Database on external HARD drive

Similar Questions

• How to work with files of database on an external hard drive (USB 2.0 or 3.0)

  I have Oracle 11 GR 2, installed on my laptop. I would like to create an instance of the database on my laptop, but putting the data files on an external hard drive (USB 2.0 or 3.0). The external hard drive will be still attached to the laptop, whenever the database is used. This is going to be a development machine, recently developed a prototype. Laptop is limited to 150 GB on the local disk and I want to have a database of 1 to on this subject. Is this possible with Oracle 11 g for Windows XP SP2?
  I assume that a device attached to the network storage NAS would be the best solution, but I can't fix on my local network.
  Thank you
  Milan

  Hello

  Yes, you can
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1388988500346624289

  Thank you

• Transfer iTunes to external hard drive

  I transferred my iTunes library on an external hard drive (Seagate).  I would like to transfer CDs to laptop so that I can do it again on one of my iPod tunes.  There is no option for ' send to ' iTunes from the external hard drive.  I tried several times and failed.  I can listen to the music stored on the external hard drive but playing something other than iTunes.  I installed Win 10 (big mistake, but too late now) so I guess it's to play through their music app.  I also tried to send to the device Bluetooth drive external hard, but that no longer works.

  I plan to replace my Samsung laptop with a Macbook Pro I hope in the not-too-distant future, but for now, I'd like to tell me if it is possible to transfer iTunes from external hard drive to my laptop existing back.  He drives me crazy not less because you have probably guessed I am somewhat of a technophobe.

  Thanks in advance.

  An iTunes library is an index of media stored on your computer that has been added to the library. iTunes has to know where the files are located in order to transfer them to your device. If the albums in question do not appear in your library and then use the menu file > add folder to library to add them, and then either make them slide to the device if handled manually on the base, or adjust the synchronization settings as required, and synchronize.

  See make a library of portable split to some general information about the layout of iTunes library. According to what you have copied where in the place where exactly, and what you see currently listed, you may want to shift-Start-iTunes and open the database stored on the external hard drive or maybe copy the whole folder iTunes from the outside to the inside, or you can create a library laptop from scratch on the outside, if there only your media.

  TT2

• Save the playlist on external hard drive.

  I would like to be able to export a playlist on an external hard drive, so that all the mp3s in this playlist are grouped in the same order on the hard disk as in the playlist.

  Hello Nomad vagabond,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to export a playlist on an external hard drive and want to keep all the songs in the same order that they were when they were in the iTunes library. I have stopped at my music as well.

  This article contains information on the iTunes library:

  On the iTunes library files

  The iTunes Library.itl file is a database of songs in your library and playlists that you created.

  Thus, songs and playlists will be recorded how you created and you can move them to the external hard drive by following these steps:

  Manage and backup your iTunes library

  Best regards.

• TM is not back up My external hard drive - or is it?

  Hey all:

  I have a MBP late 2011 under OS X 10.10.5.  I use an external hard drive with a partition called TM1 for time machine and I also have an external drive, called "Movie_Storage" which is basically just for iMovie infinity that I don't have the space on my drive internal.

  I'm "seeding" a new database of time machine on a new drive and he completed the first backup of the internal drive without any problems.  I then plugged the disc "Movie_Storage" and confirmed that this disk is NOT in the list of exceptions in the TM preferences pane.  I then let him back up again.  There is a lot of data on that drive, so it took several hours to complete, but there, apparently without any problem.

  Now that everything is done, open the drop down at the top and click on "enter Time Machine".  In the tree on the left, the "Movie_Storage" drive appears as it should.  To test things, I then go out TM, eject "Movie_Storage" and enter again TM.  I scrolling backwards in time to make sure that I am actually in a backup.  The "Movie_Storage" no longer appears in the tree.

  So I open a Finder window and navigate in the TM database.  When I'm in a backup, indeed, there is a folder called "Movie_Storage", and its size corresponds to the size of the content of the "Movie_Storage" (about 800 GB) disc.  Yet, I can't navigate it in the interface of TM if the drive is not connected.  Why not?

  Of course, if the original drive "Movie_Storage" dies, I will seek to restore my backup TM on a new drive.  If I can't see it in TM without the original disk is connected, it is a problem.  Advice?

  Thank you!

  The TM interface requires the thus mounted drive you can choose files to restore. You cannot select files from the TM drive itself in the interface of TM.

  You can view the files manually in the finder to see, so you know they are there. You can mount the external hard drive and test it in disk utility to see if you can select restore from.

• I moved my itunes on an external hard drive. How do I now access it with my PC and sync with my ipod?

  I moved my iTunes on an external hard drive because of storage problems. How can I use iTunes and sync with my iPod?

  Move the iTunes database files if you do not already done, launch iTunes with the SHIFT key pressed and select this library.

  (138742)

• Project on external hard drive is missing! Help, please!

  Hello, my name is Alex Randazzo, and Ive been working on this project for the past 3-4 years and I am within a month of a feature by 2 1/2 hour of finishing. I have the project saved on several external hard drives, but I spent last week working on the project on A external hard drive, is no longer only than the other drives.

  I was working on my project, and all of a sudden a warning popped up message, warning THAT FCPX has detected a problem, exit FCPX now to save your project.

  I left FCPX, I have encountered this problem before and have had no problem leaving FCPX and restarted with the result of everything being fine.
  I did it once again.  But this time, when I opened FCPX back, my project disappeared! I don't know what to do!

  The project is loaded in the timeline panel, but the project is empty.

  The event is raising Dragons Movie0 and it is the only one who doesn't even have a box of purple and the star.

  

  WWhat version? What OS? Close the application. Go in library bundle and place the flexolibrary file in the trash. Relaunch the application. If the database rebuild you will have to try to open a recent backup.

• Move the Windows Media Player files to another external hard drive

  The hard disk that contains the files from my Windows Media Player 10 is dying.  I need to move the data to a new hard drive that I bought, but have not yet connected to my PC.  Old and new external hard drives are plug-and-play.

  I have a lot of additional information to the library and want to be sure that I don't lose in the process.  However, I have not found anything in the documentation that tells me how to move my database from one hard disk to another.  Can anyone help?

  If music files are in MP3 or WMA format, so most of the information is also stored in the files themselves, so that these information will be retained when the files are moved. There are a few fields that are not stored in the files, such as play account, custom fields and possibly star ratings. In order to preserve these fields during the movement of the library, you can use the backup of the metadata tool.

  Tim Baets
  http://www.BM-productions.TK

• I don't see the photos on my external hard drive with windows Vista Home Basic

  Hello

  I bought an external hard drive Sansung to save all my music, but when one copy all my external music files hard drive thumbnails disappears. I uncheck the "always show icons, never thumbnails" in folder options, I tried large icons on display options, I even checked "display thumbnails instead of icons" on the Visual effects tab in the Panel of the Performance in Advanced system settings. ' " Prevented, Windows Vista is not able to see the photos in my external hard drive.
  What should I do?...
  Looking forward to your audience you shortly.
  Thanks in advance,
  Charlie

  1. click Start allprograms,Accessories, System Tools folder and Disk Cleanup
  
  2 check the photos and click OK.
  NOTE: Cache view the size of your thumbnail. More browsing, it can make.

  3 click delete files button on the confirmation window.

  4 disk cleanup will now clear thumbnail cache and close.

  This should clear up your tiles and once you access the program again the cache database will be recreated with the right thumb nail (we hope).
  "copyed from another response to a thread similar to yours from"martin-support engineer.

• Windows 8 ceased to recognize the external hard drive.

  Original title: Windows 8

  Windows 8 stopped recognizing my Seagate more 1 TB external hard drive. It worked fine for months and just stopped to acknowledge, also my Adobe Reader XI stop working. I get "internal error" when I try to use Adobe PDF. Moreover, ARO 2012 program will not finish analyzing the registry database. I uninstalled and reinstalled this program muliple times. Y at - he was a stooge computer can solve the problem by myself? Please help me. I will send $ 1 million to anyone who can tell how to solve this problem. Michael Story

  Just moved my hard drives and data to new Windows 8 System. They had been in an XP system - none were never drives on the system. I put a solid state in machine it's like my C drive, and I had a smaller State such in my XP machine.

  External hard drive has worked until I tried a few copies of largest I had crashed and has been implemented of the BU as it should.

  After about 5 minutes on a consistent basis, the green light on the drive is out and it is no longer recognized.

  So I have the drive click right and clicked on properties and tools and selected the option to check the disc - not optimize it.

  Soon, he came back and said everything is fine, but you can scan if you wish.

  I scanned and the scan found bad things and seems to have stopped

  There is no option to correct but he told me to fix.

  I closed the message thought I would find a way to fix it after that I erased the message when a repair analyze and fix the Panel came and I clicked it to move forward.

  After minutes the Green drive light is out, but the thing seemed to work, but it took forever.

  I stopped, powered external drive on and outside, disabled protection cirus and restarted the tools again and this time it took me right to repair. After minutes the drive light exploded again but this time I let him keep Chuck.  I come back about a half hour later and he was properly executed and repair the disc and the drive light was again.

  I have not ran the copies still no problemo!

  Thanks to all the people who gave me good ideas

• Cannot restore to external hard drive

  Hi all

  I use Premiere Pro for a while, and I'm pretty comfortable with it. However, I could not yet find a way to make an external hard drive. Every time I make it says that there are approximately 32 GB of free space to return in. But my external hard drive has 1.42 TB of free space.

  I have chaged the location of "Media Cache files" on the external drive.

  I changed the location of "Media Cache database" on the external drive.

  Every time I make again, he says there is only 32 GB of free space on my computer. I really need to be able to return on the external hard drive, because I work with a large amount of high quality video every day.

  Is it possible to make in my external hard drive?

  Thank you!

  Wow, I actually just found the solution.

  If you go to the project settings and in the tab "Scratch the disc" change them to locations on your external drive return on your external drive.

  Thank you all!

• Restore an external hard drive

  Hello
  
  I can restore old rman backup on external hard drive with USB3? the database size is 430 GB.
  
  Thank you.

  damorgan wrote:
  I've never tried, but I hope that the answer is no.

  I did, and unfortunately, the answer is 'Yes' ;-)

  RMAN has not all opinions on where you restore your backups, as long as there is addressable space in your system (which is mounted with a path or a letter, depending on your operating system).
  However, I would not do this on a production system, only for the creation of backup/recovery audit/development system.

  Johan

• Potential new user - several work stations and external hard drive

  Hello

  I am considering the purchase of Lightroom, but wanted to run my script by the group to see if it works for me.

  I have a desktop at home and at work, in addition to a laptop that I use when the place. The laptop is only used to unload the memory cards and do organize basic, not image processing.

  At home, I have a database of image (XnView) that I use to organize my files, and then go to the bridge to convert my RAW TIF files. When I did work on my images, I use Beyond Compare to synchronize my internal image with an external drive. Outside we're going with me both as a backup, but that allows me to do more editing on my schedule for dinner. Any changes to the work is then synchronized to the internal drive to the House.

  At home, the internal drive is designated as H (I use Windows) while the outside is the G drive. At work, when I plug the external hard drive, I put to come as the H drive. In this way, the files of database for XnView, residing on both internal and external, discs are loaded and XnView is none the wiser. OK, so that was a long introduction to my questions...

  First of all, if I use Lightroom, can I use it on multiple computers as long as I use it never simultaneously on more than one?

  Second, if I save the catalog on the internal H drive home, and then synchronize on the external drive, Lightroom to work just start and play these files of database unconscious because it is now an external hard drive?

  Third, Lightroom has a built-in synchronization feature to do this, or I would continue using Beyond Compare to synchronize the two disks until I run Lightroom?

  Thank you!

  Mark

  www.NorthernLight.net

  www.Pinnacle-VR.com

  www.Virtual-Travels.com

  Just to add. I use LR on two machines (sometimes three), there is no problem with the license, there is no activation and LR is designed for the Pro who obviously needs to be mobile. The images in the catalogue are on an external drive. These are also saved on my studio machine. The catalogue is also on the disk external and also duplicated on both computers. and saved on separate hard drives.

  I work from the catalog on disk external when working on the top of the Tower in the studio, or as appropriate on machines borrowed in the field. Some would say that a catalog runs slower on an external drive. While the construction of previews, recording of the xmp data (or in my case direct to DNG) and import are a little slower with the help of an external drive, there is not slowing the work of real treatment.

  It means that I have a general catalogue of all my images which is always up to date. It works very well without any problems.

• I imported my photos from an external hard drive in Lightroom, edited my photos but then...? !

  Adobe,

  I imported my photos from an external hard drive in Lightroom, edited my photos and when I decided to export the originals had not been updated and deleted photos were not deleted. How I set up so that once I have import photos, edit and export they are then placed in their original case reviewed and updated?

  I managed to export photos to another file, but they were exported with an Adobe.xmp file. What is it and is it necessary?

  Thanks for your help!

  OK then so when you export edited LR images to tell the Office I do not need to use xmp files unless I want then to re - edit still say in Photoshop or another app?

  You don't need the files xmp during the passage of LR to Photoshop. Right click on the image or in the develop module, click Photo > edit in... According to what you have set in the preferences of the image then opens like FFT, JPEG or PSD - 8 bit / 16 bit - and the new TIFF file for example automatically will return to sitting next to the original RAW LR library. If you are exporting a RAW file edited to the desktop to JPG/TIFF then changes will be permanently stamped in the EXIF of the created files.

  Basically import my Raw files on the drive from Carmera card, then in LR. Edit in LR, finishing and export again say in the office. Keep or throw originals that I please...

  Yes, but why would you throw your originals? You can later return to the original and the re - change all over again new experiences learned etc..

  Can I see the modified pictures made in Photoshop in LR later?

  Yes, see first paragraph above. If you already have a file in LR, take it in Photoshop as a JPG/TIFF/PSD, it will be automatically reduced in LR. If you modify a file outside the LR and that is not already in the LR library, say by locating the RAW file in Explorer and then open it directly in ACR/Photoshop, then LR will have no idea what you did except in LR, you choose to import the image later. Remember though, this is one of the examples where you will need to configure save metadata in xmp (at bridge) so that when you import the edited outside the file RAW LR, LR will read the xmp file changes and save it in its own database.

• When I deleted a picture of my MacBook, why it also remove the external hard drive?

  So I tried to help my wife to free up space on his MacBook Pro by putting all of his photos on an external hard drive. After iPhoto slide the hard disk and wait 40 minutes so that he could transfer, I wanted to make sure it worked. I ejected the disk and then plugged in. Of course, all iphotos were still there. Just to be sure, I deleted one file in the folder on the computer's iphoto. I went to my shock and horror, the external hard drive, that it has been deleted it too! How is that possible? I've been scouring the Internet trying to retrieve this file with no luck. It was not in the trash. There is a tab "recently deleted". Time machine was not turned on. iCloud shows nothing. I can't download any software, because the computer is completely filled. How is it possible that by deleting this folder on the computer he did also leave the hard drive? AND it has not been saved in the trash? I have used PC, and whenever I need something in return, he was ALWAYS in the trash. And if I deleted something on the computer with an external hard drive connected, it would NEVER be removed from the external hard drive at the same time. I'm so frustrated and feeling SO bad that I deleted a folder with important pictures of our kids. Is that what I can do to recover the pictures? Any help is greatly appreciated.

  You used Time Machine at all? I see you say it was not on, but it never on and is at - it a backup Time Machine on the Macbook Pro?