DC 7700 with e3400 celeon?

Similar Questions

• DC 7700 with celeron e3400?

  I want to know IFF a celeron e3400 dual core works on this hp dc7700sff, I updated the bios from 2009 and 2010 thanks microcode was last updated

  Hello

  stafiejulien wrote:

  I want to know IFF a celeron e3400 dual core works on this hp dc7700sff, I updated the bios from 2009 and 2010 thanks microcode was last updated

  The easiest way to see what's inside is to download and run CPU-z.  The utility will tell you what feeds your PC.

  Best regards
  ERICO

• have I not a ghost? PC turned off by itself and restarts when playing flash games...

  Hi, have a hp dc 7700 with a DC 7700 SFF USDT Board in it, 4 gig of ram, 750 GB HD, xp pro, 32-bit, windows just recently began to shut down the pc and restart on its own only when playing farmville, (flash game)... really weird... what I did > I did a full virus scan with advest & malware a few threats found and deleted, has done a chkdsk on it, performed a restore to an earlier date, have always the same problem... ran JRT and no threat not found, has anyone seen this before?  other that farmville, there is no other problems with it, my other dc7700 cmt have no problem when you farmville... duty to solve this problem, the pc of the wife...

  old_geekster wrote:

  Boatmoter, welcome to the forum.

  Have you checked to see if the computer is overheating all in game.  Games is intense and can cause a heat.  This can certainly cause the computer to reboot unexpectedly.  There are many FREE programs that you can use to check the time.

  Thanks for the tip I will load CPUZ and check the temperature which would be the specs of temp on this one

  old_geekster wrote:

  Boatmoter, welcome to the forum.

  Have you checked to see if the computer is overheating all in game.  Games is intense and can cause a heat.  This can certainly cause the computer to reboot unexpectedly.  There are many FREE programs that you can use to check the time.

• S2240L, why I can't watch HD iTunes on my screen?

  Hi, I have a S2240L connected to my XPS via VGA.  I use Windows 8.1 (64-bit), and I have an AMD Radeon HD graphics card 7700, with Intel Core i7-3770, 16 GB of ram.   (Is this necessary info? Sorry, I'm a little new to this).  I have a few iTunes HD movies and I can watch them very well on my iPad, but whenever I try to play them on my PC, it says that the display is not HDCP-compatible and I can play SD I searched online a little and saw some info that says that the S2240L is compatible with HDCP , so why can't see HD movies? Any info is appreciated!

  Tae-Yeong

  VGA is not HDCP. The HDMI port on the display is HDCP.

• Noise maps after installation NIVIDA GeForce graphics and sound on HP compac 7700 computer

  Computer HP 7700 Compac, Win 7, 32 bit, card NIVIDA GeForce 310, StarTech sound car. Noise loud high frequency on the rare occasions necessary turn off the computer.  Works OK for a while after switch on. Same thing happned with three other graphics cards.

  Hello:

  You need a sound card.

  I assume that you have installed a video card with HDMI output (as most of them come with HDMI today).

  After that, the PC turns off both the onboard audio and video on board because he thinks that you have installed a video card and a sound card because of the HDMI audio chip on the video card.

  To activate the sound edge even once, you start in the BIOS, you go into the menu of the device on board and you will find an audio setting embedded (which did not exist before).

  You will also see that the setting is disabled. You change the setting to enabled, save it by pressing the F10 key at this time here and again when you exit the BIOS (save settings and exit).

  Restarts, the integrated audio system is restored, and you will have audio HDMI if you plug an HDMI cable to the HDMI port to a TV output.

  This happens on the dc7800 model too but, curiously, he did not on my dc7600.

  Paul

• Problems of storage controller AMD with a 3 TB HARD drive

  I recently bought a 3to HDD Seagate to use as remote storage / secondary. It seems that AMD has not updated its storage controller to recognize > 2 TB yet. I can't find drivers for my chipset anywhere at least. And it seems that nobody running them an AMD chipset is upgrading the HARD drive past 2 TB? I know that Intel has released an update for their controller that corrects this problem. Everything is available for the AMD controller like that?

  HP Pavilion HPE H8-1214

  MS Windows 7 Home Premium 64 - bit SP1

  Processor core AMD FX-6100 6

  10 gig Ram

  Gigabyte 2AC8 Mothermoard

  AMD Radeon HD series 7700 Gfx

  1465 GB Seagate ST1500DL003 - 9VT1 SCSI Disk Device (RAID) primary (installed HP)
  2930 GB Seagate ST3000DM001 - 1CH1 SCSI Disk Device (RAID) secondary (the problem drive)

  Gigabyte has no mention of this existing motherboard on their support site.

  AMD has nothing about their storage on them controllers.

  I can see all 3 TB in disk management, but I can't partition beyond 2.2 to. The last 746,52 Go will be unusable.

  AMD AHCI compatible RAID Controller driver version 3.3.1545.14 and Microsoft says it's the most up-to-date

  Any help with this would be great. Thank you!

  Hello:

  Here is the link to the latest AMD SATA RAID drivers.  Second file on the list.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  That's all the help I can offer because I do not know why all the 3 TB of the drive is not visible in a big partiton unless you don't format it to GPT.

  So that all 3 TB be seen in a single partition, the drive must be in the GPT format.

  Here is a white paper from HP on TPG from a PC business...

  http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c02826744-1%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• Problems with BSOD in Win7sp1, x 0124

  Hi all

  I have a problem. I have a Win7SP1 Pro on my pc at home.

  If I have a game running like the shadows of Mordor, then nothing will (normally) not, game pieces, if I leave it alone for an indefinite period of time (99% of the time), all right.

  If I leave the PC alone without game and show the office then after 5 to 15 minutes, the PC will be BSOD with error 0 x 00000124.

  The accident analysis WinDBG is pasted at the end of this way. (I do not know how the symbols work in windbg have not pasted in)

  Can someone point me in the right direction for this please? I have disabled people of the screen saver, the parameters of high power Performance, "Never" set to the value "Off the display" and "put the computer to sleep. 'Disable hard drive' was set at 20 minutes, so I changed it to 180 and see if that makes a difference.

  I use a processor i5-4590, mboard D3H H97M, 8 GB of ram and an AMD Radeon HD 7700 display.

  I didn't update all motherboard drivers yet but will soon. PC works when I use it and never a BSOD when I'm at the keyboard, so I can't believe its heat related.

  Anyone got any ideas please?

  Thank you very much!

  FAULTING_MODULE: fffff80003402000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  BUGCHECK_STR: 0x124_GenuineIntel

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17298 (debuggers (dbg). 141024-1500) amd64fre

  STACK_TEXT:
  fffff800 '03c13a98 fffff800' 039ffa3b: fffffa80 00000000'00000124 00000000'00000000 ' 070b 4028 00000000' bf800000: nt + 0x735c0
  "fffff800 '03c13aa0 00000000' 00000124: 00000000 ' 00000000 fffffa80 ' 070b 4028 00000000' 00000000'00200401 bf800000: hal + 0x12a3b
  fffff800'03c13aa8 00000000' 00000000: fffffa80 '070b 4028 00000000' bf800000 00000000'00200401 fffffa80' 06f37bd0: 0 x 124

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: GenuineIntel

  Nom_image: GenuineIntel

  IMAGE_VERSION:

  BUCKET_ID: WRONG_SYMBOLS

  FAILURE_BUCKET_ID: WRONG_SYMBOLS

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:wrong_symbols

  FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}

  Follow-up: MachineOwner

  They are called BCC124 and are related to the material.  Read how to diagnose and, hopefully, correct in this wiki

• New HP OfficeJet Pro 8600 more - can I install and use the 2nd tray of my HP OfficeJet Pro 7700?

  I would like to install the 2nd tray of my old HP Office Jet Pro 7700 under my new of OfficeJet Pro 8600.  Can I do this?

  The 2nd of the Officejet Pro 8600 paper tray is quite different from the 2nd series printers Officejet L7700 paper tray.

  * The 2nd tray for L7700 series is compatible with: L7580, L7680, L7780, L7550, L7650, L7480, L7750, L7590 and L7555.

  Click on the link provided here to access the HP Shopping site where you can buy the tray paper 8600 2nd.  The current price is $79.99 usd.

• What is the significance of the CURSOR WITH HOLD clause in a cursor declaration?

  What is the significance of the CURSOR WITH HOLD clause in a cursor declaration?

  A cursor that has been declared with the clause WITH HOLD, after the word CURSOR remains open after a COMMIT or a ROLLBACK. The following example shows how to use the following clause:

       EXEC SQL          DECLARE C1 CURSOR WITH HOLD          FOR SELECT ENAME FROM EMP          WHERE EMPNO BETWEEN 7600 AND 7700      END-EXEC.
  

  The cursor must not be declared for the UPDATE. The WITH HOLD clause is used in DB2 to override the default, which is to close all cursors on validation. Pro * COBOL provides this clause in order to facilitate the migration of applications to DB2 to Oracle. When MODE = ANSI, use Oracle DB2 default, but all host variables must be declared in a declare Section.

  Reference:

  Oracle documentation!
  http://docs.Oracle.com/CD/B10501_01/AppDev.920/a96109/pco03dbc.htm

• Lightroom CC/6.3 slow down with use

  Hi all

  I have searched the forum and read many responses and tried a number of proposed solutions and am coming at the end of my tether. My voice can be added to the chorus of 'Lightroom CC short miserably slow'. For me in the past few days the specific problem that was after about 10-15 minutes of use LR slows down and becomes unstable, requiring a Windows 'end of task"command. This happened earlier while I was working in the library module, re-keywording within a collection that contains about 500 photos. Selection of about 20 photos and remove them from the collection set LR kneeling. Other operations that cause slowdowns are publish and export measures. But even during the selection of 3 or 4 pictures in order to apply the keywords a second ago or two of delay before the photo is selected, even when I just started LR - and the longest LR is open, the slower, he gets. It's AGONIZING.

  Here are the facts on my system:

  Version of Lightroom: CC 2015.3 [1052427]

  Operating system: Windows 10

  System architecture: x 64

  Number of logical CPUs: 4

  Processor speed: 3.4 GHz (i5)

  Built-in memory: 12173,8 MB

  Real memory for Lightroom: 12173,8 MB

  Real memory used by Lightroom: 898,3 MB (7.3%)

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200, 2) 1680 x 1050

  Graphic processor Info: AMD Radeon HD 7700

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13416 context 15.300.1025.1001 the base profile

  Renderer: AMD Radeon R7 200 series

  • My boot drive is an SSD, but also the drive on which is installed the Lightroom and the catalogue
  • The LR SSD has a free space (more than 170 GB)
  • My main catalogue contains about 43000 pictures and the size of the catalog file is 1.4 GB
  • All my photos are on an array of Raid 2 - internal HD (with enough free space)
  • I optimized my catalog (several times!)
  • I deleted the folder preview.lrdata and rebuilt
  • Turn on/off the GPU support has no effect
  • The anti-virus does not scan photos or albums in Lightroom
  • None of my catalog photo places in the records accessed by Microsoft OneDrive or other synchronization services
  • My LR cache size is set to 40 GB

  Now, I know that I don't have the latest graphics card or the fastest system, but I know that under Windows 8/LR 5.x, I didn't have these problems. And I don't mean the develop module - my problems are mostly in the library module in what one might think are simple: scrolling, selection and Keywords.

  If there's something I forgot I would be happy to advice. Above all, I want to just Adobe to read and know that there is one more dissatisfied customer out there who is dying just for the fixed program.

  Cheers, Sara

  It's the topic done dj_paige refers to:

  is there a way to speed up scrolling library inches?

  You can also try to work with the metadata Panel completely closed. Do a right click on a header Panel and uncheck the "metadata".

  

• How to make a sum of text_field or column with where condition?

  Hi all

  In Oracle forms 6i, I created a form in which there are 5 text_Items (with 20 none of the displayed fields) namely ACCOUNT FD DO, AMOUNT, INTEREST RATE, STATUS and INTEREST_YEAR.

  FD ACCOUNT NO.	AMOUNT	INTEREST RATE	STATUS	INTEREST_YEAR
  47665	50000	11.5	E	5750
  37463	60000	12	D	7200
  47651

  100000

  1. 12.5

  D

  12500

  34766

  70000

  11

  E

  7700

  I want to make the sum of the INTEREST_YEAR where status = 'E '.

  I created a TOTAL_INTEREST_YEAR name field in which I want to display the sum.

  How the sum with where condition?

  Thank you.

  Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production

  Oracle form Builder 6i.

  Michael,

  When you write the formula for a calculated item, it does not use PL/SQL expressions (to include built-in DECODING) in Forms 6i.  If there was no conditional control over your calculation, you can simply make your article a summary point and perform the summation over column interest_rate .  However, because your calculation depends on the value in the STATUS column, you will need to use a combination of a calculated item and a summary article because you can't use an IF, DECODE or any other PL/SQL statement in the formula for the calculated item.  Therefore, you need to create a function in the knot of program units and call the function in your formula.  I tested it using the following code and it worked correctly.

  First, create the following function in the node of the object browser program units.

  FUNCTION calc_interest RETURN NUMBER IS
       n_ret_val  NUMBER := 0;
   BEGIN
     IF ( :YOUR_BLOCK.STATUS = 'E' ) THEN
         n_ret_val := :YOUR_BLOCK.interest_rate;
     END IF;
     RETURN n_ret_val;
  END calc_interest;
  

  First, you must change the property to BLOCK request all archives = Yes

  Then, open the palette of your calculated item property, and set the following properties:

  1. calculation = Formula

  2 property Forumla = CALC_INTEREST

  3. point data base = No.

  Now create a second item in the table not based on in your block that will display the amount of the interests summarized.  Open the palette property for this element and set the following properties:

  1 Data Type = number

  2 calculation Mode = Summary

  3. function = sum

  4 summarizes point = "name of your element calculated.

  5 base of data point = No.

  6 canvas = "your canvas.

  When you query your block, you should see the sum of all records where STATUS = 'E '.

  It worked for me, in my example form that I created so this should work for you.

  Craig...

• Black odd "burn" brushes when I press with Tablet

  Hey everybody,

  I get this weird, almost pixelated burn in my brush whenever I push down my pen on my Intuos4 tablet.

  

  It happens with ALL of my brushes regardless of presets or any form of textures or effects I have on them. This image comes from a document of costs, there are no filters or other effects running. Just a brush color producing these odd pixels. I use Adobe Photoshop CS6 on Windows 7, Intel Core processor i7 - 3770K CPU @ 3.50 GHz 3.90 Ghz - 8 GB RAM - AMD Radeon HD 7700 Series

  Let me know if any other information would be helpful. Any information that you guys have would be super useful because this is the most annoying thing ever.

  I'll leave this place because I have solved this 'me' and it might help future generations of dweebs. After realizing that the black pixelated occurred in gradients so, I did some simple research and found this link:

  k-pixels-in-8-bit-mode http://GraphicDesign.StackExchange.com/questions/15540/Photoshop-24-bit-image-Showing-blac

  Apparently, it is simply a problem with the drivers of AMD for the 7 - series HD and after a quick update, the problem disappeared completely.

• crossdomain. XML with Flash player 9.0.115.0

  Hi gurus,
  
  I just spent the better part of a day wading through the new features in Flash Player 9.0.115.0 security. I use the library of flash.socket, so I've discovered that I get this error message will get worse, that is to say, next version of Flash Player cannot connect even. Then, I got the good oil here.
  
  I wrote a crossdomain.xml file that looks like this (it's in the www-root directory):
  <? XML version = "1.0"? >
  < cross-domain-policy >
  < site permitted-cross-domain-policies of control = "master only" / >
  < allow-access-from domain = "192.168.5.201" to-ports = "7700" / >
  < / cross-domain-policy >
  
  Problem is that the reader flash adds the line follwing in the \Logs\policyFiles.txt it generates:
  WARNING: The 192.168.5.201 field does not specify a meta-policy. Meta-policy enforcement by default 'all '. This configuration is deprecated. See http://www.adobe.com/go/strict_policy_files to fix this problem.
  
  From my reading, I've specified a meta-policy with the line:
  < site permitted-cross-domain-policies of control = "master only" / >
  
  So my question is why it cannot find the meta-policy?

  Just thought that I should finish this.

  Today, I restarted my XP virtual machine and hey-presto that begins to operate. Further investigation led me to see that, for some reason, Firefox was not re-reading the crossdamain.xml file, but to instead stick with what he reads the first time, he is running (from a cold start).

  IE does not seem to suffer this caching, but at least I finally found why it did not work - it has not been read the changes that I made in the crossdomain.xml file.

  Kcell thanks for your time.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.