dbms_job question...

Similar Questions

• dbms_job questions

  Hi all..
  
  Please help with dbms_job questions.
  
  Oracle version: 9i
  
  say, if I get a job with the following times
  next_date = trunc (sysdate) + 1/24-> saying that it starts at 01:00
  range = trunc (sysdate) + 1/24-> saying that it runs every day at 01:00
  
  (1) what happens if the job takes more than 24 hours to complete?
  When it start again? According to the schedule, we say that it starts at 01:00
  but the current run up to the race?
  
  
  (2) if my job_queue_process = 10 (means run only 10 jobs at a time).
  In this scenario, if there are already 10 jobs at 01:00.
  my work took me from 01:00 be taken up.
  When it starts to this scenario? What happened to 'run '?
  
  (3) other use of dbms_schduler (using channels in the Task Scheduler), is possible to
  do the following?
  If I have 4 jobs 1,2,3,4. I would like to run Task 4 only after job 1,2,3 had finished.
  using any dbms_alert or dbms_ * etc.?
  
  Please help me.
  
  Thanks in advance

  First, I am assuming that you intend INTERVAL trunc (sysdate + 1) + 1/24. Otherwise, the INTERVAL did not assess for tomorrow at 01:00.

  (1) the INTERVAL is evaluated once the work is completed. So if work begins at 01:00 on 1 January and ends at 02:00 on Jan 2, the INTERVAL would be assessed at 02:00 on Jan 2 and go back to 01:00 on 3 Jan. The work would go to 01:00 Jan 3, so 2 Jan run might be ignored.

  (2) the task will run as soon as one of the 10 jobs running ends (assuming that there is no other jobs are put on hold and waiting to run upward).

  (3) is it possible? Sure. You must write custom code. The simplest approach would be to create a table of simple state with 4 rows, one by mail. Jobs 1-3 update the state table when they are complete and 4 job is configured to run every few minutes, query the data in the table and only work if she sees that 1-3 posts were all successful. When work 4, he then clears the data in the status table.

  Justin

• Discoverer and planning problem

  Here is my Configuration:
  OracleBI Discoverer 10g (10.1.2.3)
  Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
  Discoverer of model - 10.1.2.55.26
  Discoverer Server - 10.1.2.55.26
  End user layer - 5.1.1.0.0.0
  End user layer Library - 10.1.2.55.26
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  Copyright © 1999, 2005, Oracle. All rights reserved.
  
  
  First of all, Disco scheduling and more works very well in our production instance. In the case of our test, I have a user who wants to plan cabinets at any time where a new folder is tested. My problem is that when I'm on the second stage of the Scheduling Assistant and I select immediate (or manually place once in it's very soon for example (5 minutes from now)), the workbook took hours yesterday to show 'regular' in the tool «Managed workbooks» regular
  Today, it works very well and runs immediately. I created a very simple workbook titled, "scheduling test", which has a column, a calculation which is the sysdate value. I started to test this yesterday.
  
  Is - any thoughts on what is causing this trouble?
  
  I did the following:
  1. I've noticed that a package is created in the scheme of planning for the workbook on demand.
  2. I tried to interview for scheduled tasks, created by dbms_job (questioned Dba_Jobs using the system account and did not work... neither yesterday nor today).
  3. I tried to query v$ sql with the intention to see when the package, batch_rep_secure.submit_job, is run... but don't put find regular reports.
  4. I tried to glean information from the tool to 'Manage workbooks on demand' with the administrator of Disco, and the duration column is null (yesterday).
  5. I got our dba search the file init < sid > .ora and confirmed that the job_queue_processes have been set to 10.
  
  To remedy this, yesterday, I just manually executed the package, EUL5_BATCH_PACKAGE10061409140713, and shortly after, the regular workbook would have a new table associated with that is consumable by Disco more.
  
  My hunch is that our work queue has been saved significantly yesterday and it was delay the planning and execution of regular exercise books.
  
  Do any have ideas on what the root cause was here and how can I confirm this?
  
  
  Thank you
  
  Patrick

  Hi Patrick
  It would be too my intuition. You can also consult the database of the tp privileges each user. Here is what I use:

  accept prompt'Enter username username: '
  accept pword prompt'Enter password: '
  create user & username identified by & password;
  Grant connect, resources to & username;
  grant analyze everything to & username;
  grant create procedure, create the sequence of & username;
  Grant create session, create the table in order to create & username;
  Grant execute any procedure to & username;
  grant global query rewrite in & username;
  grant select any table, unlimited tablespace to & username;
  Grant execute on sys.dbms_job of & username;
  Grant select on sys.v_$ parameter of & username;

  Best wishes
  Michael

• Question about dbms_job...

  Hi all..
  
  Oracle Version: 9i
  
  Is it all that trouble I do?
  I am stable and submit a self-employment.
  It does not show in the table dba_jobs, but it is not executed. I have a journal table, if the process is running that the log table will get some messages.
  But I see not all records in the log table.
  
  

  declare
    v_begdate date;
    v_enddate date;
    v_varchar varchar2(2000);
    vjob      number;
  begin
    v_begdate := add_months(trunc(sysdate) - 1, - (0 + 1) * 1) + 1;
    v_enddate := add_months(trunc(sysdate) - 1, -0 * 1);
    v_varchar := 'begin VPS_VARIANCE_DISPOSITION_0912.do_viol(' || '''' ||
                 v_begdate || '''' || ',' || '''' || v_enddate || '''' ||
                 '); commit; end;';
    dbms_job.submit(vjob, v_varchar, sysdate + 5 / 1440);
    dbms_output.put_line(v_varchar);
    dbms_output.put_line(vjob);
    commit;
  end;

  Yes, that's the reason. Job_queue_processes specifies the number of jobs that can run at any point in time - if that is set to 0, the task is created, but it will never actually run. You (or your DBA) should be increased this setting in order for the jobs start running.

  Justin

• Monitoring DBMS_JOBS status

  Hi all
  
  I have Oracle 11 GR 2 on windows 2008 server R2 64 bit version.
  its my environment.i of development gave to create, delete, modify dbms_jobs to other users, when I check in user_jobs some body changed last_date column...
  So question here is I want to know who changed the column?
  1. do we have any what display where we can verify and meet this change?
  2.i have trace enabled in my database. but I do not know what file trace should I check?
  3 and if I want to follow this, how is it possible?
  
  Thank you and best regards,
  Vikash Jain (Junior DBA)

  As said sangare values will change if the task is completed successfully.

  You can see who ran that work by querying the view user_jobs;

  If auditing is enabled, then you can query

  SQL > SELECT user name, owner, obj_name, action, timestamp FROM dba_audit_trail;

  to display the user who performed the action on the database.

  If you want to learn more about the audit through the link below

  http://www.Oracle.com/technetwork/database/Audit-Vault/learnmore/TWP-security-auditperformance-166655.PDF

• dbms_job error

  Hello
  
  I'm new to the development of oracle.
  
  Environment: Oracle 10g R2
  
  My needs: I need to schedule a task to run a PACKAGE every 4 months.
  
  My code:
  
  
  DECLARE
  X NUMBER;
  BEGIN
  SYS. DBMS_JOB. Send
  (
  jobs = > X
  , this = > ' TRANSACTION. TRANS_ARCHIVE_PKG;' -name of the package you want to run
  , next_date = > to_date (May 10, 2011 11:35:51 ',' dd/mm/yyyy hh24:mi:ss')
  , interval = > 'TRUNC(SYSDATE+120) '.
  , no_parse = > FALSE
  );
  SYS. DBMS_OUTPUT. Put_line (' job number is: ' | to_char (X));
  COMMIT;
  END;
  /
  
  
  Errors:
  
  ORA-06550: line 1, column 93:
  PLS-00221: 'TRANS_ARCHIVE_PKG' is not a procedure or is not defined
  ORA-06550: line 1, column 93:
  PL/SQL: Statement ignored
  ORA-06512: at "SYS." Dbms_job", line 82
  ORA-06512: at "SYS." Dbms_job", line 139
  ORA-06512: at line 4 level
  
  My Question:
  
  What is wrong with my code?
  Cant plan us a package using dbms_job? Am I missing something?
  Is this the right way... or can you offer me another way for my requirement.
  
  My requirement is to schedule a task to run a package every 4 months.
  
  
  Thanks in advance.

  user13517642 wrote:
  ... My needs: I need to schedule a task to run a PACKAGE every 4 months.

  What do you mean by "run a PACKAGE?
  I know how to pronounce many words, including the words that appear in a book, but I don't know how to "pronounce a book."
  I know how to run procedures, including procedures in a package, but I do not know how to "run a package.

  ... Errors:...
  PLS-00221: 'TRANS_ARCHIVE_PKG' is not a procedure...

  The error message is more or less the same conclusion. You call a specific proceudre.
  You package contains 5 procedures, and you want to run all 5? Write a 6th procedure in the same package, calling the 5 original, then call this procedure 6th in the work.

  Consider using DBMS_SCHEDULER instead of DBMS_JOB.

  120 is not quite the same as 4 months. For example, 120 days from today (May 3) is August 31. August being only 3 months after may, which could confuse people. For the work to be performed on the same day of the month, every 4 months, use:

  ,interval => 'ADD_MONTHS (TRUNC(SYSDATE), 4)'
  

• Question about JOB_QUEUE_PROCESSES

  DB version: 10.2.0.4
  Operating system: Solaris
  
  Question * 1 *.
  
  If a DBMS_JOB x is running and if the value

  ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 0 ;

  This will not affect the work running x. You just can't run any DBMS_JOB job more in the future. Right?
  
  
  
  Question * 2 *.
  
  In version 10.2, JOB_QUEUE_PROCESSES definition has no effect on DBMS_SCHEDULER. But workplace 11.2 JOB_QUEUE_PROCESSES affect both
  Dbms_job and DBMS_SCHEDULER. Am I wrong?

  1. set job_queue_processes 0 will not stop a running job.

  2 Ronald Rood has a writeup in the various implications job_queue_processes here:
  http://ronr.blogspot.com/2009/09/jobqueueprocesses-and-dbmsscheduler.html

• Question on schedule jobs

  Hello
  I created two varients of employment as described belo.
  
  1)
  
  DECLARE
  X NUMBER;
  BEGIN
  SYS. DBMS_JOB. Send
  (work = > X - name of task as 'X')
  , this = > 'DEL_EMPLOYEE_TABLE;' - STI has STORED PROCEDURE
  , next_date = > to_date (May 19, 2009 01:00 ',' dd/mm/yyyy hh24:mi:ss')
  , interval = > ' trunc (sysdate) + 1/24 1'.
  , no_parse = > TRUE
  );
  SYS. DBMS_OUTPUT. Put_line (' job number is: ' | to_char (x));
  END;
  
  2)
  
  Start
  () dbms_scheduler.create_job
  job_name = > 'DEL_EMPLOYEE_TABLE ',.
  job_type = > 'procedure_stockee ',.
  job_action = > 'DEL_EMPLOYEE_TABLE ',.
  number_of_arguments = > 0,
  start_date = > SYSTIMESTAMP,
  repeat_interval = > ' FREQ = DAILY; BYHOUR = 0; BYMINUTE = 0; BYSECOND = 0',
  End_date = > NULL,
  enabled = > TRUE,
  Comments = > 'Old records EMPLOYΙ delete');
  end;
  
  
  I have the following questions
  
  (1) what is the difference between #1 and #2
  (2) when I questioned the DB with this query, I could see only
  
  Select the owner, job_name, State of dba_scheduler_jobs
  
  I saw only
  
  "DEL_EMPLOYEE_TABLE" - employment but do not see the work #1 sub - X

  SQL> DECLARE
    2    X NUMBER;
    3  BEGIN
    4    SYS.DBMS_JOB.SUBMIT
    5      ( job       => X
    6       ,what      => 'DEL_EMPLOYEE_TABLE;'
    7        ,next_date => to_date('19/05/2009 01:00:00','dd/mm/yyyy hh24:mi:ss')
    8        ,interval  => 'trunc(sysdate) + 1/24 + 1'
    9        ,no_parse  => TRUE
   10       );
   11     SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
   12   END;
   13   /
  Job Number is: 46
  
  PL/SQL procedure successfully completed.
  
  SQL> exec dbms_job.remove(46)
  
  PL/SQL procedure successfully completed.
  
  SQL> select job, what from user_jobs;
  
  no rows selected
  

  Max
  http://oracleitalia.WordPress.com

• work using DBMS_JOB schedule. SUBMIT()

  Hi people I HAV esubmitted using DBMS_JOB jobs. Submit() package. I put the time, it should work after 5 minutes since I have created.but now my question is how do we know that this work was performed within the specified interval. am using oracle 9i.please suggest me.
  
  Concerning
  VIDS

  You should refer to DBA_JOBS and DBA_JOBS_RUNNING views to get information on your work
  Please refer to the following address for more information on these views

  http://pandazen.WordPress.com/2007/12/19/Oracle-job-to-be-continued/

  - - - - - - - - - - - - - - - - - - - - -
  Kamran Agayev a. (10g OCP)
  http://kamranagayev.WordPress.com

• iOS 10 people record problem/question

  Hello

  I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is coming from white.

  Hi JohnP007,

  Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.
  

  Difficulty faces and names mixed-up

  If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.

  1. Tap the person you want to remove in the album of people > select.
  2. Type Show done face to emphasize his face in every photo.
  3. Press on each photo that is not the person.
  4. Type > not this person.

  Hide people

  You can hide the people or groups that you don't want in your album of people.

  1. Open the album people and press Select.
  2. Touch the people you don't want to see.
  3. Click Hide.

  If you want to see the people that you have hidden, press on show hidden people.

  People in the Photos on your iPhone, iPad or iPod touch

  This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.

• Questions - and answers forgotten

  How to get my 'secret' answers to the questions that I have noted the way back when?

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• I can't reset the security questions. We received notice as below:

  Hello world

  I can't reset the security questions. We received notice as below:

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  Please help me as soon as possible! Thank you very much.

  Hello

  You will need to contact the Apple Support.

  The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for you - this is a user-based community).

• Question of cloning for SSD upgrade on 12 Macbook Pro

  Previously, I did an upgrade to SSD on my Macbook Air to 2012 according to the instructions of JetDrive transcend. Basically connection via USB 3 and using Mac OS X to clear (and format) disc utilities new SSD, then restore again SSD and then remove the original 128 GB SSD and insert the new 480 GB SSD.  For about a month and so far without problem.

  Now I'm trying to 2012 Macbook upgrade my Pro partner (on 10.11.6).  I got a Crucial SSD MX300 to replace his HARD drive.  Crucial comes with (or recommend) Acronis software.  And a lot of the messages of the forum recommend Carbon Copy Clone.

  My question is if I can use the same method for the cloning of the HD as my Macbook Air (just restore disk of Mac OS X utilities)?  This time, I'm upgrading HARD drive and I don't know if something is different.  At the same time, if I got lucky the first time, I don't not ruin Macbook Pro my spouse this time.

  Thank you.

  Yes, you can use disk utility to clone your MBP wives, but unlike CCC, it will not clone the recovery and Partition.

• Question about resolution movie downloads

  If I buy a movie at a certain resolution (780p for example), but I want more later re - download at a higher or lower resolution (SD or 1080 p), can I do so and how?

  Same question perhaps for music. Some of my songs have been bought before the latest Apple codecs.

  Any help is appreciated!

  THX!

  Once you have made a purchase on the iTunes store, you will see your purchased items in the menu under accounts bar > bought. You can simply select the item purchased and re-upload.

  With regard to the resolution of the film for films that are offered, and you select the resolution, you can download it again and select a different resolution. For movies that are available as separate download to SD, 780, or 1080 points, you would be limited to the original resolution you selected.

• Why I can't ask questions.

  I just have a question.  I said that I can't ask questions.

  Do exactly what you did to make this post, but your question in there instead.