Data member $System.logoff

Similar Questions

• textEntry object - visible data member does not

  Hi people,

  I work at lookout 6.6 with a project developed at lookout 6.1.

  I was very happy to discover that the textEntry object has had an upgrade in the 6.6 and the added visible data member.

  I have introduced the necessary logical expressions on the data member, but the visible member of the does'n is not working properly: if its value is false, the textEntry object is not visible on the Panel, but that's all by allowing the entry (this on the textEntry object converted from 6.1 to 6.6).

  I create a new project of 6.6 with a textEntry object, but the problem is still present.

  I think that we are looking for a little bug.

  Goodbye, have a good time

  Sorry, it looks like a bug.

• choice of the model of design for data acquisition system

  Hi all

  I have a problem on the selection of the model design / architecture for a data acquisition system.

  Here are the details of the desired system:

  There are data acquisition hardware and I need to use by looking at the settings on the user interface.

  the period of data acquisition, channel list to analyze must be selected on the user interface. In addition, there are many interactions with the user interface. for example if the user selects a channel to add scanlist, I need to activate and make it visible to others on the user interface.

  When the user completes the channel selection, then he will press the button to start the data acquisition. Then, I also need to show the values scanned on a graph in real time and save them in a txt file.

  I know that I can not use producer consumer model here. because the data acquisition loop should wait for the settings to scan channels. and it works on a given period by the user. If the loop of user interface makes higher then loop (loop data acquisition) of consumption. This means that queue will be bigger, larger. If I use notifier this will be some data loss comes from the user interface.

  y at - it an idea about it? is there any model of design suitable for this case?

  Thanks in advance

  Best regards

  Veli BAYAR

  Software for embedded systems and hardware engineer

  Veli,

  I recommend the model producer/consumer with some modifications.

  You might need three loops.  I can't tell for sure from your brief description.

  The loop of the User Interface responds to the user for configuration entries and start/stop of acquisition.  The parameters and commands are passed to the Data Acquisition loop via a queue. In this loop is a machine States that slowed, Configuration, Acquisition and stop States (and perhaps others). The data is sent to the processing loop through another line. The processing loop performs any data processing, displays the data from the user, and records to file. A registrant can be used to send the Stop command or stop the loop of the UI for other loops.  If the amount of treatment is minimal and the time of writing files are not too long, the functions of processing loop might be able to happen in the case of the UI loop timeout structure of the event.  This makes things a little easier, but is not as flexible when changes need to be made.

  I'm not sure that there is a type of design for this exact configuration, but it is essentially a combination of the models Design of producer/consumer (data) and producer/consumer (events).

  Lynn

• I can't date MY SYSTEM, I GET a CODE of ERROR 'WindowsUpdate_8024D00A '.

  I can't date MY SYSTEM, I GET a CODE of ERROR 'WindowsUpdate_8024D00A '.

  What is the build number of your version of Vista
  «If you are looking for the number of exact version of Windows Vista, you can find it by running 'winver'.»

  Something before 6000 is the pre-release version of the software

  TaurArian [MVP] 2005-2010 - Update Services

• Hoe komt het nou dat als ik P.C.opstart ik lack keer het bericht dat the system treat is hersteld van een ernstige care

  Hoe komt het dat als ik p.c. opstart ik lack keer het bericht dat the system treat is hersteld van een ernstige hell.

  Of handtekening van of hell is: code 1000008e JIU. BCP1 BCP2 0000005 BD210CDC BCP3:AB9D287C BCP4 00000000 SP:3 OS Ver: 5 - 1-2600-0
  256-1 product
  ER zijn verder geen gevolgen van of laughing at van het herstel
  Teddy W.Boltze

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  Kies uw taal vervolgkeuzelijst onderkant van aan ITU of pagina om your question you posten in Taal van uw keuze. Post on the forum without jij het is voor Frans. ALS I niet vinden baking taal, support van jullie voor boven additional international Geraardsbergen kan

  http://answers.Microsoft.com/nl-NL/site/setlocale?URL=http%3A%2f%2Fanswers.Microsoft.com%2Fnl-NL%2Fwindowslive%2Fforum%3Ftab%3Dunanswered

• Display the date current system and the time in a form

  Hello experts around the world.
  
  I have this little minor challenge I'm having trouble in the corners.
  
  I have a form and I want to display the date current system and time so when I save the form his record with the date displayed.
  
  I tried sysdate, & sysdate and & sysdate. in the default part with static text with memories of State meetings.
  
  So any help or suggestion would be a great help :)
  
  Thank you

  Hi kevin

  write the script in the HTML header below.

  It will give at once, you can set this variable in the variable text box element.

  or else check the below link in java script

  http://www.McFedries.com/JavaScript/DateTime.asp

  see you soon,
  Shan

• Satellite A500-1CO - loss of data after system restore

  Hi all, because the system was slow I decided to restore the system using the DVD of restoration system (1,2). The problem is that I have not saved anything from drive D, and after the restore, all files have been deleted. My logic was unaware that the restoration apply to drive C (system disk) and let the D drive as it is, but I was so wrong.

  Is there a way to recover all or part of the lost data?

  Please help me. Thank you.

  Hi mate

  Unfortunately, I think that there is not much to do now.
  Recovery DVD redefines the laptop to factory settings and, therefore, this disc format the whole HARD disk and also all the partitions and, therefore, you will lose all data if you n t backup this before starting this procedure.

  You should read the user manual or information before starting the recovery. :(

• Exchanging USB data acquisition systems

  Hello

  I'm looking to use the same program in labelled while sharing the acquisition system of USB-6210 data with the same program. I use labeled 8.5.1 and have a voltage reading program. What I find, however, is that the .vi program does not seem to acquire on the software side, when I disconnect the USB-6210 I use and plug in another, but the same hardware system model. The Green LED on the material will begin to Flash, but there is no entry in the charts of the program. To measure the voltage, I use the function block "DAQ Assistant" to connect to the analog channels in this system. To work around this problem, change the DAQ Assistant function for the device interchanging at work (delete and use the wizard to generate a new DAQ Assistant). It's quite heavy but doable, however, the hope is to apply this program and equipment to several sites, each with their own system of fittings. Is there a way to exchange the hardware systems, but keep the same program so that it might be a way around this? I also used the Application builder to generate a stand-alone program for it but the same problem occurs. Is there any recommendations for multiple devices, or am I missing something? Thank you very much.

  Whenever you connect a new device, it gets its own device ID.

  from Dev1, Dev2 etc..

  So either rename in solution of measurement and of Automattion (MAX) Explorer or use another parameter in the daq assistant.

• Bug in the accessor class data member with name return

  Noticed a small bug in creating data classes accessor member.

  If you have an in the variable title carridge return the vi it creates will not save.

  You do not have to set two things for each control. By default if you show the legend that is the same as the lable. You only need to change and then only for those on the FP.

• How to upgrade the operating system on the new ssd and make the old disk to a data drive system

  Hello

  I have a hp envy m7j010dx with windows 8.1.  It came pre-installed (windows 8) on a 1 TB hard drive.  I recently bought a samsung 840 pro 250 GB ssd that I wouold like to make the drive system and make the original drive my data disc.  confused on how to do it.  hey this is cool not clone. all I can find is stuff of backup or restore.  I just want to put the original on the new disk computer.

  Thanks for any info... soundears

  Start by creating a recovery kit. See the following link for the procedure:

  HP computers - create a recovery Disk Image or save an Image recovery on a USB (Windows 8)

  Learn how to create recovery DVDs or to save a recovery image on a USB flash drive to restore all the original software, in the case of a computer problem major.

  Remove the 1 TB of HARD drive pre-installation and install 250 GB SSD. Use the recovery kit and perform the recovery of the system. See the following link for the procedure:

  HP computers - running a HP System Recovery (Windows 8)

  HP System Recovery allows to reinstall or restore a HP with Windows 8 computer to the way it was at a previous time.

  Then you can connect the 1 TB HARD drive as a data disc and use it.

• Desktop appears again without any data. System restore fails to «incomplete system restore»

  Original title: System Restore failed

  My computer turns off on its own yesterday. After the reboot, my office was back to default settings. Everything that I had stored on the desktop disappeared and I also lost all my favorite places. I tried restoring the system using different dates but it said system restore incomplete. I've lost everything?

  Hi mike,.

  ·         Have you received any messages when the computer starts very well?

  ·         Your data is also missing?

  ·         Do you have any other user accounts on the system?

  Step 1: Try to start in last good known Configuration and see if you can start very well.

  How to start your computer by using last good known Windows XP Configuration

  Step 2: Start the computer in safe mode and check the number. Report of the results.

  See also:

  Abnormal termination can affect the system restore

• back may be a date of System Restore & how do I manually enter

  I would like to do a system restore but only in December dates are listed.  back, I can go with the date and how do I enter that date manually?

  Hello

  Have you checked the box to return more than 5 days to Restore Points in the system restore?

  Read method 1 > Section 4:

  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  If you did and you're still in December, can't do anything.

  Restore Points are already created, or they are not.

  You can only manually create a Restore Point for today, not for yesterday or any other previous time, otherwise than for today.

  See you soon.

• -Pop-up notifications (mobile data and system update)

  Hello.
  I am having some problems with the pop-up notifications. I'm on a prepaid monthly plan and sometimes my mobile data is not 'free' which means that I have fresh when I turn it on. Before I had a pop-up notification whenever I try to enable mobile data, attention that this may have costs. For some people, it's pretty boring, but for me it was perfect because it would be a protection for all the times I have turn on mobile data by mistake. Now this pop up shows no more. I think I should have clicked the "do not show this new 'option." Does anyone know how to get it back?
  The other thing is to know how to get permanently rid of notification of update of the system. I don't want 5.1.1 as the battery life is a little ridiculous that this notification is always coming from time to time. I clear the "software update" application cache and it will, but always comes back after restart.
  Thank you

  Hello

  I think you can get the pop-up notification for mobile data if you go to settings > Apps > the 'All' tab > phone > clear data. Note that you could have two of the phone app then erase the data for each group and then restart the phone.

  About the software update notification, I don't think that you can completely remove it unfortunately. He always appears after reboot.

• Add a date of system restore

  I want to insert a date in order to restore my computer to an earlier date. The system, I cannot give a date, only his own date. WHY?  How to do this simple task?

  You can't do a restore point for the last week, today.

  You can do a Restore Point for today, so that next week, if necessary, you can restore to today.

  Think about it: How can you make a Point of restoration today something happened in the past.

  You should have in the past, if space allowed in SR, to come back to today.

  See you soon.

  Mick Murphy - Microsoft partner

• Error reading data Configuration system after a keyboard spill

  Hi, I have a huge problem.

  First of all, I am dual-booting Windows Vista Home Premium SP2 and Ubuntu 9.10. That is how I am able to post here, because Windows will not work. I have a laptop Gateway which is about a year and a half now, and I need it for school work. Today while I was working, I just turned around and knocked over a bottle of water, which some of its content seeps to the computer keyboard. I have dried up as much excess mess I could and turned off the computer to let it dry. Back to put on gave me an error. The gateway logo came on the screen, as it was loading up, and it got to the point just before it reaches the bootloader and made up a list of Windows process is apparently at the start of the computer each time that. Well under something in the sense of "Mouse initialized" there is an error that says: "System configuration data read error - press F1 to continue, press F2 to Setup."

  The first time, the F1 and F2 keys button would not respond. I assumed it was because of the water, and tried again later. I tried to continue, and the computer has the bootloader without any problem. I'm on Linux to see if it works properly, and he did. I went to mount the C:\ drive and check all of the corrupted files and from the looks of it, there are not. So I restarted the computer, pressing F1 on the error screen again and tried to load Windows. Windows does not start, and I got a message that says essentially that some files has been prevents me to start Windows, and that a Vista disc to the same version I have on my computer allow me to repair the damaged file. I do not have a disk.

  I need to go down any important Windows data and I can do it through Linux, but it is more convenient to do it in Windows. How can I fix this problem without a Windows Vista Home Premium Service Pack 2 disk? A FSC would help? If so, how can I get a? Would let the computer dry a little more help?

  Thanks in advance!

  Give him more time to dry.
  
  If problem persisits, you may need to contact Gateway re replace the laptop keyboard, material etc:

  http://support.gateway.com/support/default.aspx

  And if you need a start-up repair disc in the future:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon. Mick Murphy - Microsoft partner