2 wages NUMBER: = 20000;

  3 employee_id NUMBER: 36325 =;

  4

  5 PROCEDURE give_bonus (emp_id in NUMBER, bonus_amt number) IS

  6 BEGIN

  7 DBMS_OUTPUT. Put_line (emp_id);

  8 DBMS_OUTPUT. Put_line (bonus_amt);

  9 END;

  10

  BEGIN 11

  12 give_bonus (employe_id,

  13 CASES

  14 salary when > = 10000 AND salary<=20000 then="">

  15. WHAT salary > 20000 AND salary<= 40000="" then="">

  16. WHAT > 40000 salary THEN 500

  17 0 OTHERWISE

  18 END);

  END 19;

  20.

  PL/SQL procedure successfully completed.

• Error occurs when calling remote ADFService11G service. Details: ADFException-3007: The ViewObject "AppModule.VO3" is used as a destination more than a ViewLink. (HY000)

  Hello

  Thanks in advance for helping me to solve after publication:

  I tried to run a report of OBIEE including data model comes from the layer of the ADF.

  In my module of the application, I have 5 display objects:

  For Ex: VO1 VO2 VO3, VO4 VO5

  And I show the links between: VO1 and VO2 (lets say: VO1_VO2_VIewLink).

  VO2 at VO3 ((permet de dire: VO2_VO3_VIewLink)), VO4 is related to the ((permet de dire: VO4_VO3_VIewLink) VO3) & VO5 is linked to VO3 (lets say: VO5_VO3_VIewLink)

  When I deploy this application on OBIEE and run a report with objects of:

  (1) VO1 and VO2-report works fine

  (2) VO2 and VO3 -report works fine

  (3) VO4 and VO3 -report works fine

  (4) VO5 and VO3 -report works fine

  (5) VO1, VO2, VO3 -report works fine

  It is when I run the report with the objects of

  VO1 and VO2 VO3 VO4, it throws an error message:

  "Error occurs when calling remote ADFService11G service. Details: ADFException-3007: The ViewObject "AppModule.VO3" is used as a destination more than a ViewLink. (HY000) »

  OBIEE Version is: 11.1.1.7.0 (with no patches) basis data: 11 GR 2, Jdev:11.1.1.7.0

  Kind regards

  RAM.

  I was able to resolve this error by changing my AppModule datamodel application, by changing the cardinality between VO3 and any other 1: n VO (VO3) to 1 (VO3): n. making VO3 as source VO object rather than view destination object.

  Kind regards

  RAM.

• Why CRLF are treated differently when called via bridgetalk?

  I stumbled upon another mystery: when I run a script directly in ExtendScript, he interpreters '\r' as a CRLF. Yet, when I called him by bridgetalk, the '\r' was left as text.

  This strange behavior is if I set the target to photoshop or not. Can someone tell me why please?

  Here's the unit test (CS6, Windows 10)

  -L' script call:

  #target bridge

  var bt = new BridgeTalk;
  BT. Target = "photoshop."
  var myPath = "~ / Desktop/testCarriageReturnSubstitution.jsx ';"
  var ScriptFile = new queue (myPath);
  fOpen var = scriptFile.open ('r');
  script var = scriptFile.read ();
  $.writeln (script);
  BT. Body = script;

  BT. Send();

  -Test script:

  #target photoshop

  var badString = ' \rTitle\rCity, State - USA December 2015 ";

  var nouvelleChaine = badString.replace ('\n', "\n");

  $.writeln (badString);

  $.writeln (newString);

  The runtime directly via ExtendScript result:

  Title

  City, State - USA December 2015

  Result: not defined

  Result when called via the calling script:

  Result: true

  \rTitle\rCity, State - USA December 2015

  Thank you

  / Tim

  Thank you, Uwe for responding! I tried that before posting, and the result was '\\r '. It seems bridgetalk converts these escape characters to the text.

  I found another thread (Re: \n doesn't work does not correctly) addressing the question, pointing way back to CS2 times! Wonder why Adobe does not solve the problem, and/or documenting this bug to save us some headaches, or maybe they he documented in a dark place.

  Workaround to this problem is to use decodeURI and use the hexadecimal code for these special characters. In my original unit test, I have changed the script photoshop for the following:

  #target photoshop
  var title = "title text";
  var CityState = "San Francisco, California";
  var badString = ' \r'+Title+'\r'+CityState;
  var goodString is decodeURI (Title + "%0d" + CityState);.

  $.writeln (' string bad encoding: ', badString);
  $.writeln (' string right encoding: ', goodString);

  Result:

  A string of bad encoding: \rTitle Text\rSan Francisco, California

  Right channel coding: title text

  San Francisco, California