DB Access insert problem

Similar Questions

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• Windows cannot access (insert computer name) __Please check spelling or there may be a problem with your network.

  I am networking a few new machines windows 7 to an existing with both Vista and XP computers already on that network. I implemented a working network and opened ports in our McAfee Firewall that windows is recommended. However even if the older OS machines can access windows computers 7 and Windows 7 computers can access the older operating system, windows machines 7 cannot access each other.

  The computers appear on the network, but when they try to access an error message is displayed. I even tried to uninstall McAfee, but the problem persists. What is the problem?

  Hey Jessi9,

  don't know if you figured it out yet. I just installed windows 7 ultimate 64-bit 2 days ago and have been pulling my hair on the same issue. everything seems to be configured correctly, no? I ended up watching the setting of my NIC for awhile and realized the rest of my computers do not use TCP/IPv6, everything else is using v4.

  SOLUTION:

  So, go into the settings of your network card, scroll items and uncheck the "Internet Version 6 (TCP/IPv6) Protocol. Click on the Version 4-> properties-> advanced-> WINS-> you ensure that what follows is enabled, "enable NetBIOS over TCP/IP.

  your computers now appear?

  * also, I'm sorry to have proposed the previous post as an answer, I clicked on it by mistake and there is no way to undue it.

• PIX Firewall 525 access list problem

  Hello.

  I have the following problem. After insertion of an access list, despite seeing the packages associated with the list, they do not "match", that is, it is as if the list wasn't doing his job.

  Who can be the cause of this behavior?

  PIX 525 model

  IOS 6.3 (4)

  Thank you.

  Marulanda Ramiro Z.

  Are all of syslogs sent properly to the remote host? If so, I would say that the udp connection is never closed by the PIX. Let's say that the connection never hit the timeout in the pix config. If the connection remains open and doesnot increments the hit count for your access list. I have a PIX that makes the same behavior.

  The increase in the number of accesses is also based on the connection and not on each packet passing through the PIX.

  You can use a debug command to see the packets through the PIX.

  HTH

  Mike

• Qualcomm Atheros AR9485 limited connection and cannot access network problems

  Qualcomm Atheros 802 AR9485. 11 b | g | n WiFi adapter

  When I first my laptop HP 019WM-14N, everything was fine, but after that I have upgraded to windows 8.1 (from Windows 8) I started having problems to stay connected to the wifi.    I get a "limited connection" that would be clear me off and auto-reconnect causing delays and a page "can't access the network.    Pilot was: 03/05/13 3.0.1.55.

  Then there was an update of the windows updated the driver to 25/11/2013 10.0.0.74 and that's when things are worst.   Now he dump me off sometimes every two minutes and sometimes it will not be for an hour or more.  It is very random, but when things go wrong, it does nothing and I have to connect it to our wired to work around.

  Today, I deleted the driver I got from 10.0.0.74 11/2013 and rebooted to reinstsall the orignial driver (3.0.1.155 5/3/13), but things are even worse now.   I deposited 3 times just typing this.

  Is this a compatibility issue with the Atheros AR9485 and Windows 8.1?   What is the solution?

  Please uninstall all the drivers of the QCA9000 series and try this Driver Qualcomm Atheros Wireless LAN QCA9000 series.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Trying to access the files on an external drive. It is denied. Some files are accessable. / problem solved. But please help me learn.

  Hello.

  I use XP Home 32-bit Edition. My a-external hard drive is a Western Digital My Book Essential 1.5 Tb USB2 HARD drive: model number: WDBAAF0015HBK-00.

  I can't access all files on the external hard drive. Currently, I mounted it on a folder. I have some files tif on the external hard drive and wanted to access my photos.

  The message that I had to right click and select open with was "access to C:\(Folder tree) denied." I tried my programs and the Windows Picture and Fax Viewer of image editing. Nothing works.

  When I right click on the images of problem the only options I have are: open, print, edit, Preview, open with, send to. None of these work.

  Some files are not accessible, and others. Unaccessable files do not have a preview image in the window pane (on the lower left side when I'm in the folder).

  This can happen if I didn't 'delete safetly' external hard drive or there was a Brown out? Some of the tif are too long file extensions? Shouldn't windows warn me too long file extensions?

  I consulted the havn't the reader for a while.

  I can not drag and drop the files to my desktop. I can't copy, cut, delete or move the files. When I click on a file, and then click file - properties: nothing shows up and he says: size: 0 bytes, size on disk: 0 bytes. But when I click on the file in the folder, it says that it is 23.3 MB. I can move the folder on my desktop.

  When I select all the files and click on file - properties: it is said attributes: read-only and hidden. They are green in box, I have not did those and it does not work. I clicked on Advanced Options, again I had unstapled the ReadOnly and hidden, then I unchecked all 4 options because they were greenboxed too. It's green boxes, not the check marks in both situations. What are the green boxes?

  ______________________________________________________

  Fixed a problem. I dragged and deposited the files on my desktop and I can access it. At this point, I just thought, since I had problems with the music files (mp3 or wav) is too long and is not be able to access or remove them, but I can delete the folders to get rid of them.

  So my question is why am I unable to access the files? This is a limitation of my external hard drive? Can I test or repair? What is this kind of disk with this version of Windows? What is a format? It's NTFS. Computer management indicates that the external drive is healthy.

  It seems that some files are not named as long as others and I could access those. Is there a limit on character/attribution of Tif or all types of files? If so, is it the same? Pourrait - linked to the way in which the external (or internal drive?) is setup in the policies tab? Are each disk different? They seem to be a little more limited than the internal hard drives, but I'm not sure if this is a limitation of the usb2.

  Does anyone know if there is a program or a way to know how many letters or numbers have been used? Microsoft Word and Works a number of words, but Works 9 (I have that) doesn't have a number of letter.

  Contradict you yourself.  At one point, you said:

  > I can not drag and drop the files to my desktop. I can't copy, cut, delete or move the files.
  and then you say:
  > A problem fixed. I dragged and deposited the files on my desktop and I can access it.

  This side, the general approach to access in this case is "Ownership" of these files.
  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  This probably occurred because the files were created on different computers by users with different Secure ID (SID) or you have reinstalled Windows and files were protected to some extent.  Since you are using XP Home Edition, the only way to see the security settings is to start your computer using safe mode and log in as an administrator.  This will give you access to the 'Security' tab when you right-click on a file and select 'Properties' (as described in the article above).  Apart from connecting with Safe Mode, you can use 'Cacls' command from a command prompt window (start-> Run-> "cmd") to view or change permissions on files

  "Cacls": <> http://technet.microsoft.com/en-us/library/bb490872.aspx >

  HTH,
  JW

• Account administrator and user, Windows 7 Premium access control problems

  We have a problem with a HP/Compaq Windows 7 Premium machine 4 months old and we cannot allow any request of the UAC.

  An account on the machine is a "Standard user" without password, but when we do something like put to day or what the icon shield it and require permission from the Admin we cannot.  The alert box will appear asking you to Admin password (with no box to type, besides whom there is no account active Admin but maybe only the Super Admin account 'hidden' which is off), but also the 'Yes' button is gray and only 'no' can be clicked.

  Support PC World were unnecessary, saying full install, their stock response.  Tried enabling the 'super administrator' hidden account think it worked once before when I need administrator rights to install the software, but as unable to run CMD prompt as administrator (again because UAC comes into play), I can't seem to do.

  So now stuck with the new machine and messing around on the fighting with the OS: s I thought rightly or wrongly that the activation of the hidden Admin account would do, I'm sure that's what I did before, but I keep hitting the problem guest UAC as described above.  Therefore, the following does not work:

  ______________________________________

  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: yes

  Log off, and then log on to the administrator account
  Make the appropriate changes to your accounts

  Log on to your account
  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: No.

  ______________________________________

  I tried to click with the right button on CMD prompt and checking run them as administrator on the drop down menu, but UAC prompt comes up, no luck.  Also tried setting to "Run as Administrator" when raising the properties by right-clicking... same result.

  Also tried cursing at the machine... same result: o

  Any help appreciated because I'm sure that I've done it before, and there is a way to pass the CMD prompt.

  Ah finally solved.

  HP Compaq machines have their own start to use for recovery etc. software (accessible by pressing the ESC key), so I went into the system recovery using the backup utility to make sure that the external hard drive was last week 'missing' files, and then cancelled rather than clicking on the side to supplement a system recovery.

  This gave me the traditional options of safe mode,... networks, prompt etc.  Choose Mode safe mode with command prompt and Super Administrator hidden account was visible as well as the Standard user.  Choose the account super administrator, connected, activated the password protect and define it.

  At the command prompt enter:

  NET user administrator / Active: Yes

  Restarted as Standard and UAC user now works fine.

  It all started because of a need to install Open Office and then down the line a cutting machine, interrupting a Microsoft Backup, which could not be restarted without password Admin and user access control issues as described above.

  Is not to hide the Admin user at all now!

• WRT54GS V5 - router to access the problem after reset

  My router worked with the exception of not being able to add a new laptop to wireless access. I suspect that my original password may have been messed up in the last two years, I've used it. I decided that I had to reset to the factory settings and start over, adding MAC addresses and passwords reset.

  After several attempts, I started to enter a password loop where she'd just off the coast of the verification of the settings and come back with a new password box. I have tried both direct access through 192.168.1.1 and using the V5.2 Setup disk.

  After these failures, I checked your forums and elected to try a hard reset by:

  (1) power off router, Modem & computer.

  (2) disconnect all cables from the router.

  (3) power of router, enable 3 m restart

  (4) press on & hold reset for a minute, watching the power button flashes. Observed and released continues to Flash. After a few minutes, unplugged the power supply to the router.

  (5) PC cable reconnected to the #2 port. I hit the brakes the cable Modem as I suspected my computer trying to autostart AOL may have had a problem.

  (6) set the router under tension and allowed him several minutes to restart, then power & started the PC.

  (7) indexed in 192.168.1.1 and it entered my screen AOL (with AOL not connected, & no modem connection).

  (8) start of Linksys screen seemed to ask for password. I entered "admin", then after a break but I have once again the password screen. Reinstated 'admin' a few times more.

  (9) even and repeated steps 7 & 8 again with the same results.

  (10) using the CD Lynksys v 5.2 access attempt.  -with the same results: a password loop.

  I concluded that I needed to update my firmware before trying again. I managed to download the file for the V5, but when I tried to run I had a matter of Windows 'OPEN WITH?'

  I have absolutely no idea and was not able to find an answer in this forum, although I don't know that there is somewhere.  If I can't find it, though, there is not. It took me a few hours to find how to add a new topic in a post.

  I hope that someone can suggest something. The router works fine with systems that were connected to the front.  I also noticed a reference to the evolution of one of the parameters to 192.168.2.1 (or something). I'll have to try to find this page.

  This Site is very difficult to navigate. I also tried copy and paste comments to the WORD, in a format that is more practice/more dense with some difficulty because of the color of the text. The Site is pretty (and I'm an industrial Designer) but the function must always take priority.

  Thanks in advance,

  Norm

  The reason why the admin does more work as router password because you have setup a router password, not knowing, in the first time install you your router... If you remember the router password when you used all first your installation CD to install your router then enter this password...

  If you don't remember the password, then you need to reset the factory settings (I know that you have already reset the router) is...

  Press and hold the button to reset for a minute... Release the reset button... Unplug the router power cable, wait 1 minute and re-connect the power cable...

  Make sure that your computer is set to "Obtain IP address automatically", disable any firewall, the security software on the computer...

  Adjust the browser settings - open an IE, click on tools > Internet Options, and then delete all files, cookies, history, forms... GoTo 'Connections', make sure that never Dial a connection is selected, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase... See if it accepts...

  If the above fails, connect another computer to the router and see if you can access the router web interface...

• I get the error to access the problem when installing QuickBooks Pro fonts

  WHY do I receive THE MESSAGE (THERE WAS a PROBLEM ACCESSING the FONTS0 WHEN I TRY to INSTALL QUICKBOOKS PRO

  Hello

  Try these steps and see if that helps.

  a. right click on the shortcut icon on the desktop of QuickBooks, and then select Properties.
  b. click on the Compatibility tab.
  c. Select run this program in compatibility mode for and select Windows XP (Service Pack 2) from the list.
  d. Select run this program as an administrator, and then click OK to save the changes.
  e. open the configuration file.

  If the problem persists, please post your question on the forums for assistance from intuit.
  http://community.Intuit.com/QuickBooks?14@@.ef91d88/6

• debugging access server problem

  I'm unable to connect ISDN users via access servers there is some problem among raduis, the access server and billing machine then I felt I need to debug on the access server, but when I go to run the debug command first, and then I m get no output, below is the reviews. What is good order? I enabled debugging, but I cannot see the logs (outputs) so missing here. Please answer me as soon as possible.

  AS5300a aaa #debug?

  Accountant accounting

  Administrative administrative

  attr AAA Attr Manager

  authentication

  authorization authorization

  AAA DB DB Manager

  ID Id Unique to the AAA

  IPC IPC AAA

  attributes of each user by user

  treatment of POD Pod AAA

  treatment of the AAA Protocol

  SubSys AAA subsystem

  AS5300a #debug aaa VAC

  Aaa AS5300a #debug accounting

  AAA accounting debug is on

  AS5300a #sh deb

  AS5300a #sh debugging

  General operating system:

  AAA accounting debug is on

  AS5300a #.

  Hello

  You can use terminal no monitor to turn off the same and also check this link for setting up an external syslog server to collect system logs.

  you use syslog software installed in the external system to collect the newspapers.

  the best bet would be kiwisyslog s/w, which is very easy and roubst.

  You must configure your router and point the same to send messages to the external system.

  http://www.Cisco.com/en/us/products/SW/iosswrel/ps1835/products_configuration_guide_chapter09186a008030c760.html#wp1001176

  regds

• Update the registry access denied problem

  Hi all
  I use win7 ultimate x 64 as a MSDN. English version.

  This week I tried to install privateinternetaccess.com's private Internet access software.

  The installation failed and it turns out that I have some sort of error message access denied on updates of the register.

  I just tried to upgrade to the latest version of vmware player and I get this message:

  The MSI failed "C:\users" (the msi vmware)

  Could not write value for the \system\currentcontrolset\services\vmware\performance key. Check that you have sufficient access to that key or contact your support team.

  Since this is the second product which complained access refused to write a registry entry, I think that the problem is really that there is a problem in writing to registry entries. I'm an admins on the machine and I am the only user of the machine. I have had the machine for three years so I admined in my user name years.

  I went looking for a restore point that is usually automatically created by windows update. But when I checked for restore points there is not. This seems odd. I've seen windows update tell me he was creating restore points.

  What I want to do is to see if I can go back to a previous state relatively easily. But I can not find the opportunity to go back through the windows update process. Because I thought that windows update took points of restoration and protection of the disks in drive C is turned on I didn't manually restore points.

  So my questions are:

  Q1. Has anyone seen a problem where the ability to write registry keys is suddenly disabled for a user who is an administrator? I can't imagine just trying to install privateinternetaccess has disabled my ability to update registry keys. There must be something else that would have caused this. I also had Director of windows fails, and I could not make it work for a few months. It could be related.

  Q2. If I did not restore points manually and the disk protection is enabled for the drive C and windows update has updated the operating system for years. How should I go back a month or two, through the windows update option? Is it possible to do?

  Q3. If I can reinstall everything else fails. I put the MSDN DVD in the machine to run through the process of preparation for resettlement. When he asks if I want to update or install quite a new OS with none of the backup files, I said it upgraded. But in the phase of 'control' it says that the OS on the machine is newer than the operating system on the DVD (DVD win7 is 2009). So I wonder if I would have to reinstall the OS from scratch.

  This has been a very annoying problem. I can't, for the life of me, find out how my ability to write to the registry is blocked as an admins. I can only imagine that there is some sort of permissions problem where something said that writing in the register should be blocked. The only thing I can imagine is that some app, perhaps privateinternetaccess has changed a few settings to block updates.

  Another thing. I recently bought a small mp3 to wear while jogging. He was not able to find the update of the driver on this machine, so I tried to plug it into my laptop running win7 as well. The pilot was found immediately. It was a week ago. So this could be another symptom of this problem where the driver for an mp3 player was not found.

  Any pointers would be greatly appreciated. Thank you in advance if you're able to point me in the right direction on this one.

  PS. I found this entry.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/access-denied-setting-owner-andor-permissions-on/71cdd66a-75Ce-4E79-BACE-89637e0dacae

  So I went in regedit as admins and looked over my permissions for the local computer. I am an administrator and full permissions for the registry entries. I see that the key of vmware isn't there and this would confirm that I wasn't able to write the registry key in the installation process. So it seems quite as my user is blocked update registry entries for a reason any.

  PPS. I've logged on username administrator and also tried installing vmware player and received the same message. So not even administrator has the ability to write to the registry for the moment. ?? very strange.

  Best regards

  Peter

  If you still get the problem of the erratically during the installation with elevated privileges, I would advise you all to first uninstall any partial installation of vmware/privateinternetaccess programs using the Revo uninstall utility.  The program comes in freeware or professional and freeware is not a "paralyzed" piece of software. The software quickly and completely uninstall the software that won't leave your computer and will catch installs partial which do not arise with the traditional programs and feature, uninstall native utility Windows.

  Professional and Revo Uninstaller Freeware

  When your system was purified of any previous attempts installation, perform a clean boot to prevent outside process interfere with the installation process.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  This will start Windows conventional (i.e. not safe boot) and allow you to install the software. If you restart the installation process using run as administrator , I suspect you will have success.

• Remote access server problem ASA5510

  Hello guys,.

  I have a problem with ASA5510 configured as a remote access server. We use the client VPN in Windows XP. Look at the requirements I see no problem, but when I try to connect to the server it doesn't open the negotiation of VPN. I had the problem like this before, but at least I saw the traffic hitting the ASA. Now, I don't see anything hitting the device. I enclose the current configuration of the SAA. The VPN client on my laptop is configured correctly. Thank you in advance!

  RVR

  Hello

  Happy to help and thanks for the note.

  This command is not required, but 90% of deployment I've seen has this configured command and is the default value for the SAA. In a Word, what this command is open to IKE and IPSEC ports and also does not check ACL entering ASA for IPSEC traffic.

  In case if you do not have this command enabled, you must configure inbound ACL to allow IKE, IPSEC and text clear remote access VPN traffic after IPSEC packets get decrypted on the SAA.

  Kind regards

  Arul

  * Rate pls if it helps *.

• IOS VPN on 7200 12.3.1 and access-list problem

  I'm in IOS 12.3 (1) a 7200 and have configured it for VPN access. I use the Cisco VPN client. Wonder if someone has encountered the following problem, and if there is a fix.

  The external interface has the access-list standard applied that blocks incoming traffic. One of the rules is to block the IPs private, not routable, such as the 10.0.0.0 concern, for example.

  When I set my VPN connection, none of my packets get routed and I noticed that outside access list interface blocks the traffic. When I connect to the router through VPN, the router attributes to the client an IP address from a pool of the VPN as 10.1.1.0/24. But normal outside the access list denies this traffic as it should. But as soon as I have established a VPN connect, it seems that my encrypted VPN traffic must ignore the external interface access list.

  If I change my external access list to allow traffic from source address 10.1.1.0/24 my VPN traffic goes through correctly, but this goes against the application to have an outdoor access list that denies such traffic and have a VPN.

  Anyone else seen this problem or can recommend a software patch or version of IOS which works correctly?

  Thank you

  R

  That's how IOS has always worked, no way around it.

  The reasoning is to do with the internal routing on the router. Basically an encrypted packet inherits from the interface and initially past control of ACL as an encrypted packet. Then expelled the crypto engine and decrypted, so we now have this sitting pouch in the cryptographic engine part of the router. What do we with her now, keeping in mind users may want political route she is also, might want to exercise, qos, etc. etc. For this reason, the package is basically delivered on the external interface and running through everything, once again, this time as a decrypted packet. If the package hits the ACL twice, once encrypted and clear once.

  Your external ACL shall include the non encrypted and encrypted form of the package.

  Now, if you're afraid that people can then simply spoof packets to come from 10.1.1.0 and they will be allowed through your router, bzzzt, wrong. The first thing that the router checks when it receives a packet on an interface with a card encryption applied is that if the package needs to be encrypted, it is from his crypto ACL and its IP pools. If he receives a decrypted packet when it knows that it must have been encrypted, it will drop the package immediately and a flag a syslog something as "received the decrypted packet when it should have been."

  You can check on the old bug on this here:

  http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BugID=CSCdz54626&submit=search

  and take note of the section of the security implications, you may need to slightly modify your configuration.

• card crypto access lists / problem if more than one entry?

  Access list for IPSec enabled traffic.

  I've been recently setting up a VPN between two sites and I came across the following problem:

  I wanted to install a VPN that only 2 posts from site A to site B, a class C network

  So I created a list of access as follows:

  access-list 101 permit IP 192.168.0.1 host 192.168.1.0 0.0.0.255

  access-list 101 permit IP 192.168.0.2 host 192.168.1.0 0.0.0.255

  When I applied the access list above to map (match address 101) encryption, I quickly realized that only the first host (192.168.0.1) was successfully encrypted beeing while the other could not. I've been geeting on ipsec debugging errors saying that traffic to 192.168.0.2 denyed by the access list.

  When I changed the access list above with the following

  access-list 101 permit IP 192.168.0.1 0.0.0.255 192.168.1.0 0.0.0.255

  two items of work could successfully encrypted through IPSec tunnel.

  To look further into it, I realized that only the first entry of the IPsec access list has been really tested for the corresponding traffic!

  Is this a normal behavior or a known Bug? No work around for this problem?

  Kind regards.

  If you have ipsec-manual crypto map in crypto ACL, you can specify that an ACE. Check 12.2 docs:

  Access lists for labelled as ipsec-manual crypto map entries are limited to a single permit entry and the following entries are ignored. In other words, the security associations established by this particular entry card crypto are only for a single data stream. To be able to support several manually created security for different types of traffic associations, define multiple crypto access lists and then apply each a separate entrance card crypto ipsec-manual. Each access list should include a statement to define which traffic to protect.

• Please help, unidentified network, Internet access without problem...

  Hello world...

  I have a Toshiba Satellite C850 performer windows 8 64-bit, and it was working fine, suddenly the wifi doesn't connect now and said internet access, when I press on troubleshoot it says "wifi is not a valid IP configuration", and also tried to connect through a LAN cable, it does not either, but other laptops and mobile phones perfectly connects to the network It happened after I installed Skype. !!! I know it's a coincidence, but thought I should say...

  I tried to disable the two network adapters, forget network then connection, tried to remove the 'Hello' in the firewall, but I was not even have Hello... I'm going crazy with her...

  I tried to disable the firewall, anti-virus uninstall, I got avast, I tried to disable IPv6.

  tried these commands cmd

  netsh winsock reset catalog

  netsh int ip reset reset.log hit

  ipconfig/flushdns

  He said

  «"«reset the interface...»»» Ok!
  "something that I don't remember now" reset OK!
  reset failed
  Access is denied

  «' There is no user specified parameters to be re-armed»»»

  Although I chose command prompt (admin)...

  also tried

  ipconfig/release

  ipconfig/renew

  It was the result

  

  Although I was connected at this time...

  Tried another router wifi at home with my brother, with no other connected devices but this win8 one, didn't work either...

  Tried to boot into "Safe Mode with network" no longer works...

  I tried to uninstall the driver and install the last, also did not work,

  I also disabled the (avast NDSI firewall driver) and the (avast firewall driver), didn't work...

  This is the screenshot of the ipconfig/all command

  

  I tried to take the IP address and the subnet mask and default gateway and DNS servers, since a working laptop and enter manually on this laptop from win8 but did not work, but now there is no 'limited access and no yellow triangle', but still no internet connectivity...

  Here are a few screenshots:

  

  

  My network is the first...

  

  and ALL this applies for WiFi AND cable LAN, and also I tried to connect my Samsung galaxy phone and tried 3 G connect via it's also did not work, but it used to work before the problem 

  HEEEEEEEELP PLEEEEEEEEAAAAAAAAAASE...

  Hello

  Please contact Microsoft Community.

  We appreciate your efforts and the provision of information in detail about the issue. As you have already tried some troubleshooting and your computer still does not connect to the internet. I suggest you to consult the article below and check if it helps.

  How to refresh, reset or restore your PC;

  Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Important: refer to the section "restore your PC to an earlier point in time."

  Note: Try to restore your system to an earlier date when everything worked correctly.

  Meet us, then we can help you further.