WiFi doesn't work does not correctly and he always finds Request Timed Out

Similar Questions

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• 6TO4 ADAPT NETWORK ADAPTER DOESN'T WORK DOES NOT CORRECTLY AND MY DRIVER NVIDIA GEFORCE 7600 COULDNT UPDATE.

  MY LAPTOP PROBLEMS AS SPEED TO MARKET AND TOO SLOW, I'M LEFT TO CHECK THE DIAGNOSTIC TOOLS.IT PROUNE PERFORMANCE FOR ME THAT MY 6TO4 ADAPT IS NOT WORKING AS WELL AS MY PILOT TO UPDATE NVIDIA GEFORCE 7600 COULD NOT... URGENT... I THANK YOUR OBTAINED IF NO SOLUTION... A lot..

  1. you can update your graphics here driver (just answering questions). Download the appropriate file, run it, follow the instructions on the screen, reboot when you are prompted. Check to see if that helps with performance.
  2. http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The mouse scroll wheel doesn't work does not correctly?

  Win 7, Microsoft Wireless Mouse 5000
  Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

  Thanks in advance... Bob

  Hello

  1. have you checked if the problem occurs with a different mouse?
  2. don't you make changes on the computer before the show?

  
  You can try the steps provide in the supplied knowledge base articles and check if that helps:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   

• DB between 11.2.0.2 and 11.2.0.3 DBs version link doesn't work does not correctly

  Remote schema in 11.2.0.3 DB
  
  
  In 11.2.0.2 DB, I created a link pointing to a diagram in a DB 11.2.0.3 DB
  

  -- Used the new 11.2 syntax (similar to easy connect )
  
  SQL > CREATE DATABASE LINK dropLater CONNECT TO SCOTT IDENTIFIED BY SCOTT_123 USING 'blpclst-scan.ap.haster.com:3587/SNPG_AP.ap.haster.com';
  
  Database link created.
  
  SQL > select count(*) from ind_names@dropLater;
  select count(*) from ind_names@dropLater
                       *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  ORA-02063: preceding line from DROPLATER
  
  
  
  -- But the Sysdate from dual test is working fine
  
  SQL > select sysdate from dual@DROPLATER;
  
  SYSDATE
  --------------------
  21 Nov 2012 13:24:29

  IND_NAMES Table exists in the remote schema SCOTT. Anyone faced a similair with DB links problem?
  
  I think that this problem is due to the difference in version (11.2.0.2 to 11.2.0.3)

  Hello

  I don't think that the other version is giving the problem.

  It seems that the SCOTT user doesn't have access to this table in the remote database.
  It seems odd if you say that the IND_NAMES table doesn't exist in the remote schema SCOTT.

  Could you run the following statements and see the objects owned by the user SCOTT in remote db?

  SELECT * FROM user_objects@droplater;
  

  If the table exists in the remote schema SCOTT should appear in the output among other objects belonged schema SCOTT.

  Kind regards.
  Al

  Published by: Alberto Faenza on 21 November 2012 14:55

• FF12 and 13 spell check doesn't work does not correctly

  Most of the time, the spell check does not work as it should. I get homesick menu when I right click on a word bad spelled for suggestions. This is the menu I receive.

  http://i273.Photobucket.com/albums/jj216/Moonbarker/DSCN2437.jpg

  Sometimes, I get the list of suggestions, but most of the time, this is the menu I receive. This happens on all websites where there is an area where the spell checker can detect misspelled words. This happened since I updated to Firefox 12. I hope that the update to FF13 would fix it, but it didn't

  Normally, you get this menu if you do right click on the word, but on the text field that surrounds the word.

  You can try to reset Firefox and see if that helps in this regard. Refresh Firefox – reset the parameters and modules

• Jumping cursor, sporadic and touchpad doesn't work does not correctly for HP envy 15

  Hello

  I had my HP ENVY 15 t-q100 CTO Notebook PC in September 2014. It has 8.1, 64-bit Windows. For the first few weeks of use, I don't have any problems. Then, I started having occurrences more problems of cursor/touchpad to the point where it happens all the hours of use (not a problem of external mouse):

  Jump around on the screen (a few millimeters in inches).

  Move per increment on its own without me anywhere near the laptop (usually spazzes left).

  Does not allow scrolling functions / normal touchpad when problems are happening.

  Works as if I am holding down the click button while I try to move it - mostly frustrating when I make the important work.

  At random click things that I try to move it.

  Here's what I tried to do to fix this and did not work:

  Roll back the driver (did not work).

  Update driver (no update available).

  Reset the device (works for a minute or two).

  Reboot (I do it everyday anyway).

  Reduce the speed of the cursor and other mouse options offered online.

  I've seen similar problems for the HP Envy 17 and other laptops, but no real solutions have been proposed. Please help me with this problem.

  In January 2015, I received by mail, a brand new Envy 15 t-q100 purchased HP's official website. Packaging and the laptop is here Mint (aesthetically speaking). That being said, I had the exact symptoms described in this thread since the first day. With a replacing synaptics driver, I was able to stabilize the mouse enough to effectively use the tool 'curve of pressure. " Then, I determined that it was in fact a hardware problem. I noticed that from time to time, the "animation" icon would indicate that pressure is applied even if I wasn't touching the laptop. If I applied pressure by pressing or stirring on the basis of the Palm, would stop the pressure indication and use mouse returns to normal. However, this problem gradually went from bad to worse, and finally the touchpad does not have all together. Firmware and BIOS flashing helped before, but has been either nothing change.  I debated on referring to HP for repairs under warranty, but after having to wait a month to get this unit in the first place, in addition to reading all these horror stories of people coming back a semi destroyed unity and always faced with the same symptoms, I was ready to fight against myself. so, I found a source replacement nine track want pads 'zone of control '. Ninety-nine percent sure that I had a defective keypad, I bought P/N "761210-001" to "parts_direct101" for $59.95 ebay seller. Disassembly, I discovered that one of the screw mount for the pad was loose (this may have contributed to the problem). I decided to replace the pad in any case. Finally. No more glitches. After months of experimentation and reading these forums, I have now a mouse working 100%! It's been more than 2 weeks now, since I replaced the touch pad and still no problems! I use my laptop 3-4 hours per day. I always use the synaptics driver installed replacement from "dpinst.exe" found in the x 64 folder downloaded directly on the website of synaptics 'uncompressed'. I have not tried to update with windows update again. Just happy to finally have a mouse to work on this beast of a machine. I'll keep you all posted if this problem will never return. With regard to the absence being automated support generic responses to "Customer Service" aka HP, I guess HP has accidentally put on a bad batch of caterpillars and they simply cannot 'afford' parts, labour and logistics to issue a notice of recall of this magnitude! Unfortunately, this laptop must be completely disassembled to replace the touchpad. I would NOT recommend this fix if you feel that it is beyond your skill level. Instead, call the HP technical support and insist that you have received a unit with a defective keypad. I hope this helps!

• The home of the iphone 5 s screen button doesn't work does not correctly

  Home screen (middle button) does not work smoothly. Sometimes, it works very well and sometimes it doesn't. Someone might suggest it is a hardware or software problem that must do to solve this problem

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo.

  Also updated software iOS 10.1 over your WiFi

  See you soon

  Brian

• Caps lock key doesn't work does not correctly. New computer.

  My shift key does not work correctly. Sometimes it works, sometimes it doesn't. I push on it is difficult to ensure that it works. But used in a standard keyboard, it is a problem because I don't bang the keys. I have to keep retype phrases due to errors that it creates.

  Its a shame because my computer is new. In fact, within a month, it is the second time I have to look at the service center. First time because the memory of my computer showed I consumed 40 GB without even having saved/downloaded a single file/document. The repair center did not have an answer and reformat the computer. This problem has been resolved.

  Was so much happier with my Dell computer. Nothing fancy, but no problem.

  I have the same problem. the button is enabled as soon as the second or even third. you don't want to, but you have to take it back in service. Maybe it's a factory default.

• Yahoo Mail doesn't work does not correctly

  I have the latest version of Firefox, which is OK and an older version that has problems with Yahoo Mail as well.

  Firefox 3.6.12 used to work with Yahoo Mail, but no more so there must be Yahoo which is something wrong and I do NOT put to level anything on this old laptop!

  Yahoo Mail simply does not work right. I try a NEW mail and there is no message body. Look at a mail only shows the header. IE 6 still works, but ILS (Yahoo) says that I need to improve - NOT!

  I have a newer netbook with VISTA (ARGHHHH!) and Firefox 7.0.1 and everything works except for a few glitches in the Add-ons.

  I'm seriously sick of UPDATES that don't work right! My netbook has had three versions of Firefox and other improvements for VISTA and things just work. And my laptop... too old for the new; Windows XP and VISTA or Win7 worked are the SHIT! And now that Apple ripped the heart of Motorola and Intel and Windows compatibility-highlight... ARGHHHH!

  Hi, Caltrop, based on what I read, I have a similar problem. Can you elaborate on what you have done to remedy this? I consider myself a technophile junior but was not able to decipher what you were saying. Perhaps to explain as I am a child could help make it easier for me to see your step by step resolution. THX!

  After checking my addons & plugins I noticed that I don't have this AdBlocker Plus, you speak of. Does make a difference in correcting mistakes?

• RALink RT3290 802.11bgn adapter Wi - Fi doesn't work does not correctly

  I bought a HP Pavilion TouchSmart with Ralink RT3290 802.11bgn Wi - Fi adapter. Everything worked fine until I can't say when it started really, I've had a few problems with my WiFi connection. I'm not really sure, but I have the feeling that it has been getting worse over time. Suddenly, the internet connection is lost. Troubleshooting gives me different results, most of the time that it is "the default gateway is not available." Sometimes it is fixed, sometimes not. I looked online, what could be the problem. Then I opened my device manager and checked the network card, unchecked "allow the computer to turn off this device...". ", but that did not help. Once the power management tab was not yet available. Sometimes, the card is disabled. Do not know why. Sometimes I can turn it on just by clicking on activate. This average doen't, that I have no internet, only that the adapter is enabled. Sometimes she even let me enable it.

  - And he dropped my internet connection again!

  Troubleshooting: 'the default gateway is not available"- fixed

  I've updated the WiFi card to the 5.0.37.0 version. Does not solve the problem.
  Sometimes my computer tells me that there are no available connections. But I know that there are plenty around.

  Someone help me please! I'm desperate!

  Thank you.

  Silke

  I think that my problem has never been with the WiFi adapter. A month ago, I went to Comcast (with 105 MB/s) to AT & T (with 18 Mbit/s). Since then, I didn't at all connectivity issues. And as incredible as it may seem my internet speed is the same, since the speed of Comcast almost never reached above 20 Mbps. If I would have known that sooner! Would have saved me hours or even days with internet connectivity and problems on the phone with the Comcast people!

  Thanks to everyone for their help and advice. Maybe my information can help others with the same questions.