Data storage system?

Similar Questions

• error 2558 with open data storage express vi.

  I have the appropriate Tektronix installed plugin and when I use the Open Data Storage Express to create new vi *. WFM file I get error-2558 indicating that my system does not have the software installed to support the file type. I use the 2015 SP1 version. Anyone else see this problem? What am I mising here?

  I can't find an easy way or direct to do. There may be a way to convert a file that is saved in a different format if you can find (or create) a file converter. What is your ultimate goal for writing a. WFM file? This will be used by a device that only recognizes. WFM files?

• Exception of Microsoft Exchange 2007 owa data storage

  Hello

  We have the MS Exchange 2007 server. I have a problem with the owa service and especially with a user account. From outlook, I can see and navigate through all folders. OWA when trying to navigate through some files I get the following exception: Exception type: Microsoft.Exchange.Data.Storage.CorruptedDataException Exception message: the configuration object data is corrupted. Field = UserConfigurationType.

  Call stack: Microsoft.Exchange.Data.Storage.UserConfiguration.BuildConfigurationFromQueryItem (file, file, Object [] line) Microsoft.Exchange.Data.Storage.UserConfiguration.GetIgnoringCache(UserConfigurationManager manager, Folder folder, String configurationName, UserConfigurationTypes freefetchType) Microsoft.Exchange.Clients.Owa.Core.UserConfigurationUtilities.GetFolderConfiguration (String configurationName, userContext, StoreId folderId UserContext) Microsoft.Exchange.Clients.Owa.Basic.ListViewPage.OnLoad(EventArgs e) Microsoft.Exchange.Clients.Owa.Basic.MessageView.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint))

  Any help will be appreciated. Thanks in advance. Enrique

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Sierra of MacOS - 50-100GB of storage system?

  Hi all

  I have a Macbook Air from mid-2013 with 120 GB of SSD storage. I have updated my OS sierra and noticed that the 'system' takes up 100 GB of storage! I tried to delete my files, but for some reason, I still has a very high amount of the storage system.

  I decided to clean my computer everything and do a clean install. With the clean install, I have 50 GB of storage of the system. This sounds like a ton of storage used for system to me. Is this typical? I remember that a lot of space in the Yosemite/El Capitan.

  Thanks a lot for your help!

  120 GB SSD storage does not work. What you need, it is 10 times this amount of storage and memory far more to have a working machine. Got a HD big or better get a new machine and couple HDDs connected outside your small computer.

• How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

  How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

  Hello

  Apple has not yet announced the capacity of storage or the music of Apple Watch series 2 storage limit.

• I want to buy a flash with lightning connector data storage.

  I want to buy a flash with lightning connector data storage.

  I'm between Transcend JetDrive™ Go 500 and iXpand SanDisk Flash Drive.

  What do you suggest me? Do you have another?

  My first priority is speed and iOS app use of data transfer.

  Hello

  To get the advice of a large sample of existing users of each product, you could more usefully read ratings on Amazon.com and reviews of products.

  If your questions are not answered there, you can also post a question of your choice.

• How can I keep 'Other' small data storage?

  I have a 6-16GB iPhone running on iOS 9.3.2.  A few months ago I started to run out of storage space, and I found it was used mainly by 'other' data upward.  I tried many, MANY tips given here and on other sites, in order to reduce others' my data, to the point of finally breaking and restore my iPhone to factory settings, then individually re-download my mail, applications, photos, etc. Mac support.  Initially, this great worked, now here we are a few months later, and my 'other' is back up to 7GB. I am so frustrated, that I do not understand why my 'other' data are so large. I thought by loading everything individually instead of simply to restore a backup, I would have managed to get rid of the corrupt files, etc. It is not possible to have to restore my phone settings whenever this happens, I need a more permanent solution to keep this 'other' data in check.  Any suggestions?

  You are right. Restaurant as new every time is not the way to handle this. I suspect that one of your applications creates the issue but identifying that one would be difficult, likely error. 7 GB of others is much too large, I tend to run about 1 or 2 GB maximum. These articles can help, but like I said, I think the problem is with a single application.

  http://osxdaily.com/2013/07/24/remove-other-data-storage-iPhone-iPad/

  http://www.IMore.com/how-find-and-remove-other-files-iPhone-and-iPad

• Data storage 3.5 "Toshiba Canvio problem with permanent fade.

  Since I started using the Toshiba Canvio 3 TB 3.5 "external data storige disc he found himself a strange faul which makes it difficult to use.

  Data storage, for example when I use it to watch a video file off and then it start immediately again to go back... It can happen to the breast of a movie 20 times and it is very annoying because you never know when the judgment will happen...

  How to fix this please?

  Hello

  In my opinion it is not very easy to say why the external HARD disk automatically turns off while watching a movie. But this issue does not seem that there might be something wrong with the settings or software.
  Of course, some tools are available and installed on the HARD drive as the NTI Backup Now EZ software but I n t think that this could affect the playback of the movie. However, this software supports and automatic backup function and you can change how often your backup intervenes (hourly, daily, weekly, etc.). So try to disable this setting for testing purposes.

  Fact is that this 3.5 HARD drive must be connected to a power adapter and HARD drive supports the USB 3.0 interface but it s backward compatible with USB 2.0.

  I put t know what are the USB ports you have used for the connection of HARD drive, but I recommend you test all the USB ports taken in charge by the PC.

  Last but not least, it could be possible that there is a hardware problem simple HARD drive

• Storage system problems

  I just opened the tab "about this Mac" and headed over to storage to see what the levels were. And to my surprise, I found a section called 'backups '. I am posting this because I've never seen this before on my Mac after having owned it for almost 4 years now. Please see attached. I would like to know where it is stored and why it now makes its appearance in my storage system. Thank you.

  It depends on if your time Machine is configured to backup local ups

  This thread has some tips that would be useful

  http://www.Mac-forums.com/OS-x-operating-system/285310-MacBook-hard-drive-filled - backups.html

  (1208)

• data storage

  Hello

  I have a few questions about how to manage and store data.

  I am witing a calibration software where I need to display the chart with the probes.

  then table of current vs probe 10 times Ref then calculations such as average, sigma, then conversion and data storage.

  Using data from the previous program files, I have identified a type of format.

  I reproduced it as a cluster with cluster as table follows this im using as a temporary variable when acquiring and pending approval of the user.

  After that I'll have to move from cluster to a vi convert txt to be operated by another application.

  My question is:

  is it a good way cluster using rather vs. string table

  one is typed so much more easy don't make mistake affecting each measure and the data calculated in the right place

  but less if the cluster size has to change

  with an array of strings, change can be easier but it is easy to make the mistake of index and by placing it in the wrong cell

  What would you use?

  Best regards

  Tinnitus

  Attached cluster VI

  While I agree with Mark that by using the software OpenG is write a much easier configuration file (in fact you can use the variant to the ini cluster just write the table once), it seems you are actually asking how to store data, no?  In this case, the format of configuration file would seem inappropriate if you plot the data that you need another script to extract data from this format.  If you try to write data that the customer can extract, then the way you suggest (without having seen) is not unreasonable.  Have that said, you considered PDM.  There are plugins for playback of this format for several packages of data analysis (Igor, Matlab, Excel, etc.) and writing to the file in this format is child's play.  There were converters even in ascii as others have developed on this site (I have not really tested it).  Anyway, just a thought.

  Cheers, Matt

• choice of the model of design for data acquisition system

  Hi all

  I have a problem on the selection of the model design / architecture for a data acquisition system.

  Here are the details of the desired system:

  There are data acquisition hardware and I need to use by looking at the settings on the user interface.

  the period of data acquisition, channel list to analyze must be selected on the user interface. In addition, there are many interactions with the user interface. for example if the user selects a channel to add scanlist, I need to activate and make it visible to others on the user interface.

  When the user completes the channel selection, then he will press the button to start the data acquisition. Then, I also need to show the values scanned on a graph in real time and save them in a txt file.

  I know that I can not use producer consumer model here. because the data acquisition loop should wait for the settings to scan channels. and it works on a given period by the user. If the loop of user interface makes higher then loop (loop data acquisition) of consumption. This means that queue will be bigger, larger. If I use notifier this will be some data loss comes from the user interface.

  y at - it an idea about it? is there any model of design suitable for this case?

  Thanks in advance

  Best regards

  Veli BAYAR

  Software for embedded systems and hardware engineer

  Veli,

  I recommend the model producer/consumer with some modifications.

  You might need three loops.  I can't tell for sure from your brief description.

  The loop of the User Interface responds to the user for configuration entries and start/stop of acquisition.  The parameters and commands are passed to the Data Acquisition loop via a queue. In this loop is a machine States that slowed, Configuration, Acquisition and stop States (and perhaps others). The data is sent to the processing loop through another line. The processing loop performs any data processing, displays the data from the user, and records to file. A registrant can be used to send the Stop command or stop the loop of the UI for other loops.  If the amount of treatment is minimal and the time of writing files are not too long, the functions of processing loop might be able to happen in the case of the UI loop timeout structure of the event.  This makes things a little easier, but is not as flexible when changes need to be made.

  I'm not sure that there is a type of design for this exact configuration, but it is essentially a combination of the models Design of producer/consumer (data) and producer/consumer (events).

  Lynn

• I can't date MY SYSTEM, I GET a CODE of ERROR 'WindowsUpdate_8024D00A '.

  I can't date MY SYSTEM, I GET a CODE of ERROR 'WindowsUpdate_8024D00A '.

  What is the build number of your version of Vista
  «If you are looking for the number of exact version of Windows Vista, you can find it by running 'winver'.»

  Something before 6000 is the pre-release version of the software

  TaurArian [MVP] 2005-2010 - Update Services

• path of the file to open data storage

  Hi all!

  Now I am using open data storage blocks, write data and data storage to store and retrieve data from result nearby. For the issue of file path, before I

  Set the path of data by double clicking on the block 'open data storage' and inserting the location of the file in the indicated place, and it worked!

  Now since I made a stand-alone application of this program and use it on other computers, the location of the file that I inserted in the block of open data storage is not

  no more valid in the other PC. So I modified my source code by connecting a 'journey of the current vi' to the node of the file path of the open instead of data storage block

  insert inside the block and this does not work! During the race he displays an error in the data writing block saying that the refnum of storage is not valid!

  I wonder why I couldn't specify the path of the file like this. Kind to allow me to specify the path of the file in the path of the vi?

  Thank you!

  Chao

  You need to account for that path changes when integre integrated application, take a look at this example.

  https://decibel.NI.com/content/docs/doc-4212

• Data member $System.logoff

  I need to use this data member to order the closure of current user session after a set time.

  In aid of lookout 6.5 this member is set to write, but in the object browser, there is no way to access it to logoff set condition.

  Is an error in the help file or there is a way to get there?

  Greetings

  Mario Fanelli

  EL. P.R.IND Srl.

  [email protected]

  The problem is the $System Group. We decided to add to the $system, but all members of data in $System is only writable and may not have the connection "Edit." What you can do is to make a right click on it and drag the Panel to create a button or switch. Or you can create a button and add the $System.logoff to its remote source.

  The original purpose of the datamember is for the user touchscreen who feel perhaps difficult to click on the small menu. If you want to programmatically control the logoff data member, you can create a push button and connect the remote source of logoff and then plug a timer to the button by the link "Edit".