DB Upgrade during the R12 upgrade approach

Similar Questions

• Node of collapse during the R12 upgrade

  Hi all
  
  I have a question regarding the collapse of one of our nodes of E-Business.
  
  Our current environment is 11.5.9.2. Web/forms are on one W2003 node and "everything else" is on since the HP - UX node. Due to changes in our business, we look at the whole of the application running on a node, our HP - UX server. Of course, we would like to test this out first to make sure that no problem of performance.
  
  My question: in the 11.5.9.2 > R12 upgrade process, you run rapidwiz. Rapidwiz ask you what components are on which node. I think it should be possible to remove our W2003 node during upgrade (process rapidwiz). Rapidwiz should create services http, etc. on HP - UX and we should be ok? Good or bad?
  
  Thank you all... colin

  Colin,

  You must move the components you have on Windows server to the node in HP - UX (as shown (Note: 238276.1 - migration to Linux with the Oracle Applications 11i version) before you start the upgrade that you already have files on the Windows node and install quickly running during the upgrade isn't enough.)

  I think that your approach is not supported, you can check with the support of Oracle.

  Note: Please make sure that you have enough resources on the computer from HP - UX and test the performance before proceeding with this plan.

  Kind regards
  Hussein

• Upgrade patches for 10.1.2.3 during the R12.1.3 upgrade

  Hello
  
  Need a clarification about 10.1.2.3 fixes over R12.1.1 to R12.1.3 upgrade
  
  I'm following the Oracle E-Business Suite Release 12.1.3 note 1080973.1 Readme and applying patches "forms and reports Oracle E-Business Suite Release 12 . Document 437878.1 "
  
  I'm unclear if I apply the Patch 8919489 - R12. T2K. B.Delta.3 before applying other one-off patches, this patch seems to be included in R12.1.3 and I apply these patches to upgrade R12.1.13
  
  Thank you

  My question was out of the patches in the table, is 10.1.2.3 9593176 patch only which applies to the R12.1.3?

  Not only 12.1.3. It can be applied to any instance of R12 circulating 10.1.2.3

  Thank you
  Hussein

• Questions on "configure and start the server process" step during the r12 upgrade

  There is a not listed in the 11i 12.1.1 to upgrade guide, 'the Server Configure and start processes. It looks like to includes two parts, run autoconfig tire to the database and run the quick installation of second time.

  so I have two questions here:

  1. looks like the quick second installation is just autoconfig, so can I just run autoconfig instead of the second quick installation?

  2. that we'll first? automatic configuration in the database or quick installation service?

  Thank you

  1. looks like the quick second installation is just autoconfig, so can I just run autoconfig instead of the second quick installation?

  AutoConfig will not start the services so I'd run fast install and it should run the automatic configuration for you.

  2. that we'll first? automatic configuration in the database or quick installation service?

  Quick installation.

  Thank you

  Hussein

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Why firefox fails during the upgrade?

  I have been using FF for several years. Three or 4 times during the process to upgrade FF loses open tabs and only load with a single tab (it's all right I can reopen). So, I waited for the next version 'stable' and then tried again until this successful.

  I am running 19.0.2. The problem is that the upgrade creates two title bars (good name? At the top of the brower... which shows the title of the current page) and just generally looks like if effed-up top and icons are stripped, etc..

  I searched: can someone direct me to the help page which addresses this problem.

  Thank you!
  SP3 for Windows XP, 2 GB of Ram

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• What should I stop time machine during the upgrade at El Captian?

  Do I have to stop the machine in time during the upgrade to El captain?

  N °

  Make sure that your Mac meets the requirements > update of OS X El Capitan

• Failure during the upgrade to El captain

  Hello

  Trier just to run the El captain of my Mac Book Pro late 2008, 500GB, 4 GB upgrade Yosemity.

  After several attempts, I have to capitulate.

  The Message is that the absence during the installation and the options are retry and save the log file.

  Before the upgrade, it worked very well with all the problems.

  Have been looking for solutions and I do not know if the recovery online could help me!

  I don't have a lot of work put in Photo I am very interested with a recovey that saves my work...

  (Yes, I was to stupid to do a backup before the upgrade)

  Any chance of recovering the contents of my HD

  Allan continues

  This could be a missing file that had not resulted in anything until an update.  I had to save and clean install the operating system. I had a similar problem and take mine to the Apple Store to be fixed, it turns out was a broken HD support, who can apparently cause this problem.  You must back up either with Time Machine or external plug your hard drive to another computer and copy the files you want to save. (TimeCapsule is easier), then take it in to be looked at, they can run Diagnostics on the Apple Store.

  See you soon,.

  Adam

• Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  You chose the option in iTunes to download the firmware first and install it in a second time after that?

• Protection of the projects during the upgrade of the Lion in Yosemite

  Hello world!  Does anyone know how to protect themselves from projects during the upgrade of the Lion to the operating system of Yosemite?  I heard shops of the horror of people the upgrade of an operating system to another and then having to rebuild their projects in the new operating system and I want to avoid if I can.  If there is no way to do so, any ideas on the record of ongoing projects would be greatly appreciated.  I have been turned off of this update forever and you have to do as soon as POSSIBLE.  I'm currently under OS X 10.9.5 and FCPX 10.1.4.  Thank you!

  10.9.5 are Mavericks. Could indicate you these horror stories? They may contain information that is largely obsolete. You want to check any third-party software and plugins to make sure they are compatible with the latest operating system.

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• UNMOUNTABLE_BOOT_VOLUME during the upgrade to Windows 7 from Windows Vista

  I'm getting an unmountable_boot_volume during the upgrade to Windows 7 from Windows Vista.  It occurs after Windows 7 software loads and restarts.  If I restart the computer, I have the option to start the upgrade to Windows 7 or Windows Vista.  If I select Windows Vista, the computer restarts without problem.  If I choose Windows 7 Upgrade, I get the blue screen of death with the unmountable_boot_volume error.  Of course, nothing wrong with the boot volume because Windows Vista starts without error.  The boot drive is 1.5 TB.  Any suggestions on how to accomplish the upgrade to Windows 7?

  Windows Update has nothing to do with the upgrade of Windows. Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• Computer froze during the upgrade/installation of windows xp

  I have windows xp home edition on a Dell desktop computer. I had problems with the computer freezing and then lost the connection to the internet 3 days ago. So I decided to reinstall windows xp from cd. However, I have chosen upgrade, rather than new install (because it was the suggested method). Now my computer will not complete the upgrade but is frozen during the installation. It remains to 32 minutes until the end. I can't seem to start, can't control/alt/delete or whatever it is. If I unplug my computer and launch it then again once, it resumes where it left off. How can I break out of this loop and start over with a fresh install? Thank you.

  OK, it would have been better to have all the information on this machine in one place. I guess your question in the other post you made about activation is for the same computer? If this is correct, then the information I gave you in your previous post is not applicable.

  With Dell computers, using Dell reinstallation media, you don't need to enter a product key during installation and the operating system is already activated.

  If you use a different XP installation disc that was not provided by Dell, this is why you are experiencing activation problems. If you do not have a Dell brand installation CD, you will need to use a manufacturer OEM generic system disk and use the product key on the label of CA certificate on your computer. If you use a copy of XP retail, you would use the product key on the CD to copy the retail case. In the case of the generic OEM drive, it must be the same version of XP that came with your computer (Home/Pro/MCE).

  All that being said, your sound of questions as a material. Did you leave all devices attached during the repair facility? If so, this can also cause the problem. Unplug everything except (obviously) your mouse and your keyboard when doing an operating system install. You should ensure that the material is solid before attempting to install again.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Understand that all your data will be lost. If you save before, try to start with Linux Livecd such as Knoppix and copy the files to an external hard drive. Then download a utility from drive to drive mftr site. or use a third-party (Acronis Disk Director, Knoppix gparted) start Disk Manager to delete partitions on your hard drive and format the drive.

  Now, do a clean install of Windows, preferably using a Dell XP installation CD. Install Dell drivers for all your hardware when you're done, restore data from backups. MS - MVP - Elephant Boy computers - don't panic!

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.