Toshiba 22L1334G problems with HDMI

Similar Questions

• Toshiba 46WL768 - problem with the HDMI connection

  Hello, my problem is the following:
  I have a Toshiba Regza TV 46WL768.
  I bought a Qviart Unic satellite receiver and when I connect to HDMI does not recognize.

  I tried another TV with HDMI decoder and works perfectly.

  I tried different HDMI toshiba configurations and does not.

  Connect another device via HDMI to the TV toshiba and if it works.
  I hope you can help me. Thanks in advance.

  If I understand you just all your TV's HDMI ports are working properly, no?
  In this case, you must contact Qviart Unic support and ask what may be the problem.

• Serious cutting problem with HDMI HD output a7s

  I am a filmmaker from THE base and possess an a7s & package Odyssey 7 q + recorder camera.

  I just noticed a serious technical problem that must be addressed. When shooting video with the A7s, the component of luminance of the HD which are sent via HDMI signals are cut to 100IRE, no matter what profile picture gamma setting is chosen. I can see it in the waveform, the chrominance information is not cut exceed 100IRE. For example, when I turn the curve of gamma slog2, exposed blue sky just before clipping has kept above blue channel 100IRE, but more balanced information clip of signals (such as a piece of white paper).

  This problem does not appear in the output HDMI 4 K or record XAVC-S internal. It is true both of these formats. It is specific to flow out of the HDMI port uncompressed HD video. I'm sure that it is a firmware issue.

  This conclusion came after I noticed it during a shoot and have led to extensive testing. I would prefer a real difficulty as opposed to workaround, because it cut a stop of information from the latitude to highlight whenever I have to shoot 60 p or don't want to shoot 4 K.

  Apparently, it's a problem with the recorder of Odyssey is not correctly interpret the sony exposure output scaling. Convergent Design is working on a fix to include with their next update of the firmware. I see this problem on Shogun I tested.

• Problems with HDMI Port 3/4 on Toshiba 46xv733

  HY everybody,

  When I try to connect a device (PC, Xbox, or PS4) HDMI1 or HDMI2 (where everything is fine) for HDMI3 or HDMI4 I can't make them work properly. Resolution passes something a cable not only 30 Hz. When I try to change the resolution (on PC) the photo does not match the screen (for large or too small).

  I searched throu the documentation and the Web but can't find info HDMI3/HDMI4 are different from HDMI1/HDMI2.

  The TV is Toshiba 46xv733.

  Any suggestion on how to solve this problem would be highly appreciated.

  Thanks in advance

  Hello

  In [User Guide | http://www.toshiba-om.net/LCD/PDF/English/XV733-32374046-English.pdf] you can find some information that certain HDMI devices at the beginning may not work properly with your latest HDMI TV due to the adaptation of a new standard.

  In this case you must unplug your HDMI cable first, and then try the two options settings. INSTAPORT content type and turn off.
  You start HDMI source should work with your TV.

  The HDMI 3 seems to be a little different from the HDMI 1 and 2.
  3 HDMI supports digital and analog sound.
  HDMI 1 / 2 / 4 supports digital audio ONLY.

  The HDMI 3 must be used in order to receive sound from a PC connected (via HDMI to DVI cable).

• Satellite P300-150 - problems with HDMI output

  I recently reformatted my hard drive due to a nasty virus. I now put my old favourate XP Pro with service pack 3. Never had very well with Vista.
  I managed to find almost all the drivers, I think I need, but the HDMI does not work and I can't seem to find the HDMI for XP/Vista Manager only. XP is too old to support HDMI?

  Is their a fix or a piece of software that will lead the material in an XP environment?

  Hi markjj,

  Normally you n t need a special driver for the HDMI connection. It is only important to install the driver from Toshiba Web site viewing. After that, you can use the HDMI connection and switch between monitors when you press FN + F5. It s the same procedure as in Vista or other operating systems.

  So have you ever tried on XP HDMI connection?

  Test and give us some information. If it doesn't we can try to solve this problem. :)

• Toshiba RL938 - problems with Player multimedia network

  Hello, I just purchased a WD My Cloud and encountered the following problem: my TV Toshiba RL938 SMART recognizes the device, but network media player can not play videos, it begins decoding and says 'media player error. If I connect via USB, the usb media player plays all types of videos without any problem.
  Please tell us how to solve this problem. Thanks in advance.

  Posted by dmonika
  

  Hello, I just purchased a WD My Cloud and encountered the following problem: my TV Toshiba RL938 SMART recognizes the device, but network media player can not play videos, it begins decoding and says 'media player error. If I connect via USB, the usb media player plays all types of videos without any problem.
  Please tell us how to solve this problem. Thanks in advance.

  The user manual contains a list of the file types supported by the reading of network based on the DLNA specification. Please make sure, that the file types that you want to playback are mentioned in this list, otherwise it won't work.
  Also, please note that USB playback generally supports a variety of file types, for technical reasons. This has nothing to do with the brand or model, but is caused by technical limitations of the DLNA standard.

• Data storage 3.5 "Toshiba Canvio problem with permanent fade.

  Since I started using the Toshiba Canvio 3 TB 3.5 "external data storige disc he found himself a strange faul which makes it difficult to use.

  Data storage, for example when I use it to watch a video file off and then it start immediately again to go back... It can happen to the breast of a movie 20 times and it is very annoying because you never know when the judgment will happen...

  How to fix this please?

  Hello

  In my opinion it is not very easy to say why the external HARD disk automatically turns off while watching a movie. But this issue does not seem that there might be something wrong with the settings or software.
  Of course, some tools are available and installed on the HARD drive as the NTI Backup Now EZ software but I n t think that this could affect the playback of the movie. However, this software supports and automatic backup function and you can change how often your backup intervenes (hourly, daily, weekly, etc.). So try to disable this setting for testing purposes.

  Fact is that this 3.5 HARD drive must be connected to a power adapter and HARD drive supports the USB 3.0 interface but it s backward compatible with USB 2.0.

  I put t know what are the USB ports you have used for the connection of HARD drive, but I recommend you test all the USB ports taken in charge by the PC.

  Last but not least, it could be possible that there is a hardware problem simple HARD drive

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• Problems with HDMI output

  I have a HP G61 Notebook PC with windows 7 Home premium

  When I plug the HDMI cable into the laptop and connect it to display the output of the speakers or headphone stops. The bars of output on the mixer vloume display output from the HDMI device, but nothing independent headsets and headphones or speakers.

  What is the case can someone help?

  OK problem solved. I typed sound in the search on windows 7. Then went to the HDMI audio output and off the exit. I hope this helps someone the with this problem

• Satellite P300D-14F - strange problem with an HDMI cable

  I have some problems with the HDMI on my P300D-14th:
  until yesterday everything worked perfectly, but now I can't watch video on my TV (Toshiba REGZA).
  TV's with black screen (when the laptop is off - screen is blue).
  Problem is not in the cable (I have 2, second I ve bought today).

  And HDMI works (but also not good) when I open the BIOS on my laptop:
  http://S007.Radikal.ru/i302/1201/F8/8a363ffeeb16.jpg http://s15.radikal.ru/i189/1201/26/a42111548da0.jpg
  (TV foto, on all the laptop works perfectly)

  on TV, I have 2 HDMI, but neither first second step do not work...

  My OS is Windows 7, but I also have tryied on Ubuntu Live CD.

  I think the problem is HDMI on laptop, but I don't understand why it works in the BIOS...

  Hello

  This means that you can see the page of the BIOS on the TV?
  Have you tested the FN + F5 key combination once Windows has started?

• 13 d-0016nl envy: problems with the HDMI audio

  Dear Sirs,

  Due to some problems with an engineering program I had to reinstall Windows 10 on my laptop. The version of Windows is the same of the one installed on the laptop when I bought it. Before the laptop with HDMI audio installation worked fine, but then, while the HDMI video continues to work well, the audio turns off directly from the laptop, such that the cable was not connected.

  I tried to activate the 'reproduction devices' HDMI connection, but I'm not able to do this because it's as if the cable is not connected, and the HDMI connection icon appears as gray.

  I tried to update the audio driver, but it didn't work, so I tried to download and install the latest version of these drivers from the hp site but neither this worked.

  Can you help me? The laptop is quite new and I would like to solve this problem without using 2 different cables to connect also a speaker with a cable to the because the HDMI does not work as it should.

  Thanks in advance,

  Martina.

  You are the very welcome, Martina.

  It would be the graphics driver you need install the HDMI audio driver...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

• Problem with the Toshiba recovery process

  Hi guys,.

  I had some problems with my laptop and decided to return to the factory settings. But during the process, because of a few mistakes that I didn't understand, formatting process was broken and I guess that the recovery in my hard drive section was damaged. So, I could not use boot from the hard drive. Becacuse Toshiba did not give me recovery disk when I bought it, I had to boot the pc with cracked windows. I never use illegal software, but I had to do this temporarily. In any case now Toshiba has sold me an extra price, thank you Toshiba!

  Today, I had the cargo, and Toshiba Turkey sent two recovery disks. In the first disc, there are preinst.swm files under the ZZIMAGES folder. And in the second disc, there are some files named as bin, efi, planfolder, boot, sources etc.

  What should I know? Hot to go back to my original windows? And how can I do a recovery of these two DVD recovery usb drive?

  Thank you, best regards better.

  Any help pls?

• Problem with new PC Toshiba laptop

  I don't have good experience with Toshiba as a great brand.

  I brought a new laptop of dicksmith elizabeth her (SR4192426). At the time of the sale, the saleman said if you have a problem with the machine to come back and we can repair or replace. This is the Australian rule if you have a problem with in month thn, it should be replaced rather than fixing. I have problem starting with the product within one month, I approach of dicksmith three times, but they gave me a lollipop. I am very disappointed by the service of dicksmith. I am very disappointed by the service of Toshiba. I sent to iseekcomputing and call back from their $65 would be paid by the customer to solve this problem, if the same problem is coming soon in the future that agaim pay $65 to fix.

  I have the Toshiba team ring that they reset as factory defauld but the problem. In the end, I want to replace my laptop because I am not happy with that. I've used nothing, much work is underway and my laptop is still iseekcomputing since Monday.
  Kulwant singh

  In the end, I want to replace my laptop because I am not happy with that.

  AFAIK that the manufacturer of the device does not replace the unit, but in case of hardware problems, the warranty will cover the repair costs.
  If you want to replace the unit purchased, you will need to talk to your dealer who...

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• Toshiba Tecra A3 - problem with Port Replikator III

  Hello

  I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

  any help is much appreciated
  Thank you
  Mario

  Hello

  As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

  Good bye