Data not mounted automatically store

Similar Questions

• Data store is not mounted automatically after updating the Firmware of the LSI

  I've recently updated the card RAID LSI firmware on my ESXi 5.5 system (patched and update top of page)

  When I rebooted, took place the following:

  1. the associated VMFS volume RAID was mounted

  2. the data on the volume store was not mounted

  I mounted the data store manually and restarted my VMs

  Do I have to re-signing the Volume and/or the data store to raise it properly.

  Steve

  The command should be ok and do the same thing as the command esxcli esxcli storage vmfs snapshot mount -l label|-u uuid (for details, see http://kb.vmware.com/kb/1011387).

  André

• Why the store of data/LUN locked automatically

  Some of the virtual machine are not accessible, and some are very slow, after investigating everything that it's a matter of SAN data store is locked so LUN Reset to cancel the lock to a SAN / LUN

  Problem is resolved after rest LUN.

  Now, I want to know why the locked automatically store data/LUN

  You can check if a host is isolated recently network - HA sometimes continually tries poweron VMs elsewhere and locks prevents it - other causes is a year very busy Bay SAN not finding time CPU to release locks... vmkernel hosts should help... Also look for VC events for the isolation of the host

• "Virtual Machine is a store of data not managed by vCloud Director."

  The deployment of new virtual machines in vCD 1.5 we see alerts the system on all the deployed virtual machines that say "Virtual Machine is a store of data not managed by vCloud Director.  Virtual machine has mounted the media or the drive to a store of data not managed by vCloud Director.  Ensure that the Virtual Machine has all the drives and the media mounted on a data store managed by vCloud Director".

  The virtual machines in the catalogue have been imported from vCenter and have a single drive and no media mounted.  Storage is the same that the new virtual machines are deployed.  Virtual machines of power on the good and seem to be ok, but they are all showing this alert system, with 3 catalog from different sources.

  Indeed, it is the question.

  I used SSD on the local disks for VM vswap. I have it configured on Cluster (cluster vswap policy for vSphere) and I got this error message.

  I configured the Cluster vswap strategy to use the same directory as the virtual machine, and I use the new "Host Cache" feature of ESXi5 to use my local SSD drives.

  Fixed it.

  To deliver you, just configure the policy of vswap cluster where you will store the vswap with virtual machine (on the same storage seen by vCD) or add storage nfs for the vCD and it will fix your problem.

• I would like to know when my 1 free trial of adobe Creative Cloud monyh ends to not be automatically loaded with all unnecessary costs. I can't find all the dates when the site followwing steps suggest...

  I would like to know when my 1 free trial of adobe Creative Cloud monyh ends to not be automatically loaded with all unnecessary costs. I can't seem to find a date when followwing steps of the site suggest...

  Hi Sarah,.

  You will not be charged after the end of the trial.

  Once the trial was over, CC app would invite, allowing you to purchase the subscription to continue using creative Cloud applications.

  Kind regards

  Rahul

• The addition of NFS to data - going. zmvolume failed a./mount-nfs-store.pl

  I have 1.5 of the workspace

  I am trying to add NFSv3 part in it. The NFS server is Windows 2008.

  I used the instructions in the document. Whats happening is on the line 'mount-a' at the mount-nfs - store.pl script its change the owner and group of zimbra to 4294967294 and therefore give the

  Error has occurred: directory does not exist or is not writable

  zmvolume failed on line de./mount-nfs-store.pl 67

  As soon as I remove the property and the group back to zimbra.

  Don't know what's happening here ideas?

  I also cant chown to zimbra thereupon 4294967294 unless and until I remove the disc first.

  Thank you

  If anyone need an answer... Make sure you give anonymous enable and give the file for anonymous logon rights

  INFO: How to enable the anonymous logon in NFS and in Windows Server 2003 or in Windows Storage Server 2003 (NAS)

• Space in the store of data not released when a virtual machine is removed

  Hey all,.

  I have a game fairly simple up - two servers ESXi 2 Terminal servers. I'll have a problem, but with space in the store of data not be released on one of them after that I got a clone to the virtual machine, made my changes and removed the original. I can find no record anywhere, using vSphere (not in the inventory or when I browse the data store), but the HARD drive space using the server is still assigned somewhere.

  Any body have tips on where to find or how to fix this if it is indeed a problem?

  Any help is greatly appreciated.

  Thank you.

  How bout refreshing your data store? tab Configuration-> storage-> refresh?

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• ORA-01507: database not mounted

  Hello

  It's 11.2.0.3 on Windows 2008,

  a node 3 RAC ASM.

  After restarting the server that hosts third instance,

  I have the following situation, everything is in place except the database

  on the third node in the database of node 1 and 2 is open, any other service is also running.

  crsctl res stat - you

  ORA.bigdb.db

  1 LINE intermediate bigdb3 dismantled, up in

  itiated

  2 bigdb2 open online

  3 bigdb1 open online

  When I try to query from the third node database, I got the message that the database is not mounted,

  C:\ > sqlplus / as sysdba

  SQL * more: Production of the version 11.2.0.3.0 on Mon Oct 26 15:47:25 2015

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With Real Application Clusters and Automatic Storage Management options

  SQL > select count (*) from the database of v$.

  Select count (*) from the database of v$

  *

  ERROR on line 1:

  ORA-01507: database not mounted

  Seems that there is nothing wrong when querying ASM instance on that node, all disks are mounted.

  C:\ > set ORACLE_SID = + ASM3

  
  

  C:\ > sqlplus / as sysasm

  SQL * more: Production of the version 11.2.0.3.0 on Mon Oct 26 15:49:51 2015

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With Real Application Clusters and Automatic Storage Management options

  SQL > select name, status from v$ asm_diskgroup;

  NAME STATE

  ------------------------------ -----------

  BOW MOUNTED

  MOUNTED CRS

  DG1 MOUNTED

  DG2 MOUNTED

  QG3 MOUNTED

  SQL >

  And it is of the Journal of the third instance alerts.

  ORA-00210: could not open the specified control file

  ORA-00202: control file: "+ ARC/control02.ctl".

  ORA-17503: ksfdopn:2 could not open the file + ARC/control02.ctl

  ORA-15001: diskgroup 'ARC' does not exist or is not mounted

  ORA-15077: could not locate instance ASM serving a required diskgroup

  ORA-00210: could not open the specified control file

  ORA-00202: control file: "+ DG3/bigdb/control01.ctl".

  ORA-17503: ksfdopn:2 could not open the file +DG3/bigdb/control01.ctl

  ORA-15001: diskgroup 'DG3' does not exist or is not mounted

  ORA-15077: could not locate instance ASM serving a required diskgroup

  ORA - 205 marked during: alter exclusive of installation of database...

  Please suggest what can be done to open the database of the third node.

  Thanks to all for trying to help.

  What I did then, it's a sign the db as sysdba on the third node,.

  immediate stop and then start.

  SQL > shutdown immediate;

  ORA-01507: database not mounted

  ORACLE instance stops.

  SQL >

  SQL >

  SQL >

  SQL >

  SQL > startup

  ORACLE instance started.

  System Global area 1.4531E + 10 bytes

  Bytes of size 2269104 fixed

  5905580112 variable size bytes

  Buffers data 8589934592 bytes

  Redo buffers 33673216 bytes

  Mounted database.

  Open database.

  It seems that it is a question of cluster, Oracle obivously (sometimes) will automatically start all resources, as is expected.

  I guess that Windows as operating system contributes significantly to the

• Since Apple ridiculously decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC and click the circle of friends so he could load, MORE I wonder constantly if I want to use my game stored loc

  Since Apple decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC icon and tap the circle of friends so he could load several times, MORE we continue to request if I want to use my game stored locally or my stored GC game. I refuse to install iOS 10, because it means of course I won't be able to manually load the tab my friends and my losing my game completely. How can I fix it? Remove the Center game is the worst thing that Apple could have done, in my humble OPINION.

  You will not lose your game entirely. I have several games of game Center, and they work fine. And I understand the developer of a game that this game center continues to store the backup of your game.

  It's just that now friending is handled via the interface of the game. The only options that you have in iOS10 is to go to the settings panel in / log out of game center or remove all friends. And none of the games I play has updated so I can see how their friending works with iOS10.

  Beyond providing the basic interface, Apple seems to have turned all aspects of the social game on the games themselves.

  If you want to make Apple know how you feel, you can leave your comments via this form

  http://www.Apple.com/feedback/

• WD My Passport drive external drive will not mount once my Macbook Pro is already on

  Hello

  I actually had this problem for a year or two, but I'm finally getting bugged to this topic enough to see if it can be 'fixed '.

  I have a 2 to WD My Passport portable HD connected to my macbook pro via an external (wall outlet) powered TRUST 5 x USB3 Hub.  If everything is connected, when I start the macbook pro there is no problem and the WD My Passport is mounted in the finder.  But if I remove manually the hard drive and then try to mount it again while the macbook pro is running it doesn't mount not.  It used to, but he won't now.

  In the past the WD My passport would need to unplug and perhaps the USB3 hub would need power cable disconnect from him and the USB hubs out the macbook pro.  So when I joined this new and plugged the hard drive WD in the hub, it would rise very well.  But now it's just point blank refuses to ride until I restart the macbook pro.  Once I restart it it climbs perfectly and stays up forever--until it is dismantled manually - and then I have to restart the macbook pro again so he could mount once more.

  I tried all combinations of pull cables and adapters to power but nothing has worked.  After dismantling the WD hd and plug back on the USB3 light led on the hub hub lights up and the hard drive turns manually, but, as I say, it is not mount and it is not visible in disk utility.

  Any ideas please?  It's a bit annoying to have to keep restarting the mac whenever I had to unplug the hard drive WD.

  "As issued" WD Passport appear to cause a number of reports of trouble around here. You have already taken the first "not best" - using a powered hub. Just make sure that the hub is really power (lights on, for example). It could be that the external drive is in its death throws.

  This happen if the WD is the only thing on the powered hub?

  The Mac USB ports work with other devices?

  Here's what my experience with these things has believing me. WD made great bare discs, but I can't be so kind to their pens. Three questions:

  (1) I think that they should use chipsets which are not very easy to Mac.

  (2) most driving the ship formatted for Windows

  (3) even those shipped as "Mac editions have some odd which makes it difficult to access file formatting.

  If you do not have to share the drive with a Windows computer, you can reformat the drive and that often fixes "fail to mount/recognize" question. Disk utility is your tool of choice here because it is already installed on your Mac. Completely erase the WD drive by selecting the tab 'Clear' in the bar tabs to disk utility. Define the plan of Partition to GUID Partition map and journaled for Mac extended format. Press the button 'clear '. The reader will now will be rid of eccentric WD partitioning and formatting schemes and be a good Mac hard drive.

  If you share the road with a Windows computer, consider getting a better workout. After having fought external drives 'brand' on my computers and others that I maintain, I now use only boxes of other computer world with naked WD drives inside. Since this change, I have zero problems. For my MacBook Pro, I use this forum:

  https://eShop.MacSales.com/item/OWC/MEPMU3ES/

  I ordered the external power optionally for use at home and go on the road bus-powered. It's an empty envelope - just a hard drive of nu. They are more expensive than the stuff that Staples puts on sale every weekend, but are much more reliable. I ask the question. "What is my value data?"

• 12 iTunes does not start automatically when I connect iPhone 6s

  I have a desktop Windows 10 new and I connect my 6s iPhone more synchronization with Outlook, every day.  When I connect my iPhone, iTunes not open automatically as it has always done in later versions.  If I manually open iTunes, then the iPhone syncs fine, but I would like to do this annoying extra step every day.

  I have read several posts on this topic and here is what I tried:

  -J' I uninstalled/reinstalled iTunes

  -J' checked I have the vs 12.4.3.1 of Windows and iTunes updates

  -I went to Device Manager > Apple Mobile Device Driver > pointed to: \Program Apple Mobile Device Support\Drivers updated and referred 'the driver is up-to-date.

  -In iTunes > edit > Preferences > devices > prevent iPhone sync automatically is not checked

  -In iTunes > my iPhone > summary, is checked automatically sync when this iPhone is connected.  I also tried unchecking it, apply, close/reopen iTunes and then check again with the same result.

  -J' have tried using a different USB port

  In addition to this, when I connect my iPhone to a different USB port, Windows gives a saying "Select to choose what happens with this device.  When I click on it, Windows provides about 5 options on how to import the device or to open an application when the device is connected, but iTunes is not in the list of apps to select from.  In addition, in older versions of Windows, there is a link to select a different program from your pc to use if it wasn't in the shortlist and this link/option is no longer there it that it seems impossible to select iTunes opens automatically when the iPhone is connected.

  FYI, I had exactly the same problem on my old pc once it has been upgraded to Windows 10.

  Does anyone know how get iTunes opens automatically when I connect my iPhone?

  I suspect that you need to tell Windows not to do anything, make sure that the iTunes Helper application is configured to run on start-up (activation/deactivation of the next triggering and to solve this problem) and in iTunes, select the device and choose the option to run iTunes when the device is connected.

  TT2

• Drive external DRIVE will not mount after resizing in Windows

  Hi all

  I got a 1 TB external drive that I used for a while about 10 Windows and OSX (El Capitan). I had two partitions Configuration for use on every platform without any problems.

  Then, I needed extra space on the Windows partition, so I think that, if I remember correctly, that I've resized using the disk management tool in Windows. I reduced the OSX volume and increased the size of the Windows volume. I can probably hear you all shout now.

  Surprise, my volume OSX will now not mount when I run in El Capitan. It does not show in disk utility, and the only way to 'see' it is using diskutil:

  Output: Diskutil list

  / dev/disk2 (external, physical):

  #:                       TYPE      NAME                                                            SIZE        IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk2

  1:                       EFI EFI                                                                         209.7 MB  disk2s1

  2: 000100AF-4028-0006-2192-BA7200000000 650,3 GB disk2s2

  3: 000100AF-7220-70FB-2192-BA7200000000 23.7 GB disk2s3

  4: Apple_HFS Install OS X Yosemite 5.7 GB disk2s4

  Output: Diskutil list cs

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group DD8EBA77-8349-4762-BD32-4D45402DDE23

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 120473067520 B (120.5 GB)

  Free space: 12656640 B (12.7 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120473067520 B (120.5 GB)

  |

  + -> 70EB98AB-5D10-4774-89C9-F66D334A7BA0 family of Logical Volume

  ----------------------------------------------------------

  Type of encryption: AES - XTS

  Encryption status: unlocked

  The conversion status: complete

  High level queries: secure

  |                        Password required

  |                        Accepts new users

  |                        A visible users

  |                        At the Volume key

  |

  +-> Logical Volume BEE2BAE7-909A-42F8-91F1-55085485904A

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 120108089344 B (120.1 GB)

  Reversible: Yes (unlock and decryption required)

  Put the situation: Restart required

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Output: TPG - vv - r sudo show/dev/disk2

  See the TPG: / dev/disk2: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk2: MBR suspicious to sector 0

  See the TPG: / dev/disk2: Pri GPT to sector 1

  See the TPG: / dev/disk2: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1270198464 2 part TPG - 000100AF-4028-0006-2192-BA7200000000

  1270608104 624918840

  1895526944 46298496 3 part TPG - 000100AF-7220-70FB-2192-BA7200000000

  1941825440 262144

  1942087584 11175400 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  262151 1953262984

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Output from: sudo fdisk/dev/disk2

  Disk: geometry / dev/disk2: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-1270198464] HFS +.

  3: 1023 254 63 AF-1023 254 63 [1895526944-46298496] HFS +.

  04:00 0 0 0-0 0 0 [0-0] unused

  #2 partition is my concern. It contains my library, iPhoto and other important pieces.

  So, is anyway that I can get it back? What can I do to try to preserve its data? Thank you very much! Chris

  It comes out by any other command that could help someone point me in the right direction to solve this? Thank you

• external hard drive not mounting

  Here it is the end of the year and one of my external hard drives (1 TB Iomega MacMini) decided to not mount on the desktop of my MBP 15 "

  (in early 2011).

  I read a few posts on ways to remedy by making the Kext Utility application, reset the SMC, disk repair/first aid utility, using different cables/ports.

  test another external hard drive (which is mounted using FireWire 800) etc...

  When I look at the MBP in the system report found in 'about this Mac' sees the external hard drive, that I'm putting and yet this car is not editing.

  The Iomega hard drive light flashes and there is power and the whirring of the drive, so that it seems the unit working on it of own but is no longer connection

  on my desk.

  I have Time Machine on two external hard drives, but has a reader is slightly larger than the other, the information stored on both devices is slightly different.

  So, if I can get access to the data from the Iomega hard drive and save it, then I'll be a happy camper and will update to another external drive.

  For now, I hope some of you can provide advice to solve this problem.

  I booked time at the Genius Bar, but nothing is open until next week.

  Looking forward to responses and wish all a happy new year.

  If so, try it on another Mac.  Don't rule out the possibility that the HARD disk is dead.

  Ciao.

• Pavilion dv3500 - FZ941PA #ABG: time Internet will not sync automatically

  Hello! Good day again!

  My time Internet is not synchronized automatically, so in everyday life I always synchronize it manually, I follow some sites about procedures, they synchronize but not automatically and also in the registry, I try to change it from automatic manual but nothing happens. I also use CMD, but it syncs automatically, Can you help me please, I'm out of options, the only thing that I think is the CMOS battery is weak, where can I find the CMOS battery in my laptop and where can I buy one? But first of all to give me an options on how can I fix my problem. Thank you!

  Hello

  Have you clicked on apply? Please refer to the discussion of foloowing:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-wont-synchronize-with-timewindowscom/d81a02ad-2334-488D-8829-d7ae03c1f55a?auth=1

  For the CMOS battery, it is also called RTC battery and part # 48824-001 is as shown:

  http://PartSurfer.HP.com/search.aspx?SearchText=FZ941PA

  You can buy from the store above or from:

  http://www.Amazon.com/HP-battery-coin-cell-468824-001/DP/B0052UM8P8

  Kind regards.

• Default volume is hidden and not mounted on reboot

  Topic says... I have a disc having two primary partitions, linux, the other ntfs.  Is not the system partition (machine has two discs, this disc is just for data).  I have manually set the ntfs partition to clear the hidden attribute as he received a letter from reader and mounted.  After the reboot, it is all back to when I started... hidden flag is set and the drive is not mounted.  How know why this change?  Thank you.

  Hello Digi,

  Welcome to the Microsoft Community Forum.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forum. It is better you post the same query in the Microsoft TechNet community. You can get more effective suggestions and adapted by experts familiar with this topic.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet community

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you