database configuration waiting more than 2
HelloIAM trying to configure 2 databases before my main database name is anupp1 and name of the standby database is respectively anups1 and anups2 (physical databases standby) when I configured means archiving is received in the two databases, but when I move to this time of check is received to the single database
My primary database is anupp1 and databases on hold are anups1, anups2
now, when I switch to digital at the time IE primary is anups1 and Eve are anupp1 and anups2
so log archiving are nnoy shipped on anups2 they are on anupp1 iam showing the content of all the pfiles
anupp1 pFile
db_unique_name = "anupp1".
Log_archive_dest_1 =' LOCATION = / u01/app/oracle/oradata/anupp1/arch /.
VALID_FOR = (ALL_LOGFILES, ALL_ROLES)
db_unique_name = anupp1'
LOG_ARCHIVE_DEST_2 = "SERVICE = anups1 LGWR ASYNC
VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE)
db_unique_name = anups1'
log_archive_dest_3 = "SERVICE = anups2 LGWR ASYNC
VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE)
db_unique_name = anups2'
log_archive_dest_state_1 = enable
LOG_ARCHIVE_DEST_STATE_2 = enable
log_archive_dest_state_3 = enable
fal_server = anups1
fal_client = anupp1
anups1 pFile
db_unique_name = "anups1".
Log_archive_dest_1 =' LOCATION = / u01/app/oracle/oradata/anups1/arch /.
VALID_FOR = (ALL_LOGFILES, ALL_ROLES)
db_unique_name = anups1'
LOG_ARCHIVE_DEST_2 = "SERVICE = anupp1 LGWR ASYNC
VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE)
db_unique_name = anupp1'
log_archive_dest_state_1 = enable
LOG_ARCHIVE_DEST_STATE_2 = enable
fal_server = anupp1
fal_client = anups1
log_file_name_convert ='/ u01/app/oracle/oradata/anupp1 / ',' / u01/app/oracle/oradata/anups1 /'
db_file_name_convert ='/ u01/app/oracle/oradata/anupp1 / ',' / u01/app/oracle/oradata/anups1 /'
anups2 pFile
db_unique_name = "anups2".
Log_archive_dest_1 =' LOCATION = / u01/app/oracle/oradata/anups2/arch /.
VALID_FOR = (ALL_LOGFILES, ALL_ROLES)
db_unique_name = anups2'
LOG_ARCHIVE_DEST_2 = "SERVICE = anupp1 LGWR ASYNC
VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE)
db_unique_name = anupp1'
log_archive_dest_state_1 = enable
LOG_ARCHIVE_DEST_STATE_2 = enable
log_file_name_convert ='/ u01/app/oracle/oradata/anupp1 / ',' / u01/app/oracle/oradata/anups2 /'
db_file_name_convert ='/ u01/app/oracle/oradata/anupp1 / ',' / u01/app/oracle/oradata/anups2 /'
so are over content... pls let me know what setting is not set correctly or the changes I need to make
Thanks in advance
Concerning
Kavita
Hello
In this configuration, I guess that you are trying to implement a cascade configuration, because anups1 & anups2 set as log_archive_dest_x on anupp1.
If you add log_archive_dest_3 to anups1 and anups2 they will ship archivelog to these two destinations in a failover. I mean:
for anups1:
log_archive_dest_3 = "SERVICE = db_unique_name LGWR ASYNC = (ONLINE_LOGFILES, PRIMARY_ROLE) anups2 = anups2 VALID_FOR'"
for anups2:
log_archive_dest_3 = "SERVICE = db_unique_name LGWR ASYNC = (ONLINE_LOGFILES, PRIMARY_ROLE) anups1 = anups1 VALID_FOR'"
Underlined mseberg parameters are important.
Tags: Database
Similar Questions
-
Is it possible to speak with a technician if I am using Dial-up Internet? It seems that I waited more than an hour while trying all the time to connect.
original title: Online Tech SupportHi Cindy,.
No, unless you have a second phone line, using a cell phone, or try something like Skype on your computer.
Try to connect to what? Technical support for what? Of course, you could connect here, so it works. What is the problem that you are looking to get help?
I hope this helps. If we can help, let us know.
Good luck!
-
Can automatic unlocking be configured on more than one Mac?
I can set up this feature on my iMac, but not my MacBook Pro? Can only be used with one machine at a time?
Hello
Apple Watch can be used to unlock several Macs using Auto unlock, subject to each Mac meeting the requirements of the system and is configured accordingly.
-
Hi the adobe team,
I paid every month for the muse of adobe, I just wait 24 hours for approval and noting
What should I do
Have you tried to contact customer support? Contact us | Adobe
Also, let us know if Muse now works for you.
-
Terrible service. Unresolved issue since more than a week, no replies/views
I waited more than a week and I have yet to receive a response, and still less unique views of people other than me. I currently have 35 views on my question, which are all mine, except for 1-2 of them, I'm constantly searching for an answer to this problem persists and begins to bother me. I provided updates on the way I hope to simplify the process, but clearly, it doesn't matter. I tried several suggested articles and they all didn't work. I also tried Googling the answer, but nothing appears. It would be great having really can someone help me, thank you... I think so.
Original post--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/kernaldatainpageerror-please-help/3d014daf-841e-4e3d-bba7-b0e49d591f61?tm=1440644481994&auth=1
'Service' implies an exchange of money against someone another time or skills. This isn't how these forums work. You pay no money to get a response and volunteers trying to answer your questions did not get paid for their time.
If there are any volunteers who happens to know what is the problem with your machine, so you get no answer. It's as simple as that. You then five options:
- Solve the problem yourself.
- Live with the problem.
- Have the device repaired.
- File an appeal of paid Microsoft service.
- Do a destructive factory restore.
-
New APEX listening port and more than 32K
Hi all
Is the problem with the recording of high values (greater than 32 k) solved with the new listener APEX 4.0?
Thank you
Fadi.Samara says:
Is the problem with the recording of high values (greater than 32 k) solved with the new listener APEX 4.0?The Apex team must answer as to what is expected for Apex 4.0, but the 32 k issue is twofold:
(a) the bridge between the web browser/server and the database should handle more than 32 K string values (IE. CLOB).
(b) the framework of the Apex (the procedure 'accept' who gets all values when you submit a page) must manage more string of 32 k values (IE. CLOB).
Now, the problem with one) should be easy enough to fix with the new listener to the Apex. If you want to use Microsoft IIS as a web server, see my [gateway Thoth | http://code.google.com/p/thoth-gateway/] which already supports the CLOB parameters. You'll always need to manage registration of great values through an application process (Ajax), due to problem b), which is that the framework of Apex does not use CLOB parameters in the current version.
However, since one) can be fixed easily in the listener of the Apex, but for Oracle set in the embedded PL/SQL gateway and in mod_plsql would probably take a lot longer because it follows the (slow) the database release cycles, I don't know if the Apex team will change the frame if the feature can only be used on one of the three doors (officially supported).
-Morten
http://ORA-00001.blogspot.com
-
Error ORA-16724: could not resolve the deficit for one or more databases in waiting
I came to work today with the following error is displayed:
February 5, 2014 01:27:19 error ORA-16778: make the mistake of transport for one or more databases.
Looks like this error disappeared but now I have the following error:
February 5, 2014 11:52:40 error ORA-16724: could not resolve the deficit for one or more databases in waiting
I did some research on the forums and I think I need backup and restore, but I'm not sure.
Here are some questions that I saw others asking in the forums:
PRIMARY:
Select max(sequence#) from v$ archived_log; -24589
Select current_scn in the database of v$. -871568619
SECONDARY:
Select max(sequence#) from v$ archived_log; -24589
Select max(sequence#) from v$ archived_log in case of application = 'YES '; -24562
Select current_scn in the database of v$. -870987797
Select * from v$ archive_gap;
Thread # Low_Sequence # High_Sequence #.
1 24563 24563
Looks like everything is working, but the error is still appearing in OEM primer.
The issue ended up being with the control file. I followed of many blog posts on how to roll forward the database before and they all said to restore the control file before you recover the database. I followed this paper: http://docs.oracle.com/cd/B28359_01/server.111/b28294/rman.htm#CIHIAADC and it worked as expected. The old control file has had 6 data files that were in a different place than the others. The new control file, I created the primary had all the files of data in one place. After correcting the control to point to the locations correct datafile all started working again.
-
How to configure the bookmarks bar to view more than 4 bookmarks?
In Firefox to. 31.0, I can add multiple bookmarks to the bookmarks bar, but if I added more than four bookmarks on the toolbar and then close Firefox, the next time I open it it there are only four bookmarks in the toolbar. I've been a techie years so I tried everything I can think of including adding bookmarks different ways... by slip and fall and/or 'Bookmark this Page', click on add to the toolbar but still, I allowed four bookmarks in the toolbar after a reboot.
Any suggestions?Other bookmarks moved into the overflow area and appear in the drop-down list of chevron or moved from the bookmarks toolbar?
You can check for problems with the database places.sqlite file in the Firefox profile folder.
-
Portege M800 - at startup "Please wait" message remains more than a minute.
Hello
I'm French and I bought a laptop Toshiba Portege M800-10v!
Currently, this pc is great! However, I noticed something disturbing.
In fact: when you start Windows Vista, I get the message "Please wait", which remains for more than a minute! I found that I was not alone! But I can't find any information on it.
You know more?
Thank you.
PS: Excuse me for my English.Hello
If you have any new laptop and if it is connected to the internet for laptop will automatically download new updates and each of them will be installed after restart. If you should not be worried about it.
Yesterday I installed some stuff on Satellite P300 friends and I waited about 3 minutes after the first and the second restart. It bothers me, but there is nothing to do. To avoid this problem, I changed the update settings and used the check for updates but let me choose whether to download and install them.
-
How can I configure Server 2008 R2 to disconnect users, who have been disconnected more than exodus 12 hours?
These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:
http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .
Thank you. :)
(I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms
-
More than 1 month and always waiting for out of stock keyboard SL410 + Win7)
Hey I'm worried that the SL410 has a manufacturing defect in the keyboard. When I hit h I hu if I typed w I get \w. This question of strike fault is not present while typing on the keyboard. I'm also waiting on a keyboard of stock since 12/04/10 more than a month. I am so disappointed by the performance of this thinkpad. Also disappointed by the s/h in the replacement keyboard. I have to call, in the request, a service representative customer to help me with my case given the length of time that I've been waiting for my replacement keyboard.
Hi Peter,.
Thank you for following it upwards.
The keyboard has finally arrived for a month and a half after the opening of the issue. When I replaced it, however, the problem persisted - which means there is a whole new motherboard. So this is a note for anyone who reads this thread with a similar problem on a SL410 - it's a motherboard problem, not a keyboard.
Who had another week to arrive and the laptop is finally usable.
Overall, it was a very disappointing experience with support from Lenovo. I don't know if it's just the SL range or a sign of things with org Lenovo support in general.
-Leo
-
Updated 9-12 volume license (first mistake). I was told we could keep volume licensing - went to write in the first person, and it is demanding an adobe ID to register and then does not recognize the license key. Cannot talk to anyone at Adobe, because all no automated, it seems, no humans. Any ideas?
Also, the email addresses are confused for licenses. Adobe 9 is under an e-mail and the upgrade is another. Adobe doesn't have more than customer either only the sales of services. I'm ready to call the dealer and tell him that she be reimbursed.
Hi Robin,
Adobe has the customer service... The quick/more easier way to communicate with them is usually via live online chat, although it cannot be opened permanently. Is that what you meant by "waiting on live help for 10 minutes"?
[Search "still need help? [Contact us" below]
It is the right place to go, as this is a user forum and most of the people here do not have the power to fix the licensing issues.
-
When I click on on the download button opens a page with three small boxes, and I think that it means a wait, but they lasted more than two hours, unfortunately and I tried much and each time gets the same thingit's working now, I want photoshop necessary and reminders even when I tried to buy the same thing happened to me Please I want to a quick solution
Make sure that you have enabled cookies and clear your cache. If he continues to not try to use a different browser.
-
Is there a way to enable and configure Volume discounts through the import spreadsheet product? Is there a way to allow more than 2 quantity thresholds?
Hi Michael,
You can set thresholds via an import file. The best way to do this (and this goes for all importable data, included webapps, 301 redirects and so on) is the following:
1. go to the Admin and create a single element, in case you create a product to test and set limits
2. export these data - in your case, export product list
3-take a look at how the data looks like in the export file to get an idea of how the format should be in the import file
Unfortunately, you cannot set more than 2 thresholds, what is not possible at the moment.
Thank you
Mihai
-
Configuration of nodes: impossible to declare more than 1 node for each type
Hello
MAWI 2.20
I'm starting a new project for the 11.5.8 to 11.5.10.2 update. I'm configuration mawi for the project (defe nodes) but I have some problems to do.
My environment is 11.5.8 with 1 db node and 4 application (not in appl_top shared) server: 1 Admin/CM nodes, node 1 of discoverer and 2 forms/web /.
I tried all my knots said but it seems I can't declare more than 1 node 1 type (web and forms). So when I try to declare my second/forms web server it replace the previous, I said, and it is not added to the existing nodes.
How can I do to cedlare all my knots for my environment?
Thanks in advance
Christophe Ortiz
No need to answer. I'ev found my answer in the FAQ on the MAWI.
Maybe you are looking for
-
Satellite L - should I download updates from Toshiba?
Hello. I ve been said on this forum that I should t download anything, unless I really have to, but what happens when Toshiba tells me to update some things probably I m supposed to? Is it fair to Toshiba tempro I with if I need all alerts or anythin
-
Windows Vista - How will I know if I have SP2 or not all ready installed on my computer?
I don't know if I have Vista Service Pack 2 all ready installed. Is there a way to know?
-
Receive a "prepairing standby" while performing Windows updates.
Windows Update Windows install an automatic upgrade on my lap top yesterday (Friday). Said they would restart automatically when the upgrade completed. Screen froze on the message 'Preparing to standby' since then. Turning off and on a few returns to
-
Cannot install Microsoft Security Essentials
get error 0 x 80070643 when you try to install MS Security Essentials.Ive tried to delete all other antivirus and spyware software first but not luck. Help!
-
FileFilter still does not?
Hello I remember in the previous SDK that a FileFilter did not work when calling BrowseForOpen(). Is my incorrect code or is it always inoperative in the current SDK? private function onAddClicked(event:MouseEvent):void{ var fileDir:File = File.appli