Data files disappeared

Similar Questions

• Data file disappeared

  Good evening

  I did a quick run through in some 200 + images, cropping and white balance correct those on the laptop.

  Bridge 6 CS on the cell phone, I can see the image cropped, but also the ranking given every image, even if I move the images in another folder...

  Now I copy the entire folder of the laptop to the desktop and open the folder in the Bridge CS6 on this desk. Now, all the images are there, but none are culture, balance of whites or the classification data.

  He has no .xmp files intended for CS5.

  How can I get the cropping / white balance / ranking data from the images on the laptop?

  Thanks in advance for your help.

  Michael

  Hello, you want to export the file cache in CS5. And ensure that the XMPs are in the folder when you browse it with CS6. Remember that there is a bridge forum: http://forums.adobe.com/community/bridge/general

• Still not get 2016 Outlook and Contacts calendar to synchronize with iCloud. iCloud data file has not been in Outlook but iCloud add-in is enabled.

  I use Windows 10 (v1511), 2016 Outlook Office 365 and iCloud 5.2. Mail is downloaded directly to Google mail Outlook. Calendar and Contacts live in iCloud and work properly in my iPhone, iPad and the app iCloud on the PC. Its just perspective that is not sync with iCloud to get these items.

  In outlook, the Setup program is not set up a data iCloud file ' * APLZOD.pst ' in the account tab data file settings. When you try to install a new data file in Outlook in account settings, the iCloud type available, but when you select what the error message says that this cannot be set in the iCloud Control Panel

  I tried several complete removal and then re - installs to iCloud for windows and have also done with the firewall and antivirus disabled active.

  I also deleted the Outlook data file * *.ost and allowed the installation program rebuild this application fee.

  The iCloud "add to" Outlook "add-ins" is active.

  The calendar, Contacts and tasks of the iCloud Panel section is checked when re-built, but after Outlook is running this section has not been verified and when you try to check it out and apply the change he UN-checks itself.

  Sorry for the long post, but I tried to solve this problem for some time.

  Thank you

  Chris

  The same problem.  I use iCloud for Windows 5.2 and Windows 10, 2016 office.   Everything worked well for several months until a few months ago, when sync calendar has stopped working.   I've updated iCloud of 5.1 to 5.2 but that just killed altogether.  Tried uninstalling icloud and relocation costs.  No luck.  When the iCloud settings appears, I check the box for the calendar and Contacts.  The driver then disappears.   I check again and it sticks.  But no messages on 'configure '.   When I close and reopen, the box is unchecked.   A few days ago I had the same problems the other another thread where he would show "set up" spinning forever (well, 30 minutes before giving up).   Not sure if it's an Apple problem or a problem of office.  But this is of course a problem.

• Files disappeared after restore of Windows Vista recovery

  Hi, there, PC of my little brother had a big problem today. Coz the files disappeared after restore of Windows Vista recovery.
  How can he recover his files and other data?
  Thank you to you all.

  Hello

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• All my documents files disappear after I emptied my trash. Any way to restore these files?

  All my document files disappear after dumping trash.

  Is it possible to restore these missing files without a backup.

  Hello

  the more you use your computer less chance you'll have to recover your data as it will be replaced by new files

  try this program to recover data:

  http://www.Piriform.com/Recuva

• I CAN QUERY A TABLE EVEN AFTER THE DELETION OF THE DATA FILE

  Hello

  Can someone explain to me the reason why I am able to interview some tables even after the deletion of the data that are associated with file?

  SQL > select table_name, tablespace_name from dba_tables where owner = 'SCOTT ';

  TABLE_NAME, TABLESPACE_NAME

  ------------------------------ ------------------------------

  TEST2 USERS

  TEST USERS

  SALGRADE USERS

  USERS OF BONUS

  USERS OF THE EMP

  USERS OF DEPT

  6 selected lines.

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  [oracle@localhost orcl] $ rm /app/oracle/oradata/orcl/users01.dbf

  [oracle@localhost orcl] $ sqlplus scott/scott

  SQL * more: Production version 11.2.0.1.0 on Mon Mar 30 21:35:54 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select count (*) from test2;

  Select count (*) from test2

  *

  ERROR on line 1:

  ORA-01116: error opening the database file 4

  ORA-01110: data file 4: ' / app/oracle/oradata/orcl/users01.dbf'

  ORA-27041: could not open the file

  Linux error: 2: no such file or directory

  Additional information: 3

  SQL > select count (*) of the test;

  COUNT (*)

  ----------

  5000

  SQL >

  The first output is as expected. But why am I still able to query the table of test, even if the data file has been deleted.

  Hello

  The process of database have a file handle for the data file - this remains even when the file is deleted (it disappears from the normal file system navigation)

  You can see if you have lsof installed

  just try

  lsof | grep datafile_name

  Once the database is restarted and the released file handle so you will not be able to do this any more - and in fact you will get errors when it can't find the file.

  See you soon,.

  Rich

• Alert entered for the missing data file

  I'm trying a simple payback scenario: remove a data file to a tablespace that is normal when the database is running, and the data file has been saved.
  
  Before, the control point ends normally (I guess that still retains the file inode handle Oracle). When I choose to dba_data_files, the error occurred:
  

  SQL> alter system checkpoint;
  
  System altered.
  
  SQL> select count(*) from dba_data_files;
  select count(*) from dba_data_files
                       *
  ERROR at line 1:
  ORA-01116: error in opening database file 10
  ORA-01110: data file 10: '/u01/oradata/data01.dbf'
  ORA-27041: unable to open file
  Linux Error: 2: No such file or directory
  Additional information: 3

  To my surprise, nothing has been recorded in the alerts log. And no trace of the files not generated in udump. And Oracle has refused to restore the data file when he was running.
  
  The message appeared in the journal of alerts when trying to stop the database. After abort shutdown (Oracle refused to stop immediately) and restart the instance, I was able to restore and recover the data file.
  
  This is the expected behavior? If so, how you would detect files of missing when db is running?
  
  
  Oracle: 9.2.0.6, OS: RHEL3

  1. it has not detected by the control point caused by a switch logfile because the file is not actually missing. Like other - inded you! -have, Unix/Linux, you can remove a file at any time, but if the file is in use, the inodes are allocated and the process using it continues to see it very well because it. Because, at the level of the inode, it IS absolutely still there! Either by the way, it is needless to say to make a logfile switch, because as data files are concerned, which does nothing, that the command of alter system checkpoint that you already tried.

  I used to do demos of how to recover from the complete loss of a controlfile in Oracle University classes: I would like to make a burst of rm *.ctl commands and then significantly question the command checkpoint... and nothing happened. Very demoralizing the first time I did it. Deliver a force of startup, however here the inodes are released at that time, files are actually deleted and start falls in nomount State. Bouncing the instance was the only way I could get the data base to protest against the removal of a data file, too.

  2. No, if a file has disappeared in a way allowing to detect Oracle, it wouldn't matter if the folder was empty because he's worried the presence/absence of the datafile headers. They need to be updated, even if nothing else does.

  3. it would be in the alerts log if SMON has detected the lost file at startup (one of his jobs is, explicitly, to verify the existence of all the files mentioned in the control file). CKPT would not trigger an alert, because concerned, all right. Inodes are still held, after all. Your attempts to create tables and so forth inside the lost file do not generate display errors (I think) at this time, it's your server process that seeks to do things for the file, not CKPT or pre-existing other background process, constantly running.

  4. it's specific to Unix, anyway, that Linux is a Variant.

• So with the new update every attachment I get an Outlook user is converted in a winmail.dat file.  How Apple could make a such big screw-up?  Even when I check gmail via apple mail conversion is made, but if I connect to google, the files are

  Why is each attachment outlook, I get in the Mail now converted in a winmail.dat file?  I don't want to go make an app to allow me to open these files - it is something stupid on the part of Apple - please correct!

  Tell Apple - http://www.apple.com/feedback/

• Mac adds the extension txt for dat files

  Hello

  I download the files with the extension dat but when are already downloaded I see another extension txt (F4409.dat.txt). I need to use dat files in another program and convert my file to text file prevents me to do. I would like to block the conversion of files without my approval on my mac. Remove the additional extension (.txt) does not help. I still can't use file in a program that I need for analysis of the data. Help, please.

  AS

  Download from which site?

  Download of what app (a browser)?

• I have an old data file of firefox from a transfer of the computer I did and I want to get all the sites that I had organized how can I do this?

  If earlier I transferred my old files from the computer to my new computer and when I did I tried that my firefox books brands added when I did he just make an old firefox data file. I went in there it has the markings of books, but the problem is it is not really readable a little mixed up and I want to know if I can import it to my only current or somehow get it organized so I can at least see them outside or on a note pad just each bookmark on its own line? I added a picture what it looks like

  You can use the notebook (Firefox/tools > Web Developer) to inspect and edit files in JSON format quite easily.
  There is a "Pretty Print" button to add line breaks.

  • https://developer.Mozilla.org/Tools/scratchpad

• After update to version 31.2.0 thunderbird keeps "not responding" and generate popstate.dat files

  Help please
  Software opens OK and incoming messages are downloaded, software captures suddenly a "not responding" that requires the user to close the window.
  The software also keeps generating popstate.dat files with nothing in it?
  I tried to disable all the modules and plugins, but makes no difference.
  I have rebuilt the overall messages file - db.sqlite and I have re-installed a fresh copy of 31.2.0 but still the same.

  I have no suggestions more other than to try a new profile.

• Stop the quicktime open .dat file

  I need to download a data file with the extension .dat from a web page link, but when I click it it opens Quicktime. I looked in preferences-Applications to try to change the management of the .dat files, but I see no entry for them. How can I do it gives me the option to save the file rather than open Quicktime?

  You can click the link to the .dat file and use ' save the link under ' to save the .dat on the hard drive.

• El Capitan in all applications, File > Open displays all by date. Icons by date, by date, by date, file names. I hate this. How can I view by NAME, as previous OSX?

  With the help of El Capitan, in all the applications, "File > Open" all groups by date (see red circles below). Icons by date, date, genre, date, all by date, file names. I hate this. How can I do view by NAME, as the previous OSX?

  You have chosen to organize the display by date. Change votes to zero, or name.

  Reorganize the key one above "day" is in yesterday on your screenshot.

  

• When I back up my data files, I want to understand my favorites. Which folders and/or files should I include in my backup routine?

  Under Windows XP. With the help of "ntbackup" to do the job. All software is located in C:, all my data files are on a second physical drive E:.

  Firefox stores the bookmarks and the browser history in places.sqlite and either use a HTML file or creates a backup of the HTML for the bookmarks.
  
  There are 10 daily rotating backups of JSON in the bookmarkbackups folder in the Firefox profile folder, one for each day when Firefox is started.

  You can make Firefox create an automatic HTML (bookmarks.html) backup when you exit Firefox, if you set the pref to true on the subject browser.bookmarks.autoExportHTML: page config you can open via the address bar.

  • http://KB.mozillazine.org/browser.bookmarks.autoExportHTML
  • http://KB.mozillazine.org/Export_bookmarks

  See also:

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• downloaded files disappear once downloaded from the download window. How to stop this means?

  version 3.6. When I download a file that the download window appears and the file is downloaded. The second, he finished the download of the file he disappears. Then I have to go to download the file in Explorer to victory to treat the file - a pain ~! How can I stop the file disappear, please?

  Check if the solutions proposed in this article helps solve your problem: the downloads window is empty.