Date of QR code merge error.

Similar Questions

• The configuration of your Pc startup data is missing or contains errors: 0x000014c error code

  Hello

  See if any body can help here... I get this blue screen:

  ************

  RECOVERY

  Your PC needs to be fixed:

  The Configuration of your PC startup data is missing or contains errors.

  file:\\EFI\Microsoft\Boot\BCD

  Error code: 0xc000014c

  You will need to use the tools of recovery on your installation media. If you do not have any installation media (like a disk or a USB device), contact your system administrator or the computer manufacturer.

  Press ESC for UEFI firmware settings

  ******

  First of all, I could enter option 11 and run the factory reset, I was so happy because I thought it won't be easy... but then after I did the factory reset... I get this blue screen. If I press ESC I get into this next screen:

  F1 system information

  F2 System Diagnostics

  F9 boot device Options

  F10 BIOS Setup

  F11 recovery system

  ENTER - continue starting.

  This is what happens when I click on one of these options:

  F1, I enter the system of information without any problem, then I click on to continue and return to the screen last... so I press F2 and super, I'm able to run the Test of memory and hard drive check 100% without any problem in one of those who, after that I'm done with my tests I press exit and I'm back to F1 , F2, menu etc... now I want to try F9, F10 or F11. disappointment in this option 3 I go back to the blue screen described at the beginning of this post. (I already plug in a USB key with a bootloader, which works perfectly)

  so I can't do anything, nothing at all! crazzines.

  So what I did to check why I can't enter BIOS or at least to boot from my USB... I removed the lid of my laptop botton and removed the hard drive and is then, how I was or I am able to log in the BIOS - I made the changes to start USB first, then the HD and that's how I was able to boot from USB - BUT if I connect the hard drive back I'm not able to enter the BIOS or boot from USB - so basically I'm stuck in this blue screen and I can't boot from a USB key, if I connected HD... I can't use any option... no BIOS, nothing... So yet again, I disconnect the HD.

  This is one:

  HP ENVY Sleekbook TS 4

  If you can't access BIOS with the HDD connected, you certainly won't be able to start on the recovery USB. This is indicative of a failing hard drive.

  Install a new drive hard and then start on the recovery key.

• I can't date MY SYSTEM, I GET a CODE of ERROR 'WindowsUpdate_8024D00A '.

  I can't date MY SYSTEM, I GET a CODE of ERROR 'WindowsUpdate_8024D00A '.

  What is the build number of your version of Vista
  «If you are looking for the number of exact version of Windows Vista, you can find it by running 'winver'.»

  Something before 6000 is the pre-release version of the software

  TaurArian [MVP] 2005-2010 - Update Services

• data 0x80070000D invalid code error

  I bought my computer HP Pavilion Elite 91801 at Future Shop - they set up the system and installed Vista.  I also got the news to
  ask for free update to Windows 7 Vista.  I received the disks in the mail from Windows 7 Upgrade program in Louiseville, Kentucky and installed
  It me when received.  I can't remember the exact date, but it was a day early2011.  Suddenly, the last week of June 1, 2013, I'm
  the windows do not enable error and the 0x80070000D - data is not a valid error code.  I have absolutely no idea why this message is received at this late date.  Looking for my programs, I see there was an automatic update - I wonder if this is what could be
  the origin of the problem.  Regardless, it's makes me crazy, because I feel that I continue to do all this than suggested and I keep going in circles.  Can someone help me please?  Thank you!

  Hi Weezie,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• code 80070017 error when you try to downland microsoft office service pack 2 on vista

  code 80070017 error when you try to download microsoft office service pack 2 for vista

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  This problem may occur if there is a failure of control of cyclic redundancy (CRC) check during the update process. This failure can occur if the received file is not the file that is expected by Windows Update

  Run the Chkdsk.exe tool to check the drive for errors

  If this does not help, then manually download the update you need and see if that fixes the problem.

  Description of 2007 Microsoft Office Suite Service Pack 2 (SP2) and of Microsoft Office Language Pack 2007 SP2
  http://support.Microsoft.com/kb/953195 TaurArian [MVP] 2005-2010 - Update Services

• Get a Code 10 error "this device cannot start' for my optical drive

  Hello

  I am running a Dell Studio 540 with the following specifications:

  Processor: Intel Q6600 @ 2.4 GHz

  RAM: 4 GB

  HD: 750 GB 7200 RPM SATA

  Graphics card: nVidia 9800GT 512MB

  OS: Windows Vista Home Premium 32-bit

  All the drivers and BIOS are up-to-date.

  My current optical drive is an Optiarc DVD +-RW AD-7200 s ATA Device Unit which has now disappeared from "My Computer". By opening the Device Manager, it has a small yellow triangle with an exclamation mark inside. When I click on it that a new window will open and in the device status area, he said:

  This device cannot start. (Code 10)

  Currently, I have tried two methods without success. First, I downloaded the latest drivers/firmware for the optical drive directly from the Dell Web site, but to try to install, I get an error box saying that the "target drive is not properly".

  I also ran the Mats_Run.devices of the Microsoft Automated Troubleshooting services who correctly identified the problem, but said he could not address them and directed me to these forums.

  Any help would be greatly appreciated.

  Thank you for your time,

  Donald Lundie

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  As you have already tried updating the drivers for the device, you can just go through the article that talks about the Code 10 error.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/

  You can run the fix in the below article data and check if this is useful.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Code signing error

  Hello

  I have this quite annoying error for my blackberry 5.0 application. Most of the methods and classes of RIM is display code signing errors when I'm clearly registered my app and the app runs on my camera as well. I'm unable to retrieve all the data from my db but I am able to write data to my db. Help, please.

  Thank you & best regards

  Vishnu pascalp

  OK I got the problem. The .cod file was not have written... its working fine now.

  Thanks for the help.

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Need to reinstall the driver for (Mono Audio) BH29, code 10 error.

  Original title: There is a problem with the driver for BH29 (Mono Audio).

  There is a problem with the driver for BH29 (Mono Audio). The driver must be reinstalled.

  The device of information information

  Name: BH29 (Mono Audio)

  ID: BTHENUM\ {00001108-0000-1000-8000-00805F9B34FB} _LOCALMFG & 000A\7 & 193F9B9F & 0 & 001A7DFC60D1_C00000002

  Error code: 10

  Hi MohamedAbou,

  To provide the proper resolution, I would need more information on your side.

  1. when, exactly, you get this error code?

  2. did you of recent changes on the computer before this problem?

  The Code 10 error produced mainly because of the equipment and devices, driver problems. It can also occur due to problems of compatibility between hardware and software drivers additional that are installed on the windows.

  I suggest that you try the procedure described in the article and check if it helps.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: Applies to Windows 7.

  Check out the link for more information.

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-in/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Get code 0xc004c008 error a copy bought Windows 7?

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - JCHWC - J23H9-CMWFT
  Windows Product Key hash: 0gKVgpfWDwqDd/4hI0K7OxX8okc =
  Windows product ID: 00359-033-7500187-85475
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {CE4A6A15-19A0-4980-88EF-5FCC8F5AA7F3} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CE4A6A15-19A0-4980-88EF-5FCC8F5AA7F3}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-CMWFT00359-033-7500187-854755S-1-5-21-745191812-4287120939-2045925680to be filled by O.E.M. power O.E.M. American Megatrends Inc.. 0901 20111124000000.000000 + 000ACBA3607018400FC04090409Time(GMT-08:00) Standard Pacific03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00170-033-750018-01-1033-7600.0000-2212012
  Installation ID: 016392967310880886379224864703810255403124641905613683
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: CMWFT
  License status: initial grace period
  Time remaining: 32220 minute (s) on (22 day (s))
  Remaining Windows rearm count: 3
  Trust time: 16/08/2012-12:09:46

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 8:10:2012 05:41
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEAln0WGzzoVPlGUngZrIvcFAw3Yj3KxL5EyGA =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  SSDT AMD POWERNOW

  Try the following numbers of direct activation

  Direct activation number: (888) 725-1047

  1-800-936-5700

• Test error code: 08-error has been detected by repairing bad sectors. WD 4000BEV external.

  Hello
  Just scanned my external hard drive Western Digital Data LifeGuard Diagnostics. Even now, I did not face any problem with my hard drive, since I've not scanned for any AGE of bad sectors, so I thought to search for bad sectors and to repair, if it is there.
   
  Test option: EXTENDED TEST
  Model number: WD 4000BEV external
  Firmware number: 1.05
  Capacity: 400,09 GB
  Smart function: PASS
  Test result: FAIL
  Test error code: 08-error has been detected by repairing bad sectors.
  Test duration: 02:44:39, August 5, 2013
   
  so, what should I do now? I'll ignore it or are at - it another way to fix/repair bad sectors.
  Is there another way where windows 8 will help my external HARD to fix/repair disk bad sectors?
   
  Please answer soon.
   
  Bye,.
  Siva

  Hi Siva,

  As the material ages during normal use and other sectors begin to fail. Finally, the spare parts store is out of stock, how new bad sectors cannot be erased and are detectable in threrefore tests. T hard drive is at the end of his life at this point, I suggest you make a backup of all important data.

  You can also post your request in the forum of the community of WD:

  http://community.WD.com/T5/WD-external-drives/CT-p/external_drives

• I tried to upgrade my Mac Lightroom 2015 version 6.0 to version 6.3, but it is not possible. "Code of error: U44M2P28.

  I tried to upgrade my Mac Lightroom 2015 version 6.0 to version 6.3, but it is not possible. "Code of error: U44M2P28.

  Hi [email protected],

  Please uninstall Lightroom using Adobe cleaning tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Then download and install the updates from Lightroom 6 from the following link: keeping up-to-date for Lightroom

  Kind regards

  Tanuj

• Help!  Get pop-ups with CODE of ERROR: sec_error_X1X510_A

  I have an iMAC end of 2012, 3.4 GHz Intel Core i7, 16 GB 1600 MHz DDR3. NVIDIA GeForce GTX 680MX 2048 MB, El Capitan iOS

  When you use Safari, Google home page, I type a domain and it goes to what I believe is a pop-up fake Apple Support with CODE of ERROR: sec_error_X1X510_A.

  Need help solving this. THX

  You have probably installed some adware. Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• What is the Code for error AHT 4HDD/11 / 40000004:SATA (0,0)

  What is the Code for error AHT 4HDD/11 / 40000004:SATA (0,0)

  This means you have a hardware problem related to the hard drive. The disk may be corrupted or fails and must be replaced. Save your file as soon as POSSIBLE. If the player does not have little time for the backup.

• Hidden properties and PropFlag_Hidden gives - failed [Code of error-17500] Popup

  We use a User Interface LV (8.5) TS (4.0), which is a modified version of the Interface of LabVIEW Basic comes with TestStand.  Our user interface is pretty basic; It allows the selection and execution of the sup within these sequences sequences and test sequences.

  Our selection of void sequence control is a Combobox of sequences which is filled automatically by TestStand, for sub sequences when a test sequence is selected by the user.

  Our problem is this: our test sequences have a number of sequences of void, which some we want the user to be able to choose, through our Combobox sequence, and others who must be visible to the user.  We use PropFlags_Hidden flag staggered with the Options of Station-> view hidden properties (disabled) to remove sequences hidden from the Combobox of sequence.  Unfortunately, when the user selects one of the selectable sup sequences, TestStand displays a popup with the text 'Operation impossible [Code of error-17500]'.  If we choose OK on the popup, we can run the sequence of select sub without problem.

  If we set the Options of Station-> display hidden properties selected, all the Sub sequences that are supposed to be hidden appear in our Combobox sequence (as you know) and we get not the popup has failed when you select one of our sub slectable sequences.

  I wonder if anyone has seen this before and can offer advice.

  Thanks for reading

  Steve B

  Hi Sylvie

  Thanks for your reply.  Yes, sorry I have not to explain my problem very well.  Luckily we found the cause and have a solution in place.

  It seems, if you have the file of unique sequence with several sequences it contains (some others not hidden), no hidden sequences must appear above the sequences hidden in the list of sequences.  The reclassification can be done in the editor of sequence or programmatically through the API.

  Thanks again

  Steve